Sant Chansomsak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sant Chansomsak has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Gyuyong Kim
Department of Architectural Engineering, Chungnam National University, Daejeon, Republic of Korea
2 shared publications - Jeongsoo Nam
Department of Architectural Engineering, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Republic of Korea
2 shared publications - Sasui Sasui
Department of Architectural Engineering, Chungnam National University, Daejeon 34134, Korea
2 shared publications - Sirimas Hengrasmee
Department of Architecture, Naresuan University, Phitsanulok , Thailand
2 shared publications - Arie van Riessen
Future Battery Industries CRC, John de Laeter Research Centre, Curtin University, Perth, WA 6845, Australia
1 shared publication - Churl-Hee Cho
Chungnam National University
1 shared publication
Latest Publications
- Open Access
Incorporation of Waste Glass as an Activator in Class-C Fly Ash/GGBS Based Alkali Activated Material
In this study, an alkaline activator was synthesized by dissolving waste glass powder (WGP) in NaOH-4M solution to explore its effects on the formation of alkali-activated material (AAM) generated by Class-C fly ash (FA) and ground granulated blast furnace slag (GGBS). The compressive strength, flexure strength, porosity and water absorption were measured, and X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive X-ray (SEM-EDX) were used to study the crystalline phases, hydration mechanism and microstructure of the resulting composites. Results indicated that the composition of alkali solutions and the ratios of FA/GGBS were significant in enhancing the properties of the obtained AAM. As the amount of dissolved WGP increased in alkaline solution, the silicon concentration increased, causing the accelerated reactivity of FA/GGBS to develop Ca-based hydrate gel as the main reaction product in the system, thereby increasing the strength and lowering the porosity. Further increase in WGP dissolution led to strength loss and increased porosity, which were believed to be due to the excessive water demand of FA/GGBS composites to achieve optimum mixing consistency. Increasing the GGBS proportion in a composite appeared to improve the strength and lower the porosity owing to the reactivity of GGBS being higher than that of FA, which contributed to develop C-S-H-type hydration.
Open AccessIncorporation of Waste Glass as an Activator in Class-C Fly Ash/GGBS Based Alkali Activated Material
In this study, an alkaline activator was synthesized by dissolving waste glass powder (WGP) in NaOH-4M solution to explore its effects on the formation of alkali-activated material (AAM) generated by Class-C fly ash (FA) and ground granulated blast furnace slag (GGBS). The compressive strength, flexure strength, porosity and water absorption were measured, and X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive X-ray (SEM-EDX) were used to study the crystalline phases, hydration mechanism and microstructure of the resulting composites. Results indicated that the composition of alkali solutions and the ratios of FA/GGBS were significant in enhancing the properties of the obtained AAM. As the amount of dissolved WGP increased in alkaline solution, the silicon concentration increased, causing the accelerated reactivity of FA/GGBS to develop Ca-based hydrate gel as the main reaction product in the system, thereby increasing the strength and lowering the porosity. Further increase in WGP dissolution led to strength loss and increased porosity, which were believed to be due to the excessive water demand of FA/GGBS composites to achieve optimum mixing consistency. Increasing the GGBS proportion in a composite appeared to improve the strength and lower the porosity owing to the reactivity of GGBS being higher than that of FA, which contributed to develop C-S-H-type hydration.
- Open Access
Strength and Microstructure of Class-C Fly Ash and GGBS Blend Geopolymer Activated in NaOH & NaOH + Na2SiO3
In this paper, class-C fly ash (FA) and ground granulated blast-furnace slag (GGBS)-based geopolymer activated in NaOH and NaOH + Na2SiO3 was studied regarding setting time, compressive strength, porosity, microstructure, and formation of crystalline phases. When comparing the effects of alkali type on the FA and GGBS geopolymer composites, results revealed that NaOH has a lesser effect in developing strength and denser microstructure than does NaOH + Na2SiO3, since the addition of Na2SiO3 provides the silica source to develop more compact structure. Incorporation of Na2SiO3 reduced the crystallinity and the paste was more amorphous compared to NaOH activated pastes. The class-C FA and GGBS blends resulted in prolonged setting time, reduced strength, and loose matrix with the increase in fly ash content. The un-reactivity of calcium in blends was observed with increasing fly ash content, leading to strength loss. It is evident from XRD patterns that calcium in fly ash did not contribute in forming C-S-H bond, but formation of crystalline calcite was observed. Furthermore, XRD analyses revealed that the reduction in fly ash leads to the reduction in crystallinity, and SEM micrographs showed the unreactive fly ash particles, which hinder the formation of a denser matrix.
Open AccessStrength and Microstructure of Class-C Fly Ash and GGBS Blend Geopolymer Activated in NaOH & NaOH + Na2SiO3
In this paper, class-C fly ash (FA) and ground granulated blast-furnace slag (GGBS)-based geopolymer activated in NaOH and NaOH + Na2SiO3 was studied regarding setting time, compressive strength, porosity, microstructure, and formation of crystalline phases. When comparing the effects of alkali type on the FA and GGBS geopolymer composites, results revealed that NaOH has a lesser effect in developing strength and denser microstructure than does NaOH + Na2SiO3, since the addition of Na2SiO3 provides the silica source to develop more compact structure. Incorporation of Na2SiO3 reduced the crystallinity and the paste was more amorphous compared to NaOH activated pastes. The class-C FA and GGBS blends resulted in prolonged setting time, reduced strength, and loose matrix with the increase in fly ash content. The un-reactivity of calcium in blends was observed with increasing fly ash content, leading to strength loss. It is evident from XRD patterns that calcium in fly ash did not contribute in forming C-S-H bond, but formation of crystalline calcite was observed. Furthermore, XRD analyses revealed that the reduction in fly ash leads to the reduction in crystallinity, and SEM micrographs showed the unreactive fly ash particles, which hinder the formation of a denser matrix.
- Open Access
- 1 April 2018
- Published by Óbuda University in YBL Journal of Built Environment
- Vol. 6 (1) , 20-36
Spatial Configuration and Users’ Behavior in Co-Working Spaces
This paper aims to examine whether there is a direct relationship between spatial configuration and users’ behaviors in co-working spaces, and if so, how this environment and behavior relationship impacts their working process. The study employed ethnographic qualitative strategy as the general method of inquiry and used visual documentation, direct observations, and behavioral mapping as methods of data collection in two case studies. Analysis of the findings demonstrates that design elements such as barriers and fields are powerful tools for influencing and guiding users’ behavior within coworking spaces. The findings provide a deeper understanding of the relationship between design and behavioral patterns in co-working spaces. The research insights in this study may inform architects, policymakers and facility managers in making conscious decisions on the design of co-working spaces that are more meaningful to the users.
- 1 April 2018
- Published by Óbuda University in YBL Journal of Built Environment
- Vol. 6 (1) , 20-36
Open AccessSpatial Configuration and Users’ Behavior in Co-Working Spaces
This paper aims to examine whether there is a direct relationship between spatial configuration and users’ behaviors in co-working spaces, and if so, how this environment and behavior relationship impacts their working process. The study employed ethnographic qualitative strategy as the general method of inquiry and used visual documentation, direct observations, and behavioral mapping as methods of data collection in two case studies. Analysis of the findings demonstrates that design elements such as barriers and fields are powerful tools for influencing and guiding users’ behavior within coworking spaces. The findings provide a deeper understanding of the relationship between design and behavioral patterns in co-working spaces. The research insights in this study may inform architects, policymakers and facility managers in making conscious decisions on the design of co-working spaces that are more meaningful to the users.
- 1 July 2014
- Published by Global Science and Technology Forum in GSTF Journal of Engineering Technology
- Vol. 3 (1)
Potential of Self-reliant Lifestyle for a Single House in Housing Development Projects
- 1 July 2014
- Published by Global Science and Technology Forum in GSTF Journal of Engineering Technology
- Vol. 3 (1)
Potential of Self-reliant Lifestyle for a Single House in Housing Development Projects