Qianqian Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qianqian Li has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Catherine Tonry
School of Computing and Mathematical Sciences, Faculty of Engineering and Science, University of Greenwich, London, UK
2 shared publications Christopher M. Gourlay
Imperial College London
2 shared publicationsZhuocheng Xu
Imperial College London
2 shared publications- Zhuocheng Xu
Department of Aeronautics, Faculty of Engineering, Imperial College London, London, UK; Department of Mechanical Engineering, Faculty of Engineering, Imperial College London, London, UK
2 shared publications - Andrew Kao
Centre for Numerical Modelling and Process Analysis, University of Greenwich, Old Royal Naval College, Park Row, London SE10 9LS, UK
1 shared publication - Christopher Beckwith
School of Computing and Mathematical Sciences, Faculty of Engineering and Science, University of Greenwich, London, UK
1 shared publication
Latest Publications
- Open Access
- 17 October 2025
- Published by Elsevier in Materials & Design
- Vol. 260
Measurements of the cohesive and piezoresistive responses of polylactide/carbon nanotube nanocomposites made from solution-casting
- 17 October 2025
- Published by Elsevier in Materials & Design
- Vol. 260
Open AccessMeasurements of the cohesive and piezoresistive responses of polylactide/carbon nanotube nanocomposites made from solution-casting
- Open Access
- 18 July 2025
- Published by Elsevier in Ultrasonics Sonochemistry
- Vol. 120, 107472
High-speed imaging of CNT deagglomeration in aqueous solution with surfactant
- 18 July 2025
- Published by Elsevier in Ultrasonics Sonochemistry
- Vol. 120, 107472
Open AccessHigh-speed imaging of CNT deagglomeration in aqueous solution with surfactant
- 3 March 2025
- Published by Springer Nature
- p. 1071-1076
Investigating the Castability of Recycling AZ91 Machining Chips Through Shape Casting
- 3 March 2025
- Published by Springer Nature
- p. 1071-1076
Investigating the Castability of Recycling AZ91 Machining Chips Through Shape Casting
- Open Access
- 20 July 2024
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 282
Meso-scale finite element modelling of biaxial non-crimp-fabric composites under compression
- 20 July 2024
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 282
Open AccessMeso-scale finite element modelling of biaxial non-crimp-fabric composites under compression
- Open Access
- 3 July 2024
- Published by Elsevier in Materials & Design
- Vol. 244
Grain refinement of magnesium castings using recycled machining chips
- 3 July 2024
- Published by Elsevier in Materials & Design
- Vol. 244
Open AccessGrain refinement of magnesium castings using recycled machining chips
- Open Access
An Improved Approach to Manufacture Carbon Nanotube Reinforced Magnesium AZ91 Composites with Increased Strength and Ductility
Multiwalled carbon nanotubes (MWCNTs) are decorated with Pt nanoparticles by a “layer-by-layer” approach using poly (sodium 4-styrene sulfonate) (PSS) and poly (diallyl dimethylammonium chloride) (PDDA). Transmission electron microscopy (TEM) images and Energy Dispersive X-ray (EDX) analysis of the samples confirm Pt deposition on surfaces of CNTs. Dispersibility and dispersion stability of MWCNTs in the solvents are enhanced when MWCNTs are coated with Pt nanoparticles. Mg AZ91 composites reinforced with MWCNTs are then produced by a melt stirring process. Compression tests of the composites show that adding 0.05% wt Pt-coated MWCNTs in AZ91 improves the composite’s mechanical properties compared to the pure AZ91 and pristine MWCNT/AZ91. Fracture surface analysis of the composite using a scanning electron microscope (SEM) shows individual pulled out MWCNTs in the case of the Pt-coated MWCNT/AZ91 composites. This finding can be attributed to the uniform dispersion of Pt-coated MWCNTs in Mg due to the improved wettability of Pt-coated MWCNTs in Mg melts. The study of the pull-out behaviour of pristine and Pt-coated CNTs from an Mg matrix using molecular dynamics simulation supports this interpretation.
Open AccessAn Improved Approach to Manufacture Carbon Nanotube Reinforced Magnesium AZ91 Composites with Increased Strength and Ductility
Multiwalled carbon nanotubes (MWCNTs) are decorated with Pt nanoparticles by a “layer-by-layer” approach using poly (sodium 4-styrene sulfonate) (PSS) and poly (diallyl dimethylammonium chloride) (PDDA). Transmission electron microscopy (TEM) images and Energy Dispersive X-ray (EDX) analysis of the samples confirm Pt deposition on surfaces of CNTs. Dispersibility and dispersion stability of MWCNTs in the solvents are enhanced when MWCNTs are coated with Pt nanoparticles. Mg AZ91 composites reinforced with MWCNTs are then produced by a melt stirring process. Compression tests of the composites show that adding 0.05% wt Pt-coated MWCNTs in AZ91 improves the composite’s mechanical properties compared to the pure AZ91 and pristine MWCNT/AZ91. Fracture surface analysis of the composite using a scanning electron microscope (SEM) shows individual pulled out MWCNTs in the case of the Pt-coated MWCNT/AZ91 composites. This finding can be attributed to the uniform dispersion of Pt-coated MWCNTs in Mg due to the improved wettability of Pt-coated MWCNTs in Mg melts. The study of the pull-out behaviour of pristine and Pt-coated CNTs from an Mg matrix using molecular dynamics simulation supports this interpretation.
- Open Access
- 21 April 2022
- Published by Springer Nature in JOM
- Vol. 74 (6) , 2470-2483
High-Speed Imaging of the Ultrasonic Deagglomeration of Carbon Nanotubes in Water
Ultrasonic treatment is effective in deagglomerating and dispersing nanoparticles in various liquids. However, the exact deagglomeration mechanisms vary for different nanoparticle clusters, owing to different particle geometries and inter-particle adhesion forces. Here, the deagglomeration mechanisms and the influence of sonotrode amplitude during ultrasonication of multiwall carbon nanotubes in de-ionized water were studied by a combination of high-speed imaging and numerical modeling. Particle image velocimetry was applied to images with a higher field of view to calculate the average streaming speeds distribution. These data allowed direct comparison with modeling results. For images captured at higher frame rates and magnification, different patterns of deagglomeration were identified and categorized based on different stages of cavitation zone development and for regions inside or outside the cavitation zone. The results obtained and discussed in this paper can also be relevant to a wide range of carbonaceous and other high aspect ratio nanomaterials.
- 21 April 2022
- Published by Springer Nature in JOM
- Vol. 74 (6) , 2470-2483
Open AccessHigh-Speed Imaging of the Ultrasonic Deagglomeration of Carbon Nanotubes in Water
Ultrasonic treatment is effective in deagglomerating and dispersing nanoparticles in various liquids. However, the exact deagglomeration mechanisms vary for different nanoparticle clusters, owing to different particle geometries and inter-particle adhesion forces. Here, the deagglomeration mechanisms and the influence of sonotrode amplitude during ultrasonication of multiwall carbon nanotubes in de-ionized water were studied by a combination of high-speed imaging and numerical modeling. Particle image velocimetry was applied to images with a higher field of view to calculate the average streaming speeds distribution. These data allowed direct comparison with modeling results. For images captured at higher frame rates and magnification, different patterns of deagglomeration were identified and categorized based on different stages of cavitation zone development and for regions inside or outside the cavitation zone. The results obtained and discussed in this paper can also be relevant to a wide range of carbonaceous and other high aspect ratio nanomaterials.