Amit Kumar Bhattacharjee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Amit Kumar Bhattacharjee has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Issa Batarseh
University of Central Florida, Orlando, FL, USA
4 shared publications - Nasser Kutkut
EECS, University of Central Florida, Orlando, Florida United States 32826
1 shared publication
Latest Publications
- 12 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (6) , 4790-4800
An Interleaved Boost and Dual Active Bridge-Based Single-Stage Three-Port DC–DC–AC Converter With Sine PWM Modulation
In this article, a new three-port converter is proposed that interfaces two dc voltage sources of different magnitudes and an output ac port in a single stage. The proposed converter is primarily based on the dual active bridge topology where the secondary bridge is composed of four quadrant bidirectional switches, which allows it to be directly connected to an ac port. The primary bridge can also be used as an interleaved bidirectional boost converter by connecting two inductors across the transformer primary, which forms an additional input DC port. The power flow between the dc ports to the ac port is based on dual phase-shift modulation where a phase shift is introduced between the two legs of the primary bridge switches and another phase shift between the primary and secondary bridges. This enables the standard sine pulsewidth modulation to be used for synthesizing ac output. For the power flow mode between the two dc ports alone, a parallel boost modulation is proposed that improves the system efficiency by removing any circulating current introduced by traditional interleaving. The proposed converter achieves fully soft switched three-port power conversion with a reduced number of active devices compared to the existing topologies. The modulation scheme is also much simpler and requires no optimization or complex control. A PowerSim-based simulation program is used for validating the proposed converter. A 200-W prototype is built to experimentally verify the theoretical analysis of the proposed converter.
- 12 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (6) , 4790-4800
An Interleaved Boost and Dual Active Bridge-Based Single-Stage Three-Port DC–DC–AC Converter With Sine PWM Modulation
In this article, a new three-port converter is proposed that interfaces two dc voltage sources of different magnitudes and an output ac port in a single stage. The proposed converter is primarily based on the dual active bridge topology where the secondary bridge is composed of four quadrant bidirectional switches, which allows it to be directly connected to an ac port. The primary bridge can also be used as an interleaved bidirectional boost converter by connecting two inductors across the transformer primary, which forms an additional input DC port. The power flow between the dc ports to the ac port is based on dual phase-shift modulation where a phase shift is introduced between the two legs of the primary bridge switches and another phase shift between the primary and secondary bridges. This enables the standard sine pulsewidth modulation to be used for synthesizing ac output. For the power flow mode between the two dc ports alone, a parallel boost modulation is proposed that improves the system efficiency by removing any circulating current introduced by traditional interleaving. The proposed converter achieves fully soft switched three-port power conversion with a reduced number of active devices compared to the existing topologies. The modulation scheme is also much simpler and requires no optimization or complex control. A PowerSim-based simulation program is used for validating the proposed converter. A 200-W prototype is built to experimentally verify the theoretical analysis of the proposed converter.
- 24 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (5) , 4804-4818
Optimum Hybrid Modulation for Improvement of Efficiency Over Wide Operating Range for Triple-Phase-Shift Dual-Active-Bridge Converter
Triple-phase-shift modulation of a dual-active-bridge converter allows soft switching over the complete power flow range due to additional degree of freedom control over the transformer current. Optimization of conduction angles and a phase shift between the primary and secondary bridges can allow minimized rms and peak current, which directly influence device stress and conduction and switching losses. However, the existing state of the art addresses this by using either an offline optimization-based controller or large offline data-based methods, which are expensive and require excessive resources. In this article, a piecewise model of the modulation scheme is developed, which allows analytical optimization. In addition, soft-switching conditions are included in the optimization framework allowing a complete solution, which reduces both conduction and switching losses. Finally, a hybrid controller has been proposed based on the generalized optimization results. It utilizes the optimum modulation for a given power and ensures the highest efficiency over a wide operating range. The model, the optimization framework, and the hybrid controller were developed theoretically and simulated in the MATLAB environment. A 200-W prototype was built as a proof of concept. The optimization results and the proposed controller were experimentally verified with good agreement to the theoretical analysis.
- 24 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (5) , 4804-4818
Optimum Hybrid Modulation for Improvement of Efficiency Over Wide Operating Range for Triple-Phase-Shift Dual-Active-Bridge Converter
Triple-phase-shift modulation of a dual-active-bridge converter allows soft switching over the complete power flow range due to additional degree of freedom control over the transformer current. Optimization of conduction angles and a phase shift between the primary and secondary bridges can allow minimized rms and peak current, which directly influence device stress and conduction and switching losses. However, the existing state of the art addresses this by using either an offline optimization-based controller or large offline data-based methods, which are expensive and require excessive resources. In this article, a piecewise model of the modulation scheme is developed, which allows analytical optimization. In addition, soft-switching conditions are included in the optimization framework allowing a complete solution, which reduces both conduction and switching losses. Finally, a hybrid controller has been proposed based on the generalized optimization results. It utilizes the optimum modulation for a given power and ensures the highest efficiency over a wide operating range. The model, the optimization framework, and the hybrid controller were developed theoretically and simulated in the MATLAB environment. A 200-W prototype was built as a proof of concept. The optimization results and the proposed controller were experimentally verified with good agreement to the theoretical analysis.
- 23 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (1) , 422-435
Sinusoidally Modulated AC-Link Microinverter Based on Dual-Active-Bridge Topology
In this paper, a bidirectional single stage AC link microinverter is proposed with a novel sine PWM modulation. The proposed microinverter operates on the principles of dual active bridge converter modulation and thus allow seamless bidirectional power flow with soft switching. Contrary to traditional two stage microinverter interfacing a variable input voltage source, proposed converter integrates the DC-DC and DC-AC into a single stage, retaining functionality over wide input to output voltage ratio. The synthesis of sinusoidal output is achieved by applying the new composite modulation scheme that utilizes phase shift modulation schemes used in dual active bridge converter. Different parameters of the phase shift modulation (namely, triple phase shift modulation) affects the overall composite modulation in terms of its ability to achieve soft switching and the average power flow. The mode analysis was carried out to demonstrate the different modulation segments and its overall effect on the output power, efficiency, total harmonic distortion etc. Previous works on similar topology requires computationally intensive optimal modulation methods which updates every switching cycle. However, proposed modulation parameters are analytically determined, hence the controller only updates every line cycle, which is a significant reduction of control complexity. The proposed converter and modulation scheme is designed and simulated in PSIM environment which supports the theoretical analysis. A prototype was built for experimental study. Results verifying the modulation scheme and the working principles of the converter are presented.
- 23 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (1) , 422-435
Sinusoidally Modulated AC-Link Microinverter Based on Dual-Active-Bridge Topology
In this paper, a bidirectional single stage AC link microinverter is proposed with a novel sine PWM modulation. The proposed microinverter operates on the principles of dual active bridge converter modulation and thus allow seamless bidirectional power flow with soft switching. Contrary to traditional two stage microinverter interfacing a variable input voltage source, proposed converter integrates the DC-DC and DC-AC into a single stage, retaining functionality over wide input to output voltage ratio. The synthesis of sinusoidal output is achieved by applying the new composite modulation scheme that utilizes phase shift modulation schemes used in dual active bridge converter. Different parameters of the phase shift modulation (namely, triple phase shift modulation) affects the overall composite modulation in terms of its ability to achieve soft switching and the average power flow. The mode analysis was carried out to demonstrate the different modulation segments and its overall effect on the output power, efficiency, total harmonic distortion etc. Previous works on similar topology requires computationally intensive optimal modulation methods which updates every switching cycle. However, proposed modulation parameters are analytically determined, hence the controller only updates every line cycle, which is a significant reduction of control complexity. The proposed converter and modulation scheme is designed and simulated in PSIM environment which supports the theoretical analysis. A prototype was built for experimental study. Results verifying the modulation scheme and the working principles of the converter are presented.
- Top Cited Papers
- 27 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (2) , 1431-1445
Review of Multiport Converters for Solar and Energy Storage Integration
This paper presents a comprehensive review of multiport converters for integrating solar energy with energy storage systems. With recent development of battery as a viable energy storage device, the solar energy is transforming into a more reliable and steady source of power. Research and development of multiport converters is instrumental in enabling this transformation in an efficient manner. The high efficiency of conversion in comparatively smaller footprint makes a multiport converter very attractive in this application. Most of the recently reported multiport converter topologies are discussed here. A breakdown of isolated and non-isolated topologies is presented along with comparison of converter architectures and features such as operating conditions, device count, efficiency etc. Each group of multiport converters are subdivided into different smaller groups based on their architecture. Detailed specification are presented for important topologies. Finally, a performance comparison is carried out featuring the advantages and disadvantages of the various topologies leading to suggestions for the direction of future research.
- 27 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (2) , 1431-1445
Top Cited PapersReview of Multiport Converters for Solar and Energy Storage Integration
This paper presents a comprehensive review of multiport converters for integrating solar energy with energy storage systems. With recent development of battery as a viable energy storage device, the solar energy is transforming into a more reliable and steady source of power. Research and development of multiport converters is instrumental in enabling this transformation in an efficient manner. The high efficiency of conversion in comparatively smaller footprint makes a multiport converter very attractive in this application. Most of the recently reported multiport converter topologies are discussed here. A breakdown of isolated and non-isolated topologies is presented along with comparison of converter architectures and features such as operating conditions, device count, efficiency etc. Each group of multiport converters are subdivided into different smaller groups based on their architecture. Detailed specification are presented for important topologies. Finally, a performance comparison is carried out featuring the advantages and disadvantages of the various topologies leading to suggestions for the direction of future research.