Ardiaty Arief
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ardiaty Arief has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Muhammad Bachtiar Nappu
5 shared publications- Muhammad Bachtiar Nappu
Hasanuddin University
5 shared publications - Amil Ahmad Ilham
Department of Informatics, Universitas Hasanuddin, Jl. Poros Malino Km. 6, Bontomarannu, Gowa, Sulawesi Selatan 92171, Indonesia
2 shared publications - Andani Achmad
Universitas Hasanuddin
2 shared publications - Deny Wiria Nugraha
Universitas Tadulako
2 shared publications M B Nappu
Centre for Research and Development on Energy and Electricity, Universitas Hasanuddin, Makassar 90245, Indonesia
2 shared publications
Latest Publications
- Open Access
- 1 April 2025
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 14 (2) , 1391-1406
Transformers for aerial images semantic segmentation of natural disaster-impacted areas in natural disaster assessment
Aerial image segmentation of natural disaster-impacted areas and detailed and automatic natural disaster assessment are the main focus of this study. Detecting and recognizing objects on aerial images of areas impacted by natural disasters and assessing natural disaster-impacted areas are still difficult problems. To solve these problems, this study utilizes four of the latest transformer-based semantic segmentation network models, bidirectional encoder representation from image transformers (BEIT), dense prediction transformer (DPT), OneFormer, and SegFormer, and proposes a detailed and automatic natural disaster assessment of the segmented image. The SegFormer model achieved the first-best result, and the OneFormer model achieved the second-best result. The SegFormer model outperformed OneFormer by 1.58% higher for the mean accuracy value and 4.28% for the mean intersection over union (mIoU) value. All receiver operating characteristics (ROC) curves have mean area under curve (AUC) values above 0.9, which means that the SegFormer model performs well in generating semantic segmentation images. The fuzzy c-means (FCM) clustering algorithm performed well and could automatically cluster the natural disaster assessments into four categories. This study has produced semantic segmentation of aerial images of areas impacted by natural disasters and natural disaster assessments, which can be used in natural disaster management systems.
- 1 April 2025
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 14 (2) , 1391-1406
Open AccessTransformers for aerial images semantic segmentation of natural disaster-impacted areas in natural disaster assessment
Aerial image segmentation of natural disaster-impacted areas and detailed and automatic natural disaster assessment are the main focus of this study. Detecting and recognizing objects on aerial images of areas impacted by natural disasters and assessing natural disaster-impacted areas are still difficult problems. To solve these problems, this study utilizes four of the latest transformer-based semantic segmentation network models, bidirectional encoder representation from image transformers (BEIT), dense prediction transformer (DPT), OneFormer, and SegFormer, and proposes a detailed and automatic natural disaster assessment of the segmented image. The SegFormer model achieved the first-best result, and the OneFormer model achieved the second-best result. The SegFormer model outperformed OneFormer by 1.58% higher for the mean accuracy value and 4.28% for the mean intersection over union (mIoU) value. All receiver operating characteristics (ROC) curves have mean area under curve (AUC) values above 0.9, which means that the SegFormer model performs well in generating semantic segmentation images. The fuzzy c-means (FCM) clustering algorithm performed well and could automatically cluster the natural disaster assessments into four categories. This study has produced semantic segmentation of aerial images of areas impacted by natural disasters and natural disaster assessments, which can be used in natural disaster management systems.
- Open Access
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3145 (1) , 040003
Optimization of locations determination of distributed generation using Hybrid Flower Pollination Algorithm and β-Hill Climbing methods
This study aims to define the optimum location and size of distributed generation (DG) using the Hybrid Flower Pollination Algorithm (FPA) and β-Hill Climbing ( This study aims to define the optimum location and size of distributed generation (DG) using the Hybrid Flower Pollination Algorithm (FPA) and β-Hill Climbing (
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3145 (1) , 040003
Open AccessOptimization of locations determination of distributed generation using Hybrid Flower Pollination Algorithm and β-Hill Climbing methods
This study aims to define the optimum location and size of distributed generation (DG) using the Hybrid Flower Pollination Algorithm (FPA) and β-Hill Climbing ( This study aims to define the optimum location and size of distributed generation (DG) using the Hybrid Flower Pollination Algorithm (FPA) and β-Hill Climbing (
- Open Access
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3145 (1) , 020001
Aerial imagery segmentation of natural disaster-affected areas using deep convolutional networks for disaster assessment
After a natural disaster, aerial imagery from an unmanned aerial vehicle (UAV) is an invaluable resource for impact assessment and disaster management. Traditio After a natural disaster, aerial imagery from an unmanned aerial vehicle (UAV) is an invaluable resource for impact assessment and disaster management. Traditio
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3145 (1) , 020001
Open AccessAerial imagery segmentation of natural disaster-affected areas using deep convolutional networks for disaster assessment
After a natural disaster, aerial imagery from an unmanned aerial vehicle (UAV) is an invaluable resource for impact assessment and disaster management. Traditio After a natural disaster, aerial imagery from an unmanned aerial vehicle (UAV) is an invaluable resource for impact assessment and disaster management. Traditio
- 20 February 2023
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (2) , 84-89
Optimal hybrid renewable energy generation planning based on BSG-starcraft radius particle swarm optimization
This paper develops a new methodology to find the optimal size of hybrid renewable energy plants in a microgrid. The power plants planned in the microgrid for this study are photovoltaic (PV) and wind turbines (WT). In this paper, a new method is proposed, the BSG-Starcraft Radius Particle Swarm Optimization (PSO) algorithm, to determine two design variables: the number of PV panels and the number of wind turbines (WT) for the microgrid system in Maginti Island, Indonesia as a case study. The BSG-Starcraft Radius PSO algorithm is an improved method of the BSG-Starcraft PSO algorithm. The results obtained indicate that the proposed method gives the best results because it provides a more optimal configuration than the BSG-Starcraft PSO algorithm. The simulation results show that by using the proposed method, the BSG-Starcraft Radius PSO method, the number of PV panels is 335 andthe number ofWT is 186 turbines units with a total load power of 80 kW, and the investment value must be spent using the proposed BSG-Starcraft Radius PSO is$352,761.1. In contrast, the investment for the microgrid planning using the BSG-Starcraft Radius PSO is$355,265.1
- 20 February 2023
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (2) , 84-89
Optimal hybrid renewable energy generation planning based on BSG-starcraft radius particle swarm optimization
This paper develops a new methodology to find the optimal size of hybrid renewable energy plants in a microgrid. The power plants planned in the microgrid for this study are photovoltaic (PV) and wind turbines (WT). In this paper, a new method is proposed, the BSG-Starcraft Radius Particle Swarm Optimization (PSO) algorithm, to determine two design variables: the number of PV panels and the number of wind turbines (WT) for the microgrid system in Maginti Island, Indonesia as a case study. The BSG-Starcraft Radius PSO algorithm is an improved method of the BSG-Starcraft PSO algorithm. The results obtained indicate that the proposed method gives the best results because it provides a more optimal configuration than the BSG-Starcraft PSO algorithm. The simulation results show that by using the proposed method, the BSG-Starcraft Radius PSO method, the number of PV panels is 335 andthe number ofWT is 186 turbines units with a total load power of 80 kW, and the investment value must be spent using the proposed BSG-Starcraft Radius PSO is$352,761.1. In contrast, the investment for the microgrid planning using the BSG-Starcraft Radius PSO is$355,265.1
- 16 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 8786, 146-151
Implementation of wild horse optimization (WHO) method for optimal hybrid renewable energy designs
The use of renewable energy has been widely applied worldwide to reduce fossil energy use. A hybrid electric power system based on renewable energy is one of the solutions to produce maximum energy. In this paper, the hybrid systems discussed include photovoltaic (PV), wind turbine (WT), and battery storage (BS). This hybrid design system is very dependent on the load profile, potential energy sources, and geographical location of the research location. This research shows the technical design and capital cost of a hybrid electric power system that will be implemented as an alternative energy source for practical work on the Soroako Technical Academy or Akademi Teknik Soroako (ATS) vocational campus. Irradiance, temperature, average wind speed, and component sizing are the main parameters for the design. The technical analysis and capital cost design use MATLAB software with the wild horse optimization (WHO) algorithm. The results of the WHO analysis will be compared with the HOMER application. The results showed that the WHO algorithm method is better than the HOMER application, with a capital cost of $ 198,363.05 with a total of 772 PV units, 1 unit of WT, and 54 battery units.
- 16 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 8786, 146-151
Implementation of wild horse optimization (WHO) method for optimal hybrid renewable energy designs
The use of renewable energy has been widely applied worldwide to reduce fossil energy use. A hybrid electric power system based on renewable energy is one of the solutions to produce maximum energy. In this paper, the hybrid systems discussed include photovoltaic (PV), wind turbine (WT), and battery storage (BS). This hybrid design system is very dependent on the load profile, potential energy sources, and geographical location of the research location. This research shows the technical design and capital cost of a hybrid electric power system that will be implemented as an alternative energy source for practical work on the Soroako Technical Academy or Akademi Teknik Soroako (ATS) vocational campus. Irradiance, temperature, average wind speed, and component sizing are the main parameters for the design. The technical analysis and capital cost design use MATLAB software with the wild horse optimization (WHO) algorithm. The results of the WHO analysis will be compared with the HOMER application. The results showed that the WHO algorithm method is better than the HOMER application, with a capital cost of $ 198,363.05 with a total of 772 PV units, 1 unit of WT, and 54 battery units.
- Open Access
Energy Efficiency in Modern Power Systems Utilizing Advanced Incremental Particle Swarm Optimization–Based OPF
Since the power grid grows and the necessity for higher system efficiency is due to the increasing number of renewable energy penetrations, power system operators need a fast and efficient method of operating the power system. One of the main problems in a modern power system operation that needs to be resolved is optimal power flow (OPF). OPF is an efficient generator scheduling method to meet energy demands with the aim of minimizing the total production cost of power plants while maintaining system stability, security, and reliability. This paper proposes a new method to solve OPF by using incremental particle swarm optimization (IPSO). IPSO is a new algorithm of particle swarm optimization (PSO) that modifies the PSO structure by increasing the particle size, where each particle changes its position to determine its optimal position. The advantage of IPSO is that the population increases with each iteration so that the optimization process becomes faster. The results of the research on optimal power flow for energy generation costs, system voltage stability, and losses obtained by the IPSO method are superior to the conventional PSO method.
Open AccessEnergy Efficiency in Modern Power Systems Utilizing Advanced Incremental Particle Swarm Optimization–Based OPF
Since the power grid grows and the necessity for higher system efficiency is due to the increasing number of renewable energy penetrations, power system operators need a fast and efficient method of operating the power system. One of the main problems in a modern power system operation that needs to be resolved is optimal power flow (OPF). OPF is an efficient generator scheduling method to meet energy demands with the aim of minimizing the total production cost of power plants while maintaining system stability, security, and reliability. This paper proposes a new method to solve OPF by using incremental particle swarm optimization (IPSO). IPSO is a new algorithm of particle swarm optimization (PSO) that modifies the PSO structure by increasing the particle size, where each particle changes its position to determine its optimal position. The advantage of IPSO is that the population increases with each iteration so that the optimization process becomes faster. The results of the research on optimal power flow for energy generation costs, system voltage stability, and losses obtained by the IPSO method are superior to the conventional PSO method.
- Open Access
Novel Hybrid Modified Modal Analysis and Continuation Power Flow Method for Unity Power Factor DER Placement
Distributed energy resource (DER) has become an effective attempt in promoting use of renewable energy resources for electricity generation. The core intention of this study is to expand an approach for optimally placing several DER units to attain the most stable performance of the system and the greatest power losses decrease. The recommended technique is established on two analytical methods for analyzing voltage stability: the new modified modal analysis (MMA) and the continuation power flow (CPF) or MMA–CPF methods. The MMA evaluates voltage stability by considering incremental connection relating voltage and active power, which includes the eigenvalue and the related eigenvectors computed from the reduced modified Jacobian matrix. Furthermore, an active participation factor (APF) is computed from the eigenvectors of the reduced modified Jacobian matrix. The CPF method uses a predictor–corrector stepping pattern to reach the solution track and compute the tangent vector sensitivity (TVS). Both APF and TVS indicate each load bus sensitivity in the network. In addition, an objective function regarding losses decrease and eigenvalue is expressed to calculate the best bus position for DER allocation. The proposed MMA–CPF technique has been assessed on a 34-bus RDN and the outcomes demonstrate the effectiveness of the proposed scheme.
Open AccessNovel Hybrid Modified Modal Analysis and Continuation Power Flow Method for Unity Power Factor DER Placement
Distributed energy resource (DER) has become an effective attempt in promoting use of renewable energy resources for electricity generation. The core intention of this study is to expand an approach for optimally placing several DER units to attain the most stable performance of the system and the greatest power losses decrease. The recommended technique is established on two analytical methods for analyzing voltage stability: the new modified modal analysis (MMA) and the continuation power flow (CPF) or MMA–CPF methods. The MMA evaluates voltage stability by considering incremental connection relating voltage and active power, which includes the eigenvalue and the related eigenvectors computed from the reduced modified Jacobian matrix. Furthermore, an active participation factor (APF) is computed from the eigenvectors of the reduced modified Jacobian matrix. The CPF method uses a predictor–corrector stepping pattern to reach the solution track and compute the tangent vector sensitivity (TVS). Both APF and TVS indicate each load bus sensitivity in the network. In addition, an objective function regarding losses decrease and eigenvalue is expressed to calculate the best bus position for DER allocation. The proposed MMA–CPF technique has been assessed on a 34-bus RDN and the outcomes demonstrate the effectiveness of the proposed scheme.
- Open Access
- 31 October 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 592-597
Optimal capacitor placement in a dominant induction motor loads power system
- 31 October 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 592-597
Open AccessOptimal capacitor placement in a dominant induction motor loads power system
- 1 January 2022
- Published by Elsevier in Electric Power Systems Research
- Vol. 202
Dynamic under-voltage load shedding scheme considering composite load modeling
- 1 January 2022
- Published by Elsevier in Electric Power Systems Research
- Vol. 202
Dynamic under-voltage load shedding scheme considering composite load modeling
- 2 November 2021
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (11) , 47-52
Hybrid renewable energy generation planning for isolated microgrid in Indonesia with metaheuristic approach
Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informujące swoich czytelników o najnowszych osiągnięciach naukowych i nowoczesnych rozwiązaniach technicznych w Polsce i na świecie, popularyzuje problemy techniczne oraz poszerza wiedzę i kulturę techniczną.
- 2 November 2021
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (11) , 47-52
Hybrid renewable energy generation planning for isolated microgrid in Indonesia with metaheuristic approach
Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informujące swoich czytelników o najnowszych osiągnięciach naukowych i nowoczesnych rozwiązaniach technicznych w Polsce i na świecie, popularyzuje problemy techniczne oraz poszerza wiedzę i kulturę techniczną.