JRJun Ren

Jun Ren

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jun Ren has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Reconfigurable photoinduced terahertz wave modulation using hybrid metal–silicon metasurface

    by Ahasan Ullah, Yi-Chieh Wang, Sanjida Yeasmin, Yijing Deng, Jun Ren, Yu Shi, Lei Liu, Li-Jing Cheng

    We present a photoinduced reconfigurable metasurface to enable high spatial resolution terahertz (THz) wave modulation. Conventional photoinduced THz wave modulation uses optically induced conductive patterns on a semiconductor substrate to create programmable passive THz devices. The technique, albeit versatile and straightforward, suffers from limited performance resulting from the severe lateral diffusion of the photogenerated carriers that undermines the spatial resolution and conductivity contrast of the photoinduced conductive patterns. The proposed metasurface overcomes the limitation using a metal-jointed silicon mesa array with subwavelength-scaled dimensions on an insulator substrate. The structure physically restrains the lateral diffusion of the photogenerated carriers while ensuring the electrical conductivity between the silicon mesas , which is essential for THz wave modulation. The metasurface creates high-definition photoconductive patterns with dimensions smaller than the diffusion length of photogenerated carriers. The metasurface provides a modulation depth of −20 to −10 dB for the THz waves between 0.2 to 1.2 THz and supports a THz bandpass filter with a tunable central frequency. The new, to the best of our knowledge, design concept will benefit the implementation of reconfigurable THz devices.


  • Computational analysis of novel high performance optically controlled RF switches for reconfigurable millimeterwave-to-THz circuits

    by Yu Shi, Yijing Deng, Jun Ren, Peizhao Li, Patrick Fay, Lei Liu

    Optically controlled RF switches with a novel non-contact device architecture that achieves high performance in the millimeterwave-to-terahertz (mmW-THz) region are proposed and investigated through simulation. The significant change in conductivity in semiconductors caused by photogenerated carriers is used to develop RF switches having very high performance. By including a thin layer of insulator between the active semiconductor material and the metal contacts, the carrier concentration can be enhanced over that of conventional devices. For a prototype demonstration, G-band coplanar waveguide-based optical switches (using Si and Ge as active materials) with different contact geometries have been modeled and simulated. The proposed switches outperform both conventional solid-state switches and phase-change material-based switches in the switch figure-of-merit, and are promising for developing a novel class of tunable and reconfigurable mmW-THz circuits for advanced sensing, imaging, and communication.


  • Advanced photo-induced substrate-integrated waveguides using pillar-array structures for tunable and reconfigurable THz circuits

    by Yijing Deng, Jun Ren, Yu Shi, Yi-Chieh Wang, Li-Jing Cheng, Patrick Fay, Lei Liu

    Substrate-integrated waveguides (SIWs) have recently attracted increasing attention for the development of terahertz (THz) circuits and systems. However, conventional SIWs employ fixed metallic vias to form the waveguide sidewalls, resulting in limited tunability and reconfigurability. In this paper, we report a novel approach for the realization of high-performance tunable and/or reconfigurable THz SIW structures. In this approach, photo-induced free carriers are generated in a high-resistivity silicon pillar-array structure to form well-defined, highly conductive, vertical sidewalls. The wave propagation properties of these optically-defined photo-induced SIWs (PI-SIWs) have been evaluated using full-wave electromagnetic simulations. Higher-functionality THz components, including a single-pole double-throw switch and a phase shifter were also designed and simulated. Based on these example circuits, PI-SIWs using pillar-array structures appear to be attractive candidates for the development of tunable and reconfigurable THz components for THz sensing, imaging, and communication systems.


  • Open Access

    Optically controlled reconfigurable terahertz waveguide filters based on photo-induced electromagnetic band gap structures using mesa arrays

    by Jun Ren, Yijing Deng, Yu Shi, Akash Kannegulla, Yi-Chieh Wang, Patrick Fay, Li-Jing Cheng, Lei Liu

    In this work, we present a novel approach to the implementation of optically controlled reconfigurable terahertz (THz) waveguide filters based on photo-induced electromagnetic band gap (PI-EBG) structures using semiconductor mesa arrays. In this approach, EBG structures are dynamically generated through spatially-resolved photogeneration of free carriers in semiconductor mesa structures; the use of mesa arrays improves the spatial resolution, leading to more refined PI-EBG patterns and improved circuit operation at THz frequencies. A band-stop filter prototype in the WR-5.1 band (140-220 GHz) was designed, simulated, and analyzed in detail. Simulations show that the stop-band rejection and bandwidth of the proposed device can be adjusted by changing the filling factor of the photo-patterns illuminated onto the mesa array. The center frequency of the stop-band can also be tuned from 166 to 200 GHz by changing the period of the PI-EBG patterns. The proposed reconfigurable THz waveguide filters based on PI-EBG are promising for a wide range of applications in advanced THz sensing, imaging, and communications.


  • High-Performance WR-4.3 Optically Controlled Variable Attenuator With 60-dB Range

    by Jun Ren, Zhenguo Jiang, Patrick Fay, Jeffrey L. Hesler, Cheuk-Yu E. Tong, Lei Liu

    We report the design, fabrication, and characterization of a high-performance optically controlled WR-4.3 variable attenuator. The attenuation is based on the interaction between the incident waves and photogenerated free carriers inside an E-plane micromachined silicon absorber. Tuning is realized by illuminating the silicon with different light intensities using three 808-nm infrared laser diodes. Measurement results show that an average attenuation range of 60 dB, a 0.7-dB insertion loss, and a greater than 15-dB return loss have been achieved over the entire WR-4.3 band. In addition, a 3-dB modulation bandwidth of 350 kHz has been obtained experimentally. Initial thermal stability test of the device has also been performed, with less than 0.4-dB amplitude drift and 2° drift in phase over 30-min demonstration.