Daisuke Kono
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daisuke Kono has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Atsushi Matsubara
Department of Micro Engineering, Kyoto University, Kyoto, Japan
5 shared publications Iwao Yamaji
Department of Micro-Engineering, Graduate School of Engineering, Kyoto University, Kyotodaigaku Katsura, Nishikyo-ku, Kyoto 615-8540, Japan
3 shared publicationsAkihiro Maruhashi
Department of Micro-Engineering, Graduate School of Engineering, Kyoto University, Kyotodaigaku Katsura, Nishikyo-ku, Kyoto 615-8540, Japan
2 shared publicationsTakuma Umezu
Department of Micro Engineering, Graduate School of Engineering, Kyoto University, C1S08, C3,Kyotodaigaku Katsura, Nisikyo-ku, Kyoto, 615-8540, Japan
2 shared publicationsYohei Oda
DMG MORI Co., Ltd., 2-35-16 Meieki, Nakamura-ku, Nagoya, Aichi 450-0002, Japan
2 shared publicationsA. Matsubara
Kyoto University
1 shared publication
Latest Publications
- Open Access
- 7 May 2026
- Published by Elsevier in Precision Engineering
- Vol. 102, 66-74
High efficiency machining of array-controlled surface texture utilizing ultrasonic vibration cutting
- 7 May 2026
- Published by Elsevier in Precision Engineering
- Vol. 102, 66-74
Open AccessHigh efficiency machining of array-controlled surface texture utilizing ultrasonic vibration cutting
- 26 November 2025
- Published by Elsevier in CIRP Journal of Manufacturing Science and Technology
- Vol. 64, 1-14
3D geometry prediction for wall deposition using transfer learning in wire arc additive manufacturing
- 26 November 2025
- Published by Elsevier in CIRP Journal of Manufacturing Science and Technology
- Vol. 64, 1-14
3D geometry prediction for wall deposition using transfer learning in wire arc additive manufacturing
- Open Access
- 5 September 2025
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 19 (5) , 837-850
Algorithm and Marker Development for 6D Motion Measurement Using a Single Camera
This study developed a novel composite marker system and an associated six-dimensional (6D) motion measurement algorithm for complex motions using a single camera. The composite marker, consisting of three spherical markers arranged in an equilateral triangle, provided a stable reference to achieve sub-pixel accuracy in motion measurement. The proposed three-dimensional (3D) measurement algorithm enabled the determination of the 3D coordinates of the composite marker from a single image, thereby reducing the complexity and cost compared to traditional multi-camera systems. This study also introduced an automated intensity distribution fitting method to precisely determine the visual center of each marker, enabling accurate evaluation of the deviation between the optical and physical centers for each individual marker within the composite marker. These measurements support accurate camera extrinsic calibration based on the markers. The proposed method achieved a static resolution between 0.05 and 0.2 mm, depending on the direction of movement, with further improvements possible through low-pass filtering. Motion measurement involved both circular trajectory tracking and complex 6D motion measurement of the composite marker. The circular trajectory motion included depth changes relative to the camera, with deviation in the circular trajectory of less than 0.23 mm. For complex 6D motion, the positional accuracy deviation was less than 1.5 mm, and the estimated normal vector compared to the actual normal vector had an offset of 4°. Experimental results confirmed the effectiveness of the method for capturing 6D motion, showing reliable performance in tracking both depth and tangential movements.
- 5 September 2025
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 19 (5) , 837-850
Open AccessAlgorithm and Marker Development for 6D Motion Measurement Using a Single Camera
This study developed a novel composite marker system and an associated six-dimensional (6D) motion measurement algorithm for complex motions using a single camera. The composite marker, consisting of three spherical markers arranged in an equilateral triangle, provided a stable reference to achieve sub-pixel accuracy in motion measurement. The proposed three-dimensional (3D) measurement algorithm enabled the determination of the 3D coordinates of the composite marker from a single image, thereby reducing the complexity and cost compared to traditional multi-camera systems. This study also introduced an automated intensity distribution fitting method to precisely determine the visual center of each marker, enabling accurate evaluation of the deviation between the optical and physical centers for each individual marker within the composite marker. These measurements support accurate camera extrinsic calibration based on the markers. The proposed method achieved a static resolution between 0.05 and 0.2 mm, depending on the direction of movement, with further improvements possible through low-pass filtering. Motion measurement involved both circular trajectory tracking and complex 6D motion measurement of the composite marker. The circular trajectory motion included depth changes relative to the camera, with deviation in the circular trajectory of less than 0.23 mm. For complex 6D motion, the positional accuracy deviation was less than 1.5 mm, and the estimated normal vector compared to the actual normal vector had an offset of 4°. Experimental results confirmed the effectiveness of the method for capturing 6D motion, showing reliable performance in tracking both depth and tangential movements.
- Top Cited Papers
- 31 May 2025
- Published by Elsevier in International Journal of Machine Tools and Manufacture
- Vol. 209
A review of robust thermal error reduction of machine tools
- 31 May 2025
- Published by Elsevier in International Journal of Machine Tools and Manufacture
- Vol. 209
Top Cited PapersA review of robust thermal error reduction of machine tools
- 28 April 2025
- Published by Elsevier in CIRP Annals
- Vol. 74 (1) , 493-497
Thermal displacement reduction based on heat transfer characteristics under environmental temperature changes
- 28 April 2025
- Published by Elsevier in CIRP Annals
- Vol. 74 (1) , 493-497
Thermal displacement reduction based on heat transfer characteristics under environmental temperature changes
- 13 May 2024
- Published by Elsevier in CIRP Annals
- Vol. 73 (1) , 309-312
Accuracy evaluation of squareness identification by vision-based circular tests for machine tools
- 13 May 2024
- Published by Elsevier in CIRP Annals
- Vol. 73 (1) , 309-312
Accuracy evaluation of squareness identification by vision-based circular tests for machine tools
- Open Access
- 1 January 2024
- Published by Japan Society of Mechanical Engineers in Journal of Advanced Mechanical Design, Systems, and Manufacturing
- Vol. 18 (6) , JAMDSM0080
Vision based two-dimensional measurement of machine tool motion trajectory
The aim of this study is to develop a vision-based 3D-dynamic motion errors measurement method. In this report, a measurement method is proposed, and its resolution and measurement error in plane motion measurement are discussed. Moreover, the influence of the defocus condition on the detection resolution is analyzed. The displacement of the marker installed on the spindle of the machine tool is obtained through the video captured by the high-speed camera. In order to obtain the displacement of the marker, the center position of the marker is identified by fitting a mathematical function to obtain the position of the intensity peak of the marker. The measurement resolution and accuracy of the proposed method are investigated experimentally. In addition to the model fitting method, the edge detection and threshold detection methods with different functions for model fitting method are also used for marker position detection for comparison. The deviation of model fitting in the results is less than 42 μm compared with the grid encoder as the reference. The standard deviation of the measured static position is less than 0.1 pixel with a defocus length less than 80 mm.
- 1 January 2024
- Published by Japan Society of Mechanical Engineers in Journal of Advanced Mechanical Design, Systems, and Manufacturing
- Vol. 18 (6) , JAMDSM0080
Open AccessVision based two-dimensional measurement of machine tool motion trajectory
The aim of this study is to develop a vision-based 3D-dynamic motion errors measurement method. In this report, a measurement method is proposed, and its resolution and measurement error in plane motion measurement are discussed. Moreover, the influence of the defocus condition on the detection resolution is analyzed. The displacement of the marker installed on the spindle of the machine tool is obtained through the video captured by the high-speed camera. In order to obtain the displacement of the marker, the center position of the marker is identified by fitting a mathematical function to obtain the position of the intensity peak of the marker. The measurement resolution and accuracy of the proposed method are investigated experimentally. In addition to the model fitting method, the edge detection and threshold detection methods with different functions for model fitting method are also used for marker position detection for comparison. The deviation of model fitting in the results is less than 42 μm compared with the grid encoder as the reference. The standard deviation of the measured static position is less than 0.1 pixel with a defocus length less than 80 mm.
- 23 April 2022
- Published by Elsevier in CIRP Annals
- Vol. 71 (1) , 485-488
Analysis of tangential contact damping mechanism by direct observation using X-ray computed tomography
- 23 April 2022
- Published by Elsevier in CIRP Annals
- Vol. 71 (1) , 485-488
Analysis of tangential contact damping mechanism by direct observation using X-ray computed tomography
- 27 March 2022
- Published by Springer Nature
- p. 389-397
Investigation on Position Dependency of Tool-Workpiece Compliance
- 27 March 2022
- Published by Springer Nature
- p. 389-397
Investigation on Position Dependency of Tool-Workpiece Compliance
- Open Access
- 1 March 2022
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 16 (2) , 125
Special Issue on Self-Optimizing Machining Systems
Title: Special Issue on Self-Optimizing Machining Systems | Author: Yasuhiro Kakinuma and Daisuke Kono
- 1 March 2022
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 16 (2) , 125
Open AccessSpecial Issue on Self-Optimizing Machining Systems
Title: Special Issue on Self-Optimizing Machining Systems | Author: Yasuhiro Kakinuma and Daisuke Kono