Slamet Widodo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Slamet Widodo has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Diding Suhandy
Department of Agricultural Engineering, Faculty of Agriculture, The University of Lampung, Jl. Soemantri Brojonegoro No.1, Bandar Lampung 35145, Indonesia
3 shared publications - Hirotaka Naito
Graduate School of Bioresources, Department of Environmental Science and Technology, Mie University, Tsu, Japan
3 shared publications - Meinilwita Yulia
Department of Agricultural Technology, Lampung State Polytechnic, Jl. Soekarno Hatta No. 10, Rajabasa, Bandar Lampung 35141, Indonesia
3 shared publications Diang Sagita
Agricultural Engineering Science, Graduate School, IPB University, Bogor 16680, Indonesia; Research Center for Equipment Manufacturing Technology, National Research and Innovation Agency, South Tangerang 15314, Indonesia
2 shared publications- Dimas Firmanda Al Riza
Department of Agricultural Engineering, Faculty of Agricultural Technology, University of Brawijaya, Malang, Indonesia
2 shared publications Mohamad Solahudin
Departemen Teknik Mesin dan Biosistem, Fakultas Teknologi Pertanian, IPB
2 shared publications
Latest Publications
- 5 January 2026
- Published by Springer Nature in Journal of Biosystems Engineering
- Vol. 51 (1) , 2
Kinetic Modelling of Agtron-Based Roast Degrees and Their Association with Physical and Spectral Changes in Arabica and Robusta Coffee
- 5 January 2026
- Published by Springer Nature in Journal of Biosystems Engineering
- Vol. 51 (1) , 2
Kinetic Modelling of Agtron-Based Roast Degrees and Their Association with Physical and Spectral Changes in Arabica and Robusta Coffee
- Open Access
- 1 January 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1580 (1)
A gazebo-simulated approach for strawberry ripeness detection toward sustainable agriculture
Recent advancements in simulation technologies are supporting the efficient development of more sustainable agricultural practices by reducing resource-intensive physical testing and promoting environmentally conscious research practices. In this study, a simulation-based approach was used to develop and assess a perception pipeline for strawberries using a virtual plant environment, designed with 3D design software and implemented in the Gazebo simulator. Synthetic images depicting strawberries at different maturity stages were generated from the simulation. YOLO11n, YOLO11s, YOLO11m, and YOLO11l object detection models were used on this synthetic dataset to detect individual strawberries and classify their ripeness level. The models accurately identified and classified strawberries by ripeness, with the best performers of YOLO11m and YOLO11l achieving peak mAP scores of 0.933 and 0.932, respectively. Notably, this improved accuracy was associated with increased model size and reduced frame rates. These perception results are a foundation for developing motion planning algorithm of robotic arm in harvesting robot in the simulation.
- 1 January 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1580 (1)
Open AccessA gazebo-simulated approach for strawberry ripeness detection toward sustainable agriculture
Recent advancements in simulation technologies are supporting the efficient development of more sustainable agricultural practices by reducing resource-intensive physical testing and promoting environmentally conscious research practices. In this study, a simulation-based approach was used to develop and assess a perception pipeline for strawberries using a virtual plant environment, designed with 3D design software and implemented in the Gazebo simulator. Synthetic images depicting strawberries at different maturity stages were generated from the simulation. YOLO11n, YOLO11s, YOLO11m, and YOLO11l object detection models were used on this synthetic dataset to detect individual strawberries and classify their ripeness level. The models accurately identified and classified strawberries by ripeness, with the best performers of YOLO11m and YOLO11l achieving peak mAP scores of 0.933 and 0.932, respectively. Notably, this improved accuracy was associated with increased model size and reduced frame rates. These perception results are a foundation for developing motion planning algorithm of robotic arm in harvesting robot in the simulation.
- 27 December 2025
- Published by Elsevier in Food Chemistry
- Vol. 503, 147773
Multi-channel spectral sensor–based instrument as an alternative to the Agtron for predicting coffee roast degree using classical chemometric and machine learning approaches
- 27 December 2025
- Published by Elsevier in Food Chemistry
- Vol. 503, 147773
Multi-channel spectral sensor–based instrument as an alternative to the Agtron for predicting coffee roast degree using classical chemometric and machine learning approaches
- Open Access
- 2 June 2025
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 13 (2) , 302-317
Classification of Arabica Coffee Beans Based on Starters Type with Honey Processing Using Multi-channel Spectral Sensor
Coffee is one of important agricultural commodities in Indonesia, contributing as an income source for farmers and a major export revenue. The specialty coffee industry has begun to utilize microorganisms (starter) in the fermentation process, including the honey process, to obtain a distinctive flavour. However, the use of various starters in this process produces coffee bean with similar color, making it difficult to determine the authenticity of the type of starter used. This research aims to classify arabica coffee beans processed with different types of starters using multi-channel spectral sensor to ensure product quality and authenticity. This research used arabica coffee beans, in the form of green beans, processed with three types of starters, namely Saccharomyces cerevisiae, Lactobacillus sp, and Rhizopus oryzae. Multi-channel spectral sensor was used to acquire the spectra data of coffee sample processed with different starters. The data was then analysed using multivariate analysis based on Partial Least Square – Discriminant Analysis (PLS-DA). In the calibration stage, PLS-DA model built using de-trending pre-treatment was able to predict the type of starter very well, with accuracy, sensitivity, specificity, and precision values, reaching 97%, 95%, 96%, 95%, respectively. This result is also confirmed during validation stage where the built PLS-DA model could predict the type of starter with accuracy, sensitivity, specificity, and precision values, reaching 100%.
- 2 June 2025
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 13 (2) , 302-317
Open AccessClassification of Arabica Coffee Beans Based on Starters Type with Honey Processing Using Multi-channel Spectral Sensor
Coffee is one of important agricultural commodities in Indonesia, contributing as an income source for farmers and a major export revenue. The specialty coffee industry has begun to utilize microorganisms (starter) in the fermentation process, including the honey process, to obtain a distinctive flavour. However, the use of various starters in this process produces coffee bean with similar color, making it difficult to determine the authenticity of the type of starter used. This research aims to classify arabica coffee beans processed with different types of starters using multi-channel spectral sensor to ensure product quality and authenticity. This research used arabica coffee beans, in the form of green beans, processed with three types of starters, namely Saccharomyces cerevisiae, Lactobacillus sp, and Rhizopus oryzae. Multi-channel spectral sensor was used to acquire the spectra data of coffee sample processed with different starters. The data was then analysed using multivariate analysis based on Partial Least Square – Discriminant Analysis (PLS-DA). In the calibration stage, PLS-DA model built using de-trending pre-treatment was able to predict the type of starter very well, with accuracy, sensitivity, specificity, and precision values, reaching 97%, 95%, 96%, 95%, respectively. This result is also confirmed during validation stage where the built PLS-DA model could predict the type of starter with accuracy, sensitivity, specificity, and precision values, reaching 100%.
- 18 April 2025
- Published by Elsevier in Food Research International
- Vol. 211, 116501
Rapid identification of coffee species and origin using affordable multi-channel spectral sensor combined with machine learning
- 18 April 2025
- Published by Elsevier in Food Research International
- Vol. 211, 116501
Rapid identification of coffee species and origin using affordable multi-channel spectral sensor combined with machine learning
- Open Access
- 18 April 2025
- Published by Springer Nature in Discover Applied Sciences
- Vol. 7 (5) , 1-13
Identification of Lampung fine Robusta peaberry green coffee beans with different fermentation methods using portable front-face fluorescence spectroscopy
- 18 April 2025
- Published by Springer Nature in Discover Applied Sciences
- Vol. 7 (5) , 1-13
Open AccessIdentification of Lampung fine Robusta peaberry green coffee beans with different fermentation methods using portable front-face fluorescence spectroscopy
- Open Access
- 28 October 2024
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 12 (3) , 409-423
Rapid Analysis of ICUMSA Value of Cane Sugar Using Multi-Channel Spectra Sensor Based-Portable Device
One of important quality parameters of white crystal cane sugar is its color measured as ICUMSA (International Commission for Uniform Methods of Sugar Analysis) color value. It is usually measured in laboratory through a complex and lengthy chemical analysis method. To overcome this challenge, this research tries to explore the potential use of multi-channel spectra sensors in UV-VIS-NIR regions as an alternative method to predict the ICUMSA value. The proposed portable device uses a AS7265X sensor as its main component. After that, measurements were made in the laboratory using standard methods as reference data. The result of the prediction with partial least squares (PLS) is R2 = 0,896, RMSEC = 0,072%, RMSEP = 0,103%, CV=26,09% and PRD = 3,10. Multiple linear regression (MLR) predictions are R2= 0,935, RMSEC=0,057%, RMSEP=0,090%, CV=20,64% and RPD = 3,92. The prediction of ICUMSA with an artificial neural network model (ANN) is R2=0,9996, RMSEC=0,004%, RMSEP=0,037%, CV=1,43% and the RPD value is 9,54. This shows that developed PLS, MLR and ANN are able to predict the ICUMA value, with ANN as the best model.
- 28 October 2024
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 12 (3) , 409-423
Open AccessRapid Analysis of ICUMSA Value of Cane Sugar Using Multi-Channel Spectra Sensor Based-Portable Device
One of important quality parameters of white crystal cane sugar is its color measured as ICUMSA (International Commission for Uniform Methods of Sugar Analysis) color value. It is usually measured in laboratory through a complex and lengthy chemical analysis method. To overcome this challenge, this research tries to explore the potential use of multi-channel spectra sensors in UV-VIS-NIR regions as an alternative method to predict the ICUMSA value. The proposed portable device uses a AS7265X sensor as its main component. After that, measurements were made in the laboratory using standard methods as reference data. The result of the prediction with partial least squares (PLS) is R2 = 0,896, RMSEC = 0,072%, RMSEP = 0,103%, CV=26,09% and PRD = 3,10. Multiple linear regression (MLR) predictions are R2= 0,935, RMSEC=0,057%, RMSEP=0,090%, CV=20,64% and RPD = 3,92. The prediction of ICUMSA with an artificial neural network model (ANN) is R2=0,9996, RMSEC=0,004%, RMSEP=0,037%, CV=1,43% and the RPD value is 9,54. This shows that developed PLS, MLR and ANN are able to predict the ICUMA value, with ANN as the best model.
- Open Access
- 3 July 2024
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Lampung in Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering)
- Vol. 13 (3) , 851-862
Performance Comparison of Two Portable Near-infrared Devices for Rapid Authentication of Aceh Aromatic Rice ‘Sigupai’
Sigupai rice, Indonesia local aromatic rice varieties grown in South-West region of Aceh, is highly valued for its fragrance and quality, making it susceptible to adulteration. This study compares the performance of two portable Near-infrared (NIR) devices, SCiO and NeoSpectra, for rapid authentication of Sigupai rice. We evaluated 86 samples for qualitative analysis (i.e. authentic vs adulterated rice) and 44 samples for quantitative analysis (i.e. the level of adulteration). For the qualitative analysis using partial least squares-discriminant analysis (PLS-DA), the best estimation model could differentiate authentic and adulterated samples with an accuracy, sensitivity, specificity, and false positive rates of 89.29%, 92.86%, 85.71% and 14.29% for the NeoSpectra and 97.44%, 100%, 94.87%, and 5.13% for the SCiO, respectively at the validation stage. For quantitative analysis using partial least squares-regression (PLS-R), the best estimation model could estimate the level of adulteration with a coefficient of determination (R²), RMSEP, RPD, and consistency values of 0.92, 1.50%, 5.93 and 100.69% for the NeoSpectra and 0.96, 1.31%, 6.83 and 104.78% for the SCiO. Both portable NIR devices could be used as a rapid analysis tool for the authenticity of Sigupai rice with high accuracy. However, in this study the SCiO device showed a better performance. Keywords: Portable NIR device, Authentication, Aromatic rice, Rapid analysis, Sigupai variety.
- 3 July 2024
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Lampung in Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering)
- Vol. 13 (3) , 851-862
Open AccessPerformance Comparison of Two Portable Near-infrared Devices for Rapid Authentication of Aceh Aromatic Rice ‘Sigupai’
Sigupai rice, Indonesia local aromatic rice varieties grown in South-West region of Aceh, is highly valued for its fragrance and quality, making it susceptible to adulteration. This study compares the performance of two portable Near-infrared (NIR) devices, SCiO and NeoSpectra, for rapid authentication of Sigupai rice. We evaluated 86 samples for qualitative analysis (i.e. authentic vs adulterated rice) and 44 samples for quantitative analysis (i.e. the level of adulteration). For the qualitative analysis using partial least squares-discriminant analysis (PLS-DA), the best estimation model could differentiate authentic and adulterated samples with an accuracy, sensitivity, specificity, and false positive rates of 89.29%, 92.86%, 85.71% and 14.29% for the NeoSpectra and 97.44%, 100%, 94.87%, and 5.13% for the SCiO, respectively at the validation stage. For quantitative analysis using partial least squares-regression (PLS-R), the best estimation model could estimate the level of adulteration with a coefficient of determination (R²), RMSEP, RPD, and consistency values of 0.92, 1.50%, 5.93 and 100.69% for the NeoSpectra and 0.96, 1.31%, 6.83 and 104.78% for the SCiO. Both portable NIR devices could be used as a rapid analysis tool for the authenticity of Sigupai rice with high accuracy. However, in this study the SCiO device showed a better performance. Keywords: Portable NIR device, Authentication, Aromatic rice, Rapid analysis, Sigupai variety.
- Open Access
The Authentication of Gayo Arabica Green Coffee Beans with Different Cherry Processing Methods Using Portable LED-Based Fluorescence Spectroscopy and Chemometrics Analysis
Aceh is an important region for the production of high-quality Gayo arabica coffee in Indonesia. In this area, several coffee cherry processing methods are well implemented including the honey process (HP), wine process (WP), and natural process (NP). The most significant difference between the three coffee cherry processing methods is the fermentation process: HP is a process of pulped coffee bean fermentation, WP is coffee cherry fermentation, and NP is no fermentation. It is well known that the WP green coffee beans are better in quality and are sold at higher prices compared with the HP and NP green coffee beans. In this present study, we evaluated the utilization of fluorescence information to discriminate Gayo arabica green coffee beans from different cherry processing methods using portable fluorescence spectroscopy and chemometrics analysis. A total of 300 samples were used (n = 100 for HP, WP, and NP, respectively). Each sample consisted of three selected non-defective green coffee beans. Fluorescence spectral data from 348.5 nm to 866.5 nm were obtained by exciting the intact green coffee beans using a portable spectrometer equipped with four 365 nm LED lamps. The result showed that the fermented green coffee beans (HP and WP) were closely mapped and mostly clustered on the left side of PC1, with negative scores. The non-fermented (NP) green coffee beans were clustered mostly on the right of PC1 with positive scores. The results of the classification using partial least squares–discriminant analysis (PLS-DA), linear discriminant analysis (LDA), and principal component analysis–linear discriminant analysis (PCA-LDA) are acceptable, with an accuracy of more than 80% reported. The highest accuracy of prediction of 96.67% was obtained by using the PCA-LDA model. Our recent results show the potential application of portable fluorescence spectroscopy using LED lamps to classify and authenticate the Gayo arabica green coffee beans according to their different cherry processing methods. This innovative method is more affordable and could be easy to implement (in terms of both affordability and practicability) in the coffee industry in Indonesia.
Open AccessThe Authentication of Gayo Arabica Green Coffee Beans with Different Cherry Processing Methods Using Portable LED-Based Fluorescence Spectroscopy and Chemometrics Analysis
Aceh is an important region for the production of high-quality Gayo arabica coffee in Indonesia. In this area, several coffee cherry processing methods are well implemented including the honey process (HP), wine process (WP), and natural process (NP). The most significant difference between the three coffee cherry processing methods is the fermentation process: HP is a process of pulped coffee bean fermentation, WP is coffee cherry fermentation, and NP is no fermentation. It is well known that the WP green coffee beans are better in quality and are sold at higher prices compared with the HP and NP green coffee beans. In this present study, we evaluated the utilization of fluorescence information to discriminate Gayo arabica green coffee beans from different cherry processing methods using portable fluorescence spectroscopy and chemometrics analysis. A total of 300 samples were used (n = 100 for HP, WP, and NP, respectively). Each sample consisted of three selected non-defective green coffee beans. Fluorescence spectral data from 348.5 nm to 866.5 nm were obtained by exciting the intact green coffee beans using a portable spectrometer equipped with four 365 nm LED lamps. The result showed that the fermented green coffee beans (HP and WP) were closely mapped and mostly clustered on the left side of PC1, with negative scores. The non-fermented (NP) green coffee beans were clustered mostly on the right of PC1 with positive scores. The results of the classification using partial least squares–discriminant analysis (PLS-DA), linear discriminant analysis (LDA), and principal component analysis–linear discriminant analysis (PCA-LDA) are acceptable, with an accuracy of more than 80% reported. The highest accuracy of prediction of 96.67% was obtained by using the PCA-LDA model. Our recent results show the potential application of portable fluorescence spectroscopy using LED lamps to classify and authenticate the Gayo arabica green coffee beans according to their different cherry processing methods. This innovative method is more affordable and could be easy to implement (in terms of both affordability and practicability) in the coffee industry in Indonesia.