Takaya Miyazawa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Takaya Miyazawa has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
Hiroaki Harai
National Institute of Information and Communications Technology (NICT)
13 shared publicationsNaoya Wada
Photonic Network System Lab., National Institute of Information and Communications Technology (NICT), 4-2-1, Nukui-kitamachi, Koganei, Tokyo 184-8795, Japan
9 shared publicationsHideaki Furukawa
National Institute ofinformation and Communications Technology (NICT), 4-2-1 Nukui-Kitamachi, Koganei-shi, Tokyo, 184-8795 Japan
7 shared publications- Hideaki Furukawa
National Institute of Information and Communications Technology, Tokyo, Japan
5 shared publications Kenji Fujikawa
National Institute of Information and Communications Technology, Koganei, Tokyo, Japan
5 shared publications- Hiroaki Harai
National Institute of Information and Communications Technology
3 shared publications
Latest Publications
- 1 May 2021
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Information and Systems
- Vol. E104.D (5) , 606-616
Sparse Regression Model-Based Relearning Architecture for Shortening Learning Time in Traffic Prediction
Network function virtualization (NFV) enables network operators to flexibly provide diverse virtualized functions for services such as Internet of things (IoT) and mobile applications. To meet multiple quality of service (QoS) requirements against time-varying network environments, infrastructure providers must dynamically adjust the amount of computational resources, such as CPU, assigned to virtual network functions (VNFs). To provide agile resource control and adaptiveness, predicting the virtual server load via machine learning technologies is an effective approach to the proactive control of network systems. In this paper, we propose an adjustment mechanism for regressors based on forgetting and dynamic ensemble executed in a shorter time than that of our previous work. The framework includes a reducing training data method based on sparse model regression. By making a short list of training data derived from the sparse regression model, the relearning time can be reduced to about 57% without degrading provisioning accuracy.
- 1 May 2021
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Information and Systems
- Vol. E104.D (5) , 606-616
Sparse Regression Model-Based Relearning Architecture for Shortening Learning Time in Traffic Prediction
Network function virtualization (NFV) enables network operators to flexibly provide diverse virtualized functions for services such as Internet of things (IoT) and mobile applications. To meet multiple quality of service (QoS) requirements against time-varying network environments, infrastructure providers must dynamically adjust the amount of computational resources, such as CPU, assigned to virtual network functions (VNFs). To provide agile resource control and adaptiveness, predicting the virtual server load via machine learning technologies is an effective approach to the proactive control of network systems. In this paper, we propose an adjustment mechanism for regressors based on forgetting and dynamic ensemble executed in a shorter time than that of our previous work. The framework includes a reducing training data method based on sparse model regression. By making a short list of training data derived from the sparse regression model, the relearning time can be reduced to about 57% without degrading provisioning accuracy.
- 23 May 2018
- Published by Springer Nature in Photonic Network Communications
- Vol. 36 (1) , 43-55
Designing and experimentally demonstrating automatic OPS/OCS/OpenFlow network control driven by ChoiceNet provider
- 23 May 2018
- Published by Springer Nature in Photonic Network Communications
- Vol. 36 (1) , 43-55
Designing and experimentally demonstrating automatic OPS/OCS/OpenFlow network control driven by ChoiceNet provider
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 253-258
Reconstruction of control plane of distributed SDN against large-scale disruption and restoration
Software Defined Networking (SDN) technology enables us to configure switches in a network flexibly. Previously, distributed SDN control methods have been discussed to improve their scalability and robustness. Distributed placement of controllers reduces computation load of each controller and backing up each other enhances robustness. However, these techniques do not include an emergency measure against large-scale failures such as network separation induced by disasters. In this paper, we design emergency reconfiguration of distributed SDN especially in control plane (C-plane). In our reactive approach, each node detects disconnection to the main controller. Then, a controller deployed on one of the disconnected nodes becomes the substitute controller to which the others reconnect. Meanwhile, C-plane should be reconstructed when network connectivity recovers in case many controllers exist. The main and substitute controllers detect networks are reconnected, and merge their C-planes to avoid conflict. Simulation results reveal that our proposed method recovers C-plane logical connectivity with probability of about 90% when regional failure occurs in 100 node networks. Furthermore, we show that convergence time of our reconstruction mechanism is proportional to network size.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 253-258
Reconstruction of control plane of distributed SDN against large-scale disruption and restoration
Software Defined Networking (SDN) technology enables us to configure switches in a network flexibly. Previously, distributed SDN control methods have been discussed to improve their scalability and robustness. Distributed placement of controllers reduces computation load of each controller and backing up each other enhances robustness. However, these techniques do not include an emergency measure against large-scale failures such as network separation induced by disasters. In this paper, we design emergency reconfiguration of distributed SDN especially in control plane (C-plane). In our reactive approach, each node detects disconnection to the main controller. Then, a controller deployed on one of the disconnected nodes becomes the substitute controller to which the others reconnect. Meanwhile, C-plane should be reconstructed when network connectivity recovers in case many controllers exist. The main and substitute controllers detect networks are reconnected, and merge their C-planes to avoid conflict. Simulation results reveal that our proposed method recovers C-plane logical connectivity with probability of about 90% when regional failure occurs in 100 node networks. Furthermore, we show that convergence time of our reconstruction mechanism is proportional to network size.
- 1 November 2015
- Published by Elsevier in Optical Switching and Networking
- Vol. 18, 201-210
Queueing analysis of optical and electronic combined buffer for optical packet switches
- 1 November 2015
- Published by Elsevier in Optical Switching and Networking
- Vol. 18, 201-210
Queueing analysis of optical and electronic combined buffer for optical packet switches
- 1 July 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Wavelength path signalling for WSS/WBSS combined optical switches in hierarchical optical networks
Hierarchical optical networks will be a viable solution in creating large-scale networks of the future. The networks control optical network resources in granularity of both wavelength and waveband that consists of a fixed number of wavelengths; thereby, they can reduce signalling processing load and efficiently create virtual private networks. Meanwhile, as the network scale increases, multi-stage optical switch architecture is effective in reducing hardware scale and cost. In this paper, we develop a distributed wavelength path control plane for large-degree, hierarchical optical networks that consist of nodes made by multi-stage wavelength selective switches (WSSs) and waveband selective switches (WBSSs). Along with the wavelength path signalling, optical switch control functions configure WBSSs as well as WSSs. Accordingly, we need to develop an optical switch control mechanism so that end-to-end wavelength path signalling can correctly configure both WSSs and WBSSs. As experimental results, we show that wavelength paths are successfully established and released.
- 1 July 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Wavelength path signalling for WSS/WBSS combined optical switches in hierarchical optical networks
Hierarchical optical networks will be a viable solution in creating large-scale networks of the future. The networks control optical network resources in granularity of both wavelength and waveband that consists of a fixed number of wavelengths; thereby, they can reduce signalling processing load and efficiently create virtual private networks. Meanwhile, as the network scale increases, multi-stage optical switch architecture is effective in reducing hardware scale and cost. In this paper, we develop a distributed wavelength path control plane for large-degree, hierarchical optical networks that consist of nodes made by multi-stage wavelength selective switches (WSSs) and waveband selective switches (WBSSs). Along with the wavelength path signalling, optical switch control functions configure WBSSs as well as WSSs. Accordingly, we need to develop an optical switch control mechanism so that end-to-end wavelength path signalling can correctly configure both WSSs and WBSSs. As experimental results, we show that wavelength paths are successfully established and released.
- 31 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 33 (8) , 1500-1507
Dynamic Openflow-Controlled Optical Packet Switching Network
This paper presents and experimentally demonstrates the generalized architecture of Openflow-controlled optical packet switching (OPS) network. Openflow control is enabled by introducing the Openflow/OPS agent into the OPS network, which realizes the Openflow protocol translation and message exchange between the Openflow control plane and the underlying OPS nodes. With software-defined networking (SDN) and Openflow technique, the complex control functions of the conventional OPS network can be offloaded into a centralized and flexible control plane, while promoted control and operations can be provided due to centralized coordination of network resources. Furthermore, a contention-aware routing/rerouting strategy as well as a fast network adjustment mechanism is proposed and demonstrated for the first time as advanced Openflow control to route traffic and handle the network dynamics. With centralized SDN/Openflow control, the OPS network has the potential to have better resource utilization and enhanced network resilience at lower cost and less node complexity. Our work will accelerate the development of both OPS and SDN evolution.
- 31 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 33 (8) , 1500-1507
Dynamic Openflow-Controlled Optical Packet Switching Network
This paper presents and experimentally demonstrates the generalized architecture of Openflow-controlled optical packet switching (OPS) network. Openflow control is enabled by introducing the Openflow/OPS agent into the OPS network, which realizes the Openflow protocol translation and message exchange between the Openflow control plane and the underlying OPS nodes. With software-defined networking (SDN) and Openflow technique, the complex control functions of the conventional OPS network can be offloaded into a centralized and flexible control plane, while promoted control and operations can be provided due to centralized coordination of network resources. Furthermore, a contention-aware routing/rerouting strategy as well as a fast network adjustment mechanism is proposed and demonstrated for the first time as advanced Openflow control to route traffic and handle the network dynamics. With centralized SDN/Openflow control, the OPS network has the potential to have better resource utilization and enhanced network resilience at lower cost and less node complexity. Our work will accelerate the development of both OPS and SDN evolution.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Optical packet and circuit integrated ring network with wavelength resources boundary control
We present an optical packet and circuit integrated (OPCI) ring network which can move a boundary between wavelength resources of optical packets and paths for flexible resource usage. We experimentally demonstrate automatic boundary control between optical packet switch (OPS) and optical circuit switch (OCS) resources using a hybrid optical packet/circuit switch and transponder.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Optical packet and circuit integrated ring network with wavelength resources boundary control
We present an optical packet and circuit integrated (OPCI) ring network which can move a boundary between wavelength resources of optical packets and paths for flexible resource usage. We experimentally demonstrate automatic boundary control between optical packet switch (OPS) and optical circuit switch (OCS) resources using a hybrid optical packet/circuit switch and transponder.
- 15 April 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 32 (16) , 2751-2759
Optical Packet and Circuit Integrated Networks and Software Defined Networking Extension
An optical packet and circuit integrated network (OPCInet) provides both high-speed, inexpensive services and deterministic-delay, low-data-loss services according to the users' usage scenarios, from the viewpoint of end users. From the viewpoint of network service providers, this network provides large switching capacity with low energy consumption, high flexibility, and efficient resource utilization with a simple control mechanism. This paper presents the recent progress made in the development of OPCInet and its extension to software-defined networking (SDN). We have developed OPCI nodes, which are capable of layer 3 switching from/to an Ethernet frame to/from an optical packet in the optical packet edge part and a burst-tolerant optical amplifier and an optical buffer with optical fiber delays in 100 Gbps optical packet switching part. The OPCI node achieves a packet error rate less than 10-4 and is used as a node in a lab-network that has access to the Internet. A distributed automatic control works in a control plane for the circuit switching part and in a moving boundary control between optical packet resources and circuit resources. Our optical system for packet and circuit switching works with a centralized control mechanism as well as a distributed control mechanism. We have shown a packet-based SDN system that configures mapping between IP addresses and OPCI node identifiers and switching tables according to the requests from multiple service providers via a web interface.
- 15 April 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 32 (16) , 2751-2759
Optical Packet and Circuit Integrated Networks and Software Defined Networking Extension
An optical packet and circuit integrated network (OPCInet) provides both high-speed, inexpensive services and deterministic-delay, low-data-loss services according to the users' usage scenarios, from the viewpoint of end users. From the viewpoint of network service providers, this network provides large switching capacity with low energy consumption, high flexibility, and efficient resource utilization with a simple control mechanism. This paper presents the recent progress made in the development of OPCInet and its extension to software-defined networking (SDN). We have developed OPCI nodes, which are capable of layer 3 switching from/to an Ethernet frame to/from an optical packet in the optical packet edge part and a burst-tolerant optical amplifier and an optical buffer with optical fiber delays in 100 Gbps optical packet switching part. The OPCI node achieves a packet error rate less than 10-4 and is used as a node in a lab-network that has access to the Internet. A distributed automatic control works in a control plane for the circuit switching part and in a moving boundary control between optical packet resources and circuit resources. Our optical system for packet and circuit switching works with a centralized control mechanism as well as a distributed control mechanism. We have shown a packet-based SDN system that configures mapping between IP addresses and OPCI node identifiers and switching tables according to the requests from multiple service providers via a web interface.
- 1 January 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E97.B (7) , 1325-1333
Experimental Demonstration of an Optical Packet and Circuit Integrated Ring Network Interoperated with WSON
We experimentally demonstrate an optical packet and circuit integrated (OPCI) ring network interoperated with a wavelength-switched optical network (WSON) in a network domain. OPCI network and WSON have distinct characteristics from each other: the methods to transfer path control messages and the protocols to set up or delete the optical connections in an optical circuit switch. To interoperate the two types of optical networks, we develop a common path control-plane which can establish or release an end-to-end path by only one autonomous distributed signaling process without stitching. In the common path control-plane, we modify the signaling protocol for OCS so that we can allocate a distinct wavelength to each link on an end-to-end path and also allocate a distinct path route to each of downstream and upstream directions in a bi-directional path. We experimentally show that the common path control-plane can dynamically establish end-to-end paths over the heterogeneous network including the two types of optical networks.
- 1 January 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E97.B (7) , 1325-1333
Experimental Demonstration of an Optical Packet and Circuit Integrated Ring Network Interoperated with WSON
We experimentally demonstrate an optical packet and circuit integrated (OPCI) ring network interoperated with a wavelength-switched optical network (WSON) in a network domain. OPCI network and WSON have distinct characteristics from each other: the methods to transfer path control messages and the protocols to set up or delete the optical connections in an optical circuit switch. To interoperate the two types of optical networks, we develop a common path control-plane which can establish or release an end-to-end path by only one autonomous distributed signaling process without stitching. In the common path control-plane, we modify the signaling protocol for OCS so that we can allocate a distinct wavelength to each link on an end-to-end path and also allocate a distinct path route to each of downstream and upstream directions in a bi-directional path. We experimentally show that the common path control-plane can dynamically establish end-to-end paths over the heterogeneous network including the two types of optical networks.
- Open Access
- 21 December 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 22 (1) , 47-54
Moving the boundary between wavelength resources in optical packet and circuit integrated ring network
Optical packet and circuit integrated (OPCI) networks provide both optical packet switching (OPS) and optical circuit switching (OCS) links on the same physical infrastructure using a wavelength multiplexing technique in order to deal with best-effort services and quality-guaranteed services. To immediately respond to changes in user demand for OPS and OCS links, OPCI networks should dynamically adjust the amount of wavelength resources for each link. We propose a resource-adjustable hybrid optical packet/circuit switch and transponder. We also verify that distributed control of resource adjustments can be applied to the OPCI ring network testbed we developed. In cooperation with the resource adjustment mechanism and the hybrid switch and transponder, we demonstrate that automatically allocating a shared resource and moving the wavelength resource boundary between OPS and OCS links can be successfully executed, depending on the number of optical paths in use.
- 21 December 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 22 (1) , 47-54
Open AccessMoving the boundary between wavelength resources in optical packet and circuit integrated ring network
Optical packet and circuit integrated (OPCI) networks provide both optical packet switching (OPS) and optical circuit switching (OCS) links on the same physical infrastructure using a wavelength multiplexing technique in order to deal with best-effort services and quality-guaranteed services. To immediately respond to changes in user demand for OPS and OCS links, OPCI networks should dynamically adjust the amount of wavelength resources for each link. We propose a resource-adjustable hybrid optical packet/circuit switch and transponder. We also verify that distributed control of resource adjustments can be applied to the OPCI ring network testbed we developed. In cooperation with the resource adjustment mechanism and the hybrid switch and transponder, we demonstrate that automatically allocating a shared resource and moving the wavelength resource boundary between OPS and OCS links can be successfully executed, depending on the number of optical paths in use.