JLJing Li

Jing Li

*This is an algorithmically generated author record based on publicly available information.

Jing Li has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Development of a directional resistivity logging-while-drilling tool using a joint-coil antenna and its geosteering applications

    by Zhong Wang, Huaping Wang, Treston Davis, Jing Li, Suming Wu, Wei Ren, Richard Ce Liu

    Geosteering is a key technique to increase oil and gas production rate, especially within a thin reservoir layer. The purpose of geosteering in production zone is to keep the drilling path in oil and gas bearing reservoir. In order to keep the drilling system inside the production zone, downhole sensors must be able to detect bed boundaries, which include identifying the boundary location with respect to the sensor, as well as boundary distance from the sensor. We have developed a directional resistivity logging-while-drilling (LWD) tool for geosteering applications. The directional LWD tool is equipped with a joint-coil antenna composed of an axially polarized coil Rz connected in series with two transversely polarized coils Rx. During a revolution around the axis of the tool, voltage of the axial coil VRz, voltage of the transverse coils VRx and tool face angle ø0, which indicates boundary direction, can be extracted through curve fitting the total voltage response of the joint-coil antenna. The distance to boundary can be derived from a 1D inversion. The LWD tool has been tested in several reservoirs in China and demonstrated capability to provide reliable and accurate estimations to the boundary direction and distance. Field data shows that the boundary detection depth can reach 2.1 m and 1.7 m when the tool is in a sand and shale formation. Utilizing wireline logging data from surrounding wells as reference, deviations between the reference and the measured distance to the boundary are within 0.2 m.