CWChristopher Wollin

Christopher Wollin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Christopher Wollin has a total of 190 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sources of dynamic and static deformation associated with eruptive and intrusive events on Reykjanes Peninsula, SW Iceland (2023-2026).

    by Philippe Jousset, Egill Gudnason, Gilda Currenti, Christopher Wollin, Lise Holstein, Regina Maass, Sergio Diaz-Meza, Maria Hurley, Michele Prestifilippo, Ella Jacobs, et al.

    Deformation and seismicity often precede and accompany volcanic eruptions. Models of magma emplacement and ground deformation associated with eruptions are obtained from GNSS and InSAR observations and associated seismic source mechanisms from seismometer observations. While satellite sensing techniques benefit from large spatial coverage with coarse temporal resolution and accuracy (mm range), seismometer networks acquire dense temporal data but are sparsely distributed and suffer from spatial aliasing. However, dynamic models of sources prior to the eruptive event are challenging to obtain, because they are in most cases too small or too slow to be observed accurately with conventional instrumentation. Here, we demonstrate that distributed fibre optic sensing with phase optical time domain reflectometry (Φ-OTDR) allows us to retrieve dynamic and static deformation processes associated to magma transfer from the reservoir below Svartsengi in SW Iceland, at depth and through diking events, prior to volcanic eruptions. Since November 2023, we are continuously monitoring an existing telecom fibre optic cable with a commercial iDAS interrogator, set-up on the western Reykjanes Peninsula. Reykjanes Peninsula is the onshore expression of the Mid-Atlantic oceanic ridge, where a series of magmatic intrusions and eruptions have occurred since 2020. Unlike previous studies, the used cable spans across locations from a large inflation/deflation area near dyke outbreaks at its eastern end, to a remote area where little signatures from eruptions are observed at its western end. In-situ down-sampled strain-rate data (1000 Hz to 200 Hz) are transferred continuously via internet to our computing centre at the GFZ in Germany. We further down-sample data to 2 minutes and perform time integration in order to analyse long period strain signals both spatially and temporally. We present resulting distributed dynamic strain (i.e., strain rate) observations and their source inversions associated with a series of eruptions and intrusions. Our inversions comprise a Mogi source and an Okada model, and we test several inversion methods. For each recorded eruption, we invert the distributed spatial strain taken every 2 minutes, allowing us to follow magma progression prior to each eruption with time. We investigate sizes and locations of the deflating reservoir and dykes with observed eruption locations. We also compare faults reactivated during the successive eruptions with the fibre optic cable records. These results show that distributed fibre optic sensing is capable of simultaneous seismological and geodetic observations in a volcanic context, opening the path for a better understanding and potentially improved real-time monitoring of volcanic processes.

  • Open Access

    FoBench: A Python toolbox for Fibre Optic Sensing signal processing and data handling.

    by Sergio Diaz-Meza, Jonas Pätzel, Chirstopher Wollin, Johannes Hart, Laura Hillmann

    Over the past decade, studies involving fibre optic sensing (FOS) have increased substantially, and consequentialy, optical fibres have become a prominent option for seismo-acoustic data acquisition. FOS can leverage existing telecom infrastructure in locations where installing conventional seismic stations is difficult, while providing dense measurements at high spatial and temporal sampling rates. However, replacing conventional sensor workflows with fibre optic sensing introduces major practical challenges such as: very large data volumes, heterogeneous native formats, high computational demand for fast processing and visualisation, and the need for intuitive yet flexible programming interfaces.Several open-source tools such as DASPy, DASCore and Xdas already address parts of these challenges. Here we present FoBench as a complementary architecture focused on practical, reproducible end-to-end workflows for FOS data handling and baseline signal processing. FoBench is designed to ease transition from conventional seismo-acoustic workflows by adopting usage patterns familiar to ObsPy and Pyrocko users. It supports native formats (I/O) from multiple interrogator manufacturers, provides high-speed interactive plotting for seamless data inspection, and organises campaign-scale archives through a structured Project-Unit-Dataset model.FoBench also targets operational scalability. It includes discontinuity-aware dataset handling, configurable processing pipelines, and memory-efficient greater-than-memory workflows via chunked outputs, with four interchangeable parallel wrappers (multiprocessing, MPI, Dask, and Process Pools). In addition, FoBench’s architecture is aligned with the in-development Geo-INQUIRE proposed metadata scheme to improve consistency and interoperability across archives.We present the design principles of FoBench, illustrate representative processing workflows on seismo-acoustic FOS datasets, and discuss benchmark comparisons against available toolboxes. Our goal is not to replace existing ecosystems, but to provide a lightweight, interoperable, and user-oriented framework that bridges the gap between raw FOS files and reproducible scientific products.

  • Open Access

    Geophysical Imaging and Monitoring of Tailings Storage Facilities: A Case Study at the Trident Copper Mine, Zambia, within the MOSMIN Project

    by Christopher Wollin, Rahmantara Trichandi, Veronica Rodriguez Tribaldos, Christian Haberland, Trond Ryberg, Charlotte Krawczyk, Moritz Kirsch

    Industrial mining operations create substantial amounts of residuals known as tailings or waste rocks. Their deposition creates amongst the largest human-made structures in the world both in spatial extent and mass. Their physical stability is not self-evident and tailings dam failures have been regularly documented throughout the world. In order to mitigate environmental and societal risks, stringent regulatory frameworks have been established, e.g. through the Global Industry Standard on Tailings Management (GISTM) in 2020 introduced by The United Nations Environment Programme (UNEP) , which mandates the implementation of monitoring concepts that manage risks throughout the lifecycle of a tailings facility. The EU-funded initiative MOSMIN (Multiscale observation services for mining-related deposits) addresses this key goal by establishing comprehensive monitoring solutions of mining-related deposits. The project combines (remote) Earth observation technologies with ground-based geophysical measurements to produce vertically integrated datasets which are subsequently analysed through advanced computational techniques, including machine learning algorithms, to characterise the spatio-temporal dynamics governing deposition and containment of tailings. This contribution focuses on fiber-optics-based passive seismic techniques used in MOSMIN to analyse ambient ground vibrations and generate spatially resolved shear-wave velocity models of tailings dams. The ambient noise tomography (ANT) aims at characterizing and monitoring their internal material properties across time and at different scales, resolutions and depths of investigation. We present results from a field campaign at the First Quantum Sentinel copper mine in Kalumbila, Zambia, during which passive seismic data was semi-continuously recorded with a network of passive sensors and a fibre-optic cable for almost a year. The mine’s tailings dam was equipped with 30 autonomous seismic sensors and a 7 km-long, trenched fiber-optic cable installed parallel to the dam structure and interrogated by a commercial Distributed Acoustic Sensing (DAS) system, recording continuous strain-rate data along the cable. The collected seismic data analysed here comprises 9 months of strain-rate recordings across 1.5 km of optic fiber. To investigate the temporal stability of the ambient seismic wavefield as required for subsurface monitoring purposes, we characterize how it is influenced by ongoing mining activity over weeks to months. We do so by calculating the strain-rate root-mean-square (RMS) in different frequency bands across the entire recording period of the DAS campaign. Further, we discuss the feasibility of retrieving high-resolution velocity profiles of the dam across space and time using Multi-channel Analysis of Surface Waves (MASW). One important aspect is the selection of recording periods with favourable noise conditions. We investigate different strategies for the selective stacking of several thousands of virtual-shot gathers obtained from cross-correlations of 30 s-long time windows. Results show that the MASW workflow is strongly influenced by the influx of anthropogenic noise created by the mining activity during the day time. Our case study works towards establishing and implementing fibre-optics-based passive seismic surveys, adapted to site-specific requirements, as a scalable, non-invasive framework for geotechnical monitoring of active TSFs. Joint analysis of passive seismic models with satellite-derived surface deformation or spectral information offers potential for improved understanding of surface–subsurface interactions in and along tailings dams.

  • Open Access

    Monitoring the gravel packing process during completion of a geothermal well using distributed fiber optic sensing

    by J. Hart, M.P. Lipus, C. Wollin, A. Saadat, C. Cunow, S. Kranz, T. Reinsch, C.M. Krawczyk

  • Open Access

    Fiber-optic monitoring of tailings dams in the MOSMIN project

    by Christopher Wollin, Verónica Rodríguez Tribaldos, Christian Haberland, Trond Ryberg, Rahmantara Trichandi, Charlotte Krawczyk, Moritz Kirsch

    Tailings and waste rocks are residuals of industrial mining operations and their collection amounts to the world's largest human-made structures both in spatial extent and mass. The catastrophic consequences of tailings dam failures have been extensively documented, prompting the establishment of stringent regulatory frameworks to mitigate environmental and societal risks. The United Nations Environment Programme (UNEP) introduced the Global Industry Standard on Tailings Management (GISTM) in 2020, which mandates the implementation of monitoring concepts that manage risks throughout the lifecycle of a tailings facility. Addressing this requirement is a key goal of MOSMIN (Multiscale observation services for mining-related deposits), an EU-funded initiative aimed at establishing comprehensive monitoring solutions for mining-related deposits. The project integrates Earth observation technologies with ground-based geophysical measurements to create unified datasets. These datasets are then analysed using advanced computational techniques, including machine learning algorithms, to characterise spatio-temporal dynamics relevant to the safety and sustainability of mining-related deposits.We contribute to these efforts with in situ high-resolution passive seismic measurements conducted at the tailings storage facilities of two copper mines: the FQM Sentinel mine in Kalumbila, Zambia, and the CODELCO Chuquicamata mine near Calama, Chile. Both experiments aim to seismically characterize the internal structure of the dams and to monitor subsurface processes at different scales, resolutions and depths of investigation through the creation of shear wave velocity models using ambient noise tomography (ANT). Similar array designs were implemented for both sites. Each site was equipped with a kilometers-long, trenched fiber-optic cable interrogated by a commercial Distributed Acoustic Sensing (DAS) system along with 30 conventional geophones. Both types of instrumentation were installed parallel to targeted tailings dam sectors and recorded during regular mining, disposal, and maintenance activities around the tailings facility for several months. However, the highly variable seismic wavefield generated by the active mining environment poses challenges for the ANT procedure. In order to obtain an overview of the wavefield’s spatio-temporal behaviour, we calculate the strain-rate root-mean-square (RMS) in different frequency bands across the entire recording period and fiber array, which encompasses approximately two months across 4 km and 9 months across 1.5 km of optic fiber for the Chile and Zambia sites, respectively. We present results regarding the spatio-temporal variation and stability of cross-correlations, and discuss the feasibility of performing Multi-channel Analysis of Surface Waves (MASW) to obtain high-resolution profiles of the velocity structure of the dam across space and time.Ultimately, tracking seismic changes in the dam structure could be used as an additional tool for non-invasive, spatially and temporally continuous geotechnical monitoring of the tailings storage facility and, in joint analysis with InSAR-derived surface deformation, reduce false alarms and enable physically meaningful, surface-subsurface interpretation.

  • Open Access

    Modern Data Containers for Scalable Archiving and Access of Distributed Acoustic Sensing Data

    by Javier Quinteros, Veronica Rodriguez Tribaldo, Christopher Wollin, Angelo Strollo

    In recent years, Distributed Acoustic Sensing (DAS) has emerged as a powerful technology in seismology, enabling the acquisition of high-resolution seismic data using optical fibers as sensors. As the number of DAS experiments continues to grow and DAS interrogators become able to record along ever longer fiber-optic cables, the volume of generated data is rapidly increasing, creating significant challenges for long-term archiving and efficient data access. These challenges include not only the storage of very large datasets—often on the order of hundreds of terabytes—but also the ability to fast random access and process subsets of the data.Currently, the DAS ecosystem is dominated by proprietary data formats defined by individual vendors. While HDF5 is increasingly adopted as a more open alternative, it presents strong limitations regarding scalability in multi-threaded and multi-process environments. In contrast, modern data container formats such as Zarr and TileDB offer native support for parallel I/O and flexible storage backends, ranging from local file systems to on-premise and cloud-based object storage.In this contribution, we present a comparative evaluation of these modern data formats for DAS applications, focusing on performance, scalability, and usability. We discuss the latest results obtained from the activities of the Geo-INQUIRE* project and assess the feasibility and potential benefits of their adoption for the long-term management and analysis of DAS datasets.* Geo-INQUIRE is funded by the European Union (GA 101058518)

  • Open Access

    Low-Frequency Distributed Acoustic Sensing reveals transient flow and heat-transfer regimes during geothermal injection

    by Johannes Hart, Christopher Wollin, Aurelio Andy, Toni Ledig, Thomas Reinsch, Charlotte Krawczyk

    High-resolution diagnostics of flow and heat transfer in deep geothermal wells are commonly constrained by sparse downhole instrumentation and production-logging tools that require well intervention, interrupting steady-state operations. Here, we demonstrate continuous flow profiling and convection-regime identification (pump-driven forced convection vs. buoyancy-driven natural convection) using fiber-optic sensing methods. We used a combination of the Low-Frequency Distributed Acoustic Sensing (LF-DAS) approach, which measures axial strain-rate changes along a fiber, and Distributed Temperature Sensing (DTS) in a 4.1 km MD (Measured Depth) geothermal injection well within Munich, Germany.During shut-in, LF-DAS reveals three persistent, depth-localized natural convection cells, characterized by distinct strain-rate patterns and coincident with rapid warming with depth, as observed in the DTS data. In quasi-steady-state injection, operationally occurring temperature changes as small as 10 mK/min in the injected fluid induce thermo-mechanical deformation along the fiber. These downward-propagating thermal fronts initially reflect pump-driven forced convection and enable flow profiling based on advective heat transport. From a depth of 3580 m MD, these fronts are blurred by the onset of buoyancy-driven natural convection. LF-DAS allows estimation of the plume-shedding frequency, plume height, travel distance, and velocity, all related to the temperature gradient measured with DTS. The accuracy of a threshold criterion for the onset of buoyancy-driven flow based on the temperature gradient is currently limited by the precision of the reference DTS measurement. Across all operational states, values range from 39 to 44 °C/km of true vertical depth.These findings show that fiber-optic sensing can detect fluid-flow pathways, convection behavior, and regime changes without well intervention, thereby improving continuous monitoring and reservoir characterization for sustainable geothermal operation.

  • Open Access

    Enhancing High-frequency Ambient Noise for shallow subsurface imaging using urban ambient noise DAS recordings

    by Leila Ehsaninezhad, Christopher Wollin, Verónica Rodríguez Tribaldos, Charlotte Krawczyk

    Distributed Acoustic Sensing (DAS) enables unused fiber optic cables in existing telecommunication networks, known as dark fibers, to function as dense arrays of virtual seismic receivers. Seismic waves generated by human activities and recorded by dense sensor networks provide an abundant, high-frequency energy source for high-resolution, non-invasive imaging of the urban subsurface. This approach enables detailed characterization of near-surface soils, sediments, and shallow geological structures with minimal surface impact, supporting applications such as groundwater management, site response and seismic amplification analysis, seismic hazard assessment, geothermal development, and urban planning. However, extracting coherent seismic signals from complex urban noise is challenging due to uneven source distribution, uncertain fiber deployment conditions, and variable coupling between the fiber and the ground. In particular, high-frequency range signals (e.g., above 4 Hz), needed to resolve shallow subsurface structures, are particularly difficult to recover. Two strategies can be used to address some of these challenges, by discarding poor quality seismic noise segments or by focusing on particularly favorable noise sources. In this study, we adopt the second approach and use vibrations generated by passing vehicles, particularly trains which are energetic sources that contain valuable high frequency information . Capturing and exploiting the seismic waves generated by these vehicles offers unique opportunities for efficient and high resolution urban seismic imaging.We present an enhanced ambient noise interferometry workflow designed to exploit noise sources that are particularly favorable to the fiber geometry, i.e. transient and strong sources occurring at the edge of the fiber segment to be analyzed. The workflow is applied to traffic-dominated seismic noise recorded on a dark fiber deployed along a major urban road in Berlin, Germany. First, we select short seismic noise segments that contain signals from passing trains and then apply a frequency–wavenumber filter to isolate the targeted train-generated surface waves while suppressing other wavefield contributions. The filtered data is then processed using a standard interferometric approach based on cross-correlations to retrieve coherent seismic phases from ambient noise, producing virtual shot gathers. Finally, Multichannel Analysis of Surface Waves is applied to derive one dimensional velocity models. This workflow targeted on specific transient sources reduces computational cost while enhancing dispersion measurements particularly at higher frequencies. By stacking the responses from tens of tracked vehicles, enhanced virtual shot gathers can be obtained and inverted to improve shallow subsurface models. This can be achieved with only a few hours of seismic noise recording, which is challenging using conventional ambient noise interferometry workflows.

  • Open Access

    Fiber-Optic Technology for Monitoring Asphalt Roads-Results of a Feasibility Study

    by Martin Peter Lipus, Johannes Hart, Christopher Wollin, Charlotte M. Krawczyk, Peter Mock, Matthias Breidbach, Bastian Wacker

    Infrastructure operators such as the Autobahn GmbH of the Federal Government in Germany depend on being able to use as much information as possible about the existing infrastructure for planning and maintenance. In addition to the existing non-destructive measurements, monitoring with sensor technology built into the infrastructure can also provide useful information for efficient maintenance planning. As part of a feasibility study, various setups of new developments in fiber-optic sensors were installed in a rehabilitated autobahn section in order to investigate traffic-related information as well as long-term integrity. In addition to temperature monitoring during the road construction, strain and acoustic measurements were recorded and evaluated during defined crossings of traffic. The preliminary results show that traffic relevant information such as the counting of passing vehicles, their velocity, vehicle type and axle load can be derived from the fiber-optic data. Furthermore, the results suggest that relevant parameters about the elastic properties of the roadwork (Young’s Modulus and material fatigue) can be extracted. At the present time, considerable efforts are still required for data preparation and data analysis to apply this monitoring technology permanently. This is the objective of the current and future development stages.

  • Fiber Optic Sensing for Volcano Monitoring and Imaging Volcanic Processes

    by Philippe Jousset, Gilda Currenti, Shane Murphy, Eva P. S. Eibl, Corentin Caudron, Lise Retailleau, Christopher Wollin, Sara Klaasen, Takeshi Nishimura, Andreas Fichtner, et al.