Yaping Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yaping Guo has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Lianwu Xie
State Key Laboratory of Utilization of Woody Oil Resource, College of Chemistry and Chemical Engineering, Central South University of Forestry and Technology, Changsha, P. R. China
7 shared publications Bin Wang
College of Pharmaceutical and Bioengineering, Hunan Chemical Vocational Technology College, Zhuzhou, China
2 shared publications- Dianling Shen
College of Sciences, Central South University of Forestry and Technology, Changsha 410004, China
2 shared publications - Mao Wu
College of Sciences, Central South University of Forestry and Technology, Changsha 410004, China
2 shared publications - Yajun Fan
College of Sciences, Central South University of Forestry and Technology, Changsha 410004, China
2 shared publications Yujun Zhong
College of Chemistry and Chemical Engineering, Central South University of Forestry and Technology, Changsha, China
2 shared publications
Latest Publications
- 23 May 2024
- Published by Springer Nature in Microchimica Acta
- Vol. 191 (6) , 1-10
A molecularly imprinted electrochemical sensor MIP/Cu-MOF/rGO/AuNPs/GCE for highly sensitive detection of electroneutral organophosphorus pesticide residues
A novel electrochemical sensor, MIP/Cu-MOF/rGO/AuNPs/GCE, was developed by depositing gold nanoparticles, coating Cu-MOF/GO on the surface of glassy carbon electrode (GCE) before electroreducing graphene oxide (GO) to rGO and covering molecularly imprinted membrane by electropolymerization for highly sensitive detection of electroneutral organophosphorus pesticide residues in agricultural product. Cyclic voltammetry, differential pulse voltametry, scanning electron microscopy, energy-dispersive spectroscopy, and atomic force microscopy were used to characterize the imprinted sensor. Several key factors such as chitosan concentration, suspension volume, pH of polymerization solution, and polymerization scanning rate during preparation of the imprinted sensor were optimized in detail. When electroneutral phosmet was used as a template, the linear range of MIP/Cu-MOF/rGO/AuNPs/GCE for detecting phosmet was 1.00 × 10−14–5.00 × 10−7 mol/L with the limit of detection of 7.20 × 10−15 mol/L at working potentials of − 0.2 to 0.6 V. The selectivity, reproducibility, and repeatability of MIP/Cu-MOF/rGO/AuNPs/GCE were all acceptable. The recoveries of this method for determining phosmet in real samples ranged from 94.2 to 106.5%. The MIP/Cu-MOF/rGO/AuNPs/GCE sensor could be applied to detect electroneutral pesticide residues in organisms and agricultural products. Graphical Abstract
- 23 May 2024
- Published by Springer Nature in Microchimica Acta
- Vol. 191 (6) , 1-10
A molecularly imprinted electrochemical sensor MIP/Cu-MOF/rGO/AuNPs/GCE for highly sensitive detection of electroneutral organophosphorus pesticide residues
A novel electrochemical sensor, MIP/Cu-MOF/rGO/AuNPs/GCE, was developed by depositing gold nanoparticles, coating Cu-MOF/GO on the surface of glassy carbon electrode (GCE) before electroreducing graphene oxide (GO) to rGO and covering molecularly imprinted membrane by electropolymerization for highly sensitive detection of electroneutral organophosphorus pesticide residues in agricultural product. Cyclic voltammetry, differential pulse voltametry, scanning electron microscopy, energy-dispersive spectroscopy, and atomic force microscopy were used to characterize the imprinted sensor. Several key factors such as chitosan concentration, suspension volume, pH of polymerization solution, and polymerization scanning rate during preparation of the imprinted sensor were optimized in detail. When electroneutral phosmet was used as a template, the linear range of MIP/Cu-MOF/rGO/AuNPs/GCE for detecting phosmet was 1.00 × 10−14–5.00 × 10−7 mol/L with the limit of detection of 7.20 × 10−15 mol/L at working potentials of − 0.2 to 0.6 V. The selectivity, reproducibility, and repeatability of MIP/Cu-MOF/rGO/AuNPs/GCE were all acceptable. The recoveries of this method for determining phosmet in real samples ranged from 94.2 to 106.5%. The MIP/Cu-MOF/rGO/AuNPs/GCE sensor could be applied to detect electroneutral pesticide residues in organisms and agricultural products. Graphical Abstract
- Open Access
- 28 October 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (21) , 13089
Deep-Eutectic-Solvent-Based Mesoporous Molecularly Imprinted Polymers for Purification of Gallic Acid from Camellia spp. Fruit Shells
To produce antioxidant substances from agricultural waste Camellia spp. fruit shells before their further utilization, gallic acid from five kinds of Camellia spp. fruit shells was separated on specific recognition by deep eutectic solvent molecularly imprinted polymers (DES@MIPs), which were prepared by bulk polymerization using gallic acid as the template and deep eutectic solvents (α-methylacrylic acid and choline chloride) as functional monomers. The optimized DES@MIPs were characterized by scanning electron microscopy, particle size analysis, nitrogen sorption porosimetry, elemental analysis, Fourier transform infrared spectroscopy, and thermal gravimetric analysis. The adsorptive behavior of gallic acid on DES@MIPs was also investigated. The results indicated that DES@MIPs were successfully prepared as mesoporous materials with average pore diameter of 9.65 nm and total pore volume of 0.315 cm3 g−1, and the adsorption behavior was multilayer adsorption and pseudo-second-order kinetics with the saturation adsorptive capacity of gallic acid reaching 0.7110 mmol g−1. Although the content of gallic acid in five fruit shells was quite different, the purification recovery of gallic acid was high, ranging from 87.85–96.75% with a purity over 80%. Thus, the purification of gallic acid from Camellia spp. fruit shells could be realized feasibly using DES@MIPs with favorable economic and environmental benefits.
- 28 October 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (21) , 13089
Open AccessDeep-Eutectic-Solvent-Based Mesoporous Molecularly Imprinted Polymers for Purification of Gallic Acid from Camellia spp. Fruit Shells
To produce antioxidant substances from agricultural waste Camellia spp. fruit shells before their further utilization, gallic acid from five kinds of Camellia spp. fruit shells was separated on specific recognition by deep eutectic solvent molecularly imprinted polymers (DES@MIPs), which were prepared by bulk polymerization using gallic acid as the template and deep eutectic solvents (α-methylacrylic acid and choline chloride) as functional monomers. The optimized DES@MIPs were characterized by scanning electron microscopy, particle size analysis, nitrogen sorption porosimetry, elemental analysis, Fourier transform infrared spectroscopy, and thermal gravimetric analysis. The adsorptive behavior of gallic acid on DES@MIPs was also investigated. The results indicated that DES@MIPs were successfully prepared as mesoporous materials with average pore diameter of 9.65 nm and total pore volume of 0.315 cm3 g−1, and the adsorption behavior was multilayer adsorption and pseudo-second-order kinetics with the saturation adsorptive capacity of gallic acid reaching 0.7110 mmol g−1. Although the content of gallic acid in five fruit shells was quite different, the purification recovery of gallic acid was high, ranging from 87.85–96.75% with a purity over 80%. Thus, the purification of gallic acid from Camellia spp. fruit shells could be realized feasibly using DES@MIPs with favorable economic and environmental benefits.
- 1 September 2022
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 30 (11) , 4863-4876
Ion Imprinted Sodium Alginate Hydrogel Beads Enhanced with Carboxymethyl Cellulose and β-Cyclodextrin to Improve Adsorption for Cu2+
- 1 September 2022
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 30 (11) , 4863-4876
Ion Imprinted Sodium Alginate Hydrogel Beads Enhanced with Carboxymethyl Cellulose and β-Cyclodextrin to Improve Adsorption for Cu2+
- Open Access
Selective Recognition of Gallic Acid Using Hollow Magnetic Molecularly Imprinted Polymers with Double Imprinting Surfaces
Gallic acid is widely used in the field of food and medicine due to its diversified bioactivities. The extraction method with higher specificity and efficiency is the key to separate and purify gallic acid from complex biological matrix. Herein, using self-made core-shell magnetic molecularly imprinted polymers (MMIP) with gallic acid as template, a hollow magnetic molecularly imprinted polymer (HMMIP) with double imprinting/adsorption surfaces was prepared by etching the mesoporous silica intermediate layer of MMIP. The characterization and adsorption research showed that the HMMIP had larger specific surface area, higher magnetic response strength and a more stable structure, and the selectivity and saturated adsorption capacity (2.815 mmol/g at 318 K) of gallic acid on HMMIP were better than those of MMIP. Thus, in addition to MMIP, the improved HMMIP had excellent separation and purification ability to selectively extract gallic acid from complex matrix with higher specificity and efficiency.
Open AccessSelective Recognition of Gallic Acid Using Hollow Magnetic Molecularly Imprinted Polymers with Double Imprinting Surfaces
Gallic acid is widely used in the field of food and medicine due to its diversified bioactivities. The extraction method with higher specificity and efficiency is the key to separate and purify gallic acid from complex biological matrix. Herein, using self-made core-shell magnetic molecularly imprinted polymers (MMIP) with gallic acid as template, a hollow magnetic molecularly imprinted polymer (HMMIP) with double imprinting/adsorption surfaces was prepared by etching the mesoporous silica intermediate layer of MMIP. The characterization and adsorption research showed that the HMMIP had larger specific surface area, higher magnetic response strength and a more stable structure, and the selectivity and saturated adsorption capacity (2.815 mmol/g at 318 K) of gallic acid on HMMIP were better than those of MMIP. Thus, in addition to MMIP, the improved HMMIP had excellent separation and purification ability to selectively extract gallic acid from complex matrix with higher specificity and efficiency.
- Open Access
Vinyl Phosphate-Functionalized, Magnetic, Molecularly-Imprinted Polymeric Microspheres’ Enrichment and Carbon Dots’ Fluorescence-Detection of Organophosphorus Pesticide Residues
The rapid detection of organophosphorus pesticide residues in food is crucial to food safety. One type of novel, magnetic, molecularly-imprinted polymeric microsphere (MMIP) was prepared with vinyl phosphate and 1-octadecene as a collection of dual functional monomers, which were screened by Gaussian09W molecular simulation. MMIPs were used to enrich organic phosphorus, which then detected by fluorescence quenching in vinyl phosphate-modified carbon dots (CDs@VPA) originated from anhydrous citric acid. MMIPs and CDs@VPA were characterized by TEM, particle size analysis, FT-IR, VSM, XPS, adsorption experiments, and fluorescence spectrophotometry in turn. Through the fitting data from experiment and Gaussian quantum chemical calculations, the molecular recognition properties and the mechanism of fluorescence detection between organophosphorus pesticides and CDs@VPA were also investigated. The results indicated that the MMIPs could specifically recognize and enrich triazophos with the saturated adsorption capacity 0.226 mmol g−1, the imprinting factor 4.59, and the limit of recognition as low as 0.0006 mmol L−1. Under optimal conditions, the CDs@VPA sensor has shown an extensive fluorescence property with a LOD of 0.0015 mmol L−1 and the linear range from 0.0035 mmol L−1 to 0.20 mmol L−1 (R2 = 0.9988) at 390 nm. The mechanism of fluorescence detection of organic phosphorus with CDs@VPA sensor might be attributable to hydrogen bonds formed between heteroatom O, N, S, or P, and the O−H group, which led to fluorescent quenching. Meanwhile, HN−C=O and Si−O groups in CDs@VPA system might contribute to cause excellent blue photoluminescence. The fluorescence sensor was thorough successfully employed to the detection of triazophos in cucumber samples, illustrating its tremendous value towards food sample analysis in complex matrix.
Open AccessVinyl Phosphate-Functionalized, Magnetic, Molecularly-Imprinted Polymeric Microspheres’ Enrichment and Carbon Dots’ Fluorescence-Detection of Organophosphorus Pesticide Residues
The rapid detection of organophosphorus pesticide residues in food is crucial to food safety. One type of novel, magnetic, molecularly-imprinted polymeric microsphere (MMIP) was prepared with vinyl phosphate and 1-octadecene as a collection of dual functional monomers, which were screened by Gaussian09W molecular simulation. MMIPs were used to enrich organic phosphorus, which then detected by fluorescence quenching in vinyl phosphate-modified carbon dots (CDs@VPA) originated from anhydrous citric acid. MMIPs and CDs@VPA were characterized by TEM, particle size analysis, FT-IR, VSM, XPS, adsorption experiments, and fluorescence spectrophotometry in turn. Through the fitting data from experiment and Gaussian quantum chemical calculations, the molecular recognition properties and the mechanism of fluorescence detection between organophosphorus pesticides and CDs@VPA were also investigated. The results indicated that the MMIPs could specifically recognize and enrich triazophos with the saturated adsorption capacity 0.226 mmol g−1, the imprinting factor 4.59, and the limit of recognition as low as 0.0006 mmol L−1. Under optimal conditions, the CDs@VPA sensor has shown an extensive fluorescence property with a LOD of 0.0015 mmol L−1 and the linear range from 0.0035 mmol L−1 to 0.20 mmol L−1 (R2 = 0.9988) at 390 nm. The mechanism of fluorescence detection of organic phosphorus with CDs@VPA sensor might be attributable to hydrogen bonds formed between heteroatom O, N, S, or P, and the O−H group, which led to fluorescent quenching. Meanwhile, HN−C=O and Si−O groups in CDs@VPA system might contribute to cause excellent blue photoluminescence. The fluorescence sensor was thorough successfully employed to the detection of triazophos in cucumber samples, illustrating its tremendous value towards food sample analysis in complex matrix.
- Open Access
Rapid Colorimetric Detection of Cartap Residues by AgNP Sensor with Magnetic Molecularly Imprinted Microspheres as Recognition Elements
The overuse of cartap in tea tree leads to hazardous residues threatening human health. A colorimetric determination was established to detect cartap residues in tea beverages by silver nanoparticles (AgNP) sensor with magnetic molecularly imprinted polymeric microspheres (Fe3O4@mSiO2@MIPs) as recognition elements. Using Fe3O4 as supporting core, mesoporous SiO2 as intermediate shell, methylacrylic acid as functional monomer, and cartap as template, Fe3O4@mSiO2@MIPs were prepared to selectively and magnetically separate cartap from tea solution before colorimetric determination by AgNP sensors. The core-shell Fe3O4@mSiO2@MIPs were also characterized by FT-IR, TEM, VSM, and experimental adsorption. The Fe3O4@mSiO2@MIPs could be rapidly separated by an external magnet in 10 s with good reusability (maintained 95.2% through 10 cycles). The adsorption process of cartap on Fe3O4@mSiO2@MIPs conformed to Langmuir adsorption isotherm with maximum adsorption capacity at 0.257 mmol/g and short equilibrium time of 30 min at 298 K. The AgNP colorimetric method semi-quantified cartap ≥5 mg/L by naked eye and quantified cartap 0.1–5 mg/L with LOD 0.01 mg/L by UV-vis spectroscopy. The AgNP colorimetric detection after pretreatment with Fe3O4@mSiO2@MIPs could be successfully utilized to recognize and detect cartap residues in tea beverages.
Open AccessRapid Colorimetric Detection of Cartap Residues by AgNP Sensor with Magnetic Molecularly Imprinted Microspheres as Recognition Elements
The overuse of cartap in tea tree leads to hazardous residues threatening human health. A colorimetric determination was established to detect cartap residues in tea beverages by silver nanoparticles (AgNP) sensor with magnetic molecularly imprinted polymeric microspheres (Fe3O4@mSiO2@MIPs) as recognition elements. Using Fe3O4 as supporting core, mesoporous SiO2 as intermediate shell, methylacrylic acid as functional monomer, and cartap as template, Fe3O4@mSiO2@MIPs were prepared to selectively and magnetically separate cartap from tea solution before colorimetric determination by AgNP sensors. The core-shell Fe3O4@mSiO2@MIPs were also characterized by FT-IR, TEM, VSM, and experimental adsorption. The Fe3O4@mSiO2@MIPs could be rapidly separated by an external magnet in 10 s with good reusability (maintained 95.2% through 10 cycles). The adsorption process of cartap on Fe3O4@mSiO2@MIPs conformed to Langmuir adsorption isotherm with maximum adsorption capacity at 0.257 mmol/g and short equilibrium time of 30 min at 298 K. The AgNP colorimetric method semi-quantified cartap ≥5 mg/L by naked eye and quantified cartap 0.1–5 mg/L with LOD 0.01 mg/L by UV-vis spectroscopy. The AgNP colorimetric detection after pretreatment with Fe3O4@mSiO2@MIPs could be successfully utilized to recognize and detect cartap residues in tea beverages.
- 13 June 2018
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 10 (27) , 3317-3324
Magnetic surface molecularly imprinted polymeric microspheres using gallic acid as a segment template for excellent recognition of ester catechins
Magnetic surface molecularly imprinted polymeric microspheres (MMIPs) were prepared by using gallic acid (GA) as a segment template for the solid extraction of ester catechins as a whole from complex samples. MMIPs were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, and vibrating sample magnetometry. The results of the adsorption experiments indicated that the saturated adsorption capacity of GA on MMIPs was 0.21 mmol g−1, and the imprinting factor was 5.86; MMIPs had higher adsorption capacity for ester catechins than benzoic acid, salicylic acid, and 2,4-dihydroxybenzoic acid. The adsorption process of MMIPs could be better described by pseudo secondary rate equation, and it was consistent with the Langmuir adsorption model. In addition to GA, MMIPs could selectively recognize ester catechins in a tea solution without column packing. Thus, MMIPs prepared using GA as a segment template can be used in selective separation and enrichment of ester catechins from tea samples for functional food production.
- 13 June 2018
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 10 (27) , 3317-3324
Magnetic surface molecularly imprinted polymeric microspheres using gallic acid as a segment template for excellent recognition of ester catechins
Magnetic surface molecularly imprinted polymeric microspheres (MMIPs) were prepared by using gallic acid (GA) as a segment template for the solid extraction of ester catechins as a whole from complex samples. MMIPs were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, and vibrating sample magnetometry. The results of the adsorption experiments indicated that the saturated adsorption capacity of GA on MMIPs was 0.21 mmol g−1, and the imprinting factor was 5.86; MMIPs had higher adsorption capacity for ester catechins than benzoic acid, salicylic acid, and 2,4-dihydroxybenzoic acid. The adsorption process of MMIPs could be better described by pseudo secondary rate equation, and it was consistent with the Langmuir adsorption model. In addition to GA, MMIPs could selectively recognize ester catechins in a tea solution without column packing. Thus, MMIPs prepared using GA as a segment template can be used in selective separation and enrichment of ester catechins from tea samples for functional food production.