CSChristopher de Saxe

Christopher de Saxe

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Christopher de Saxe has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A dataset of logistics sites in England and Wales: Location, size, type and loading bays

    by Christopher de Saxe, Daniel Ainalis, David Cebon


  • Open Access

    An electric road system or big batteries: Implications for UK road freight

    by Christopher de Saxe, Daniel Ainalis, John Miles, Philip Greening, Adam Gripton, Christopher Thorne, David Cebon


  • Open Access

    Analysis of Fast Charging Arrangements for Electric Heavy Goods Vehicles

    by Parth Deshpande, Christopher de Saxe, Daniel Ainalis, John Miles, David Cebon

    Electric heavy goods vehicles (HGVs) are a key step towards reducing road freight emissions. However, they require large batteries and fast chargers. There is interest in exploring high-capacity chargers at warehouse docks that can charge at a rate of 1 MW. These chargers are expensive and complex but are needed to run big-battery electric HGVs without a change in logistics operations. Hence, this paper aims at evaluating scenarios in which high-capacity chargers are useful by estimating battery sizes required for various logistics operations. The paper also aims to evaluate the circumstances under which high-capacity chargers are economically feasible using a 15-year cost break-even model. It is seen that high-capacity chargers are useful and economically feasible for journeys with smaller stop durations and longer distances, but not for journeys with longer stops. It is also observed that they need to be supplemented by different charging strategies and dynamic charging techniques.

  • Open Access

    A breakeven cost analysis framework for electric road systems

    by Parth Deshpande, Christopher de Saxe, Daniel Ainalis, John Miles, David Cebon


  • Camera-Based Articulation Angle Sensing for Heavy Goods Vehicles

    by Christopher de Saxe, David Cebon

    Articulation angle sensing is an essential component of manoeuvrability and stability control systems for articulated heavy goods vehicles, particularly long combination vehicles. Existing solutions to this sensing task are limited by reliance on trailer modifications or information or by measurement accuracy, or both, restricting commercial adoption. In this paper we present a purely tractor-based sensor concept comprising a rear-facing camera and the parallel tracking and mapping (PTAM) image processing algorithm. The system requires no prior knowledge of or modifications to the trailer, is compatible with planar and non-planar trailer shapes, and with multiply-articulated vehicle combinations. The system is validated in full-scale vehicle tests on both a tractor semi-trailer combination and a truck and full-trailer combination, demonstrating robust performance in a number of conditions, including trailers with non-planar geometry and with minimal visual features. Average RMS measurement errors of 1.19, 1.03 and 1.53 degrees were demonstrated for the semi-trailer and full-trailer (drawbar and semi-trailer) respectively. This compares favourably with the state-of-the-art in the published literature. A number of improvements are proposed for future development based on the observations in this research.


  • Measurement of articulation angle by image template matching

    by Christopher de Saxe, David Cebon

    Articulated heavy goods vehicles and long combination vehicles offer improved efficiency and emissions but reduced low-speed manoeuvrability and high-speed stability compared to rigid lorries. Active control systems can help to address these issues but require additional instrumentation, particularly articulation angle sensing. Existing commercial and research solutions for articulation sensing are limited either in terms of measurement accuracy or practicality. In this paper, a camera-based articulation angle sensing concept using template-matching and an Unscented Kalman Filter is investigated, including detailed simulation and full-scale vehicle experiments. The effects of aliasing and trailer pitch angle are studied, and a correction model for trailer pitch is proposed. The sensing system demonstrates superior measurement accuracy compared to the published literature, with root mean square errors of 0.8°–1.8° for articulation angles up to 37° in full-scale experiments. The sensor solution proposed in this work addresses more of the practical criteria for this problem than the comparable solutions in the literature. It does so through the novel camera and image processing system which is unique to this application. The proposed sensor offers acceptable measurement accuracy in real-time, is non-contact, requires minimal knowledge of trailer parameters and is compatible with semi-trailers and rigid draw-bar trailers.


  • Camera-based measurement of cyclist motion

    by Chris Eddy, Christopher de Saxe, David Cebon

    Heavy goods vehicles are overrepresented in cyclist fatality statistics in the United Kingdom relative to their proportion of total traffic volume. In particular, the statistics highlight a problem for vehicles turning left across the path of a cyclist on their inside. In this article, we present a camera-based system to detect and track cyclists in the blind spot. The system uses boosted classifiers and geometric constraints to detect cyclist wheels, and Canny edge detection to locate the ground contact point. The locations of these points are mapped into physical coordinates using a calibration system based on the ground plane. A Kalman Filter is used to track and predict the future motion of the cyclist. Full-scale tests were conducted using a construction vehicle fitted with two cameras, and the results compared with measurements from an ultrasonic-sensor system. Errors were comparable to the ultrasonic system, with average error standard deviation of 4.3 cm when the cyclist was 1.5 m from the heavy goods vehicles, and 7.1 cm at a distance of 1 m. When results were compared to manually extracted cyclist position data, errors were less than 4 cm at separations of 1.5 and 1 m. Compared to the ultrasonic system, the camera system requires simple hardware and can easily differentiate cyclists from stationary or moving background objects such as parked cars or roadside furniture. However, the cameras suffer from reduced robustness and accuracy at close range and cannot operate in low-light conditions.


  • Open Access

    Estimation of trailer off-tracking using visual odometry

    by Christopher de Saxe, David Cebon

    High-capacity vehicles have been shown to be highly effective in reducing emissions associated with road freight transport. However, the reduced manoeuvrability of long vehicles often necessitates the use of active trailer steering. Path-following trailer steering systems are very effective in this regard, but are currently limited to on-highway applications due to the manner in which trailer off-tracking is estimated. In this work, a novel trailer off-tracking measurement concept is introduced which is independent of wheel slip and ground surface conditions, and requires no additional sensor measurements or parameter data from the tractor. The concept utilises a stereo camera pair affixed to the trailer and a visual odometry-based algorithm to calculate off-tracking. The concept was evaluated in detailed simulation and full-scale vehicle tests, demonstrating its feasibility and highlighting some important characteristics. RMS measurement errors of 0.11–0.12 m (3.3–3.6%) were obtained in a challenging visual environment.


  • A Visual Template-Matching Method for Articulation Angle Measurement

    by Christopher De Saxe, David Cebon

    Active control systems for heavy goods vehicles (HGVs) are becoming more sophisticated, necessitating more extensive and sophisticated instrumentation. For articulated HGVs, articulation angle sensing is crucial for most such systems and existing and proposed sensing methods are limited either in terms of commercial feasibility or measurement accuracy. This paper investigates a vision-based system consisting of a single tractor-mounted camera, a template-matching image processing algorithm and an Unscented Kalman Filter. The method is applicable to trailers with planar fronts and requires minimal geometric knowledge of the trailer. A series of tests was performed on a tractor semi-trailer combination. The vision system was able to measure articulation angle with RMS errors of 0.64° -- 0.79° and maximum errors of 1.91° -- 2.76°.