Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aymn Abdulrahman has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Conversion of petroleum oil sludge into syngas and power using integrated gasification and CO2 capture equilibrium model

    by Eeyad Alahmadi, Muhammad Ammar, Abdulkader S. Hanbazazah, Aymn Abdulrahman, Suhaib Umer Ilyas, Muhammad Shahbaz

  • Open Access

    Sustainable Utilization of Phoenix Date Palm Biomass via Extraction of Lignin Using Pyridinium-Based Protic Ionic Liquid

    by Aymn Abdulrahman, Tazien Rashid, Khuram Maqsood, Rizwan Nasir, Ahmed Aljehani, Mohammed A. Almarshoud, Eeyad Alahmadi, Suhaib Umer Ilyas

    Lignin is a renewable biopolymer widely available in industrial crops, yet its efficient separation and valorization remain challenging due to its heterogeneous structure derived from coniferyl, sinapyl, and p-coumaryl alcohol units. Its properties vary with the biomass type and extraction method. This study investigates lignin extraction from four Saudi date palm leaf varieties (Ajwa, Safawi, Amber, and Rabia) using a newly synthesized protic ionic liquid (PIL) composed of a pyridinium cation and formate anion. Extraction was carried out at temperatures ranging from 25 to 125 °C for 1 to 6 h. The PIL achieved high lignin recovery, up to 90%, under mild conditions (75 °C, 3 h), while also enabling subsequent cellulose pulp saccharification. In the second stage, extracted lignin samples were characterized using structural, thermal, and morphological analysis techniques in a comparative approach. It was concluded that PIL-treated lignin resulted in enhanced phenolic and aromatic contents with increased thermal stability, making it a suitable biofuel. The findings highlight date palm leaves as a low-cost lignin source suitable for pharmaceutical applications and the development of bionanocomposites with enhanced thermal performance.

  • Open Access

    Evaluation of Jojoba Oil Biodiesel as a Potential Fuel for Combustion Application

    by Aymn Abdulrahman, Eeyad Al-Ahmadi

    The demand for efficient energy systems is rising due to environmental issues and the decline of fossil fuels. Therefore, the studies are exploring the use of biofuels as an alternative fuel. The focus of this study is to produce biodiesel from jojoba oil and use it along with other fuels in internal combustion engines. The transesterification method was used for the production of biodiesel using methanol and a catalyst (sodium hydroxide), which yielded long-chain fatty acid methyl esters (C16–C20) and physicochemical properties were investigated. Gas chromatography-mass spectrometry and nuclear magnetic resonance were used to analyze raw jojoba oil and biodiesel. Moreover, the ignition delay (ID) time and derived cetane number (DCN) were measured by an ignition quality tester (IQT). The density (870 kg m−3) and viscosity (4.21 mm2 s−1) of the biodiesel were comparable to ASTM D6751-24 requirements and were also closely aligned with US 2D petrodiesel quality. The IQT test demonstrated that biodiesel produced from jojoba oil has a higher DCN and shorter ID than US 2D petro-diesel. Thus, the overall results adequately illustrate the potential to use biodiesel as a sustainable energy application.


  • Open Access

    Process optimization of camel dung-derived biogas upgrading through ionic liquid–incorporated polyethersulfone membranes

    by Aymn Abdulrahman, Muhammad Faisal Usman, Hafiz Abdul Mannan, Abdulkader S. Hanbazazah, Ahmed Aljehani, Suhaib Umer Ilyas

    This study is focused on optimization of the biogas upgradation process by using ionic liquid–embedded polyethersulfone (PES) membranes. Process optimization using response surface methodology (RSM) via central composite design (CCD) was conducted to model and optimize the synthesis and separation performance of these membranes. The membranes were synthesized with varying loadings of [emim][Tf2N] ionic liquid by the solution casting technique. Feed pressure and ionic liquid loading were taken as the independent variables, whereas CO2 permeability, CH4 permeability, and CO2/CH4 selectivity were chosen as the process responses. At optimum IL concentration (20%) and feed pressure (5 bar), CO2 permeability of PES/[emim][Tf2N] membrane was found to be 119.45 barrer with CO2/CH4 selectivity of 31.07 and overall desirability of 0.52. From SEM analysis, a dense and defect-free structure of PES/[emim][Tf2N] was observed, which confirmed successful incorporation of the ionic liquid within the polymer matrix. Similarly, uniform distribution of [emim][Tf2N] ionic liquid in PES matrix was confirmed by EDX analysis. These results confirm that PES/[emim][Tf2N] membranes have a huge potential to upgrade biogas and enrich biomethane for circular bioeconomy and renewable energy goals.

  • Open Access

    Polysulfone/Graphene Oxide Mixed Matrix Membranes for Improved CO2/CH4 Separation

    by Mustafa Alsaady, Sharjeel Waqas, Mohammed A. Almarshoud, Khuram Maqsood, Aymn Abdulrahman, Yuying Yan

    This research focuses on developing and optimizing mixed matrix membranes (MMMs) by incorporating graphene oxide (GO) into a polysulfone (PSF) matrix to enhance the separation performance of CO2 and CH4. The morphology and gas separation performance of the MMMs were systematically characterized. The incorporation of GO enhanced gas permeation and CO2/CH4 selectivity, as evaluated using a gas permeation setup. Notably, the PSF/GO-0.3 wt.% membrane exhibited superior performance, achieving a CO2 permeability of 21.63 Barrer, among the highest reported for PSF-based MMMs. Additionally, the membrane demonstrated a CO2/CH4 selectivity of 14.32, highlighting its effectiveness in distinguishing between the two gases, which is essential for carbon capture and natural gas decontamination applications. The uniform distribution of GO within the polymer matrix contributed to the membrane’s enhanced performance. Furthermore, the MMMs exhibited outstanding resistance to CO2 plasticization, with the PSF/GO-0.3 wt.% membrane maintaining its performance at pressures up to 10 bar, a significant improvement over the pristine PSF membrane, which failed at 4 bar. The improved plasticization resistance is ascribed to the reinforcing effect of GO, which stabilizes the polymer matrix, minimizing CO2-induced swelling. The PSF/GO-0.3 wt.% membrane exhibited exceptional CO2 permeability, selectivity, and plasticization resistance, making it a viable alternative for industrial gas separation applications and outperforming previously reported PSF-based MMMs.


  • Open Access

    Effect of VTMS-Modified TiO2 Nanoparticles on CO2 Separation Performance of Polysulfone-Based Mixed Matrix Membranes

    by Mustafa Alsaady, Muhammad Faisal Usman, Hafiz Abdul Mannan, Mohamed Amine Ben Ali, Aymn Abdulrahman, Anas Ahmed, Suhaib Umer Ilyas

    Polysulfone (PSF), despite its excellent thermal and mechanical stability, exhibits moderate gas separation performance and poor compatibility with inorganic fillers, resulting in interfacial voids and structural defects. This study addressed these limitations by incorporating vinyltrimethoxysilane (VTMS)-functionalized TiO2 nanoparticles into PSF matrix to develop mixed matrix membranes (MMMs) for selective CO2/N2 separation. Membranes with 1–5 wt.% VTMS@TiO2 loadings were fabricated via solution casting, and their gas separation performance was systematically evaluated. VTMS modification enhanced the dispersion and interfacial adhesion of TiO2 within the PSF matrix, as confirmed by SEM, FTIR, XRD, and TGA analyses. The 4 wt.% VTMS@TiO2 loaded membrane showed optimal performance, with a CO2 permeability of 8.48 barrer and a CO2/N2 selectivity of 26.50 due to stronger polymer–filler interactions and enhanced CO2 affinity by VTMS functional groups. This membrane has shown stable transport behavior and favorable CO2 selectivity as confirmed by pressure- and temperature-dependent permeation studies. Robeson plot analysis showed that the optimized membrane approached the upper bound, demonstrating a significant improvement over pure PSF. The study confirmed that VTMS-functionalized TiO2 enhanced both permeability and selectivity through improved filler dispersion, interfacial integrity, and CO2 affinity.


  • A process simulation and optimization study of non‐catalytic biodiesel synthesis from algae oil using supercritical methanol

    by A. B. Mahfouz, A. Abdulrahman, M. Alsaady, A. Ahmed, A. S. Hanbazazah

    The growing global demand for sustainable and renewable energy sources has intensified research efforts in biodiesel production. This study investigates the optimization and simulation of biodiesel production from Chlorella algae oil using a supercritical transesterification process without any catalyst. Avoiding the use of a catalyst eliminates potential issues associated with water content in the algae oil and reduces pretreatment costs. The research involves a two‐step approach: conducting a simulation study to develop a validated process simulation model, followed by process optimization using response surface methodology (RSM). The input parameters ‐ temperature, pressure, and residence time ‐ are analyzed to maximize the biodiesel yield, which is the response function. A face‐centered central composite design is utilized for experimental setup and statistical analysis of the results. Analysis of variance (ANOVA) is used for the optimization procedure. The statistical analysis highlights temperature as the most significant process parameter compared to residence time and pressure. This optimization process results in a maximum biodiesel yield of 99.6 % at an optimum temperature of 343.5 °C, 43.2 bar pressure, and 139.5 minutes of residence time. This study provides significant insights into non‐catalytic biodiesel production from algae oil, presenting an effective method for improving biodiesel yield.


  • Open Access

    Process Simulation and Optimization of Dimethyl Ether (DME) Synthesis Utilizing Highly Contaminated Natural Gas as Feedstock

    by Aymn Abdulrahman

    Natural gas with a high carbon dioxide (CO2) content presents significant operational and environmental challenges when used as a fuel. A high CO2 content lowers the calorific value of natural gas, reducing its fuel efficiency and increasing the risk of corrosion in pipelines and processing equipment. Consequently, such natural gas must be purified to reduce the CO2 content to acceptable levels before it can be effectively used as a fuel. Various technologies for natural gas purification are currently employed, primarily focusing on CO2 removal. This research explores an innovative approach where highly contaminated natural gas is utilized to synthesize hydrogen for subsequent methanol production. Methanol synthesis necessitates both hydrogen and CO2, integrating the use of by-products effectively in the production chain. Following the production of methanol, it is then converted into dimethyl ether (DME), a compound with considerable value as a clean fuel alternative due to its lower emissions when burnt. The open-source COCO simulator was used to model and simulate these processes, allowing for the creation of a detailed process flowsheet. The simulation covered four main stages: (1) purification of the natural gas to remove excess CO2, (2) production of hydrogen, (3) synthesis of methanol using the hydrogen and captured CO2, and (4) conversion of methanol to DME. This integrated approach mitigates the issues associated with high CO2 content in natural gas and leverages this component as a valuable feedstock, demonstrating a comprehensive use of all extracted compounds. The proposed process illustrates a promising route for utilizing highly contaminated natural gas, potentially transforming an environmental liability into valuable chemical commodities.


  • Open Access

    Optimization of viscosity of diamond and boron nitride based nanofluids for enhanced thermal management and pumping efficiency

    by Aymn Abdulrahman

    The present study investigates optimizing the viscosity of hybrid nanofluids composed of diamond and boron nitride in thermal oil for high-temperature heat transfer applications. Recognizing that higher viscosity equates to increased pumping costs, the study seeks to minimize this critical parameter to enhance the overall efficiency of thermal systems. Employing Response Surface Methodology (RSM) and a desirability function approach, explored the effect of temperature (25°C to 65°C), concentration (0.2 wt.% to 0.6 wt.%), and shear rate (1 to 1000 1/s) on the viscosity of nanofluids. The optimization process pinpointed conditions that yield the minimum viscosity with the highest desirability score, signifying the most advantageous operating scenario. The results showed an optimal balance at a higher temperature and mid-range concentration, culminating in a nanofluid demonstrating Newtonian behavior at low shear rates and shear-thinning attributes at elevated temperatures and shear rates. These findings explain the potential of tailored nanofluids to substantially cut pumping costs while maintaining excellent heat transfer properties, making them ideal candidates for advanced cooling systems in demanding thermal management settings.