Mohd Zamri Yusoff
Research Subjects
Mohd Zamri Yusoff has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Khai Ching Ng
University of Nottingham Malaysia
3 shared publications - Prem Gunnasegaran
Institute of Power Engineering, Putrajaya Campus, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, Kajang 43000, Malaysia
2 shared publications - A.M. Mohsen
Department of Air-conditioning and Refrigeration Techniques Engineering, University of Warith Al-Anbiyaa, Karbalaa- Baghdad Rd, 56001, Iraq
1 shared publication - Abdul Amir H. Kadhum
College of Medicine, University of Al-Ameed, Karbala, Iraq
1 shared publication - Ahmad Shah Hizam Md Yasir
Faculty of Resilience, Abu Dhabi, UAE
1 shared publication Amir Al-Falahi
Sheridan College, Davis Campus, 7899 McLaughlin Rd., Brampton, ON, L6Y 5H9, Canada
1 shared publication
Latest Publications
- Open Access
- 29 May 2023
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 15 (7) , 1-13
Application of Box- Behnken Design with Response Surface Methodology to Analyse Friction Characteristics for Corrugated Pipe via CFD
Due to the fact that modern technologies are getting smaller and more compact and are anticipated to perform better, there has been an increase in interest in heat transfer enhancement employing hybrid nanofluids in tubes and channels in recent years. This study seeks to establish an outward saw tooth corrugated wall model-based predictive friction characteristic for internal tube flow. Computational Fluid Dynamics (CFD) was used to simulate the model numerically. The response behaviour study was then conducted utilising the Design of Experiment (DOE) and the Response Surface Methodology (RSM). The established surrogate model has led to the consideration of RSM. In this study, the DOE was executed by utilising the Box-Behnken Design (BBD) method with two-level factorial by considering three parametric factors which are: (a) 10000 to 30000 axial Reynolds number, Re, (b) 1mm to 4mm wave amplitude, a, and (c) 5mm to 20mm wavelength, lw. The results showed that the expected response surface values are consistent with the CFD values and that the predictive model is therefore reliable. The R-squared (R2) value is 98.25%, indicating that the model can predict new observations. The wavelength and wave amplitude show significant factors influencing the friction factor which is -0.11235 and 0.14861 respectively and this is based on the normal plot of the effect from the regression model from RSM. These results provide data for estimating the geometric characteristics of tube corrugated wall.
- 29 May 2023
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 15 (7) , 1-13
Open AccessApplication of Box- Behnken Design with Response Surface Methodology to Analyse Friction Characteristics for Corrugated Pipe via CFD
Due to the fact that modern technologies are getting smaller and more compact and are anticipated to perform better, there has been an increase in interest in heat transfer enhancement employing hybrid nanofluids in tubes and channels in recent years. This study seeks to establish an outward saw tooth corrugated wall model-based predictive friction characteristic for internal tube flow. Computational Fluid Dynamics (CFD) was used to simulate the model numerically. The response behaviour study was then conducted utilising the Design of Experiment (DOE) and the Response Surface Methodology (RSM). The established surrogate model has led to the consideration of RSM. In this study, the DOE was executed by utilising the Box-Behnken Design (BBD) method with two-level factorial by considering three parametric factors which are: (a) 10000 to 30000 axial Reynolds number, Re, (b) 1mm to 4mm wave amplitude, a, and (c) 5mm to 20mm wavelength, lw. The results showed that the expected response surface values are consistent with the CFD values and that the predictive model is therefore reliable. The R-squared (R2) value is 98.25%, indicating that the model can predict new observations. The wavelength and wave amplitude show significant factors influencing the friction factor which is -0.11235 and 0.14861 respectively and this is based on the normal plot of the effect from the regression model from RSM. These results provide data for estimating the geometric characteristics of tube corrugated wall.
- Open Access
- 1 March 2021
- Vol. 7 (2) , 956-964
Two-Dimensional Numerical Study of the Transient Flow Conditions in Complete Shock Tunnel
- 1 March 2021
- Vol. 7 (2) , 956-964
Open AccessTwo-Dimensional Numerical Study of the Transient Flow Conditions in Complete Shock Tunnel
- 13 November 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2035 (1) , 040006
Heat transfer enhancement with nanofluids: A review on recent applications and experiments
Since the 1990’s, nanofluids have been one of the abundantly preferred newcomer technology invented to assist in electronic and heat transfer purposes. Their thermophysical properties and heat transfer performance make nanofluids highly demanded to overcome the current issues in the world. In this paper, a vast number of applications using nanofluids are reviewed as well as an epitome on the challenges in their respective areas. Additionally, recent research papers for specific applications of nanofluids in improving heat transfer efficiency were outlined while the experimental and theoretical methods were discussed in the articles and journals is summarized in this paper including the effects of thermal properties on the performance of nanofluids. In a nutshell, this review of experimental research extracted from most recent papers, published from 2011 to 2016, is a review on the latest updates in the nanofluids and heat transfer community to help anyone in concern of the topic and enough information to select nanofluids based on their needed applications.
- 13 November 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2035 (1) , 040006
Heat transfer enhancement with nanofluids: A review on recent applications and experiments
Since the 1990’s, nanofluids have been one of the abundantly preferred newcomer technology invented to assist in electronic and heat transfer purposes. Their thermophysical properties and heat transfer performance make nanofluids highly demanded to overcome the current issues in the world. In this paper, a vast number of applications using nanofluids are reviewed as well as an epitome on the challenges in their respective areas. Additionally, recent research papers for specific applications of nanofluids in improving heat transfer efficiency were outlined while the experimental and theoretical methods were discussed in the articles and journals is summarized in this paper including the effects of thermal properties on the performance of nanofluids. In a nutshell, this review of experimental research extracted from most recent papers, published from 2011 to 2016, is a review on the latest updates in the nanofluids and heat transfer community to help anyone in concern of the topic and enough information to select nanofluids based on their needed applications.
- 29 November 2014
- Published by Springer Nature
- p. 145-167
Numerical Investigation on the Nanofluid Flow and Heat Transfer in a Wavy Channel
- 29 November 2014
- Published by Springer Nature
- p. 145-167
Numerical Investigation on the Nanofluid Flow and Heat Transfer in a Wavy Channel
- 1 January 2007
- Published by Taylor & Francis in International Journal of Modelling and Simulation
- Vol. 27 (1) , 74-79
Numerical Simulation of 3D Transonic Flow in a Compressor Rotor
This paper presents a new computational fluid dynamics (CFD) code developed at Universiti Tenaga Nasional for the numerical computation of transonic laminar flow in a compressor rotor. The 3D computational code solves the unsteady Navier-Stokes equations (NSE) on unstructured hexahedral mesh by using second-order accurate central differencing scheme on both convective and diffusive terms. Artificial damping terms are added to control the stability of the numerical scheme, and the explicit multistage Runge-Kutta time-integration technique is performed to solve the unsteady NSE. This paper discusses the simulation of compressible flow field in an axial-flow compressor rotor using the newly developed CFD code. The predicted flow is then compared with the results obtained from the commercial code, CFX-5, as well as experimental data; good agreement is found.
- 1 January 2007
- Published by Taylor & Francis in International Journal of Modelling and Simulation
- Vol. 27 (1) , 74-79
Numerical Simulation of 3D Transonic Flow in a Compressor Rotor
This paper presents a new computational fluid dynamics (CFD) code developed at Universiti Tenaga Nasional for the numerical computation of transonic laminar flow in a compressor rotor. The 3D computational code solves the unsteady Navier-Stokes equations (NSE) on unstructured hexahedral mesh by using second-order accurate central differencing scheme on both convective and diffusive terms. Artificial damping terms are added to control the stability of the numerical scheme, and the explicit multistage Runge-Kutta time-integration technique is performed to solve the unsteady NSE. This paper discusses the simulation of compressible flow field in an axial-flow compressor rotor using the newly developed CFD code. The predicted flow is then compared with the results obtained from the commercial code, CFX-5, as well as experimental data; good agreement is found.
- 19 June 2006
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 53 (1) , 57-80
Higher‐order bounded differencing schemes for compressible and incompressible flows
In recent years, three higher‐order (HO) bounded differencing schemes, namely AVLSMART, CUBISTA and HOAB that were derived by adopting the normalized variable formulation (NVF), have been proposed. In this paper, a comparative study is performed on these schemes to assess their numerical accuracy, computational cost as well as iterative convergence property. All the schemes are formulated on the basis of a new dual‐formulation in order to facilitate their implementations on unstructured meshes. Based on the proposed dual‐formulation, the net effective blending factor (NEBF) of a high‐resolution (HR) scheme can now be measured and its relevance on the accuracy and computational cost of a HR scheme is revealed on three test problems: (1) advection of a scalar step‐profile; (2) 2D transonic flow past a circular arc bump; and (3) 3D lid‐driven incompressible cavity flow. Both density‐based and pressure‐based methods are used for the computations of compressible and incompressible flow, respectively. Computed results show that all the schemes produce solutions which are nearly as accurate as the third‐order QUICK scheme; however, without the unphysical oscillations which are commonly inherited from the HO linear differencing scheme. Generally, it is shown that at higher value of NEBF, a HR scheme can attain better accuracy at the expense of computational cost. Copyright © 2006 John Wiley & Sons, Ltd.
- 19 June 2006
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 53 (1) , 57-80
Higher‐order bounded differencing schemes for compressible and incompressible flows
In recent years, three higher‐order (HO) bounded differencing schemes, namely AVLSMART, CUBISTA and HOAB that were derived by adopting the normalized variable formulation (NVF), have been proposed. In this paper, a comparative study is performed on these schemes to assess their numerical accuracy, computational cost as well as iterative convergence property. All the schemes are formulated on the basis of a new dual‐formulation in order to facilitate their implementations on unstructured meshes. Based on the proposed dual‐formulation, the net effective blending factor (NEBF) of a high‐resolution (HR) scheme can now be measured and its relevance on the accuracy and computational cost of a HR scheme is revealed on three test problems: (1) advection of a scalar step‐profile; (2) 2D transonic flow past a circular arc bump; and (3) 3D lid‐driven incompressible cavity flow. Both density‐based and pressure‐based methods are used for the computations of compressible and incompressible flow, respectively. Computed results show that all the schemes produce solutions which are nearly as accurate as the third‐order QUICK scheme; however, without the unphysical oscillations which are commonly inherited from the HO linear differencing scheme. Generally, it is shown that at higher value of NEBF, a HR scheme can attain better accuracy at the expense of computational cost. Copyright © 2006 John Wiley & Sons, Ltd.