Mirko R. Bothien
Research Subjects
Research Interests
Mirko R. Bothien has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Giulio Ghirardo
Ansaldo Energia Switzerland, Römerstrasse 36, Baden 5401, Switzerland
3 shared publications - Alessandro Scarpato
Ansaldo Energia, Römerstrasse 36, Baden CH-5400, Switzerland
1 shared publication - Anders Wickstroem1 shared publication
Andrea Ciani
Ansaldo Energia Switzerland, Haselstrasse 18, Baden 5400, Switzerland
1 shared publication- Andrea Ciani
Ansaldo Energia Switzerland , Baden 5400, Switzerland
1 shared publication - Carlo Di Giovine
Ansaldo Energia Switzerland, Römerstrasse 36, Baden 5401, Switzerland
1 shared publication
Latest Publications
- Open Access
- 16 July 2021
- Published by ASME International
Protection and Identification of Thermoacoustic Azimuthal Modes
This paper first characterizes the acoustic field of two annular combustors by means of data from acoustic pressure sensors. In particular the amplitude, orientation, and nature of the acoustic field of azimuthal order \$n\$ is characterized. The dependence of the pulsation amplitude on the azimuthal location in the chamber is discussed, and a protection scheme making use of just
- 16 July 2021
- Published by ASME International
Open AccessProtection and Identification of Thermoacoustic Azimuthal Modes
This paper first characterizes the acoustic field of two annular combustors by means of data from acoustic pressure sensors. In particular the amplitude, orientation, and nature of the acoustic field of azimuthal order \$n\$ is characterized. The dependence of the pulsation amplitude on the azimuthal location in the chamber is discussed, and a protection scheme making use of just
- Open Access
- 16 July 2021
- Published by ASME International
Morphology and Dynamics of a Premixed Hydrogen-Methane-Air Jet Flame in Hot Vitiated Turbulent Crossflow
Over the last few decades strict regulations are being implemented to reduce pollutant emissions, mainly CO, NOx and unburned hydrocarbons. Simultaneously, the share of renewable energies in the market is constantly growing, boosted by these regulations and by stronger social and political conscience on environmental issues. In response to these phenomena strong research efforts
- 16 July 2021
- Published by ASME International
Open AccessMorphology and Dynamics of a Premixed Hydrogen-Methane-Air Jet Flame in Hot Vitiated Turbulent Crossflow
Over the last few decades strict regulations are being implemented to reduce pollutant emissions, mainly CO, NOx and unburned hydrocarbons. Simultaneously, the share of renewable energies in the market is constantly growing, boosted by these regulations and by stronger social and political conscience on environmental issues. In response to these phenomena strong research efforts
- Open Access
- 16 July 2021
- Published by ASME International
Sequential Combustion in Ansaldo Energia Gas Turbines: The Technology Enabler for CO2-Free, Highly Efficient Power Production Based on Hydrogen
Today gas turbines play an important role in power generation and in the light of increasing energy demand, their role is expected to grow alongside renewables. In addition, the volatility of renewables in generating and dispatching power entails a new focus on electricity security. This reinforces the importance of gas turbines in guaranteeing grid reliability by compensating for
- 16 July 2021
- Published by ASME International
Open AccessSequential Combustion in Ansaldo Energia Gas Turbines: The Technology Enabler for CO2-Free, Highly Efficient Power Production Based on Hydrogen
Today gas turbines play an important role in power generation and in the light of increasing energy demand, their role is expected to grow alongside renewables. In addition, the volatility of renewables in generating and dispatching power entails a new focus on electricity security. This reinforces the importance of gas turbines in guaranteeing grid reliability by compensating for
- 29 January 2020
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 142 (4)
Effect of Noise and Nonlinearities on Thermoacoustics of Can-Annular Combustors
Can-annular combustors consist of $N$ distinct cans set up symmetrically around the axis of the gas turbine. Each can is connected to the turbine inlet by means of a transition duct. At the turbine inlet a small gap between the neighbouring transition ducts allows acoustic communication between the cans. Thermoacoustic pulsations in the cans are driven by the respective flames, but also the communication between neighbouring cans through the gap plays a significant role. In this study we focus on the effect of the background noise intensity and of the nonlinear flame saturation. We predict how usually clusters of thermoacoustic modes are unstable in the linear regime and compete with each other in the nonlinear regime, each cluster consisting of axial, azimuthal and push-pull modes. Since linear theory cannot predict the nonlinear solution, stochastic simulations are run to study the nonlinear solution in a probabilistic sense. One outcome of these simulations are the various pulsation patterns, which are in principle different from one can to the next. We recover how a stronger flame response in one can can give rise to the phenomenon of mode localization, but also how the nonlinearity of the flame saturation and the competition between modes have an effect on the nonlinear mode shape. We finally predict the coherence and phase between cans on the linearized system subject to noise, and compare the predictions with engine measurements, in terms of spectra of amplitude in each can and coherence and phase, observing a good match.- 29 January 2020
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 142 (4)
Effect of Noise and Nonlinearities on Thermoacoustics of Can-Annular Combustors
Can-annular combustors consist of $N$ distinct cans set up symmetrically around the axis of the gas turbine. Each can is connected to the turbine inlet by means of a transition duct. At the turbine inlet a small gap between the neighbouring transition ducts allows acoustic communication between the cans. Thermoacoustic pulsations in the cans are driven by the respective flames, but also the communication between neighbouring cans through the gap plays a significant role. In this study we focus on the effect of the background noise intensity and of the nonlinear flame saturation. We predict how usually clusters of thermoacoustic modes are unstable in the linear regime and compete with each other in the nonlinear regime, each cluster consisting of axial, azimuthal and push-pull modes. Since linear theory cannot predict the nonlinear solution, stochastic simulations are run to study the nonlinear solution in a probabilistic sense. One outcome of these simulations are the various pulsation patterns, which are in principle different from one can to the next. We recover how a stronger flame response in one can can give rise to the phenomenon of mode localization, but also how the nonlinearity of the flame saturation and the competition between modes have an effect on the nonlinear mode shape. We finally predict the coherence and phase between cans on the linearized system subject to noise, and compare the predictions with engine measurements, in terms of spectra of amplitude in each can and coherence and phase, observing a good match.- 15 November 2019
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (12)
Toward Decarbonized Power Generation With Gas Turbines by Using Sequential Combustion for Burning Hydrogen
Excess energy generation from renewables can be conveniently stored as hydrogen for later use as a gas turbine fuel. Also, the strategy to sequestrate CO2 from natural gas (NG) will require gas turbines to run with hydrogen-based fuels. In such scenarios, high temperature low emission combustion of hydrogen is a key requirement for the future gas turbine market. Ansaldo Energia's gas turbines featuring sequential combustion have an intrinsic advantage when it comes to fuel flexibility and in particular hydrogen-based fuels. The sequential combustion system is composed of two complementary combustion stages in series: one premix stage followed by an auto-ignited second stage overcoming the limits of traditional premix combustion systems through a highly effective extra tuning parameter, i.e., the temperature between the first and the second stage. The standard constant pressure sequential combustion (CPSC) system as applied in the GT36 engine is tested, at high pressure, demonstrating that a modified operation concept allows stable combustion with no changes in combustor hardware for the whole range of NG and hydrogen blends. It is shown that in the range from 0% to 70% (vol.) hydrogen, stable combustion is achieved at full nominal exit temperature, i.e., without any derating and thus clearly outperforming other available conventional premixed combustors. Operation between 70% and 100% is possible as well and only requires a mild reduction of the combustor exit temperature. By proving the transferability of the single-can high pressure results to the engine, this paper demonstrates the practicality of operating the Ansaldo Energia GT36 H-Class gas turbine on fuels containing unprecedented concentrations of hydrogen while maintaining excellent performance and low emissions both in terms of NOx and CO2.
- 15 November 2019
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (12)
Toward Decarbonized Power Generation With Gas Turbines by Using Sequential Combustion for Burning Hydrogen
Excess energy generation from renewables can be conveniently stored as hydrogen for later use as a gas turbine fuel. Also, the strategy to sequestrate CO2 from natural gas (NG) will require gas turbines to run with hydrogen-based fuels. In such scenarios, high temperature low emission combustion of hydrogen is a key requirement for the future gas turbine market. Ansaldo Energia's gas turbines featuring sequential combustion have an intrinsic advantage when it comes to fuel flexibility and in particular hydrogen-based fuels. The sequential combustion system is composed of two complementary combustion stages in series: one premix stage followed by an auto-ignited second stage overcoming the limits of traditional premix combustion systems through a highly effective extra tuning parameter, i.e., the temperature between the first and the second stage. The standard constant pressure sequential combustion (CPSC) system as applied in the GT36 engine is tested, at high pressure, demonstrating that a modified operation concept allows stable combustion with no changes in combustor hardware for the whole range of NG and hydrogen blends. It is shown that in the range from 0% to 70% (vol.) hydrogen, stable combustion is achieved at full nominal exit temperature, i.e., without any derating and thus clearly outperforming other available conventional premixed combustors. Operation between 70% and 100% is possible as well and only requires a mild reduction of the combustor exit temperature. By proving the transferability of the single-can high pressure results to the engine, this paper demonstrates the practicality of operating the Ansaldo Energia GT36 H-Class gas turbine on fuels containing unprecedented concentrations of hydrogen while maintaining excellent performance and low emissions both in terms of NOx and CO2.
- 17 October 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (1)
Background-Oriented Schlieren of Fuel Jet Flapping Under Thermoacoustic Oscillations in a Sequential Combustor
This study deals with thermoacoustic instabilities in a generic sequential combustor. The thermoacoustic feedback involves two flames: the perfectly premixed swirled flame anchored in the first stage and the sequential flame established downstream of the mixing section, into which secondary fuel is injected in the vitiated stream from the first stage. It is shown that the large amplitude flapping of the secondary fuel jet in the mixing section plays a key role in the thermoacoustic feedback. This evidence is brought using high-speed background-oriented Schlieren (BOS). The fuel jet flapping is induced by the intense acoustic field at the fuel injection point. It has two consequences: first, it leads to the advection of equivalence ratio oscillations toward the sequential flame; second, it modulates the residence time of the ignitable mixture in the mixing section, which periodically triggers autoignition kernels developing upstream of the chamber. In addition, the BOS images are processed to quantify the flow velocity in the mixing section and these results are validated using particle image velocimetry (PIV). This study presents a new type of thermoacoustic feedback mechanism, which is peculiar to sequential combustion systems. In addition, it demonstrates how BOS can effectively complement other diagnostic techniques that are routinely used for the study of thermoacoustic instabilities.
- 17 October 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (1)
Background-Oriented Schlieren of Fuel Jet Flapping Under Thermoacoustic Oscillations in a Sequential Combustor
This study deals with thermoacoustic instabilities in a generic sequential combustor. The thermoacoustic feedback involves two flames: the perfectly premixed swirled flame anchored in the first stage and the sequential flame established downstream of the mixing section, into which secondary fuel is injected in the vitiated stream from the first stage. It is shown that the large amplitude flapping of the secondary fuel jet in the mixing section plays a key role in the thermoacoustic feedback. This evidence is brought using high-speed background-oriented Schlieren (BOS). The fuel jet flapping is induced by the intense acoustic field at the fuel injection point. It has two consequences: first, it leads to the advection of equivalence ratio oscillations toward the sequential flame; second, it modulates the residence time of the ignitable mixture in the mixing section, which periodically triggers autoignition kernels developing upstream of the chamber. In addition, the BOS images are processed to quantify the flow velocity in the mixing section and these results are validated using particle image velocimetry (PIV). This study presents a new type of thermoacoustic feedback mechanism, which is peculiar to sequential combustion systems. In addition, it demonstrates how BOS can effectively complement other diagnostic techniques that are routinely used for the study of thermoacoustic instabilities.
- 4 October 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (2)
Reconstruction and Analysis of the Acoustic Transfer Matrix of a Reheat Flame From Large-Eddy Simulations
Lean premix technology is widely spread in gas turbine combustion systems, allowing modern power plants to fulfill very stringent emission targets. These systems are, however, also prone to thermoacoustic instabilities, which can limit the engine operating window. The thermoacoustic analysis of a combustor is thus a key element in its development process. An important ingredient of this analysis is the characterization of the flame response to acoustic fluctuations, which is straightforward for lean-premixed flames that are propagation stabilized, since it can be measured atmospherically. Ansaldo Energia's GT26 and GT36 reheat combustion systems feature a unique technology where fuel is injected into a hot gas stream from a first combustor, which is propagation stabilized, and auto-ignites in a sequential combustion chamber. The present study deals with the flame response of mainly auto-ignition stabilized flames to acoustic and temperature fluctuations for which a computational fluid dynamics system identification (SI) approach is chosen. The current paper builds on recent works, which detail and validate a methodology to analyze the dynamic response of an auto-ignition flame to extract the flame transfer function (FTF) using unsteady large-Eddy simulations (LES). In these studies, the flame is assumed to behave as a single-input single-output (SISO) or a multi-input single-output (MISO) system. The analysis conducted in GT2015-42622 qualitatively highlights the important role of temperature and equivalence ratio fluctuations, but these effects are not separated from velocity fluctuations. Hence, this topic is addressed in GT2016-57699, where the flame is treated as a multiparameter system and compressible LES are conducted to extract the frequency-dependent FTF to describe the effects of axial velocity, temperature, equivalence ratio, and pressure fluctuations on the flame response. For lean-premixed flames, a common approach followed in the literature assumes that the acoustic pressure is constant across the flame and that the flame dynamics are governed by the response to velocity perturbations only, i.e., the FTF. However, this is not necessarily the case for reheat flames that are mainly auto-ignition stabilized. Therefore, in this paper, we present the full 2 × 2 transfer matrix of a predominantly auto-ignition stabilized flame, and hence, describe the flame as a multi-input multi-output (MIMO) system. In addition to this, it is highlighted that in the presence of temperature fluctuations, the 2 × 2 matrix can be extended to a 3 × 3 matrix relating the primitive acoustic variables as well as the temperature fluctuations across the flame. It is shown that only taking the FTF is insufficient to fully describe the dynamic behavior of reheat flames.
- 4 October 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (2)
Reconstruction and Analysis of the Acoustic Transfer Matrix of a Reheat Flame From Large-Eddy Simulations
Lean premix technology is widely spread in gas turbine combustion systems, allowing modern power plants to fulfill very stringent emission targets. These systems are, however, also prone to thermoacoustic instabilities, which can limit the engine operating window. The thermoacoustic analysis of a combustor is thus a key element in its development process. An important ingredient of this analysis is the characterization of the flame response to acoustic fluctuations, which is straightforward for lean-premixed flames that are propagation stabilized, since it can be measured atmospherically. Ansaldo Energia's GT26 and GT36 reheat combustion systems feature a unique technology where fuel is injected into a hot gas stream from a first combustor, which is propagation stabilized, and auto-ignites in a sequential combustion chamber. The present study deals with the flame response of mainly auto-ignition stabilized flames to acoustic and temperature fluctuations for which a computational fluid dynamics system identification (SI) approach is chosen. The current paper builds on recent works, which detail and validate a methodology to analyze the dynamic response of an auto-ignition flame to extract the flame transfer function (FTF) using unsteady large-Eddy simulations (LES). In these studies, the flame is assumed to behave as a single-input single-output (SISO) or a multi-input single-output (MISO) system. The analysis conducted in GT2015-42622 qualitatively highlights the important role of temperature and equivalence ratio fluctuations, but these effects are not separated from velocity fluctuations. Hence, this topic is addressed in GT2016-57699, where the flame is treated as a multiparameter system and compressible LES are conducted to extract the frequency-dependent FTF to describe the effects of axial velocity, temperature, equivalence ratio, and pressure fluctuations on the flame response. For lean-premixed flames, a common approach followed in the literature assumes that the acoustic pressure is constant across the flame and that the flame dynamics are governed by the response to velocity perturbations only, i.e., the FTF. However, this is not necessarily the case for reheat flames that are mainly auto-ignition stabilized. Therefore, in this paper, we present the full 2 × 2 transfer matrix of a predominantly auto-ignition stabilized flame, and hence, describe the flame as a multi-input multi-output (MIMO) system. In addition to this, it is highlighted that in the presence of temperature fluctuations, the 2 × 2 matrix can be extended to a 3 × 3 matrix relating the primitive acoustic variables as well as the temperature fluctuations across the flame. It is shown that only taking the FTF is insufficient to fully describe the dynamic behavior of reheat flames.
- 14 September 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (1)
Thermoacoustics of Can-Annular Combustors
Can-annular combustors consist of a set of independent cans, connected on the upstream side to the combustor plenum and on the downstream side to the turbine inlet, where a transition duct links the round geometry of each can with the annular segment of the turbine inlet. Each transition duct is open on the sides toward the adjacent transition ducts, so that neighboring cans are acoustically connected through a so-called cross-talk open area. This theoretical, numerical, and experimental work discusses the effect that this communication has on the thermoacoustic frequencies of the combustor. We show how this communication gives rise to axial and azimuthal modes, and that these correspond to particularly synchronized states of axial thermoacoustic oscillations in each individual can. We show that these combustors typically show clusters of thermoacoustic modes with very close frequencies and that a slight loss of rotational symmetry, e.g., a different acoustic response of certain cans, can lead to mode localization. We corroborate the predictions of azimuthal modes, clusters of eigenmodes, and mode localization with experimental evidence.
- 14 September 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (1)
Thermoacoustics of Can-Annular Combustors
Can-annular combustors consist of a set of independent cans, connected on the upstream side to the combustor plenum and on the downstream side to the turbine inlet, where a transition duct links the round geometry of each can with the annular segment of the turbine inlet. Each transition duct is open on the sides toward the adjacent transition ducts, so that neighboring cans are acoustically connected through a so-called cross-talk open area. This theoretical, numerical, and experimental work discusses the effect that this communication has on the thermoacoustic frequencies of the combustor. We show how this communication gives rise to axial and azimuthal modes, and that these correspond to particularly synchronized states of axial thermoacoustic oscillations in each individual can. We show that these combustors typically show clusters of thermoacoustic modes with very close frequencies and that a slight loss of rotational symmetry, e.g., a different acoustic response of certain cans, can lead to mode localization. We corroborate the predictions of azimuthal modes, clusters of eigenmodes, and mode localization with experimental evidence.