Arun Kumar Srirangan
Research Subjects
Arun Kumar Srirangan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Paulraj Sathiya
Department of Production Engineering, National Institute of Technology, Tiruchirappalli, India
4 shared publications - C B Maheswaran
School of Mechanical Engineering, SASTRA Deemed to be University Thanjavur-613401, Tamilnadu, Tel: +91-9943989906, India
2 shared publications Sathiya Paulraj
2 shared publicationsSeshadri Sridharan
Sastra University
2 shared publicationsA Anuj
School of Mechanical Engineering, SASTRA Deemed to be University Thanjavur-613401, Tamilnadu, Tel: +91-9943989906, India
1 shared publicationArunkumar Ganesan
Sastra University
1 shared publication
Latest Publications
- 22 September 2020
- Published by Springer Nature
- p. 169-175
Experimental Investigation on Machining Properties Carbon Fibre-Reinforced Epoxy Composites with the Addition of Nano SiC
- 22 September 2020
- Published by Springer Nature
- p. 169-175
Experimental Investigation on Machining Properties Carbon Fibre-Reinforced Epoxy Composites with the Addition of Nano SiC
- 22 September 2020
- Published by Springer Nature
- p. 177-185
Process Parameter Optimization Using TOPSIS for Electric Discharge Machining of Incoloy 800HT
- 22 September 2020
- Published by Springer Nature
- p. 177-185
Process Parameter Optimization Using TOPSIS for Electric Discharge Machining of Incoloy 800HT
- Open Access
- 30 July 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 390 (1) , 012035
Mechanical and Microstructural Characterization of Diffusion Bonded Super Martensitic Stainless Steel Joints
Super Martensitic Stainless Steels (SMSS) are low carbon high chromium steels. They possess high strength and resistant to corrosion for fluids like CO2 and H2S. Diffusion bonding is a welding technique capable of joining similar or dissimilar metals wherein the solid materials intersperse themselves with time. In this present study, the SMSS specimens were bonded at temperatures ranging from 800-10500C in the non-inert atmosphere and their microstructure and mechanical properties were analyzed.
- 30 July 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 390 (1) , 012035
Open AccessMechanical and Microstructural Characterization of Diffusion Bonded Super Martensitic Stainless Steel Joints
Super Martensitic Stainless Steels (SMSS) are low carbon high chromium steels. They possess high strength and resistant to corrosion for fluids like CO2 and H2S. Diffusion bonding is a welding technique capable of joining similar or dissimilar metals wherein the solid materials intersperse themselves with time. In this present study, the SMSS specimens were bonded at temperatures ranging from 800-10500C in the non-inert atmosphere and their microstructure and mechanical properties were analyzed.
- 1 January 2018
- Published by Elsevier in Materials Today: Proceedings
- Vol. 5 (6) , 14237-14243
Optimisation of laser welding parameters for incoloy 800HT joints using Grey-fuzzy Taguchi approach
- 1 January 2018
- Published by Elsevier in Materials Today: Proceedings
- Vol. 5 (6) , 14237-14243
Optimisation of laser welding parameters for incoloy 800HT joints using Grey-fuzzy Taguchi approach
- Open Access
- 26 September 2017
- Published by Walter de Gruyter GmbH in Archives of Metallurgy and Materials
- Vol. 62 (3) , 1673-1679
Effects of Heat Input on the Mechanical and Metallurgical Characteristics of Tig Welded Incoloy 800Ht Joints
This study focuses on the effect of heat input on the quality characteristics of tungsten inert arc gas welded incoloy 800HT joints using inconel-82 filler wire. Butt welding was done on specimens with four different heat inputs by varying the process parameters like welding current and speed. The result indicated that higher heat input levels has led to the formation of coarser grain structure, reduced mechanical properties and sensitization issues on the weldments. The formation of titanium nitrides provided resistance to fracture and increased the tensile strength of the joints at high temperatures. Further aging was done on the welded sample at a temperature of 750°C for 500 hours and the metallographic result showed formation of carbides along the grain boundaries in a chain of discrete and globular form which increased the hardness of the material. The formation of spinel NiCr2O4provided oxidation resistance to the material during elevated temperature service.
- 26 September 2017
- Published by Walter de Gruyter GmbH in Archives of Metallurgy and Materials
- Vol. 62 (3) , 1673-1679
Open AccessEffects of Heat Input on the Mechanical and Metallurgical Characteristics of Tig Welded Incoloy 800Ht Joints
This study focuses on the effect of heat input on the quality characteristics of tungsten inert arc gas welded incoloy 800HT joints using inconel-82 filler wire. Butt welding was done on specimens with four different heat inputs by varying the process parameters like welding current and speed. The result indicated that higher heat input levels has led to the formation of coarser grain structure, reduced mechanical properties and sensitization issues on the weldments. The formation of titanium nitrides provided resistance to fracture and increased the tensile strength of the joints at high temperatures. Further aging was done on the welded sample at a temperature of 750°C for 500 hours and the metallographic result showed formation of carbides along the grain boundaries in a chain of discrete and globular form which increased the hardness of the material. The formation of spinel NiCr2O4provided oxidation resistance to the material during elevated temperature service.
- 1 January 2017
- Published by Elsevier in Materials Today: Proceedings
- Vol. 4 (2) , 2031-2039
Optimisation of Process Parameters for Gas Tungsten Arc Welding of Incoloy 800HT Using TOPSIS
- 1 January 2017
- Published by Elsevier in Materials Today: Proceedings
- Vol. 4 (2) , 2031-2039
Optimisation of Process Parameters for Gas Tungsten Arc Welding of Incoloy 800HT Using TOPSIS
- Open Access
- 1 September 2016
- Published by Walter de Gruyter GmbH in Advances in Materials Science
- Vol. 16 (3) , 26-37
A Study on the Effect of Different Activating Flux on A-TIG Welding Process of Incoloy 800H
This study investigates the effect of different activating flux such as V2O5, TiO2, MoO3, Cr2O3, and Al2O3 on A-TIG welding process of Incoloy 800H. The influence of the flux on the depth of penetration and on mechanical and metallurgical characteristics of the weld were studied and compared with autogeneous TIG welds which were welded with the same process parameters and conditions. The use of TiO2 flux gave full depth of penetration and the use of V2O5, Cr2O3 flux gave increased penetration as compared to autogeneous TIG welds while the use of Al2O3 and MoO3 led to the detoriation of the effect.
- 1 September 2016
- Published by Walter de Gruyter GmbH in Advances in Materials Science
- Vol. 16 (3) , 26-37
Open AccessA Study on the Effect of Different Activating Flux on A-TIG Welding Process of Incoloy 800H
This study investigates the effect of different activating flux such as V2O5, TiO2, MoO3, Cr2O3, and Al2O3 on A-TIG welding process of Incoloy 800H. The influence of the flux on the depth of penetration and on mechanical and metallurgical characteristics of the weld were studied and compared with autogeneous TIG welds which were welded with the same process parameters and conditions. The use of TiO2 flux gave full depth of penetration and the use of V2O5, Cr2O3 flux gave increased penetration as compared to autogeneous TIG welds while the use of Al2O3 and MoO3 led to the detoriation of the effect.
- Open Access
- 1 June 2016
- Published by Elsevier in Engineering Science and Technology, an International Journal
- Vol. 19 (2) , 811-817
Multi-response optimization of process parameters for TIG welding of Incoloy 800HT by Taguchi grey relational analysis
- 1 June 2016
- Published by Elsevier in Engineering Science and Technology, an International Journal
- Vol. 19 (2) , 811-817
Open AccessMulti-response optimization of process parameters for TIG welding of Incoloy 800HT by Taguchi grey relational analysis
- 2 May 2016
- Published by Springer Nature in Journal of Materials Research
- Vol. 31 (14) , 2173-2185
Metallurgical characterizations and mechanical properties on friction welding of Incoloy 800H joints
- 2 May 2016
- Published by Springer Nature in Journal of Materials Research
- Vol. 31 (14) , 2173-2185
Metallurgical characterizations and mechanical properties on friction welding of Incoloy 800H joints
- Open Access
- 1 January 2016
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 10 (30) , 115-126
MODELLING AND CHARACTERIZATION OF LASER WELDED INCOLOY 800 HT JOINTS
- 1 January 2016
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 10 (30) , 115-126
Open AccessMODELLING AND CHARACTERIZATION OF LASER WELDED INCOLOY 800 HT JOINTS