Anna V. Vutolkina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anna V. Vutolkina has a total of 76 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandr Pavlovich Glotov
Gubkin Russian State University of Oil and Gas (National Research University), Moscow, Russia
16 shared publications - Anton Lvovich Maximov
A.V. Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences, Moscow, Russian Federation
9 shared publications - Aleksey A. Pimerzin
National University of Oil and Gas “Gubkin University”, Moscow, Russia
8 shared publications - Eduard A. Karakhanov
Lomonosov Moscow State University
6 shared publications - Gleb O. Zasypalov
National University of Oil and Gas “Gubkin University”, Moscow, Russia
6 shared publications - Argam V. Akopyan
Lomonosov Moscow State University, Moscow, Russia
5 shared publications
Latest Publications
- Open Access
- 1 September 2026
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 66 (9) , 1079-1093
Effect of Precursor Type for Dispersed Mo-Sulfide Catalysts on Eugenol Hydroconversion Pathways under In Situ Hydrogen Generation Conditions
The catalytic properties of dispersed unsupported Mo sulfide catalysts in eugenol hydrotransformation were studied under the in situ hydrogen generation conditions provided by steam conversion of carbon monoxide. Active component particles were formed directly in the reaction medium by high-temperature decomposition–sulfidization of oil- or water-soluble precursors in the presence of elemental sulfur (sulfiding agent). Experiments under typical conditions ( Т = 340°C, р (СО) =5 MPa (at 25°C), t = 6 h, Mo : eugenol = 1 : 65, ω(Н 2 О) = 20 wt %, ω(S) = 1.3 wt %) revealed differences in the catalytic properties of the system depending on the type of precursor, kind of promoter, and Мо : Ni(Co) molar ratio. The influence of the sulfur content on the feed conversion and product distribution for the two types of systems was determined. The type of precursor and specific features of its decomposition in the presence of water and in the reducing atmosphere of carbon monoxide determine the contribution of eugenol transformation pathways. When using the oil-soluble salts, the reaction occurs along the demethoxylation pathway and yields 4-propylphenol (70%), whereas with the water-soluble analogs the prevalent pathway is demethylation to propylpyrocatechol, followed by its hydrogenation/dehydroxylation to hydrocarbons, whereas the 4-propylphenol yield does not exceed 45% for the monometallic Mo catalyst. For the Ni–Mo catalysts prepared from the water-soluble precursors at Ni : Mo = 1 : 1, the yield of hydrocarbons at the molar ratio Mo : eugenol = 1 : 7 reaches 75% (including 63% propylcyclohexane), whereas an increase in the relative content of molybdenum leads to a decrease in the selectivity to 20–25%.
- 1 September 2026
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 66 (9) , 1079-1093
Open AccessEffect of Precursor Type for Dispersed Mo-Sulfide Catalysts on Eugenol Hydroconversion Pathways under In Situ Hydrogen Generation Conditions
The catalytic properties of dispersed unsupported Mo sulfide catalysts in eugenol hydrotransformation were studied under the in situ hydrogen generation conditions provided by steam conversion of carbon monoxide. Active component particles were formed directly in the reaction medium by high-temperature decomposition–sulfidization of oil- or water-soluble precursors in the presence of elemental sulfur (sulfiding agent). Experiments under typical conditions ( Т = 340°C, р (СО) =5 MPa (at 25°C), t = 6 h, Mo : eugenol = 1 : 65, ω(Н 2 О) = 20 wt %, ω(S) = 1.3 wt %) revealed differences in the catalytic properties of the system depending on the type of precursor, kind of promoter, and Мо : Ni(Co) molar ratio. The influence of the sulfur content on the feed conversion and product distribution for the two types of systems was determined. The type of precursor and specific features of its decomposition in the presence of water and in the reducing atmosphere of carbon monoxide determine the contribution of eugenol transformation pathways. When using the oil-soluble salts, the reaction occurs along the demethoxylation pathway and yields 4-propylphenol (70%), whereas with the water-soluble analogs the prevalent pathway is demethylation to propylpyrocatechol, followed by its hydrogenation/dehydroxylation to hydrocarbons, whereas the 4-propylphenol yield does not exceed 45% for the monometallic Mo catalyst. For the Ni–Mo catalysts prepared from the water-soluble precursors at Ni : Mo = 1 : 1, the yield of hydrocarbons at the molar ratio Mo : eugenol = 1 : 7 reaches 75% (including 63% propylcyclohexane), whereas an increase in the relative content of molybdenum leads to a decrease in the selectivity to 20–25%.
- 1 September 2026
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 66 (9) , 1094-1105
Hydrogenation of Monoaromatic and Diaromatic Compounds over Pt-Pd Catalysts Supported on Aluminosilicate Halloysite Nanotubes
This study is the first to investigate Pt-Pd catalysts supported on untreated and dealuminated halloysite nanotubes (HNT and HNT-t, respectively) in the hydrogenation of diaromatic (naphthalene) and monoaromatic (benzene, toluene, ethylbenzene) hydrocarbons. Pre-dealumination of halloysite with a concentrated hydrochloric acid solution increases the specific surface area (from 65 to 154 m2/g), acidity (from 177 to 317 μmol NH3/g), and the Si/Al ratio (from 0.90 to 1.35). The deposition of active species by incipient wetness co-impregnation yields Pt and Pd loadings of 0.19 and 0.35 wt %. Pt-Pd/HNT-t exhibited high dispersion of active species (mean particle diameter 2.8 nm). In naphthalene hydrogenation (200°C, 5 MPa H2, support/active-species molar ratio 400), this catalyst achieved near-complete conversion and decalin selectivity up to 98%. In contrast, the catalyst supported on untreated nanotubes yielded tetralin as the main product (up to 84% selectivity). The synthesized aluminosilicate-nanotube-supported catalysts were compared with a commercial reference catalyst in terms of conversion and selectivity.
- 1 September 2026
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 66 (9) , 1094-1105
Hydrogenation of Monoaromatic and Diaromatic Compounds over Pt-Pd Catalysts Supported on Aluminosilicate Halloysite Nanotubes
This study is the first to investigate Pt-Pd catalysts supported on untreated and dealuminated halloysite nanotubes (HNT and HNT-t, respectively) in the hydrogenation of diaromatic (naphthalene) and monoaromatic (benzene, toluene, ethylbenzene) hydrocarbons. Pre-dealumination of halloysite with a concentrated hydrochloric acid solution increases the specific surface area (from 65 to 154 m2/g), acidity (from 177 to 317 μmol NH3/g), and the Si/Al ratio (from 0.90 to 1.35). The deposition of active species by incipient wetness co-impregnation yields Pt and Pd loadings of 0.19 and 0.35 wt %. Pt-Pd/HNT-t exhibited high dispersion of active species (mean particle diameter 2.8 nm). In naphthalene hydrogenation (200°C, 5 MPa H2, support/active-species molar ratio 400), this catalyst achieved near-complete conversion and decalin selectivity up to 98%. In contrast, the catalyst supported on untreated nanotubes yielded tetralin as the main product (up to 84% selectivity). The synthesized aluminosilicate-nanotube-supported catalysts were compared with a commercial reference catalyst in terms of conversion and selectivity.
- 1 May 2026
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 66 (5) , 576-584
Effects of the Zeolite SiO2/Al2O3 Ratio on the Physicochemical Properties and Catalytic Performance of NiMoS Catalysts in Triglyceride Hydroprocessing
A series of NiMo-based sulfide catalysts supported on USY–Al2O3 with varying SiO2/Al2O3 molar ratios were synthesized via incipient wetness impregnation. The raw materials, supports, and final catalysts were comprehensively characterized using low-temperature nitrogen adsorption, energy-dispersive X-ray fluorescence (ED-XRF), Fourier-transform infrared spectroscopy of adsorbed pyridine (FTIR-Py), and transmission electron microscopy (TEM). The catalytic performance of the synthesized samples was evaluated in the hydrotreating and hydroisomerization of a triglyceride feedstock. The tests were carried out in a fixed-bed flow-through reactor at 280–340°C and 4 MPa, with a feed liquid hourly space velocity (LHSV) of 1.0–2.0 h–1 and a H2/feedstock volumetric ratio of 600 nL/L. The incorporation of zeolite did not impair hydrodeoxygenation performance, while the yield of isomeric products increased with rising SiO2/Al2O3 ratio in the USY zeolite.
- 1 May 2026
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 66 (5) , 576-584
Effects of the Zeolite SiO2/Al2O3 Ratio on the Physicochemical Properties and Catalytic Performance of NiMoS Catalysts in Triglyceride Hydroprocessing
A series of NiMo-based sulfide catalysts supported on USY–Al2O3 with varying SiO2/Al2O3 molar ratios were synthesized via incipient wetness impregnation. The raw materials, supports, and final catalysts were comprehensively characterized using low-temperature nitrogen adsorption, energy-dispersive X-ray fluorescence (ED-XRF), Fourier-transform infrared spectroscopy of adsorbed pyridine (FTIR-Py), and transmission electron microscopy (TEM). The catalytic performance of the synthesized samples was evaluated in the hydrotreating and hydroisomerization of a triglyceride feedstock. The tests were carried out in a fixed-bed flow-through reactor at 280–340°C and 4 MPa, with a feed liquid hourly space velocity (LHSV) of 1.0–2.0 h–1 and a H2/feedstock volumetric ratio of 600 nL/L. The incorporation of zeolite did not impair hydrodeoxygenation performance, while the yield of isomeric products increased with rising SiO2/Al2O3 ratio in the USY zeolite.
- 30 January 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 405
Solvent-free room-temperature oxidative desulfurization enabled by superhydrophobic Mo/SBA-15 catalysts
- 30 January 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 405
Solvent-free room-temperature oxidative desulfurization enabled by superhydrophobic Mo/SBA-15 catalysts
- 1 August 2025
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 65 (8) , 951-959
Gas-Phase Reactions in Hydroupgrading of Model Petroleum Feed over Dispersed Ni–Mo Sulfide Catalysts under Water Gas Shift Reaction Conditions
The composition of gaseous products formed during hydroupgrading of a model feedstock containing benzothiophene and 2-methylnaphthalene over unsupported (dispersed) Ni–Mo sulfide catalysts under the water gas shift reaction conditions (reaction of carbon monoxide with water) was studied. The influence of the reaction conditions (Т = 340–400°C, Р = 5 MPa (at 25°C), t = 4–10 h) on the conversion of individual feed components and composition of gaseous products was examined. The process conditions ensure in situ hydrogen generation (Н2 content 25–30 vol %) and formation of hydrocarbon gases by methanation and hydrogenation of CO and СО2 (СН4 content up to 50 vol %, content of С2–С4 hydrocarbons 23–30 vol %). For the model feedstock with equimolar component ratio, at 360–380°C, CO pressure of 5 MPa (at 25°C), and water content of 10 wt %, the 2-methylnaphthalene conversion in 8–10 h does not exceed 30–34%, whereas for the benzothiophene it reaches 100% already in 4 h.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 65 (8) , 951-959
Gas-Phase Reactions in Hydroupgrading of Model Petroleum Feed over Dispersed Ni–Mo Sulfide Catalysts under Water Gas Shift Reaction Conditions
The composition of gaseous products formed during hydroupgrading of a model feedstock containing benzothiophene and 2-methylnaphthalene over unsupported (dispersed) Ni–Mo sulfide catalysts under the water gas shift reaction conditions (reaction of carbon monoxide with water) was studied. The influence of the reaction conditions (Т = 340–400°C, Р = 5 MPa (at 25°C), t = 4–10 h) on the conversion of individual feed components and composition of gaseous products was examined. The process conditions ensure in situ hydrogen generation (Н2 content 25–30 vol %) and formation of hydrocarbon gases by methanation and hydrogenation of CO and СО2 (СН4 content up to 50 vol %, content of С2–С4 hydrocarbons 23–30 vol %). For the model feedstock with equimolar component ratio, at 360–380°C, CO pressure of 5 MPa (at 25°C), and water content of 10 wt %, the 2-methylnaphthalene conversion in 8–10 h does not exceed 30–34%, whereas for the benzothiophene it reaches 100% already in 4 h.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 65 (8) , 933-942
Hydrotransformation of Dibenzothiophene over Dispersed and MCM-41-Supported Ni–Mo Sulfide Catalysts
The study compares the catalytic performance of two Ni–Mo sulfide systems: a dispersed (unsupported) catalyst and one supported on MCM–41 ordered mesoporous silica. The catalytic performance was evaluated in the hydrotransformation of dibenzothiophene (DBT) using a batch reactor at temperatures of 340–380°C and a hydrogen pressure of 5 MPa for 0.5–10 h. For each catalyst, the apparent reaction rate constant and activation energy were calculated, and the effects of temperature and reaction time on product distribution and selectivity towards the hydrogenation reaction route and direct hydrodesulfurization pathway were determined. The primary products of DBT conversion were biphenyl and cyclohexylbenzene. The dispersed catalyst demonstrated a higher activity for the DBT conversion than its supported counterpart. Furthermore, for the dispersed catalyst, with increasing temperature and reaction time, the dibenzothiophene hydrogenation pathway becomes dominant over the hydrodesulfurization reaction route. In contrast, the MCM-41-supported sample maintained a consistent balance between the two pathways under all tested conditions.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 65 (8) , 933-942
Hydrotransformation of Dibenzothiophene over Dispersed and MCM-41-Supported Ni–Mo Sulfide Catalysts
The study compares the catalytic performance of two Ni–Mo sulfide systems: a dispersed (unsupported) catalyst and one supported on MCM–41 ordered mesoporous silica. The catalytic performance was evaluated in the hydrotransformation of dibenzothiophene (DBT) using a batch reactor at temperatures of 340–380°C and a hydrogen pressure of 5 MPa for 0.5–10 h. For each catalyst, the apparent reaction rate constant and activation energy were calculated, and the effects of temperature and reaction time on product distribution and selectivity towards the hydrogenation reaction route and direct hydrodesulfurization pathway were determined. The primary products of DBT conversion were biphenyl and cyclohexylbenzene. The dispersed catalyst demonstrated a higher activity for the DBT conversion than its supported counterpart. Furthermore, for the dispersed catalyst, with increasing temperature and reaction time, the dibenzothiophene hydrogenation pathway becomes dominant over the hydrodesulfurization reaction route. In contrast, the MCM-41-supported sample maintained a consistent balance between the two pathways under all tested conditions.