Ashkan Saradar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ashkan Saradar has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Mohtasham Moein
Department of Civil Engineering, Allameh Mohaddes Nouri University, Nour, Iran
17 shared publications - Moses Karakouzian
School of Civil and Environmental Engineering and Construction, University of Nevada, Las Vegas, NV 89154, USA
11 shared publications Behzad Tahmouresi
5 shared publications- Komeil Rahmati
Department of Civil Engineering, University of Guilan, Rasht, Iran
5 shared publications Moses Karakouzian
Department of Civil and Environmental Engineering and Construction, University of Nevada, Las Vegas, NV, USA
5 shared publications- Komeil Rahmati
Department of Civil Engineering, University of Guilan, Rasht 4199613776, Iran
4 shared publications
Latest Publications
- 13 May 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11  (6) , 296
Synergistic effects on the geomechanical properties and microstructural mechanisms of nano-CaCO3 stabilized clay reinforced with recycled polypropylene fibers
- 13 May 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11  (6) , 296
Synergistic effects on the geomechanical properties and microstructural mechanisms of nano-CaCO3 stabilized clay reinforced with recycled polypropylene fibers
- Open Access
- 16 January 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
Characterisation of magnetic properties in cementitious composites for advanced wireless power transfer systems using magnetic sand, magnetite powder, GGBFS, and silica fume
- 16 January 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
Open AccessCharacterisation of magnetic properties in cementitious composites for advanced wireless power transfer systems using magnetic sand, magnetite powder, GGBFS, and silica fume
- Open Access
- 5 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15  (9) , 5133
Investigation of Mechanical and Fresh Properties of Ultra-High-Performance Concrete Incorporating Second-Generation Superplasticizers
Ultra-high-performance concrete (UHPC) has been following economic and environmental trends for the past two decades. Limited research has been conducted on the significance of superplasticizers in UHPC products, despite the high costs they entail for projects. The current study assesses UHPC based on rheological properties and mechanical characteristics considering different factors. In this study, the effects of different levels of superplasticizer derived from sulfonated naphthalene formaldehyde (SNF: 0.7%, 0.8%, and 0.9%), silica fume (SF: 15%, 20%, and 25%), and the water-to-binder ratio (w/b: 0.18, 0.20, and 0.22) were examined. Fresh tests such as slump flow, Vicat needle, and squeezing, as well as hardened tests like compressive strength, flexural strength, and electrical resistivity, were conducted. In the analysis, an artificial neural network (ANN) model and a fuzzy logic (FL) model were employed to forecast compressive strength results at 7 and 28 days. The results indicated that a higher SF dosage reduced slump flow and set time, whereas the opposite was observed for SNF and the w/b ratio. Three distinct behaviors were identified in the squeezing flow test findings: (1) specific elastic behavior and low plasticity, (2) extensive plastic behavior and significant dilatancy, and (3) heightened responsiveness to compressive flow rate and material ratio. SNF demonstrated promise in enhancing compressive, flexural, and electrical strength. The prediction models suggested that the FL (error range 3.18–4.36%) and ANN (0.74–1.03%) models performed well in predicting compressive strength at 7 and 28 days. The encouraging findings from this study set the stage for further sustainable and cost-effective construction methods.
- 5 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15  (9) , 5133
Open AccessInvestigation of Mechanical and Fresh Properties of Ultra-High-Performance Concrete Incorporating Second-Generation Superplasticizers
Ultra-high-performance concrete (UHPC) has been following economic and environmental trends for the past two decades. Limited research has been conducted on the significance of superplasticizers in UHPC products, despite the high costs they entail for projects. The current study assesses UHPC based on rheological properties and mechanical characteristics considering different factors. In this study, the effects of different levels of superplasticizer derived from sulfonated naphthalene formaldehyde (SNF: 0.7%, 0.8%, and 0.9%), silica fume (SF: 15%, 20%, and 25%), and the water-to-binder ratio (w/b: 0.18, 0.20, and 0.22) were examined. Fresh tests such as slump flow, Vicat needle, and squeezing, as well as hardened tests like compressive strength, flexural strength, and electrical resistivity, were conducted. In the analysis, an artificial neural network (ANN) model and a fuzzy logic (FL) model were employed to forecast compressive strength results at 7 and 28 days. The results indicated that a higher SF dosage reduced slump flow and set time, whereas the opposite was observed for SNF and the w/b ratio. Three distinct behaviors were identified in the squeezing flow test findings: (1) specific elastic behavior and low plasticity, (2) extensive plastic behavior and significant dilatancy, and (3) heightened responsiveness to compressive flow rate and material ratio. SNF demonstrated promise in enhancing compressive, flexural, and electrical strength. The prediction models suggested that the FL (error range 3.18–4.36%) and ANN (0.74–1.03%) models performed well in predicting compressive strength at 7 and 28 days. The encouraging findings from this study set the stage for further sustainable and cost-effective construction methods.
- Open Access
Employing Neural Networks, Fuzzy Logic, and Weibull Analysis for the Evaluation of Recycled Brick Powder in Concrete Compositions
Using construction and demolition (C&D) waste in concrete production is a promising step toward environmental resilience amid the construction industry’s ecological footprint. The extensive history of using bricks in the construction of buildings has resulted in a considerable amount of waste associated with this commonly used material. This study aimed to assess the quality of concrete by examining the effect of replacing cement with varying percentages of recycled brick powder (RBP—0% to 50%). The primary objectives include evaluating the mechanical properties of concrete and establishing the feasibility of using RBP as a partial cement substitute. The investigation of target concrete can be divided into two phases: (i) laboratory investigation, and (ii) numerical investigation. In the laboratory phase, the performance of concrete with RBP was assessed under short-term dynamic and various static loads. The drop-weight test recommended by the ACI 544 committee was used to assess the short-term dynamic behavior (352 concrete discs). Furthermore, the behavior under static load was analyzed through compressive, flexural, and tensile strength tests. During the numerical phase, artificial neural network models (ANN) and fuzzy logic models (FL) were used to predict the results of 28-day compressive strength. The impact life with different failure probabilities was predicted based on the impact resistance results, by combining the Weibull distribution model. Additionally, an impact damage evolution equation was presented for mixtures containing RBP. The results show that the use of RBP up to 15% caused a slight decrease in compressive, flexural, and tensile strength (about 3–5%). Also, by replacing RBP up to 15%, the first crack strength decreased by 7.15% and the failure strength decreased by 6.46%. The average error for predicting 28-day compressive strength by FL and ANN models was recorded as 4.66% and 0.87%, respectively. In addition, the results indicate that the impact data follow the two-parameter Weibull distribution, and the R2 value for different mixtures was higher than 0.9275. The findings suggest that incorporating RBP in concrete can contribute to sustainable construction practices by reducing the reliance on cement and utilizing waste materials. This approach not only addresses environmental concerns but also enhances the quality assessment of concrete, offering potential cost savings and resource efficiency for the construction industry. Real-world applications include using RBP-enhanced concrete in non-structural elements, such as pavements, walkways, and landscaping features, where high strength is not the primary requirement.
Open AccessEmploying Neural Networks, Fuzzy Logic, and Weibull Analysis for the Evaluation of Recycled Brick Powder in Concrete Compositions
Using construction and demolition (C&D) waste in concrete production is a promising step toward environmental resilience amid the construction industry’s ecological footprint. The extensive history of using bricks in the construction of buildings has resulted in a considerable amount of waste associated with this commonly used material. This study aimed to assess the quality of concrete by examining the effect of replacing cement with varying percentages of recycled brick powder (RBP—0% to 50%). The primary objectives include evaluating the mechanical properties of concrete and establishing the feasibility of using RBP as a partial cement substitute. The investigation of target concrete can be divided into two phases: (i) laboratory investigation, and (ii) numerical investigation. In the laboratory phase, the performance of concrete with RBP was assessed under short-term dynamic and various static loads. The drop-weight test recommended by the ACI 544 committee was used to assess the short-term dynamic behavior (352 concrete discs). Furthermore, the behavior under static load was analyzed through compressive, flexural, and tensile strength tests. During the numerical phase, artificial neural network models (ANN) and fuzzy logic models (FL) were used to predict the results of 28-day compressive strength. The impact life with different failure probabilities was predicted based on the impact resistance results, by combining the Weibull distribution model. Additionally, an impact damage evolution equation was presented for mixtures containing RBP. The results show that the use of RBP up to 15% caused a slight decrease in compressive, flexural, and tensile strength (about 3–5%). Also, by replacing RBP up to 15%, the first crack strength decreased by 7.15% and the failure strength decreased by 6.46%. The average error for predicting 28-day compressive strength by FL and ANN models was recorded as 4.66% and 0.87%, respectively. In addition, the results indicate that the impact data follow the two-parameter Weibull distribution, and the R2 value for different mixtures was higher than 0.9275. The findings suggest that incorporating RBP in concrete can contribute to sustainable construction practices by reducing the reliance on cement and utilizing waste materials. This approach not only addresses environmental concerns but also enhances the quality assessment of concrete, offering potential cost savings and resource efficiency for the construction industry. Real-world applications include using RBP-enhanced concrete in non-structural elements, such as pavements, walkways, and landscaping features, where high strength is not the primary requirement.
- 24 June 2024
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 9  (7) , 1-17
Steel slag and zeolite as sustainable pozzolans for UHPC: an experimental study of binary and ternary pozzolan mixtures under various curing conditions
- 24 June 2024
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 9  (7) , 1-17
Steel slag and zeolite as sustainable pozzolans for UHPC: an experimental study of binary and ternary pozzolan mixtures under various curing conditions
- 18 June 2024
- Published by Springer Nature in Multiscale and Multidisciplinary Modeling, Experiments and Design
- Vol. 7  (6) , 5051-5078
Investigation mechanical characteristics and permeability of concrete with pozzolanic materials: a sustainable approach
- 18 June 2024
- Published by Springer Nature in Multiscale and Multidisciplinary Modeling, Experiments and Design
- Vol. 7  (6) , 5051-5078
Investigation mechanical characteristics and permeability of concrete with pozzolanic materials: a sustainable approach
- 25 April 2024
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 9  (5) , 1-19
Synergistic effects of pozzolan and carbon fibers on the performance of self-consolidating concrete under plastic shrinkage and dynamic loading
- 25 April 2024
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 9  (5) , 1-19
Synergistic effects of pozzolan and carbon fibers on the performance of self-consolidating concrete under plastic shrinkage and dynamic loading