Radek Doubrava
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Radek Doubrava has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Martin Oberthor
5 shared publicationsPetr Bělský
Division Aviation, Vyzkumny a Zkusebni Letecky Ustav, Prague, Czech Republic
4 shared publications- Roman Růžek
Strength of Structures, Aerospace Research and Test Establishment (VZLU, Prague, Czech Republic
4 shared publications - Martin Kadlec
VZLU–Czech Aerospace Research Centre, 19900 Prague, Czech Republic
3 shared publications - Jan Horňas
VZLU AEROSPACE, Beranových 130, 19900 Prague, Czech Republic
2 shared publications Jan Raška
VZLÚ Czech Aerospace Research Centre) Beranových 130 Prague 9 -Letňany 19905
2 shared publications
Latest Publications
- 24 March 2024
- Published by Elsevier in Engineering Failure Analysis
- Vol. 161
Bird strike tests, analyses, and design optimisation of a tilt-rotor aircraft composite inlet
- 24 March 2024
- Published by Elsevier in Engineering Failure Analysis
- Vol. 161
Bird strike tests, analyses, and design optimisation of a tilt-rotor aircraft composite inlet
- Open Access
Strain-Field Modifications in the Surroundings of Impact Damage of Carbon/Epoxy Laminate
The relationship between deformation and stress is crucial for any elasto-plastic body. This paper deals with the experimental identification of the basic parameters of the composite laminate model in relation to the finite element model. Standardized tensile, impact, and post-impact tests on a carbon fiber-reinforced epoxy laminate were used. The method by which the elasticity and failure parameters were obtained from the initial components is described. In the article, the modes of initiation and complete failure of samples in tensile tests, which are compared with the simulation, are presented. Furthermore, the article deals with the issue of the generation and detection of damage by low-speed impact, which can be caused by contact with moving objects, due to improper handling or maintenance. The results of impact analysis simulations are shown in the context of strain-field distribution changes obtained with the help of digital image correlation. The results showed high agreement between the calculations and the experiments. Based on this agreement, simulations of impact damage for various energies were performed. These simulations were used to determine the approximate sizes of the affected zones in relation to the impact energy. The results are finally discussed in the context of the possible use of structural health monitoring based on strain modifications.
Open AccessStrain-Field Modifications in the Surroundings of Impact Damage of Carbon/Epoxy Laminate
The relationship between deformation and stress is crucial for any elasto-plastic body. This paper deals with the experimental identification of the basic parameters of the composite laminate model in relation to the finite element model. Standardized tensile, impact, and post-impact tests on a carbon fiber-reinforced epoxy laminate were used. The method by which the elasticity and failure parameters were obtained from the initial components is described. In the article, the modes of initiation and complete failure of samples in tensile tests, which are compared with the simulation, are presented. Furthermore, the article deals with the issue of the generation and detection of damage by low-speed impact, which can be caused by contact with moving objects, due to improper handling or maintenance. The results of impact analysis simulations are shown in the context of strain-field distribution changes obtained with the help of digital image correlation. The results showed high agreement between the calculations and the experiments. Based on this agreement, simulations of impact damage for various energies were performed. These simulations were used to determine the approximate sizes of the affected zones in relation to the impact energy. The results are finally discussed in the context of the possible use of structural health monitoring based on strain modifications.
- Open Access
- 20 June 2022
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 13 (4) , 649-658
Application of bird-strike verified analysis for the design of fast helicopter composite cowling
Purpose: The purpose of this paper is to describe the approach for the design of cowlings for a new fast helicopter from the perspective of airworthiness requirements regarding high-speed impact resistance.Design/methodology/approach: Validated numerical simulation was applied to flat and simple curved test panels. High-speed camera measurement and non-destructive testing (NDT) results were used for verification of the numerical models. The final design was optimized and verified by validated numerical simulation.Findings: The comparison between numerical simulation based on static material properties with experimental results of high-speed load shows no significant influence of strain rate effect in composite material.Research limitations/implications: Owing to the sensitivity of the composite material on technology production, the results are limited by the material used and the production technology.Practical implications: The application of flat and simple curved test panels for the verification and calibration of numerical models allows the optimized final design of the cowling and reduces the risk of structural non-compliance during verification tests.Originality/value: Numerical models were verified for simulation of the real composite structure based on high-speed camera results and NDT inspection after impact. The proposed numerical model was simplified for application in a complex design and reduced calculation time.
- 20 June 2022
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 13 (4) , 649-658
Open AccessApplication of bird-strike verified analysis for the design of fast helicopter composite cowling
Purpose: The purpose of this paper is to describe the approach for the design of cowlings for a new fast helicopter from the perspective of airworthiness requirements regarding high-speed impact resistance.Design/methodology/approach: Validated numerical simulation was applied to flat and simple curved test panels. High-speed camera measurement and non-destructive testing (NDT) results were used for verification of the numerical models. The final design was optimized and verified by validated numerical simulation.Findings: The comparison between numerical simulation based on static material properties with experimental results of high-speed load shows no significant influence of strain rate effect in composite material.Research limitations/implications: Owing to the sensitivity of the composite material on technology production, the results are limited by the material used and the production technology.Practical implications: The application of flat and simple curved test panels for the verification and calibration of numerical models allows the optimized final design of the cowling and reduces the risk of structural non-compliance during verification tests.Originality/value: Numerical models were verified for simulation of the real composite structure based on high-speed camera results and NDT inspection after impact. The proposed numerical model was simplified for application in a complex design and reduced calculation time.
- Open Access
Linearization of Composite Material Damage Model Results and Its Impact on the Subsequent Stress–Strain Analysis
To solve problems in the field of mechanical engineering efficiently, individual numerical procedures must be developed, and solvers must be adapted. This study applies the results of a carbon-fibre reinforced polymer (CFRP) analysis along with the nonlinear finite element damage (FE) method to the translation of a linear solver. The analyzed tensile test sample is modelled using the ply-by-ply method. To describe the nonlinear post-damage behavior of the material, the Hashin model is used. To validate the transformation, an analysis and comparison of the damage results of the linearized and nonlinear model is carried out. Job linearization was performed by collecting elements into groups based on their level of damage and pairing them with unique material cards. Potentially suitable mathematical functions are tested for the grouping and consolidation of the elements. The results show that the agreement of some presented methods depends on the damage level. The influence of the selected statistical functions on the result is shown here. The optimal solution is demonstrated, and the most efficient method of linearization is presented. The main motivation behind this work is that the problem has not been discussed in the literature and that there is currently no commercial software translator that provides the transference of models between solvers.
Open AccessLinearization of Composite Material Damage Model Results and Its Impact on the Subsequent Stress–Strain Analysis
To solve problems in the field of mechanical engineering efficiently, individual numerical procedures must be developed, and solvers must be adapted. This study applies the results of a carbon-fibre reinforced polymer (CFRP) analysis along with the nonlinear finite element damage (FE) method to the translation of a linear solver. The analyzed tensile test sample is modelled using the ply-by-ply method. To describe the nonlinear post-damage behavior of the material, the Hashin model is used. To validate the transformation, an analysis and comparison of the damage results of the linearized and nonlinear model is carried out. Job linearization was performed by collecting elements into groups based on their level of damage and pairing them with unique material cards. Potentially suitable mathematical functions are tested for the grouping and consolidation of the elements. The results show that the agreement of some presented methods depends on the damage level. The influence of the selected statistical functions on the result is shown here. The optimal solution is demonstrated, and the most efficient method of linearization is presented. The main motivation behind this work is that the problem has not been discussed in the literature and that there is currently no commercial software translator that provides the transference of models between solvers.
- Open Access
- 15 November 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 349, 04011
Verification and application of bird strike analysis for the design of high-speed helicopter composite cowlings
Bird strikes are an important phenomenon that must be taken into consideration when designing aircraft. A bird impact experiment provides a direct method to examine the bird strike resistance. However, the design of the aircraft structures usually involves many iterations of design-manufacturing-test and conducting bird impact experiments is not only time consuming but also costly. The aim of this work is to show the application of test verified numerical simulation for the design of composite cowlings of the high-speed helicopter.
- 15 November 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 349, 04011
Open AccessVerification and application of bird strike analysis for the design of high-speed helicopter composite cowlings
Bird strikes are an important phenomenon that must be taken into consideration when designing aircraft. A bird impact experiment provides a direct method to examine the bird strike resistance. However, the design of the aircraft structures usually involves many iterations of design-manufacturing-test and conducting bird impact experiments is not only time consuming but also costly. The aim of this work is to show the application of test verified numerical simulation for the design of composite cowlings of the high-speed helicopter.
- Open Access
Optimal Design and Testing of a Thermoplastic Pressurized Passenger Door Manufactured Using Thermoforming
The present paper documents and discusses research work associated with a newly designed passenger door structure demonstrator. The composite structure was manufactured from carbon-fiber-reinforced thermoplastic resin. A composite frame with a variable cross-section was designed, optimized, and fabricated using thermoforming technology. Both numerical simulations and experiments supported structural verification according to the damage tolerance philosophy; i.e., impact damage is presented. The Tsai-Wu and maximal stress criteria were used for damage analysis of the composite parts. Topological optimization of the metal hinges from the point of view of weight reduction was used. All expected parameters and proposed requirements of the mechanical properties were proved and completed. The door panel showed an expected numerically evaluated residual strength (ultimate structure load) as well as meeting airworthiness requirements. No impact damage propagation in the composite parts was observed during mechanical tests, even though visible impact damage was introduced into the structure. No significant difference between the numerical simulations and the experimentally measured total deformation was observed. Repeated deformation measurements during fatigue showed a nonlinear structure behavior. This can be attributed to the relaxation of thermoplastics.
Open AccessOptimal Design and Testing of a Thermoplastic Pressurized Passenger Door Manufactured Using Thermoforming
The present paper documents and discusses research work associated with a newly designed passenger door structure demonstrator. The composite structure was manufactured from carbon-fiber-reinforced thermoplastic resin. A composite frame with a variable cross-section was designed, optimized, and fabricated using thermoforming technology. Both numerical simulations and experiments supported structural verification according to the damage tolerance philosophy; i.e., impact damage is presented. The Tsai-Wu and maximal stress criteria were used for damage analysis of the composite parts. Topological optimization of the metal hinges from the point of view of weight reduction was used. All expected parameters and proposed requirements of the mechanical properties were proved and completed. The door panel showed an expected numerically evaluated residual strength (ultimate structure load) as well as meeting airworthiness requirements. No impact damage propagation in the composite parts was observed during mechanical tests, even though visible impact damage was introduced into the structure. No significant difference between the numerical simulations and the experimentally measured total deformation was observed. Repeated deformation measurements during fatigue showed a nonlinear structure behavior. This can be attributed to the relaxation of thermoplastics.
- 4 March 2019
- Published by Emerald Publishing in Aircraft Engineering and Aerospace Technology
- Vol. 91 (3) , 457-465
New hail impact simulation models on composite laminated wing leading edge
Purpose: The risk of hail-impact occurrence that can decrease local strength property must be taken into account in the design of primary airframe structures in aviation, energy and space industries. Because of the high-speed of hail impact in operation, it can affect the load carrying capacity. Testing all impact scenarios onto real structure is expensive and impractical. The purpose of this paper is to present a cost-effective hybrid testing regime including experimental tests and FEM-based simulations for airframe parts that are locally exposed to the impacting hail in flight.Design/methodology/approach: Tested samples (specimens) are flat panels of laminated and sandwich carbon/epoxy composites that are used in designing lightweight new airframes. The presented numerical simulations provide a cost effective and convenient tool for investigating the hail impact scenarios in the design process. The smoothed particle hydrodynamics (SPH) technique was selected for the simulation of projectiles. The most commonly used shape of projectiles in hail impact tests is the ice ball with a defined diameter. The proposed simulation technique was verified and validated in tests on flat composite panels (specimens).Findings: Integration of the numerical analyses with high-speed impact tests of hail onto flat laminated and sandwich composite shells has been presented, and a developed simulation model for impact results assessment was obtained.Originality/value: The tested coupons (specimens) are flat panels as representative of structural design deployed in real aircraft structures. These numerical simulations provide a cost effective and convenient tool for hail impact scenarios in the design process.
- 4 March 2019
- Published by Emerald Publishing in Aircraft Engineering and Aerospace Technology
- Vol. 91 (3) , 457-465
New hail impact simulation models on composite laminated wing leading edge
Purpose: The risk of hail-impact occurrence that can decrease local strength property must be taken into account in the design of primary airframe structures in aviation, energy and space industries. Because of the high-speed of hail impact in operation, it can affect the load carrying capacity. Testing all impact scenarios onto real structure is expensive and impractical. The purpose of this paper is to present a cost-effective hybrid testing regime including experimental tests and FEM-based simulations for airframe parts that are locally exposed to the impacting hail in flight.Design/methodology/approach: Tested samples (specimens) are flat panels of laminated and sandwich carbon/epoxy composites that are used in designing lightweight new airframes. The presented numerical simulations provide a cost effective and convenient tool for investigating the hail impact scenarios in the design process. The smoothed particle hydrodynamics (SPH) technique was selected for the simulation of projectiles. The most commonly used shape of projectiles in hail impact tests is the ice ball with a defined diameter. The proposed simulation technique was verified and validated in tests on flat composite panels (specimens).Findings: Integration of the numerical analyses with high-speed impact tests of hail onto flat laminated and sandwich composite shells has been presented, and a developed simulation model for impact results assessment was obtained.Originality/value: The tested coupons (specimens) are flat panels as representative of structural design deployed in real aircraft structures. These numerical simulations provide a cost effective and convenient tool for hail impact scenarios in the design process.
- Open Access
- 1 January 2019
- Published by Brno University of Technology
- p. 7-14
Verification and numerical simulation of advanced composite inlet in compliance of airworthiness impact requirements
Bird or hail stone strikes are an important phenomenon which must be considered during aircraft design. Most of major bird or hail strike incidents result from engine ingestion. As engines are the sole thrust providing mechanisms of an aircraft, it is critical to investigate and mitigate the effects of bird or hail strikes on engine inlets and systems to the greatest extent possible. The article presents application of test verified numerical simulation for design and full-scale test verification of advanced composite air inlet for new generation of jet trainer aircraft from point of view of high speed impact resistance. The physical bird and hail impact tests were performed at the Czech Aerospace Research Centre (VZLÚ) according to airworthiness requirements. The measurement during impact test were performed by high-speed camera, Fiber Bragg Grating (FGB) sensors and strain gauges in cooperation with Czech Technical University (CTU) in Prague. The results from full-scale bird and hail strike tests were compared with numerical simulation.
- 1 January 2019
- Published by Brno University of Technology
- p. 7-14
Open AccessVerification and numerical simulation of advanced composite inlet in compliance of airworthiness impact requirements
Bird or hail stone strikes are an important phenomenon which must be considered during aircraft design. Most of major bird or hail strike incidents result from engine ingestion. As engines are the sole thrust providing mechanisms of an aircraft, it is critical to investigate and mitigate the effects of bird or hail strikes on engine inlets and systems to the greatest extent possible. The article presents application of test verified numerical simulation for design and full-scale test verification of advanced composite air inlet for new generation of jet trainer aircraft from point of view of high speed impact resistance. The physical bird and hail impact tests were performed at the Czech Aerospace Research Centre (VZLÚ) according to airworthiness requirements. The measurement during impact test were performed by high-speed camera, Fiber Bragg Grating (FGB) sensors and strain gauges in cooperation with Czech Technical University (CTU) in Prague. The results from full-scale bird and hail strike tests were compared with numerical simulation.
- Open Access
- 7 August 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 188, 04006
Bird and hail stone impact resistance analysis on a jet engine composite air inlet
Bird or hail stone impacts are an important phenomenon that must be taken into consideration when designing aircraft. As engines are the sole thrust-providing mechanisms of an aircraft, it is critical that the effects of bird or hail stone strikes on engine inlets and systems be investigated and mitigated to the greatest extent possible. A combination of experiments and numerical simulations is necessary to properly understand the behaviour of a bird or hail stone during impact and the reaction of the impacted material with the structure. A simulation methodology is developed and validated to certify the bird or hail stone strike resistance of composite air ducts designed for a new generation of jet training aircraft. Physical impact tests were performed on real composite parts. Numerical simulation results were compared with test results. Numerical simulation was also used for test preparation and optimization of the test rig design from the point of view of the influence of the stiffness of the surrounding aircraft structure. The validated modelling procedure allows the analysis of numerous impact scenarios, improving the optimization procedures for aircraft component design and reducing the cost of development by reducing the need to manufacture test prototypes.
- 7 August 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 188, 04006
Open AccessBird and hail stone impact resistance analysis on a jet engine composite air inlet
Bird or hail stone impacts are an important phenomenon that must be taken into consideration when designing aircraft. As engines are the sole thrust-providing mechanisms of an aircraft, it is critical that the effects of bird or hail stone strikes on engine inlets and systems be investigated and mitigated to the greatest extent possible. A combination of experiments and numerical simulations is necessary to properly understand the behaviour of a bird or hail stone during impact and the reaction of the impacted material with the structure. A simulation methodology is developed and validated to certify the bird or hail stone strike resistance of composite air ducts designed for a new generation of jet training aircraft. Physical impact tests were performed on real composite parts. Numerical simulation results were compared with test results. Numerical simulation was also used for test preparation and optimization of the test rig design from the point of view of the influence of the stiffness of the surrounding aircraft structure. The validated modelling procedure allows the analysis of numerous impact scenarios, improving the optimization procedures for aircraft component design and reducing the cost of development by reducing the need to manufacture test prototypes.
- 1 April 2012
- Published by Elsevier in International Journal of Fatigue
- Vol. 37, 92-99
Application of indentation as a retardation mechanism for fatigue crack growth
- 1 April 2012
- Published by Elsevier in International Journal of Fatigue
- Vol. 37, 92-99
Application of indentation as a retardation mechanism for fatigue crack growth