Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daniel S. Kissel has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Defect Engineering in Zr (IV)- and Ti (IV)-Based Metal–Organic Frameworks to Enhance Photocatalytic Properties

    by Adan Martinez, Emily Pearce, John Kurowski, Daniel S. Kissel

    Metal–organic frameworks (MOFs) are unique microporous materials being explored for a wide range of applications. Their porosity and high surface areas can readily be exploited for guest–host interactions, separations, and photochemical catalysis, but many suffer from poor charge separation and fast electron–hole recombination. Introducing structural defects, such as missing linkers or metal nodes, can create unsaturated metal sites and alter band structure, conductivity, and light absorption, improving photocatalytic performance. UiO-66-NH2 and MIL-125-NH2 are water-stable, visible-light-absorbing MOFs well suited for photocatalytic degradation of organic dyes. In this work, the influence of defect engineering on photocatalytic properties of MOFs was investigated using formic and acetic acid modulators with UiO-66-NH2 and variable temperature with MIL-125-NH2 during synthesis. The resulting materials were characterized by XRD, FTIR and SEM/EDS. Defect states were tracked using N2 adsorption/BET analysis and UV–Vis spectroscopy. Photocatalytic activity was evaluated by monitoring Rhodamine B (RhB) degradation in aqueous solution under simulated solar irradiation. It was found that increased temperature beyond 120 °C during synthesis promotes mesopore formation and decreases the bandgap in MIL-125-NH2, resulting in a more photoactive material. Defective MIL-125-NH2 synthesized at 150 °C showed the most defects and proved to be the best photocatalyst investigated in this study. Formic acid modulation in UiO-66-NH2 generated smaller crystallites that slightly increased the bandgap; however, the surface area decreased proportionally with the amount of formic acid used. The decreased surface area and observed enhancement in photocatalytic degradation of RhB suggest that formic acid introduces defects into the UiO-66-NH2 framework that enhance photocatalytic properties. UiO-66-NH2 treated with acetic acid resulted in larger crystals, increased bandgaps, and increased surface areas, suggesting that acetic acid simply modulates growth rather than imparting defects to the framework.


  • Open Access

    A Novel Approach to MOF-Anchoring Using Cross-Linked Polyaniline and Amine-Functionalized MOF to Generate Polymer-MOF Composites and Functionalized Graphite Electrodes

    by Nathan Hajek, Adan Martinez, Adam Makhlouf, Daniel Kissel

    This investigation explores a novel approach to MOF anchoring using cross-linked polyaniline (PANI-XL) and MIL-125-NH2 via thermal treatment in THF to engineer an effective material for electrochemical devices. Successful synthesis of these materials was confirmed using FTIR spectroscopy, powder X-ray diffraction, and BET surface area analysis. The PANI-XL@MIL-125-NH2 composites display altered chemical and microstructural properties upon the thermal treatment in THF. The MIL-125-NH2 lattice undergoes a mixture of expansion and compression, with an amorphous phase only being introduced upon the introduction of a significant weight fraction of PANI. The surface area of the 1:1 PANI-XL@MIL-125-NH2 material decreases from 1190.233 m2 g–1 to 354.815 m2 g–1, while the pore volume decreases from 0.5808 cm3 to 0.1475 cm3 after cross-linking. The pore structure reflects the uptake of the polymer, shifting from ultramicropores to a more slit-shaped pore structure. SEM images of the material synthesized on oxidized graphite reveal the MOF present as an easily identifiable phase in the film’s morphology. After a film was synthesized onto oxidized graphite, the sheet resistivity measurements of the composites were conducted under air at room temperature using a four-point probe to confirm enhanced conductivity upon thermal treatment. Electrochemical measurements suggest improved performance, increased stability, and enhanced chemical reversibility relative to systems without thermal treatment.


  • Designing novel tunable Mn-based inorganic oxyfluoride pigments

    by Brianna Lehr, George Zurowski, Justin Chhoeun, Khagesh Kumar, Gene Nolis, Jordan Shanahan, Kathryn Kilpatrick, Katie Rojas, Jordi Cabana, Daniel Kissel, et al.


  • Sulfur-bridging the gap: investigating the electrochemistry of novel copper chelating agents for Alzheimer's disease applications

    by Emma Crnich, Erik Sanchez, Mallory A. Havens, Daniel S. Kissel

    There is currently an unmet demand for multi-functional precision treatments for Alzheimer's disease (AD) after several failed attempts at designing drugs based on the amyloid hypothesis. The focus of this work is to investigate sulfur-bridged quinoline ligands that could potentially be used in chelation therapies for a subpopulation of AD patients presenting with an overload of labile copper ions, which are known to catalyze the production of reactive oxygen species (ROS) and exacerbate other markers of AD progression. The ligands 1-(2′-thiopyridyl)isoquinoline (1TPIQ) and 2-(2′-thiopyridyl)quinoline (2TPQ) were synthesized and characterized before being electrochemically investigated in the presence of different oxidizing and reducing agents in solution with a physiological pH relevant to the brain. The electrochemical response of each compound with copper was studied by employing both hydrogen peroxide (H2O2) as an oxidizing agent and ascorbic acid (AA) as an antioxidant during analysis using cyclic voltammetry (CV). The cyclic voltammograms of each quinoline were compared with similar ligands that contained aromatic N-donor groups but no sulfur groups to provide relative electrochemical properties of each complex in solution. In a dose-dependent manner, it was observed that AA exerted dual-efficacy when combined with these chelating ligands: promoting synergistic metal binding while also scavenging harmful ROS, suggesting AA is an effective adjuvant therapeutic agent. Overall, this study shows how coordination by sulfur-bridged quinoline ligands can alter copper electrochemistry in the presence of AA to limit ROS production in solution. Graphical abstract


  • Open Access

    Buffer Effects in Zirconium-Based UiO Metal–Organic Frameworks (MOFs) That Influence Enzyme Immobilization and Catalytic Activity in Enzyme/MOF Biocatalysts

    by Raneem Ahmad, Sydnie Rizaldo, Mahnaz Gohari, Jordan Shanahan, Sarah E. Shaner, Kari L. Stone, Daniel S. Kissel

    Novel biocatalysts that feature enzymes immobilized onto solid supports have recently become a major research focus in an effort to create more sustainable and greener chemistries in catalysis. Many of these novel biocatalyst systems feature enzymes immobilized onto metal–organic frameworks (MOFs), which have been shown to increase enzyme activity, stability, and recyclability in industrial processes. While the strategies used for immobilizing enzymes onto MOFs can vary, the conditions always require a buffer to maintain the functionality of the enzymes during immobilization. This report brings attention to critical buffer effects important to consider when developing enzyme/MOF biocatalysts, specifically for buffering systems containing phosphate ions. A comparative analysis of different enzyme/MOF biocatalysts featuring horseradish peroxidase and/or glucose oxidase immobilized onto the MOFs UiO-66, UiO-66-NH2, and UiO-67 using a noncoordinate buffering system (MOPSO buffer) and a phosphate buffering system (PBS) show that phosphate ions can have an inhibitory effect. Previous studies utilizing phosphate buffers for enzyme immobilization onto MOFs have shown Fourier transform infrared (FT-IR) spectra that have been assigned stretching frequencies associated with enzymes after immobilization. Analyses and characterizations using zeta potential measurements, scanning electron microscopy, Brunauer–Emmett–Teller surface area, powder X-ray diffraction, Energy Dispersive X-ray Spectroscopy, and FT-IR show concerning differences in enzyme loading and activity based on the buffering system used during immobilization.


  • Open Access

    Immobilization of a Bienzymatic System via Crosslinking to a Metal-Organic Framework

    by Raneem Ahmad, Sydnie Rizaldo, Sarah E. Shaner, Daniel S. Kissel, Kari L. Stone

    A leading biotechnological advancement in the field of biocatalysis is the immobilization of enzymes on solid supports to create more stable and recyclable systems. Metal-organic frameworks (MOFs) are porous materials that have been explored as solid supports for enzyme immobilization. Composed of organic linkers and inorganic nodes, MOFs feature empty void space with large surface areas and have the ability to be modified post-synthesis. Our target enzyme system for immobilization is glucose oxidase (GOx) and chloroperoxidase (CPO). Glucose oxidase catalyzes the oxidation of glucose and is used for many applications in biosensing, biofuel cells, and food production. Chloroperoxidase is a fungal heme enzyme that catalyzes peroxide-dependent halogenation, oxidation, and hydroxylation. These two enzymes work sequentially in this enzyme system by GOx producing peroxide, which activates CPO that reacts with a suitable substrate. This study focuses on using a zirconium-based MOF, UiO-66-NH2, to immobilize the enzyme system via crosslinking with the MOF’s amine group on the surface of the MOF. This study investigates two different crosslinkers: disuccinimidyl glutarate (DSG) and 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC)/N-hydroxysuccinidimide (NHS), providing stable crosslinking of the MOF to the enzymes. The two crosslinkers are used to covalently bond CPO and GOx onto UiO-66-NH2, and a comparison of the recyclability and enzymatic activity of the single immobilization of CPO and the doubly immobilized CPO and GOx is discussed through assays and characterization analyses. The DSG-crosslinked composites displayed enhanced activity relative to the free enzyme, and all crosslinked enzyme/MOF composites demonstrated recyclability, with at least 30% of the activity being retained after four catalytic cycles. The results of this report will aid researchers in utilizing CPO as a biocatalyst that is more active and has greater recyclability.


  • Open Access

    Co-immobilization of an Enzyme System on a Metal-Organic Framework to Produce a More Effective Biocatalyst

    by Raneem Ahmad, Jordan Shanahan, Sydnie Rizaldo, Daniel S. Kissel, Kari L. Stone

    In many respects, enzymes offer advantages over traditional chemical processes due to their decreased energy requirements for function and inherent greener processing. However, significant barriers exist for the utilization of enzymes in industrial processes due to their limited stabilities and inability to operate over larger temperature and pH ranges. Immobilization of enzymes onto solid supports has gained attention as an alternative to traditional chemical processes due to enhanced enzymatic performance and stability. This study demonstrates the co-immobilization of glucose oxidase (GOx) and horseradish peroxidase (HRP) as an enzyme system on Metal-Organic Frameworks (MOFs), UiO-66 and UiO-66-NH2, that produces a more effective biocatalyst as shown by the oxidation of pyrogallol. The two MOFs utilized as solid supports for immobilization were chosen to investigate how modifications of the MOF linker affect stability at the enzyme/MOF interface and subsequent activity of the enzyme system. The enzymes work in concert with activation of HRP through the addition of glucose as a substrate for GOx. Enzyme immobilization and leaching studies showed HRP/GOx@UiO-66-NH2 immobilized 6% more than HRP/GOx@UiO-66, and leached only 36% of the immobilized enzymes over three days in the solution. The enzyme/MOF composites also showed increased enzyme activity in comparison with the free enzyme system: the composite HRP/GOx@UiO-66-NH2 displayed 189 U/mg activity and HRP/GOx@UiO-66 showed 143 U/mg while the free enzyme showed 100 U/mg enzyme activity. This increase in stability and activity is due to the amine group of the MOF linker in HRP/GOx@UiO-66-NH2 enhancing electrostatic interactions at the enzyme/MOF interface, thereby producing the most stable biocatalyst material in solution. The HRP/GOx@UiO-66-NH2 also showed long-term stability in the solid state for over a month at room temperature.