Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Michał Musiał has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Enhancement of the Phase Transition Enthalpy of an Organic Phase Change Material Through the Use of Clinoptilolite

    by Michał Musiał, Agnieszka PęKala, Lech Lichołai, Beata Mossety-Leszczak

    The article presents a novel, energy-efficient composite of clinoptilolite and an organic phase change material (PCM), exhibiting a greater heat storage capacity than would be expected based solely on the PCM content within the composite. The study included a structural and textural analysis of clinoptilolite powder as a fine-grained material, with particular emphasis on its properties and compatibility with paraffin-based phase change materials. The second stage of the research involved determining changes in the enthalpy of melting and solidification of the composites, as well as evaluating their ability to retain the liquid phase and confirming the absence of chemical reactions between individual composite components. The obtained results demonstrated an increase in the enthalpy of the composite by approximately 14% and 44% relative to the expected values for PCM contents of 50% and 40%, respectively. Furthermore, the approximate content of paraffin-based PCM in the clinoptilolite composite at which no leakage occurs during the melting process was determined. This work represents a new approach to the integration of porous materials and phase change materials, enabling the formation of energetically favorable structures that significantly enhance the effective thermal storage capacity of PCM-based composites.

  • Open Access

    Abilities and limitations in counteracting urban heat islands

    by Michał Musiał, Anna Pomykała, Lech Lichołai

    The article presents observational and simulation trends that have been used to mitigate the urban heat island phenomenon. Due to extensive progress in computing, researchers have focused on methods based on artificial intelligence. AI offers significant potential in counteracting UHIs through rapid temperature prediction, high-resolution mapping, optimisation of green spaces, and decision support. While AI models can expedite predictions, their precision may still lag behind traditional numerical weather prediction methods. The presented tools have major limitations, including the complexity of applying artificial intelligence to process the large datasets generated during city operations. The article presents the advantages of using AI algorithms to mitigate urban heat islands, which include more efficient management of energy, heating, and water infrastructure, as well as support in urban analysis. The ability to process vast amounts of data allows for more effective use of energy and water resources in buildings while continuously improving the algorithm. The literature review involved a comparison of current methods used to counteract urban heat islands, as well as existing and potential applications of artificial intelligence algorithms described in the Scopus and Web of Science databases. The analysis included the classification of the main groups of AI algorithms, their capabilities and limitations in mitigating urban heat islands, and an overview of the main trends in contemporary scientific articles on the use of AI in architecture. The selection criteria for the literature included the publication period (2016–2024), the applicability of the described solutions, and the current limitations and disadvantages of their use. The article highlights the main challenges in the widespread adoption of artificial intelligence in architecture.

  • Open Access

    Carpathian Diatomites and Their Applications in Phase-Change Composites

    by Agnieszka Pękala, Michał Musiał, Lech Lichołai

    Based on a review of the existing literature on the use of diatomite and the functioning of phase-change heat accumulators, in this study, we conducted empirical research on the creation of a phase-change composite based on Carpathian diatomite. As part of our mineralogical research, we determined the phase composition of the Carpathian diatomites in this work. Their internal nanostructure was identified. Nanopores create regular systems that, depending on the variety of diatoms, may have sieve, tubular, or “honeycomb” shapes. Diatomites’ internal structure benefits the absorption capacity of phase-change materials (PCM). The obtained calorimetric thermograms of the organic phase-change material and the diatomite compound highlighted an extension of the temperature range in which phase transformation occurs from 4–5 °C (for pure PCM RT28HC) to 15–17 °C for the composites tested with weight proportions of 1:1 and 4:6. In the case of water-rich varieties, the presence of mixed-package minerals, i.e., montmorillonite, with its small size and specific 2:1 package structure, can hinder the penetration and accumulation of PCM. The ability to bind and accumulate heat will be influenced by the size of the diatomite particles or the relative size of the PCM and pores, i.e., structural and textural features.


  • Open Access

    Trace Elements Anomalous Concentrations in Building Materials—The Impact of Secondary Mineralisation Processes

    by Agnieszka Pękala, Piotr Koszelnik, Michał Musiał, Tomasz Galek

    The Pb, Cr, Cd, Ni, Zn, Cu, Co, As, Sr, Ba, and Zr content has been determined in the tested rock raw materials. The concentration of cadmium (Cd) was found to be elevated in all types of rock materials and was found on average to be: 1.39 mg/kg in limestones, 0.86 mg/kg—sandstones, 0.44 mg/kg—diatomites, 0.55 mg/kg—opoka rocks, 0.89 mg/kg—marls, 0.21 mg/kg—gaizes 0.42 mg/kg—kaolin clays, and 2.13 mg/kg—decalcified opoka rocks. Higher concentrations of arsenic (As) have also been recorded in sandstones and diatomites, as well as lead (Pb) in limestones and sandstones. The results obtained indicate that the anomalous level of elements is of natural origin and the results of identified secondary mineralisation processes that have affected the tested materials. Pyritization and sulfatization processes have been detected. Mineralogical research has shown that these processes can be associated with the activity of biochemical processes caused by the decomposition of the soft tissues of animal organisms and the organic substances of plant origin that fill the stylolites. It has been shown that the content of strontium (Sr) increases in geologically older Jurassic formations compared to younger Cretaceous formations, which can be used in the monitoring of building materials.


  • Open Access

    Multi-Faceted Analysis of Phase-Change Composite Intended for Autonomous Buildings

    by Michał Musiał, Lech Lichołai

    This paper presents the long-term, holistic results of research into an innovative heat accumulator based on an organic phase-change material in the form of a mixture of aliphatic alkanes, molecular silica sieves, carbon recyclate and epoxy and cement matrices. The research included chemical testing of vacuum soaking of molecular silica sieves with a liquid phase-change material. The results proved an improvement in the heat storage efficiency of the heat accumulators due to the addition of carbon recyclate by 28%, while increasing the heat storage time by 134 min, and a reduction in PCM leakage due to the use of molecular silica sieves. In addition to its cognitive scientific value, another research objective of the work achieved was to obtain response functions in the form of approximating polynomials. They provide a useful, validated and verified tool to predict the physical and chemical characteristics of heat accumulators with different contents of individual components. As part of the ongoing research, technical problems related to leak-proofing assurance and matrix selection for organic phase-change materials were also solved. The solution presented is in line with the issues of efficient use of renewable energy, low-carbon and energy-efficient circular economy.


  • Open Access

    Modern Thermal Energy Storage Systems Dedicated to Autonomous Buildings

    by Michał Musiał, Lech Lichołai, Dušan Katunský

    This paper presents a detailed analysis of the research into modern thermal energy storage systems dedicated to autonomous buildings. The paper systematises the current state of knowledge concerning thermal energy storage systems and their use of either phase change materials or sorption systems; it notes their benefits, drawbacks, application options, and potential directions for future development. The rapid proliferation of studies on installation systems, new composites, and phase change materials requires a systematisation of the subject related to short- and long-term thermal energy storage in building structures. This paper focuses on assessing the validity of the current improved thermal energy storage solutions for buildings with very high energy efficiency standards and buildings that are energy-independent. The paper presents the current results of the energy and economic analyses of the use of heat storage systems in buildings. This paper shows the optimal heat storage systems for autonomous buildings. Moreover, it also shows other potential ways to develop systems and composites capable of storing heat in autonomous buildings.


  • Open Access

    Analysis of the Thermal Performance of Isothermal Composite Heat Accumulators Containing Organic Phase-Change Material

    by Michał Musiał, Lech Lichołai, Agnieszka Pękala

    This paper presents the results of material tests, experimental tests and statistical analysis of the thermal performance of three types of heat accumulators containing an organic phase-change material and two materials of a higher thermal conductivity: a copper mesh and porous coke recyclate. The aim of the research was to empirically and statistically compare the increase in the PCM heat distribution through a copper conductor and coke recyclate. The research was conducted in accordance with an incomplete central compositional experimental design and using the Statistica software. The studies of the structure and chemical composition of the coke recyclate used and the empirical testing of the finished heat accumulators confirmed an improvement in the distribution and storage of heat by the accumulator with the phase-change material and coke recyclate compared to the pure phase-change material and copper-conductor accumulators, as the holding time of a temperature of 20 °C was extended by seven minutes and nine minutes, respectively. Moreover, the results of the statistical analysis provided answers as to which of the assumed input quantities—initial temperature, battery geometry, and heating temperature—were statistically significant for each of the three battery types considered. The determined approximating functions were verified in terms of the statistical validity of their use for all three types of heat accumulators tested. The results obtained are important answers to the current problems in the design and modification of phase-change heat accumulators applied in the construction industry to reduce the emissivity of structures and increase their energy efficiency.


  • Open Access

    Pyritization in Stone-Building Materials Modeling of Geochemical Interaction

    by Agnieszka Pękala, Michał Musiał, Tomasz Galek

    Stone-building materials, despite their natural origin, must be tested for the concentration of trace elements necessary to assess their impact on the environment and humans. In addition to basic research determining their mineral composition and structural and textural features, it is important to analyze the geochemical interactions between the material matrix and the concentration of elements that have a negative impact on the surrounding natural environment and our health. In the presented study, mineralogical and geochemical studies were carried out on the Carpathian sandstones. It was shown that the studied sandstones are represented by lithic wackes and sublithic arenites. Rocks subject to the secondary process of sulfide mineralization were observed among sublithic arenites. Pyrite in the studied geomaterials took various forms. A detailed geochemical analysis was carried out in the material in which iron sulfides acted as a binder. The research was aimed at identifying possible variations in the concentration of elements, with a particular emphasis on the contact between the silica and mineralized phases. The assessment of the geochemical interaction of iron sulfides with silica at a successively enlarged measurement was carried out using the Mamdani–Assilian fuzzy inference model.


  • Open Access

    Functioning of Heat Accumulating Composites of Carbon Recyclate and Phase Change Material

    by Michał Musiał, Agnieszka Pękala

    The article presents the results of experimental research together with the development of a response function presenting the thermal functioning of a new composite of a phase change material with carbon recyclate. The empirical research proved the improvement of the thermal functioning of the phase change material as a result of modifying its structure with carbon-based recycling material. The conducted experimental tests and statistical analysis proved that the obtained innovative composite is characterized by a more effective distribution of stored heat than the pure phase change material, which resulted in reduction of the heating and cooling time of the package by 10 min. The obtained innovative composite can improve the thermal efficiency of short-term heat storage systems, both in building components and in elements of heating and cooling systems, and translates into their increase in thermal efficiency.


  • Open Access

    Modelling the Leachability of Strontium and Barium from Stone Building Materials

    by Agnieszka Pękala, Michał Musiał

    In order that the impact on the environment and human beings can be assessed, it may prove necessary for geochemical research work to entail determinations of concentrations of trace elements in building materials, and it is also likely that this will be a time-consuming and financially-demanding business. Additionally, once basic research has been carried out to determine the mineral composition and structural and textural features, it will then be important to determine concentrations of elements that affect the surrounding natural environment and the health of human beings. This paper thus describes mineralogical and geochemical analyses performed on the stone material that opoka rocks represent. Mineralogical studies have shown that the studied opoka rocks most often have cryptocrystalline silica dispersed among carbonate components. The texture of the rock is slightly porous. Silica in the form of type opal A and CT (cristobalite–tridymite) is the main mineral component of the opoka rocks. Carbonate minerals represented by calcite were an important component in the opoka rocks. Earlier geochemical studies focused on the concentration of Sr and Ba. However, the determination of the leachability of these elements as a function of time is a novelty in this study. Trace elements leached from the material matrix were made subject to determinations. The MATLAB program was used to assess leachability in the cases of both strontium and barium, by reference to the Mamdani–Assilian fuzzy algorithm. The presented work has thus sought to experiment with the use of statistical methods to monitor the effectiveness of geochemical processes taking place over time.