Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Laura Kasper has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fix-Wavelength Multi-Analyte Detection with Serial SOI Ring Resonators

    by Laura Kasper, Abbas Zein Al-Din, Jürgen Bruns, Rudolf Volkmer, Klaus Petermann

    We present a method for the read-out of five serially arranged SOI ring resonator-based biosensors at a speed of 3 Hz/sensor and a fixed wavelength of 1550 nm. The system uses the high thermo-optical coefficient of silicon by applying AC voltages to periodically heat up electrodes adjacent to each sensor. A time-division multiplex scheme allows the allocation of the measured optical output from the mutual spectrum to each specific resonator. We demonstrate our system by immobilizing two different antibodies (biotin and a hexa-His-peptide) at the surface of selected resonators and successfully showing the selective binding characteristics of analyte probing in a microfluidics supported experiments.

  • Open Access

    An Approach to Ring Resonator Biosensing Assisted by Dielectrophoresis: Design, Simulation and Fabrication

    by Anders Henriksson, Laura Kasper, Matthias Jäger, Peter Neubauer, Mario Birkholz

    The combination of extreme miniaturization with a high sensitivity and the potential to be integrated in an array form on a chip has made silicon-based photonic microring resonators a very attractive research topic. As biosensors are approaching the nanoscale, analyte mass transfer and bonding kinetics have been ascribed as crucial factors that limit their performance. One solution may be a system that applies dielectrophoretic forces, in addition to microfluidics, to overcome the diffusion limits of conventional biosensors. Dielectrophoresis, which involves the migration of polarized dielectric particles in a non-uniform alternating electric field, has previously been successfully applied to achieve a 1000-fold improved detection efficiency in nanopore sensing and may significantly increase the sensitivity in microring resonator biosensing. In the current work, we designed microring resonators with integrated electrodes next to the sensor surface that may be used to explore the effect of dielectrophoresis. The chip design, including two different electrode configurations, electric field gradient simulations, and the fabrication process flow of a dielectrohoresis-enhanced microring resonator-based sensor, is presented in this paper. Finite element method (FEM) simulations calculated for both electrode configurations revealed ∇E2 values above 1017 V2m−3 around the sensing areas. This is comparable to electric field gradients previously reported for successful interactions with larger molecules, such as proteins and antibodies.


  • Efficient adjustable light couplers of integrated III–V nanowire emitters on silicon waveguides based on ring resonators

    by Mahtab Aghaeipour, Laura Kasper, Jesus Herranz, Lutz Geelhaar, Juergen Bruns

    The development of integrated vertical III–V nanowire (NW) stimulated emitters in silicon photonics while achieving an efficient light coupling through vertical III–V NW lasers into horizontal optical silicon waveguides is demanding. This is mainly due to the directionality and contradiction of the simultaneously satisfied low threshold stimulated emission conditions of the vertical NWs and efficient light coupling from the NW emitters into the horizontal silicon waveguide. However, we propose a new, to the best of our knowledge, design by taking advantage of resonating features of ring structures and theoretically demonstrate that an interfacial ring resonator between GaAs NW emitters and the silicon waveguide achieves a coupling efficiency up to about 70% at a given wavelength. We also show that the interfacial resonator enables us to adjust the coupling efficiency from about 10% to over 70%. The adjustable coupling efficiency might also be a solution to compromise between the low threshold stimulated emission of NWs and efficient light coupling for realizing efficient silicon couplers based on integrated III–V NW lasers in silicon photonics. Besides the simple fabrication process compared to counterparts, we believe that the novel structure is promising for future optical on-chip data communication in silicon photonics, and the results are expandable to varying wavelengths and materials.


  • Photosensitive Field‐Effect Transistors Made from Semiconducting Carbon Nanotubes and Non‐Covalently Attached Gold Nanoparticles

    by Thomas Blaudeck, Andrea Preuß, Sebastian Scharf, Sebastian Notz, Alexander Kossmann, Susanne Hartmann, Laura Kasper, Rafael G. Mendes, Thomas Gemming, Sascha Hermann, et al.

    The authors propose an on‐chip microfluidic flow chemistry for non‐covalent functionalization of single‐walled carbon nanotubes (SWCNTs) as channel material in nanoelectronic carbon‐nanotube field‐effect transistors (CNT‐FETs) specifically aiming for personalized optoplasmonic sensor solutions. Applying pyrene alkanethiol derivatives, dissolved in chloroform, and a dispersion of gold nanoparticles in triglyme, the authors conduct the proof‐of‐principle to fabricate arrays of photosensitive CNT‐FETs using flow chemistry on wafer‐compatible hardware. The spectral photoresponse of the obtained sensor devices appears clear and reproducible and can be related to the surface plasmon polaritons of the gold nanoparticles. The sensor devices yield photometric responsivities of RA ≈ 8 × 10−3 AW−1 and response times of t0 ≈ 9 s. The results extend a previously reported approach for covalent functionalization (Blaudeck et al., Microelectron. Eng. 2015, 137, 135) and show the potential of flow chemistry combined with wafer‐level microfabrication for selectively functionalized nanostructured sensor arrays.


  • Inline characterization of microfluidic APTES functionalization for SOI ring resonator biosensors

    by Laura Kasper, Christoph Kratz, Jürgen Bruns, Rudolf Volkmer, Karsten Hinrichs, Klaus Petermann

    SOI biosensors afford a linkage of biological moieties at the inorganic surface. This paper presents an inline microfluidic approach to functionalize SOI ring resonators by reducing effects of physisorption and 3D-networks.

  • TDM-controlled ring resonator arrays for fast, fixed-wavelength optical biosensing

    by P. Moock, L. Kasper, M. Jäger, D. Stolarek, H. Richter, J. Bruns, K. Petermann

    A novel control concept for serial ring resonator arrays based on a time-division multiplex (TDM) approach is presented. It allows fast sampling rates in terms of biological kinetics. The novelty consists of using both thermal tuning of the effective refractive index and thermo-optical multiplexing for the silicon-on-insulator (SOI) ring resonator arrays, without the need for a tunable laser source. Using a fixed wavelength, fast read-out rates of 100 Hz are demonstrated for each ring.


  • System Design and Energy Management for Indoor Solar Energy Harvesting Under Consideration of Spectral Characteristics of Solar Cells

    by Christian Viehweger, Thomas Keutel, Laura Kasper, Tim Pfeifer, Olfa Kanoun

    A standardized characterization method for solar cells is only available for outdoor use. For the supply of wireless sensor nodes with energy harvesting also indoor applications are of interest. Without comparable values it is difficult to select the proper cell for defined environmental conditions. Therefore it is necessary to make an investigation on their behavior individually to be able to make a selection. The work presented here shows the characterization of solar cells according to their spectral behavior, the influence of illumination and the usage of this information about the maximum power to design an energy management. Therefore a test structure with a monochromator, different light sources, source measure units and instruments for measuring intensity and spectra has been developed. The measurements help to select the best solar cell out of a repertory for indoor energy harvesting applications. As for indoor applications also the ability to make use of weak light and a high efficiency is important, the energy management has been improved using a dual DC/DC strategy that allows it to make efficient use of solar cells within difficult situations.