Nels Thorsteinson
Research Subjects
Nels Thorsteinson has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
Fuqiang Ban
2 shared publications- Geoffrey L. Hammond
Departments of Cellular and Physiological Sciences and Obstetrics and Gynaecology, The University of British Columbia, Vancouver, British Columbia, Canada
2 shared publications Kenneth Kelly
Research and Development, Chemical Computing Group ULC, Montreal, Quebec, Canada
2 shared publications- Osvaldo Andrade Santos Filho
Instituto de Pesquisas de Produtos Naturais Walter Mors, Universidade Federal do Rio de Janeiro, Rio de Janeiro 21941-902, RJ, Brazil
2 shared publications Paul Labute
Research and Development, Chemical Computing Group ULC, Montreal, Quebec, Canada
2 shared publications- Aanal Bhatt
Ginkgo Bioworks, Inc, MA, USA
1 shared publication
Latest Publications
- Top Cited PapersOpen Access
- 22 February 2026
- Published by Taylor & Francis in mAbs
- Vol. 18 (1) , 2634216
2025 Ginkgo Datapoints Antibody Developability Competition outcomes: limited model performance and a call for data standardization
Monoclonal antibodies (mAbs) are among the most successful therapeutic modalities, with over 200 marketed products and nearly 1400 candidates in clinical development.1 While high-affinity binding r...
- 22 February 2026
- Published by Taylor & Francis in mAbs
- Vol. 18 (1) , 2634216
Top Cited PapersOpen Access2025 Ginkgo Datapoints Antibody Developability Competition outcomes: limited model performance and a call for data standardization
Monoclonal antibodies (mAbs) are among the most successful therapeutic modalities, with over 200 marketed products and nearly 1400 candidates in clinical development.1 While high-affinity binding r...
- Open Access
- 3 April 2023
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 120 (15)
Surface patches induce nonspecific binding and phase separation of antibodies
Nonspecific interactions are a key challenge in the successful development of therapeutic antibodies. The tendency for nonspecific binding of antibodies is often difficult to reduce by rational design, and instead, it is necessary to rely on comprehensive screening campaigns. To address this issue, we performed a systematic analysis of the impact of surface patch properties on antibody nonspecificity using a designer antibody library as a model system and single-stranded DNA as a nonspecificity ligand. Using an in-solution microfluidic approach, we find that the antibodies tested bind to single-stranded DNA with affinities as high as K D = 1 µM. We show that DNA binding is driven primarily by a hydrophobic patch in the complementarity-determining regions. By quantifying the surface patches across the library, the nonspecific binding affinity is shown to correlate with a trade-off between the hydrophobic and total charged patch areas. Moreover, we show that a change in formulation conditions at low ionic strengths leads to DNA-induced antibody phase separation as a manifestation of nonspecific binding at low micromolar antibody concentrations. We highlight that phase separation is driven by a cooperative electrostatic network assembly mechanism of antibodies with DNA, which correlates with a balance between positive and negative charged patches. Importantly, our study demonstrates that both nonspecific binding and phase separation are controlled by the size of the surface patches. Taken together, these findings highlight the importance of surface patches and their role in conferring antibody nonspecificity and its macroscopic manifestation in phase separation.
- 3 April 2023
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 120 (15)
Open AccessSurface patches induce nonspecific binding and phase separation of antibodies
Nonspecific interactions are a key challenge in the successful development of therapeutic antibodies. The tendency for nonspecific binding of antibodies is often difficult to reduce by rational design, and instead, it is necessary to rely on comprehensive screening campaigns. To address this issue, we performed a systematic analysis of the impact of surface patch properties on antibody nonspecificity using a designer antibody library as a model system and single-stranded DNA as a nonspecificity ligand. Using an in-solution microfluidic approach, we find that the antibodies tested bind to single-stranded DNA with affinities as high as K D = 1 µM. We show that DNA binding is driven primarily by a hydrophobic patch in the complementarity-determining regions. By quantifying the surface patches across the library, the nonspecific binding affinity is shown to correlate with a trade-off between the hydrophobic and total charged patch areas. Moreover, we show that a change in formulation conditions at low ionic strengths leads to DNA-induced antibody phase separation as a manifestation of nonspecific binding at low micromolar antibody concentrations. We highlight that phase separation is driven by a cooperative electrostatic network assembly mechanism of antibodies with DNA, which correlates with a balance between positive and negative charged patches. Importantly, our study demonstrates that both nonspecific binding and phase separation are controlled by the size of the surface patches. Taken together, these findings highlight the importance of surface patches and their role in conferring antibody nonspecificity and its macroscopic manifestation in phase separation.
- Open Access
- 1 January 2021
- Published by Taylor & Francis in mAbs
- Vol. 13 (1) , 1981805
Structure-based charge calculations for predicting isoelectric point, viscosity, clearance, and profiling antibody therapeutics
The effect of hydrophobicity on antibody aggregation is well understood, and it has been shown that charge calculations can be useful for high-concentration viscosity and pharmacokinetic (PK) clearance predictions. In this work, structure-based charge descriptors are evaluated for their predictive performance on recently published antibody pI, viscosity, and clearance data. From this, we devised four rules for therapeutic antibody profiling which address developability issues arising from hydrophobicity and charged-based solution behavior, PK, and the ability to enrich for those that are approved by the U.S. Food and Drug Administration. Differences in strategy for optimizing the solution behavior of human IgG1 antibodies versus the IgG2 and IgG4 isotypes and the impact of pH alterations in formulation are discussed.
- 1 January 2021
- Published by Taylor & Francis in mAbs
- Vol. 13 (1) , 1981805
Open AccessStructure-based charge calculations for predicting isoelectric point, viscosity, clearance, and profiling antibody therapeutics
The effect of hydrophobicity on antibody aggregation is well understood, and it has been shown that charge calculations can be useful for high-concentration viscosity and pharmacokinetic (PK) clearance predictions. In this work, structure-based charge descriptors are evaluated for their predictive performance on recently published antibody pI, viscosity, and clearance data. From this, we devised four rules for therapeutic antibody profiling which address developability issues arising from hydrophobicity and charged-based solution behavior, PK, and the ability to enrich for those that are approved by the U.S. Food and Drug Administration. Differences in strategy for optimizing the solution behavior of human IgG1 antibodies versus the IgG2 and IgG4 isotypes and the impact of pH alterations in formulation are discussed.
- Open Access
- 15 August 2018
- Published by Taylor & Francis in mAbs
- Vol. 10 (6) , 890-900
Homology modeling and structure-based design improve hydrophobic interaction chromatography behavior of integrin binding antibodies
Monoclonal antibody (mAb) candidates from high-throughput screening or binding affinity optimization often contain mutations leading to liabilities for further development of the antibody, such as aggregation-prone regions and lack of solubility. In this work, we optimized a candidate integrin α11-binding mAb for developability using molecular modeling, rational design, and hydrophobic interaction chromatography (HIC). A homology model of the parental mAb Fv region was built, and this revealed hydrophobic patches on the surface of the complementarity-determining region loops. A series of 97 variants of the residues primarily responsible for the hydrophobic patches were expressed and their HIC retention times (RT) were measured. As intended, many of the computationally designed variants reduced the HIC RT compared to the parental mAb, and mutating residues that contributed most to hydrophobic patches had the greatest effect on HIC RT. A retrospective analysis was then performed where 3-dimentional protein property descriptors were evaluated for their ability to predict HIC RT using the current series of mAbs. The same descriptors were used to train a simple multi-parameter protein quantitative structure-property relationship model on this data, producing an improved correlation. We also extended this analysis to recently published HIC data for 137 clinical mAb candidates as well as 31 adnectin variants, and found that the surface area of hydrophobic patches averaged over a molecular dynamics sample consistently correlated to the experimental data across a diverse set of biotherapeutics.
- 15 August 2018
- Published by Taylor & Francis in mAbs
- Vol. 10 (6) , 890-900
Open AccessHomology modeling and structure-based design improve hydrophobic interaction chromatography behavior of integrin binding antibodies
Monoclonal antibody (mAb) candidates from high-throughput screening or binding affinity optimization often contain mutations leading to liabilities for further development of the antibody, such as aggregation-prone regions and lack of solubility. In this work, we optimized a candidate integrin α11-binding mAb for developability using molecular modeling, rational design, and hydrophobic interaction chromatography (HIC). A homology model of the parental mAb Fv region was built, and this revealed hydrophobic patches on the surface of the complementarity-determining region loops. A series of 97 variants of the residues primarily responsible for the hydrophobic patches were expressed and their HIC retention times (RT) were measured. As intended, many of the computationally designed variants reduced the HIC RT compared to the parental mAb, and mutating residues that contributed most to hydrophobic patches had the greatest effect on HIC RT. A retrospective analysis was then performed where 3-dimentional protein property descriptors were evaluated for their ability to predict HIC RT using the current series of mAbs. The same descriptors were used to train a simple multi-parameter protein quantitative structure-property relationship model on this data, producing an improved correlation. We also extended this analysis to recently published HIC data for 137 clinical mAb candidates as well as 31 adnectin variants, and found that the surface area of hydrophobic patches averaged over a molecular dynamics sample consistently correlated to the experimental data across a diverse set of biotherapeutics.
- 8 July 2015
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 55 (7) , 1460-1468
Knowledge-Based Strategy to Improve Ligand Pose Prediction Accuracy for Lead Optimization
Accurately predicting how a small molecule binds to its target protein is an essential requirement for structure-based drug design (SBDD) efforts. In structurally enabled medicinal chemistry programs, binding pose prediction is often applied to ligands after a related compound’s crystal structure bound to the target protein has been solved. In this article, we present an automated pose prediction protocol that makes extensive use of existing X-ray ligand information. It uses spatial restraints during docking based on maximum common substructure (MCS) overlap between candidate molecule and existing X-ray coordinates of the related compound. For a validation data set of 8784 docking runs, our protocol’s pose prediction accuracy (80–82%) is almost two times higher than that of one unbiased docking method software (43%). To demonstrate the utility of this protocol in a project setting, we show its application in a chronological manner for a number of internal drug discovery efforts. The accuracy and applicability of this algorithm (>70% of cases) to medicinal chemistry efforts make this the approach of choice for pose prediction in lead optimization programs.
- 8 July 2015
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 55 (7) , 1460-1468
Knowledge-Based Strategy to Improve Ligand Pose Prediction Accuracy for Lead Optimization
Accurately predicting how a small molecule binds to its target protein is an essential requirement for structure-based drug design (SBDD) efforts. In structurally enabled medicinal chemistry programs, binding pose prediction is often applied to ligands after a related compound’s crystal structure bound to the target protein has been solved. In this article, we present an automated pose prediction protocol that makes extensive use of existing X-ray ligand information. It uses spatial restraints during docking based on maximum common substructure (MCS) overlap between candidate molecule and existing X-ray coordinates of the related compound. For a validation data set of 8784 docking runs, our protocol’s pose prediction accuracy (80–82%) is almost two times higher than that of one unbiased docking method software (43%). To demonstrate the utility of this protocol in a project setting, we show its application in a chronological manner for a number of internal drug discovery efforts. The accuracy and applicability of this algorithm (>70% of cases) to medicinal chemistry efforts make this the approach of choice for pose prediction in lead optimization programs.
- 22 July 2011
- Published by Wiley in Proteins: Structure, Function, and Bioinformatics
- Vol. 79 (11) , 3050-3066
Antibody modeling assessment
A blinded study to assess the state of the art in three‐dimensional structure modeling of the variable region (Fv) of antibodies was conducted. Nine unpublished high‐resolution x‐ray Fab crystal structures covering a wide range of antigen‐binding site conformations were used as benchmark to compare Fv models generated by four structure prediction methodologies. The methodologies included two homology modeling strategies independently developed by CCG (Chemical Computer Group) and Accerlys Inc, and two fully automated antibody modeling servers: PIGS (Prediction of ImmunoGlobulin Structure), based on the canonical structure model, and Rosetta Antibody Modeling, based on homology modeling and Rosetta structure prediction methodology. The benchmark structure sequences were submitted to Accelrys and CCG and a set of models for each of the nine antibody structures were generated. PIGS and Rosetta models were obtained using the default parameters of the servers. In most cases, we found good agreement between the models and x‐ray structures. The average rmsd (root mean square deviation) values calculated over the backbone atoms between the models and structures were fairly consistent, around 1.2 Å. Average rmsd values of the framework and hypervariable loops with canonical structures (L1, L2, L3, H1, and H2) were close to 1.0 Å. H3 prediction yielded rmsd values around 3.0 Å for most of the models. Quality assessment of the models and the relative strengths and weaknesses of the methods are discussed. We hope this initiative will serve as a model of scientific partnership and look forward to future antibody modeling assessments. Proteins 2011;
- 22 July 2011
- Published by Wiley in Proteins: Structure, Function, and Bioinformatics
- Vol. 79 (11) , 3050-3066
Antibody modeling assessment
A blinded study to assess the state of the art in three‐dimensional structure modeling of the variable region (Fv) of antibodies was conducted. Nine unpublished high‐resolution x‐ray Fab crystal structures covering a wide range of antigen‐binding site conformations were used as benchmark to compare Fv models generated by four structure prediction methodologies. The methodologies included two homology modeling strategies independently developed by CCG (Chemical Computer Group) and Accerlys Inc, and two fully automated antibody modeling servers: PIGS (Prediction of ImmunoGlobulin Structure), based on the canonical structure model, and Rosetta Antibody Modeling, based on homology modeling and Rosetta structure prediction methodology. The benchmark structure sequences were submitted to Accelrys and CCG and a set of models for each of the nine antibody structures were generated. PIGS and Rosetta models were obtained using the default parameters of the servers. In most cases, we found good agreement between the models and x‐ray structures. The average rmsd (root mean square deviation) values calculated over the backbone atoms between the models and structures were fairly consistent, around 1.2 Å. Average rmsd values of the framework and hypervariable loops with canonical structures (L1, L2, L3, H1, and H2) were close to 1.0 Å. H3 prediction yielded rmsd values around 3.0 Å for most of the models. Quality assessment of the models and the relative strengths and weaknesses of the methods are discussed. We hope this initiative will serve as a model of scientific partnership and look forward to future antibody modeling assessments. Proteins 2011;
- 1 January 2009
- Published by Elsevier in Toxicology and Applied Pharmacology
- Vol. 234 (1) , 47-57
In silico identification of anthropogenic chemicals as ligands of zebrafish sex hormone binding globulin
- 1 January 2009
- Published by Elsevier in Toxicology and Applied Pharmacology
- Vol. 234 (1) , 47-57
In silico identification of anthropogenic chemicals as ligands of zebrafish sex hormone binding globulin
- 11 March 2008
- Published by American Chemical Society (ACS) in Journal of Medicinal Chemistry
- Vol. 51 (7) , 2047-2056
An Updated Steroid Benchmark Set and Its Application in the Discovery of Novel Nanomolar Ligands of Sex Hormone-Binding Globulin
A benchmark data set of steroids with known affinity for sex hormone-binding globulin (SHBG) has been widely used to validate popular molecular field-based QSAR techniques. We have expanded the data set by adding a number of nonsteroidal SHBG ligands identified both from the literature and in our previous experimental studies. This updated molecular set has been used herein to develop 4D QSAR models based on "inductive" descriptors and to gain insight into the molecular basis of protein-ligand interactions. Molecular alignment was generated by means of docking active compounds into the active site of the SHBG. Surprisingly, the alignment of the benchmark steroids contradicted the classical ligand-based alignment utilized in previous CoMFA and CoMSIA models yet afforded models with higher statistical significance and predictive power. The resulting QSAR models combined with CoMFA and CoMSiA models as well as structure-based virtual screening allowed discovering several low-micromolar to nanomolar nonsteroidal inhibitors for human SHBG.
- 11 March 2008
- Published by American Chemical Society (ACS) in Journal of Medicinal Chemistry
- Vol. 51 (7) , 2047-2056
An Updated Steroid Benchmark Set and Its Application in the Discovery of Novel Nanomolar Ligands of Sex Hormone-Binding Globulin
A benchmark data set of steroids with known affinity for sex hormone-binding globulin (SHBG) has been widely used to validate popular molecular field-based QSAR techniques. We have expanded the data set by adding a number of nonsteroidal SHBG ligands identified both from the literature and in our previous experimental studies. This updated molecular set has been used herein to develop 4D QSAR models based on "inductive" descriptors and to gain insight into the molecular basis of protein-ligand interactions. Molecular alignment was generated by means of docking active compounds into the active site of the SHBG. Surprisingly, the alignment of the benchmark steroids contradicted the classical ligand-based alignment utilized in previous CoMFA and CoMSIA models yet afforded models with higher statistical significance and predictive power. The resulting QSAR models combined with CoMFA and CoMSiA models as well as structure-based virtual screening allowed discovering several low-micromolar to nanomolar nonsteroidal inhibitors for human SHBG.