Mehmet Tokatli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mehmet Tokatli has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Hilal Isleroglu
Faculty of Engineering and Architecture, Food Engineering Department Tokat Gaziosmanpasa University Tokat Turkey
3 shared publications - Izzet Turker
Faculty of Engineering and Architecture, Food Engineering Department Tokat Gaziosmanpasa University Tokat Turkey
3 shared publications - Banu Koç
Gastronomy and Culinary Arts Department, Faculty of Tourism, Gaziantep University, Gaziantep 27310, Türkiye
2 shared publications - Özgül Yazar
Department of Food Engineering, Faculty of Engineering and Architecture, Tokat Gaziosmanpaşa University, 60250 Tokat, Türkiye
2 shared publications Gokhan Domurcuk
1 shared publication- Işık Hazal Küpcü
Tokat Gaziosmanpaşa Üniversitesi
1 shared publication
Latest Publications
- Open Access
- 13 November 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (22) , 1466
Comparative Physicochemical Characterization and Functional Evaluation of Lactic Acid Bacteria-Derived Iron- and Silver-Based Nanoparticles
Lactic acid bacteria (LAB)-derived nanoparticles (NPs) may differ from commercial reference materials in their physicochemical and functional properties. This study evaluated biogenic iron- and silver-based NP preparations and selected commercial counterparts for antimicrobial and antioxidant activities, liquid-phase antibiotic concentration reduction, and physicochemical characteristics. Functional performance was assessed using disk diffusion, DPPH, FRAP, and aqueous penicillin G and tetracycline hydrochloride assays. Selected NPs were characterized by SEM, FESEM-EDX, XRD, FTIR, and zeta-potential analysis. Antimicrobial activity was observed only for AgNPs, with biogenic AgNPs preparations generally producing larger inhibition zones than commercial AgNPs. Lenb-AgNP showed the highest numerical DPPH activity among NP preparations (73.0%), while Levn-AgNP and Pe-AgNP exhibited the highest FRAP values (270.0 and 264.0 µg TE/mL, respectively). Com-AgNP produced the highest measured penicillin G concentration reduction (93.3%), whereas Pe-FeNP achieved 89.2%, the highest value among biogenic Fe-based preparations. Levn-AgNP yielded the highest tetracycline hydrochloride concentration reduction (91.5%). Microscopy showed predominantly quasi-spherical biogenic NPs, and complementary analyses revealed differences in structural order, elemental composition, FTIR spectral features, and electrokinetic properties. These findings demonstrate formulation-dependent functional and physicochemical differences, although the mechanisms underlying antibiotic concentration reductions remain unresolved.
- 13 November 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (22) , 1466
Open AccessComparative Physicochemical Characterization and Functional Evaluation of Lactic Acid Bacteria-Derived Iron- and Silver-Based Nanoparticles
Lactic acid bacteria (LAB)-derived nanoparticles (NPs) may differ from commercial reference materials in their physicochemical and functional properties. This study evaluated biogenic iron- and silver-based NP preparations and selected commercial counterparts for antimicrobial and antioxidant activities, liquid-phase antibiotic concentration reduction, and physicochemical characteristics. Functional performance was assessed using disk diffusion, DPPH, FRAP, and aqueous penicillin G and tetracycline hydrochloride assays. Selected NPs were characterized by SEM, FESEM-EDX, XRD, FTIR, and zeta-potential analysis. Antimicrobial activity was observed only for AgNPs, with biogenic AgNPs preparations generally producing larger inhibition zones than commercial AgNPs. Lenb-AgNP showed the highest numerical DPPH activity among NP preparations (73.0%), while Levn-AgNP and Pe-AgNP exhibited the highest FRAP values (270.0 and 264.0 µg TE/mL, respectively). Com-AgNP produced the highest measured penicillin G concentration reduction (93.3%), whereas Pe-FeNP achieved 89.2%, the highest value among biogenic Fe-based preparations. Levn-AgNP yielded the highest tetracycline hydrochloride concentration reduction (91.5%). Microscopy showed predominantly quasi-spherical biogenic NPs, and complementary analyses revealed differences in structural order, elemental composition, FTIR spectral features, and electrokinetic properties. These findings demonstrate formulation-dependent functional and physicochemical differences, although the mechanisms underlying antibiotic concentration reductions remain unresolved.
- 3 December 2025
- Published by Kahramanmaras Sutcu Imam University Journal of Engineering Sciences in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 28 (4) , 1916-1927
MİKROBİYAL NANOPARTİKÜL SENTEZİNDE YEREL LAKTİK ASİT BAKTERİ SUŞLARININ POTANSİYELİNİN BELİRLENMESİ
Bu çalışmada laktik asit bakteri (LAB) suşlarının K2TiF6 ve TiO2, Fe2O3, FeCl3, AgNO3 ve dAgNO3 metal öncüleri kullanılarak mikrobiyal titanyum, demir ve gümüş metal nanopartikül (NP) sentezleme potansiyelleri belirlenmiştir. Bunun için 141 LAB suşunun farklı konsantrasyonlarda (0.02-0.2M) metal öncü içeren MRS-Agar besiyerlerinde gelişimleri izlenerek metal öncülere direnç gösteren 24 LAB suşu belirlenmiştir. Daha sonra 24 LAB suşunun hücre ekstraktını da içeren kültür ortamlarına metal öncü çözeltisi (0.01M) ilave edilerek nanopartikül sentezi için 30˚C’de 24 saat boyunca inkübasyona bırakılmıştır. Metal öncü katkılı MRS-Agar besiyerinde direnç göstererek geliştiği belirlenen 24 LAB (Levilactobacillus brevis, Lactiplantibacillus plantarum, Pediococcus ethanolidurans, Lactobacillus buchneri, Pediococcus parvulus, Lactiplantibacillus namurensis, Lactiplantibacillus diolivoran, Lacticaseibacillus parabrevis) suşu ile NP sentezinin belirlenmesi için gerçekleştirilen spektrum tarama sonuçlarına göre; FeNP için 4.5-34.1; AgNP için 2.2-39.1 ve TiNP için 3.0-37.8 aralığında absorbans değerleri ölçülmüştür. NP sentezinde en yüksek absorbans değerlerinin ölçüldüğü LAB suşları sırasıyla; AgNP için L. namurensis MF112 (39.1 ABS), TiNP için P. ethanolidurans MF115 (37.8 ABS) ve FeNP için L. namurensis MF112 (34.1 ABS) olarak tespit edilmiştir. Bu suşların metal öncülerden NP sentezleme potansiyelinin olabileceği tespit edilmiştir. Çalışma sonucunda elde edilen veriler uygun LAB suşlarının kullanımı ile mikrobiyal NP üretimi optimizasyonu ve NP karakterizasyonu gibi daha ileri çalışmalara ışık tutacağı ön görülmektedir.
- 3 December 2025
- Published by Kahramanmaras Sutcu Imam University Journal of Engineering Sciences in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 28 (4) , 1916-1927
MİKROBİYAL NANOPARTİKÜL SENTEZİNDE YEREL LAKTİK ASİT BAKTERİ SUŞLARININ POTANSİYELİNİN BELİRLENMESİ
Bu çalışmada laktik asit bakteri (LAB) suşlarının K2TiF6 ve TiO2, Fe2O3, FeCl3, AgNO3 ve dAgNO3 metal öncüleri kullanılarak mikrobiyal titanyum, demir ve gümüş metal nanopartikül (NP) sentezleme potansiyelleri belirlenmiştir. Bunun için 141 LAB suşunun farklı konsantrasyonlarda (0.02-0.2M) metal öncü içeren MRS-Agar besiyerlerinde gelişimleri izlenerek metal öncülere direnç gösteren 24 LAB suşu belirlenmiştir. Daha sonra 24 LAB suşunun hücre ekstraktını da içeren kültür ortamlarına metal öncü çözeltisi (0.01M) ilave edilerek nanopartikül sentezi için 30˚C’de 24 saat boyunca inkübasyona bırakılmıştır. Metal öncü katkılı MRS-Agar besiyerinde direnç göstererek geliştiği belirlenen 24 LAB (Levilactobacillus brevis, Lactiplantibacillus plantarum, Pediococcus ethanolidurans, Lactobacillus buchneri, Pediococcus parvulus, Lactiplantibacillus namurensis, Lactiplantibacillus diolivoran, Lacticaseibacillus parabrevis) suşu ile NP sentezinin belirlenmesi için gerçekleştirilen spektrum tarama sonuçlarına göre; FeNP için 4.5-34.1; AgNP için 2.2-39.1 ve TiNP için 3.0-37.8 aralığında absorbans değerleri ölçülmüştür. NP sentezinde en yüksek absorbans değerlerinin ölçüldüğü LAB suşları sırasıyla; AgNP için L. namurensis MF112 (39.1 ABS), TiNP için P. ethanolidurans MF115 (37.8 ABS) ve FeNP için L. namurensis MF112 (34.1 ABS) olarak tespit edilmiştir. Bu suşların metal öncülerden NP sentezleme potansiyelinin olabileceği tespit edilmiştir. Çalışma sonucunda elde edilen veriler uygun LAB suşlarının kullanımı ile mikrobiyal NP üretimi optimizasyonu ve NP karakterizasyonu gibi daha ileri çalışmalara ışık tutacağı ön görülmektedir.
- 30 August 2025
- Published by Gaziosmanpasa University in Journal of Agricultural Faculty of Gaziosmanpasa University
- Vol. 42 (2) , 167-175
Investigation of physicochemical properties of some milk jams sold in the market
This study aimed to examine the physicochemical properties of 30 different cow milk jams purchased from the market to identify variations among these products, which lack a production standard. For this purpose, milk jams were examined in terms of pH, titratable acidity, total soluble solids, water activity, color properties (L*, a*, and b*), hydroxymethylfurfural, total sugar, fat and protein. The pH values of milk jam samples were found to be 5.33-7.30, whereas titratable acidity values were 0.057-0.884% (as lactic acid). Similarly, water soluble solids contents were 46.83-82.57 °Brix, while water activity values were 0.717-0.928. In the same way, total sugar contents were 21.39-58.87 g/100g, whereas fat contents were 0.27-4.63%. Likewise, protein contents were %0.73-5.02. The L* values ranged from 21.39-67.17, while a* values varied between -2.98-11.06 and b* values varied between -3.30-18.78. While HMF was not found in 16 of the samples, HMF was determined in the range of 2.97-221.29 mg/kg in the remaining 14 samples. The study revealed that the compositions of milk jams varied and that they were not produced to a certain standard.
- 30 August 2025
- Published by Gaziosmanpasa University in Journal of Agricultural Faculty of Gaziosmanpasa University
- Vol. 42 (2) , 167-175
Investigation of physicochemical properties of some milk jams sold in the market
This study aimed to examine the physicochemical properties of 30 different cow milk jams purchased from the market to identify variations among these products, which lack a production standard. For this purpose, milk jams were examined in terms of pH, titratable acidity, total soluble solids, water activity, color properties (L*, a*, and b*), hydroxymethylfurfural, total sugar, fat and protein. The pH values of milk jam samples were found to be 5.33-7.30, whereas titratable acidity values were 0.057-0.884% (as lactic acid). Similarly, water soluble solids contents were 46.83-82.57 °Brix, while water activity values were 0.717-0.928. In the same way, total sugar contents were 21.39-58.87 g/100g, whereas fat contents were 0.27-4.63%. Likewise, protein contents were %0.73-5.02. The L* values ranged from 21.39-67.17, while a* values varied between -2.98-11.06 and b* values varied between -3.30-18.78. While HMF was not found in 16 of the samples, HMF was determined in the range of 2.97-221.29 mg/kg in the remaining 14 samples. The study revealed that the compositions of milk jams varied and that they were not produced to a certain standard.
- 16 October 2019
- Published by Springer Nature in Journal of Food Science and Technology
- Vol. 56 (11) , 4925-4937
Optimization of microencapsulation conditions of transglutaminase by freeze drying
Transglutaminase (TG), which is an important enzyme for food processing, can enhance the firmness, viscosity and water binding capacity of food products by catalyzing the cross-linking reaction of proteins. Since preservation of the enzyme activity is essential, the production of microencapsulated powder form of TG can be a great challenge to maintain its initial activity. In this study, TG was microencapsulated using a freeze drying technique and the effects of homogenization conditions and coating material ratios on the enzyme activity were investigated using D-optimal combined design. Mannitol, gum arabic and casein were chosen as coating materials and different homogenization times (1–5 min) and homogenization rates (11,200–20,000 rpm) were applied. The optimum conditions which ensure the maximum enzyme activity have been determined as 11,200 rpm of homogenization rate, 1.27 min of homogenization time, and in addition a mixture of mannitol, gum arabic and casein with ratios 38.2, 40.2, and 21.6%, respectively. Most of the activity loss occurred in the homogenization stage and the coating materials preserved enzyme activity during freeze drying. At the optimum point, the remaining activity of the microencapsulated TG was 93% while that of the crude (without coating materials) TG was 64% at the same drying conditions. Moreover, the effects of the microencapsulation conditions on the physical properties of powder such as moisture content, color, particle, bulk and tapped densities, porosity and flowability were determined.
- 16 October 2019
- Published by Springer Nature in Journal of Food Science and Technology
- Vol. 56 (11) , 4925-4937
Optimization of microencapsulation conditions of transglutaminase by freeze drying
Transglutaminase (TG), which is an important enzyme for food processing, can enhance the firmness, viscosity and water binding capacity of food products by catalyzing the cross-linking reaction of proteins. Since preservation of the enzyme activity is essential, the production of microencapsulated powder form of TG can be a great challenge to maintain its initial activity. In this study, TG was microencapsulated using a freeze drying technique and the effects of homogenization conditions and coating material ratios on the enzyme activity were investigated using D-optimal combined design. Mannitol, gum arabic and casein were chosen as coating materials and different homogenization times (1–5 min) and homogenization rates (11,200–20,000 rpm) were applied. The optimum conditions which ensure the maximum enzyme activity have been determined as 11,200 rpm of homogenization rate, 1.27 min of homogenization time, and in addition a mixture of mannitol, gum arabic and casein with ratios 38.2, 40.2, and 21.6%, respectively. Most of the activity loss occurred in the homogenization stage and the coating materials preserved enzyme activity during freeze drying. At the optimum point, the remaining activity of the microencapsulated TG was 93% while that of the crude (without coating materials) TG was 64% at the same drying conditions. Moreover, the effects of the microencapsulation conditions on the physical properties of powder such as moisture content, color, particle, bulk and tapped densities, porosity and flowability were determined.
- 1 August 2017
- Published by Elsevier in Journal of Biotechnology
- Vol. 256, S67
Protein cross linker enzymes and food applications
- 1 August 2017
- Published by Elsevier in Journal of Biotechnology
- Vol. 256, S67
Protein cross linker enzymes and food applications
- 1 August 2017
- Published by Elsevier in Journal of Biotechnology
- Vol. 256, S65
Microbial transglutaminase production using industrial food wastes
- 1 August 2017
- Published by Elsevier in Journal of Biotechnology
- Vol. 256, S65
Microbial transglutaminase production using industrial food wastes