David A. Bender
David A. Bender has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Joel M. Galloway2 shared publications
John S. Zogorski
2 shared publicationsWilliam E. Asher
2 shared publications- Bruce D. Smith
Department of Electrical and Computer Engineering, University of Texas at San Antonio, San Antonio, TX, 48129 USA
1 shared publication - Colton J. Medler1 shared publication
Daniel G. Driscoll
1 shared publication
Latest Publications
- 1 January 2022
- Published by US Geological Survey
Potential effects of energy development on environmental resources of the Williston Basin in Montana, North Dakota, and South Dakota—Water resources
The Williston Basin has been a leading oil and gas producing area for more than 50 years. While oil production initially peaked within the Williston Basin in the mid-1980s, production rapidly increased in the mid-2000s, largely because of improved horizontal (directional) drilling and hydraulic fracturing methods. In 2012, energy development associated with the Bakken Formation was identified as a priority requiring collaboration toward improved timeliness of issuing permits for new wells combined with reasonable measures to maintain environmental quality. Shortly thereafter, the Bakken Federal Executive Group was created to address common challenges associated with energy development. The Bakken Federal Executive Group partner agencies identified a gap in current understanding of the cumulative environmental challenges attributed to energy development throughout the area, resulting in an effort to aggregate scientific data and identify additional research and information needs related to natural resources within areas of energy development in the Williston Basin. As part of this effort, water resources in the area (including groundwater; streams and rivers; and lakes, reservoirs, and wetlands) were characterized and described in terms of physical occurrence, flow characteristics, recharge, water quality, and water use. Similarly, waters produced during energy-development activities also were characterized even though these waters are not considered usable resources within the area. Groundwater resources were characterized by the major hydrogeologic units, or aquifers, identifying the units that supply most groundwater used for domestic, stock, agricultural, and industrial purposes. The groundwater characterization included other deeper hydrogeologic units in the Williston Basin that may be a useable source of water with treatment, have utility as a reservoir for reinjection of produced waters, or be a source of minerals and energy resources. A generalized groundwater budget and flow system identifying the sources of recharge (stream infiltration, precipitation, and movement [leakage] from other aquifers) and the general groundwater flow direction is included for each of the major hydrogeologic units. Rivers and streams within the Williston Basin with 10 or more years of continuous streamflow data were identified. For a subset of these sites, streamflow characteristics, including the monthly and annual mean flow, were generated to identify seasonal and interannual changes in streamflow and thus provide information on the drivers and reliability of streamflow at the seasonal or multiyear scale. Daily streamflow and annual extreme flows (peak and low flow) also were estimated for the subset of sites. The daily streamflow and annual extreme flow values provide information on short-term or extreme events that are relevant to infrastructure design and evaluating spills, leaks, or accidental discharges of water or petroleum products. Surface-water features (lakes, ponds, and wetlands) were classified using the Cowardin system and identified on the National Wetlands Inventory maps generated by the U.S. Fish and Wildlife Service. The spatial distribution of the surface-water features was analyzed by State, county, and specifically in comparison to the Prairie Pothole Region. The proximity of the surface-water features to energy development infrastructure (specifically oil or gas well pads) was evaluated. It was determined that, although oil or gas wells are often near a surface-water feature, most surface-water features do not have wells nearby, with the exception of wells in the Prairie Pothole Region. Water-quality data were aggregated from two data sources: (1) the Water-Quality Portal, sponsored by the U.S. Geological Survey (USGS), U.S. Environmental Protection Agency (EPA), and National Water Quality Monitoring Council; and (2) a data compilation completed as part of the USGS National Water-Quality Assessment project. The Water-Quality Portal integrates publicly available water-quality data from databases maintained by the USGS, EPA, and U.S. Department of Agriculture, including water-quality data from Tribal, State, and local databases. Water-quality data for 15 commonly measured water-quality constituents were aggregated for groundwater, rivers and streams, and lakes and reservoirs. For each aggregated dataset (groundwater, rivers and streams, and lakes and reservoirs), analyses of the water-quality data included summary statistics, maps of spatial distribution of constituent values, boxplots of constituent values by timeframe or hydrogeologic unit, spatial comparisons of site locations and constituent values to petroleum well density, and comparisons of the constituent values measured to EPA drinking-water standards/guidelines. Produced water includes all fluids brought to the surface along with the targeted hydrocarbons as part of the oil and gas exploration and extraction processes. These fluids may include formation water (waters that co-exist with rock/oil/gas), hydraulic fracturing fluids, and other combinations of water and chemicals used during oil and gas well drilling, development, treatments, recompletions, and workovers. Produced water datasets were aggregated from two sources: the USGS National Produced Waters Geochemical database (ver. 2.1) and a series of projects focused specifically on sampling produced water in the Williston Basin from 2010 to 2014. The National Produced Waters Geochemical database was useful for a general understanding of produced-water chemistry. Produced waters are characterized by extreme salinity and contain elevated concentrations of other constituents (including arsenic, barium, cadmium, lead, zinc, radium-226/radium-228, and ammonia) that could negatively affect water and aquatic resources if released. Produced waters also have a generally unique chemical (isotopic) signature that may be useful in tracking water from different geologic...
- 1 January 2022
- Published by US Geological Survey
Potential effects of energy development on environmental resources of the Williston Basin in Montana, North Dakota, and South Dakota—Water resources
The Williston Basin has been a leading oil and gas producing area for more than 50 years. While oil production initially peaked within the Williston Basin in the mid-1980s, production rapidly increased in the mid-2000s, largely because of improved horizontal (directional) drilling and hydraulic fracturing methods. In 2012, energy development associated with the Bakken Formation was identified as a priority requiring collaboration toward improved timeliness of issuing permits for new wells combined with reasonable measures to maintain environmental quality. Shortly thereafter, the Bakken Federal Executive Group was created to address common challenges associated with energy development. The Bakken Federal Executive Group partner agencies identified a gap in current understanding of the cumulative environmental challenges attributed to energy development throughout the area, resulting in an effort to aggregate scientific data and identify additional research and information needs related to natural resources within areas of energy development in the Williston Basin. As part of this effort, water resources in the area (including groundwater; streams and rivers; and lakes, reservoirs, and wetlands) were characterized and described in terms of physical occurrence, flow characteristics, recharge, water quality, and water use. Similarly, waters produced during energy-development activities also were characterized even though these waters are not considered usable resources within the area. Groundwater resources were characterized by the major hydrogeologic units, or aquifers, identifying the units that supply most groundwater used for domestic, stock, agricultural, and industrial purposes. The groundwater characterization included other deeper hydrogeologic units in the Williston Basin that may be a useable source of water with treatment, have utility as a reservoir for reinjection of produced waters, or be a source of minerals and energy resources. A generalized groundwater budget and flow system identifying the sources of recharge (stream infiltration, precipitation, and movement [leakage] from other aquifers) and the general groundwater flow direction is included for each of the major hydrogeologic units. Rivers and streams within the Williston Basin with 10 or more years of continuous streamflow data were identified. For a subset of these sites, streamflow characteristics, including the monthly and annual mean flow, were generated to identify seasonal and interannual changes in streamflow and thus provide information on the drivers and reliability of streamflow at the seasonal or multiyear scale. Daily streamflow and annual extreme flows (peak and low flow) also were estimated for the subset of sites. The daily streamflow and annual extreme flow values provide information on short-term or extreme events that are relevant to infrastructure design and evaluating spills, leaks, or accidental discharges of water or petroleum products. Surface-water features (lakes, ponds, and wetlands) were classified using the Cowardin system and identified on the National Wetlands Inventory maps generated by the U.S. Fish and Wildlife Service. The spatial distribution of the surface-water features was analyzed by State, county, and specifically in comparison to the Prairie Pothole Region. The proximity of the surface-water features to energy development infrastructure (specifically oil or gas well pads) was evaluated. It was determined that, although oil or gas wells are often near a surface-water feature, most surface-water features do not have wells nearby, with the exception of wells in the Prairie Pothole Region. Water-quality data were aggregated from two data sources: (1) the Water-Quality Portal, sponsored by the U.S. Geological Survey (USGS), U.S. Environmental Protection Agency (EPA), and National Water Quality Monitoring Council; and (2) a data compilation completed as part of the USGS National Water-Quality Assessment project. The Water-Quality Portal integrates publicly available water-quality data from databases maintained by the USGS, EPA, and U.S. Department of Agriculture, including water-quality data from Tribal, State, and local databases. Water-quality data for 15 commonly measured water-quality constituents were aggregated for groundwater, rivers and streams, and lakes and reservoirs. For each aggregated dataset (groundwater, rivers and streams, and lakes and reservoirs), analyses of the water-quality data included summary statistics, maps of spatial distribution of constituent values, boxplots of constituent values by timeframe or hydrogeologic unit, spatial comparisons of site locations and constituent values to petroleum well density, and comparisons of the constituent values measured to EPA drinking-water standards/guidelines. Produced water includes all fluids brought to the surface along with the targeted hydrocarbons as part of the oil and gas exploration and extraction processes. These fluids may include formation water (waters that co-exist with rock/oil/gas), hydraulic fracturing fluids, and other combinations of water and chemicals used during oil and gas well drilling, development, treatments, recompletions, and workovers. Produced water datasets were aggregated from two sources: the USGS National Produced Waters Geochemical database (ver. 2.1) and a series of projects focused specifically on sampling produced water in the Williston Basin from 2010 to 2014. The National Produced Waters Geochemical database was useful for a general understanding of produced-water chemistry. Produced waters are characterized by extreme salinity and contain elevated concentrations of other constituents (including arsenic, barium, cadmium, lead, zinc, radium-226/radium-228, and ammonia) that could negatively affect water and aquatic resources if released. Produced waters also have a generally unique chemical (isotopic) signature that may be useful in tracking water from different geologic...
- 1 January 2021
- Published by US Geological Survey in Scientific Investigations Report
Groundwater assessment for petroleum hydrocarbon compounds associated with Fuels Area C, Ellsworth Air Force Base, South Dakota, 2014–18
First posted August 2, 2021 Director, Dakota Water Science CenterU.S. Geological Survey821 East Interstate AvenueBismarck, ND 585031608 Mountain View RoadRapid City, SD 57702 In 2013, the U.S. Geological Survey began a study in cooperation with the Defense Logistics Agency and the U.S. Air Force to estimate groundwater-flow direction, install groundwater monitoring wells, and collect soil and groundwater samples for petroleum hydrocarbon compounds to identify the presence of hydrocarbon contamination at Ellsworth Air Force Base, South Dakota, specifically around Fuels Area C. Several fuel spills of diesel fuel, jet fuel, and other petroleum products were documented on or near Fuels Area C and several studies have been done to determine the extent of petroleum hydrocarbon contamination in the subsurface. Two-dimensional electrical resistivity tomography surveys were completed at Fuels Area C in 2014 to characterize subsurface materials and determine the depth to bedrock along survey lines. The depth to the top of the Pierre Shale from land surface along the four electrical resistivity tomography survey lines in Fuels area C ranged from about 5.4 to 8.7 meters. Resistivity lines and lithologic logs in wells in the area indicated mostly clay material with minor occurrences of sand and gravel. Discrete groundwater levels were collected between November 2014 and June 2018 at 14 monitoring wells for use in generating a potentiometric surface in the study area around Fuels Area C. The potentiometric contours indicated that groundwater flow was from the west to east or southwest to southeast around Fuels Area C. Soil and groundwater samples were collected at selected locations from 2014 to 2018 to better understand the presence and movement of petroleum hydrocarbons in the study area around Fuels Area C. Soil samples were collected at eight wells during installation in 2014 and three wells during installation in 2016. Groundwater samples were collected from 14 wells and a recovery sump around Fuels Area C from 2014 to 2018. Several petroleum hydrocarbon compounds were detected, but below action levels, in soil samples collected in 2014 and 2016. Benzene and toluene were not detected in any of the soil samples from the 11 monitoring well sites. Ethylbenzene and total xylenes were detected at sites 1 and 7. Naphthalene was detected in samples from five sites (sites 1, 5, 7, 8, and 9), but concentrations were less than the Tier 1 action level of 25 milligrams per kilogram. Gasoline-range organic compounds were detected in all soil samples collected during the installation of 11 groundwater monitoring wells within or near Fuels Area C in 2014 and 2016. Diesel-range organic compounds were detected in 9 out of the 11 soil samples collected at the 11 monitoring wells. Gasoline-range organic compound concentrations exceeded the Tier 2 assessment level for total petroleum hydrocarbons in soil samples from site 1 (5,200 milligrams per kilogram), site 5 (580 milligrams per kilogram), and site 9 (1,800 milligrams per kilogram); the remaining sites had concentrations below the Tier 2 assessment level for total petroleum hydrocarbons. The highest concentrations of diesel-range organic compounds in soil samples were from site 1 (3,600 milligrams per kilogram), site 5 (440 milligrams per kilogram), and site 14 (330 milligrams per kilogram), and only the sample from site 1 exceeded the Tier 2 assessment level for total petroleum hydrocarbons. Petroleum hydrocarbon concentrations were measured in samples collected from 14 groundwater monitoring wells and 1 recovery sump between 2014 and 2018 in the study area around Fuels Area C. Benzene, toluene, ethylbenzene, and xylene (BTEX) compounds were detected in at least one sample collected from 10 of the 15 sites sampled in the study area from 2014 to 2018. Samples from monitoring well sites 2, 3, 6, 8, and 9 did not have any quantifiable concentrations of BTEX compounds. Multiple BTEX compounds were detected consistently in samples collected from sites 10 and 11. Few BTEX compounds were detected at sites outside of and downgradient from Fuels Area C (sites 12–14). Naphthalene was detected in 8 of the 15 sites sampled in the study area in 2014–18. Measurable concentrations of naphthalene generally were less than 5 micrograms per liter in wells sampled in the study area in 2014–18 except for samples collected at sites 5, 7, and 11. The variability of the presence of BTEX compounds and naphthalene in wells sampled in the study area during 2014–18 likely is caused by the variability in the subsurface material, local groundwater flow, operational fueling activities, and historical spills and releases in the area. The spatial and temporal variability in the BTEX compounds and naphthalene concentrations from samples collected from 2014 to 2018 do not indicate a consistent pattern of subsurface flow or contaminate movement that would be expected if a contaminant plume migrated with the flow and movement of groundwater. Gasoline-range organic and diesel-range organic compounds were detected in most of the groundwater samples collected in the study area around Fuels Area C in 2014–18; however, concentrations were often less than the laboratory reporting level. Median gasoline-range organic compound concentrations were greater than the laboratory reporting level at sites 1, 5, 9, 10, and 11. The highest concentrations of gasoline-range organic and diesel-range organic compounds generally were observed in samples collected from sites 10 and 11. Gasoline-range organic compound concentrations ranged from 1,500 to 9,700 micrograms per liter at site 10 and from less than 100 to 13,000 micrograms per liter at site 11. Diesel-range organic compound concentrations ranged from 9,600 to 55,000 micrograms per liter at site 10 and from 560 to 7,300 micrograms per liter at site 11.
- 1 January 2021
- Published by US Geological Survey in Scientific Investigations Report
Groundwater assessment for petroleum hydrocarbon compounds associated with Fuels Area C, Ellsworth Air Force Base, South Dakota, 2014–18
First posted August 2, 2021 Director, Dakota Water Science CenterU.S. Geological Survey821 East Interstate AvenueBismarck, ND 585031608 Mountain View RoadRapid City, SD 57702 In 2013, the U.S. Geological Survey began a study in cooperation with the Defense Logistics Agency and the U.S. Air Force to estimate groundwater-flow direction, install groundwater monitoring wells, and collect soil and groundwater samples for petroleum hydrocarbon compounds to identify the presence of hydrocarbon contamination at Ellsworth Air Force Base, South Dakota, specifically around Fuels Area C. Several fuel spills of diesel fuel, jet fuel, and other petroleum products were documented on or near Fuels Area C and several studies have been done to determine the extent of petroleum hydrocarbon contamination in the subsurface. Two-dimensional electrical resistivity tomography surveys were completed at Fuels Area C in 2014 to characterize subsurface materials and determine the depth to bedrock along survey lines. The depth to the top of the Pierre Shale from land surface along the four electrical resistivity tomography survey lines in Fuels area C ranged from about 5.4 to 8.7 meters. Resistivity lines and lithologic logs in wells in the area indicated mostly clay material with minor occurrences of sand and gravel. Discrete groundwater levels were collected between November 2014 and June 2018 at 14 monitoring wells for use in generating a potentiometric surface in the study area around Fuels Area C. The potentiometric contours indicated that groundwater flow was from the west to east or southwest to southeast around Fuels Area C. Soil and groundwater samples were collected at selected locations from 2014 to 2018 to better understand the presence and movement of petroleum hydrocarbons in the study area around Fuels Area C. Soil samples were collected at eight wells during installation in 2014 and three wells during installation in 2016. Groundwater samples were collected from 14 wells and a recovery sump around Fuels Area C from 2014 to 2018. Several petroleum hydrocarbon compounds were detected, but below action levels, in soil samples collected in 2014 and 2016. Benzene and toluene were not detected in any of the soil samples from the 11 monitoring well sites. Ethylbenzene and total xylenes were detected at sites 1 and 7. Naphthalene was detected in samples from five sites (sites 1, 5, 7, 8, and 9), but concentrations were less than the Tier 1 action level of 25 milligrams per kilogram. Gasoline-range organic compounds were detected in all soil samples collected during the installation of 11 groundwater monitoring wells within or near Fuels Area C in 2014 and 2016. Diesel-range organic compounds were detected in 9 out of the 11 soil samples collected at the 11 monitoring wells. Gasoline-range organic compound concentrations exceeded the Tier 2 assessment level for total petroleum hydrocarbons in soil samples from site 1 (5,200 milligrams per kilogram), site 5 (580 milligrams per kilogram), and site 9 (1,800 milligrams per kilogram); the remaining sites had concentrations below the Tier 2 assessment level for total petroleum hydrocarbons. The highest concentrations of diesel-range organic compounds in soil samples were from site 1 (3,600 milligrams per kilogram), site 5 (440 milligrams per kilogram), and site 14 (330 milligrams per kilogram), and only the sample from site 1 exceeded the Tier 2 assessment level for total petroleum hydrocarbons. Petroleum hydrocarbon concentrations were measured in samples collected from 14 groundwater monitoring wells and 1 recovery sump between 2014 and 2018 in the study area around Fuels Area C. Benzene, toluene, ethylbenzene, and xylene (BTEX) compounds were detected in at least one sample collected from 10 of the 15 sites sampled in the study area from 2014 to 2018. Samples from monitoring well sites 2, 3, 6, 8, and 9 did not have any quantifiable concentrations of BTEX compounds. Multiple BTEX compounds were detected consistently in samples collected from sites 10 and 11. Few BTEX compounds were detected at sites outside of and downgradient from Fuels Area C (sites 12–14). Naphthalene was detected in 8 of the 15 sites sampled in the study area in 2014–18. Measurable concentrations of naphthalene generally were less than 5 micrograms per liter in wells sampled in the study area in 2014–18 except for samples collected at sites 5, 7, and 11. The variability of the presence of BTEX compounds and naphthalene in wells sampled in the study area during 2014–18 likely is caused by the variability in the subsurface material, local groundwater flow, operational fueling activities, and historical spills and releases in the area. The spatial and temporal variability in the BTEX compounds and naphthalene concentrations from samples collected from 2014 to 2018 do not indicate a consistent pattern of subsurface flow or contaminate movement that would be expected if a contaminant plume migrated with the flow and movement of groundwater. Gasoline-range organic and diesel-range organic compounds were detected in most of the groundwater samples collected in the study area around Fuels Area C in 2014–18; however, concentrations were often less than the laboratory reporting level. Median gasoline-range organic compound concentrations were greater than the laboratory reporting level at sites 1, 5, 9, 10, and 11. The highest concentrations of gasoline-range organic and diesel-range organic compounds generally were observed in samples collected from sites 10 and 11. Gasoline-range organic compound concentrations ranged from 1,500 to 9,700 micrograms per liter at site 10 and from less than 100 to 13,000 micrograms per liter at site 11. Diesel-range organic compound concentrations ranged from 9,600 to 55,000 micrograms per liter at site 10 and from 560 to 7,300 micrograms per liter at site 11.
- 1 January 2003
- Published by US Geological Survey
LakeVOC; A Computer Model to Estimate the Concentration of Volatile Organic Compounds in Lakes and Reservoirs
U.S. Geological Survey Fact Sheet 104-03
- 1 January 2003
- Published by US Geological Survey
LakeVOC; A Computer Model to Estimate the Concentration of Volatile Organic Compounds in Lakes and Reservoirs
U.S. Geological Survey Fact Sheet 104-03