Daniel Dantas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniel Dantas has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Natalino Calegario
Universidade Federal de Lavras
7 shared publications - Luiz Otávio Rodrigues Pinto
Universidade Federal de Lavras
4 shared publications - Marcela de Castro Nunes Santos Terra
Federal University of São João del-Rei
4 shared publications Natalino Calegario
Federal University of Lavras, Departament of Forest Sciences, Lavras, Minas Gerais, Brazil, tel.: 5538991237493
3 shared publications- Elliezer de Almeida Melo
Instituto Federal Goiano, Brasil
2 shared publications Marcela de Castro Nunes Santos Terra
Federal University of Lavras, Departament of Forest Sciences, Lavras, Minas Gerais, Brazil, tel.: 5538991237493
2 shared publications
Latest Publications
- Open Access
- 29 May 2024
- Published by Embrapa Florestas in Pesquisa Florestal Brasileira
- Vol. 44
Custo, tempo e precisão: uma otimização do inventário florestal pré-corte em um povoamento de eucalipto
O inventário florestal constitui uma prática fundamental para quantificar e qualificar o potencial de uma floresta. Intensidade de amostragem, tamanho e forma das parcelas são pontos relevantes no planejamento dessa atividade, pois afetam diretamente os custos e tempo de coleta de dados, além de influenciar na sua precisão. Este estudo teve como objetivo avaliar, em termos de precisão, custos e tempo, a utilização de diferentes tamanhos, formas e arranjos de parcelas amostrais na realização do inventário florestal pré-corte de Eucalyptus spp. A pesquisa foi realizada em uma fazenda no norte de Minas Gerais, Brasil, onde foram realizados o censo florestal e a cubagem rigorosa. Foram considerados 16 cenários: dois processos de amostragem (amostragem sistemática e amostragem casual simples), quatro tamanhos de parcela (200, 300, 400 e 500m²) e duas formas (circular e retangular). A intensidade amostral foi fixada em 5 parcelas para todos os cenários. Realizou-se 10.000 simulações pelo método de Monte Carlo, verificando a probabilidade de os valores estarem próximos à média. A análise combinada entre erro, custos e tempo de medição apontou que, para um plantio de eucalipto aos 8 anos de idade, a amostragem casual, com parcelas circulares de 300m² representa o cenário amostral ótimo.
- 29 May 2024
- Published by Embrapa Florestas in Pesquisa Florestal Brasileira
- Vol. 44
Open AccessCusto, tempo e precisão: uma otimização do inventário florestal pré-corte em um povoamento de eucalipto
O inventário florestal constitui uma prática fundamental para quantificar e qualificar o potencial de uma floresta. Intensidade de amostragem, tamanho e forma das parcelas são pontos relevantes no planejamento dessa atividade, pois afetam diretamente os custos e tempo de coleta de dados, além de influenciar na sua precisão. Este estudo teve como objetivo avaliar, em termos de precisão, custos e tempo, a utilização de diferentes tamanhos, formas e arranjos de parcelas amostrais na realização do inventário florestal pré-corte de Eucalyptus spp. A pesquisa foi realizada em uma fazenda no norte de Minas Gerais, Brasil, onde foram realizados o censo florestal e a cubagem rigorosa. Foram considerados 16 cenários: dois processos de amostragem (amostragem sistemática e amostragem casual simples), quatro tamanhos de parcela (200, 300, 400 e 500m²) e duas formas (circular e retangular). A intensidade amostral foi fixada em 5 parcelas para todos os cenários. Realizou-se 10.000 simulações pelo método de Monte Carlo, verificando a probabilidade de os valores estarem próximos à média. A análise combinada entre erro, custos e tempo de medição apontou que, para um plantio de eucalipto aos 8 anos de idade, a amostragem casual, com parcelas circulares de 300m² representa o cenário amostral ótimo.
- Open Access
- 17 October 2023
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Agronomy
- Vol. 46 (1) , e63286
Accuracy of tree height estimation with model extracted from artificial neural network and new linear and nonlinear models
Variable height is commonly used as an input attribute to estimate other variables. Thus, to ensure less susceptibility to errors, it is necessary to obtain the variable height correctly. In addition to DBH, hypsometric relationships are influenced by several factors, such as site, age, genetic variation, and silvicultural practices. The inclusion of these factors in hypsometric models can lead to a gain in the quality of the estimates and in the biological realism. The objective of this study was to propose and evaluate the performance of a model extracted from artificial neural network training and of new models to estimate the total height of eucalyptus trees. The data used in this study originated from temporary forest inventories conducted in eucalyptus stands in Minas Gerais, Brazil. A multilayer perceptron artificial neural network was trained, and a nonlinear equation was extracted from the best-performing network to predict the total heights of trees. New linear and nonlinear hypsometric models were constructed and fit considering variables related to individual trees (DBH) and stands (plot basal area, age and site index). The new hypsometric models proposed in this study showed satisfactory performance and are effective for estimating the total heights of eucalyptus trees, particularly the model extracted from the artificial neural network and the nonlinear model
- 17 October 2023
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Agronomy
- Vol. 46 (1) , e63286
Open AccessAccuracy of tree height estimation with model extracted from artificial neural network and new linear and nonlinear models
Variable height is commonly used as an input attribute to estimate other variables. Thus, to ensure less susceptibility to errors, it is necessary to obtain the variable height correctly. In addition to DBH, hypsometric relationships are influenced by several factors, such as site, age, genetic variation, and silvicultural practices. The inclusion of these factors in hypsometric models can lead to a gain in the quality of the estimates and in the biological realism. The objective of this study was to propose and evaluate the performance of a model extracted from artificial neural network training and of new models to estimate the total height of eucalyptus trees. The data used in this study originated from temporary forest inventories conducted in eucalyptus stands in Minas Gerais, Brazil. A multilayer perceptron artificial neural network was trained, and a nonlinear equation was extracted from the best-performing network to predict the total heights of trees. New linear and nonlinear hypsometric models were constructed and fit considering variables related to individual trees (DBH) and stands (plot basal area, age and site index). The new hypsometric models proposed in this study showed satisfactory performance and are effective for estimating the total heights of eucalyptus trees, particularly the model extracted from the artificial neural network and the nonlinear model
- Open Access
- 14 December 2022
- Published by Embrapa Florestas in Pesquisa Florestal Brasileira
- Vol. 42
Modelos de crescimento não linear para espécies de árvores usadas na restauração florestal no Arco do Desmatamento da Amazônia brasileira
A grande quantidade de áreas degradadas e o potencial produtivo das reservas legais no Brasil tornam a restauração uma demanda ambiental e oportunidade comercial. Modelamos o crescimento do diâmetro em função da idade de oito espécies de árvores em plantações de recomposição na Amazônia brasileira. A partir de 14 anos de dados de inventário florestal anual, testamos variações da função logística: logística simples, logística com covariante (área da planta na época do plantio), logística com efeito aleatório, logística com efeito aleatório e covariante. As espécies Schizolobium parahyba var. amazonicum, Tectona grandis e Simarouba amara apresentaram as maiores taxas de crescimento, enquanto Cordia alliodora, Cedrela odorata e três espécies do gênero Handroanthus apresentaram crescimento mais lento. Os ganhos com o uso da covariante na modelagem foram pequenos para modelos de efeitos fixos e mistos. Os ganhos com a inclusão do efeito aleatório foram substanciais. Os modelos de efeitos mistos tiveram o melhor desempenho na modelagem do crescimento das espécies. Nossos resultados fornecem subsídios para uma visão crítica sobre os critérios, possibilidades de recomposição e práticas de manejo de áreas degradadas em reservas legais na Amazônia. Uma análise econômica é necessária para garantir a viabilidade da exploração sustentável dessas áreas.
- 14 December 2022
- Published by Embrapa Florestas in Pesquisa Florestal Brasileira
- Vol. 42
Open AccessModelos de crescimento não linear para espécies de árvores usadas na restauração florestal no Arco do Desmatamento da Amazônia brasileira
A grande quantidade de áreas degradadas e o potencial produtivo das reservas legais no Brasil tornam a restauração uma demanda ambiental e oportunidade comercial. Modelamos o crescimento do diâmetro em função da idade de oito espécies de árvores em plantações de recomposição na Amazônia brasileira. A partir de 14 anos de dados de inventário florestal anual, testamos variações da função logística: logística simples, logística com covariante (área da planta na época do plantio), logística com efeito aleatório, logística com efeito aleatório e covariante. As espécies Schizolobium parahyba var. amazonicum, Tectona grandis e Simarouba amara apresentaram as maiores taxas de crescimento, enquanto Cordia alliodora, Cedrela odorata e três espécies do gênero Handroanthus apresentaram crescimento mais lento. Os ganhos com o uso da covariante na modelagem foram pequenos para modelos de efeitos fixos e mistos. Os ganhos com a inclusão do efeito aleatório foram substanciais. Os modelos de efeitos mistos tiveram o melhor desempenho na modelagem do crescimento das espécies. Nossos resultados fornecem subsídios para uma visão crítica sobre os critérios, possibilidades de recomposição e práticas de manejo de áreas degradadas em reservas legais na Amazônia. Uma análise econômica é necessária para garantir a viabilidade da exploração sustentável dessas áreas.
- Open Access
- 17 November 2021
- Published by Universidade Federal de Santa Maria in Ciência Florestal
- Vol. 31 (4) , 1812-1832
Modelagem volumétrica da necromassa lenhosa em floresta manejada e não manejada na Amazônia Central
A necromassa lenhosa representa cerca de 20% do carbono disponível na biomassa acima do solo em florestas amazônicas, entretanto a sua quantificação não é uma atividade comum em estudos florestais. O objetivo deste trabalho foi realizar a modelagem volumétrica da necromassa, a fim de proporcionar uma ferramenta para quantificação desse componente da vegetação. A coleta de dados foi realizada em 15 parcelas permanentes alocadas em floresta sob manejo florestal sustentável e outras 5 em floresta não manejada localizadas no estado do Amazonas, Brasil. Foi realizada a cubagem de troncos e pedaços de troncos de árvores mortas – com diâmetro a partir de 10 cm – caídos dentro dos limites da parcela. A modelagem foi realizada por meio de regressão não linear (modelo de Schumacher-Hall), Redes Neurais Artificiais (RNA) e Máquina de Vetor de Suporte (MSV). Nessa modelagem, os dados foram divididos em 80% para ajuste/treinamento e 20% para teste. Considerou-se como critérios de precisão da modelagem: correlação entre valores estimados e observados, raiz do erro quadrático médio e distribuição gráfica dos resíduos. Foram cubados um total de 1049 troncos ou pedaços de troncos caídos, sendo 848 na área de floresta manejada e 201 na floresta não manejada. Os três métodos testados apresentaram correlação próxima a 1, entre volume observado e estimado. Os menores RMSE% foram de 33,21% na floresta manejada (RNA) para a base de ajuste e 22,38% na floresta não manejada (Schumacher-Hall) para os dados de teste. As RNA apresentaram melhor desempenho durante a etapa de treinamento, todavia não houve boa extrapolação dos seus resultados para a base de teste. O modelo de Schumacher-Hall apresentou o melhor desempenho para as estimativas de volume com os dados da base de teste. A modelagem do volume individual de troncos mortos caídos apresentou dificuldade para minimização dos erros de estimativa devido às características dos dados.
- 17 November 2021
- Published by Universidade Federal de Santa Maria in Ciência Florestal
- Vol. 31 (4) , 1812-1832
Open AccessModelagem volumétrica da necromassa lenhosa em floresta manejada e não manejada na Amazônia Central
A necromassa lenhosa representa cerca de 20% do carbono disponível na biomassa acima do solo em florestas amazônicas, entretanto a sua quantificação não é uma atividade comum em estudos florestais. O objetivo deste trabalho foi realizar a modelagem volumétrica da necromassa, a fim de proporcionar uma ferramenta para quantificação desse componente da vegetação. A coleta de dados foi realizada em 15 parcelas permanentes alocadas em floresta sob manejo florestal sustentável e outras 5 em floresta não manejada localizadas no estado do Amazonas, Brasil. Foi realizada a cubagem de troncos e pedaços de troncos de árvores mortas – com diâmetro a partir de 10 cm – caídos dentro dos limites da parcela. A modelagem foi realizada por meio de regressão não linear (modelo de Schumacher-Hall), Redes Neurais Artificiais (RNA) e Máquina de Vetor de Suporte (MSV). Nessa modelagem, os dados foram divididos em 80% para ajuste/treinamento e 20% para teste. Considerou-se como critérios de precisão da modelagem: correlação entre valores estimados e observados, raiz do erro quadrático médio e distribuição gráfica dos resíduos. Foram cubados um total de 1049 troncos ou pedaços de troncos caídos, sendo 848 na área de floresta manejada e 201 na floresta não manejada. Os três métodos testados apresentaram correlação próxima a 1, entre volume observado e estimado. Os menores RMSE% foram de 33,21% na floresta manejada (RNA) para a base de ajuste e 22,38% na floresta não manejada (Schumacher-Hall) para os dados de teste. As RNA apresentaram melhor desempenho durante a etapa de treinamento, todavia não houve boa extrapolação dos seus resultados para a base de teste. O modelo de Schumacher-Hall apresentou o melhor desempenho para as estimativas de volume com os dados da base de teste. A modelagem do volume individual de troncos mortos caídos apresentou dificuldade para minimização dos erros de estimativa devido às características dos dados.
- Open Access
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Revista Árvore
- Vol. 45
REDUCED-IMPACT LOGGING BY ALLOCATING LOG-DECKS USING MULTI-OBJECTIVE EVOLUTIONARY ALGORITHM IN WESTERN AMAZON
To reduce the damage caused by logging in the Amazon rainforest, new metaheuristics have been implemented and tested to ensure the sustainability of this economic segment. Therefore, this study aimed to compare alternatives for road sizing and log deck allocation. In a forest management unit, the skidding to log decks was evaluated in two different areas. To determine the skidding/log deck relation, georeferenced points were generated equally spaced every 50 m. In area 1, the Integer Linear Programming (ILP) model and the Multi-Objective Evolutionary Algorithm (MOEA) were compared. In area 2, only the MOEA was considered. In both areas, these models were also compared to the current planning used in the forest management unit. Solutions were then generated to identify the best management alternative. In both areas, the MOEA showed greater efficiency regarding the processing time, as well as the reduction of log decks number and the road sizing. The multi-objective evolutionary approach assists the decision-making process, due to the presentation of alternatives based on Pareto-optimal solutions, making the choice more flexible and well supported.
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Revista Árvore
- Vol. 45
Open AccessREDUCED-IMPACT LOGGING BY ALLOCATING LOG-DECKS USING MULTI-OBJECTIVE EVOLUTIONARY ALGORITHM IN WESTERN AMAZON
To reduce the damage caused by logging in the Amazon rainforest, new metaheuristics have been implemented and tested to ensure the sustainability of this economic segment. Therefore, this study aimed to compare alternatives for road sizing and log deck allocation. In a forest management unit, the skidding to log decks was evaluated in two different areas. To determine the skidding/log deck relation, georeferenced points were generated equally spaced every 50 m. In area 1, the Integer Linear Programming (ILP) model and the Multi-Objective Evolutionary Algorithm (MOEA) were compared. In area 2, only the MOEA was considered. In both areas, these models were also compared to the current planning used in the forest management unit. Solutions were then generated to identify the best management alternative. In both areas, the MOEA showed greater efficiency regarding the processing time, as well as the reduction of log decks number and the road sizing. The multi-objective evolutionary approach assists the decision-making process, due to the presentation of alternatives based on Pareto-optimal solutions, making the choice more flexible and well supported.
- Open Access
- 1 January 2021
- Published by Sistema de Bibliotecas UACH in Bosque (Valdivia)
- Vol. 42 (1) , 131-140
Machine learning for carbon stock prediction in a tropical forest in Southeastern Brazil
The increasing awareness of global climate change has drawn attention to the role of forests as mitigators of this process as they act as carbon sinks to the atmosphere. Understanding the process of carbon storage in forests and its drivers, as well as presenting consistent models for their estimation, is a current demand. In this sense, the aim of this study was to evaluate the performance of machine learning techniques: support vector machines (SVM) and to propose a new nonlinear model extracted from the training of an artificial neural network (ANN) in the modeling of above ground carbon stock in a secondary semideciduous forest. SVM and ANN construction and training process considered independent variables selected by stepwise: minimum DBH (diameter of breast height - 1.3 m), maximum DBH, mean DBH, total height and number of trees, all by plot. SVM and the model extracted from ANN were applied to the data set intended for validation. Both techniques presented satisfactory performance in modeling carbon stock by plot, with homogeneous distribution and low dispersion of residues and predicted values close to those observed. Analysis criteria indicated superior performance of the model extracted from the artificial neural network, which presented a mean relative error of 6.94 %, while the support vector machine presented 13.52 %, combined with lower bias values and higher correlation between predictions and observations.
- 1 January 2021
- Published by Sistema de Bibliotecas UACH in Bosque (Valdivia)
- Vol. 42 (1) , 131-140
Open AccessMachine learning for carbon stock prediction in a tropical forest in Southeastern Brazil
The increasing awareness of global climate change has drawn attention to the role of forests as mitigators of this process as they act as carbon sinks to the atmosphere. Understanding the process of carbon storage in forests and its drivers, as well as presenting consistent models for their estimation, is a current demand. In this sense, the aim of this study was to evaluate the performance of machine learning techniques: support vector machines (SVM) and to propose a new nonlinear model extracted from the training of an artificial neural network (ANN) in the modeling of above ground carbon stock in a secondary semideciduous forest. SVM and ANN construction and training process considered independent variables selected by stepwise: minimum DBH (diameter of breast height - 1.3 m), maximum DBH, mean DBH, total height and number of trees, all by plot. SVM and the model extracted from ANN were applied to the data set intended for validation. Both techniques presented satisfactory performance in modeling carbon stock by plot, with homogeneous distribution and low dispersion of residues and predicted values close to those observed. Analysis criteria indicated superior performance of the model extracted from the artificial neural network, which presented a mean relative error of 6.94 %, while the support vector machine presented 13.52 %, combined with lower bias values and higher correlation between predictions and observations.
- Open Access
- 1 December 2020
- Published by Sistema de Bibliotecas UACH in Bosque (Valdivia)
- Vol. 41 (3) , 353-364
Reduction of sampling intensity in forest inventories to estimate the total height of eucalyptus trees
This study aimed at evaluating the performance of different models based on Artificial neural networks (ANN) to estimate the total height of eucalyptus trees (Eucalyptus spp.), reducing the number of measurements in the field. Forty-eight ANN were tested, different from each other by the number of trees used as training sample, number of trees used to calculate the dominant height and use of variables (a) categorical, (b) categorical and continuous and (c) continuous, except for the diameter at 1.30 meters above the ground (DBH), used in all combinations. Estimates of height obtained by ANN were compared with values observed and estimates obtained by a hypsometric model. The ANN that showed the best results were used for the height estimation in forest inventory data for further application in the Schumacher and Hall volumetric model. The proposed models were efficient to estimate the total height of eucalyptus trees and allowed the expressive reduction of the number of trees to be measured in forest inventory. The best model found is composed of five trees as training sample, one as test sample and one as validation sample; dominant height coming from the height of the tallest tree in the plot; categorical variable Clone and continuous variables DBH, DBH dominant and basal area of the plot.
- 1 December 2020
- Published by Sistema de Bibliotecas UACH in Bosque (Valdivia)
- Vol. 41 (3) , 353-364
Open AccessReduction of sampling intensity in forest inventories to estimate the total height of eucalyptus trees
This study aimed at evaluating the performance of different models based on Artificial neural networks (ANN) to estimate the total height of eucalyptus trees (Eucalyptus spp.), reducing the number of measurements in the field. Forty-eight ANN were tested, different from each other by the number of trees used as training sample, number of trees used to calculate the dominant height and use of variables (a) categorical, (b) categorical and continuous and (c) continuous, except for the diameter at 1.30 meters above the ground (DBH), used in all combinations. Estimates of height obtained by ANN were compared with values observed and estimates obtained by a hypsometric model. The ANN that showed the best results were used for the height estimation in forest inventory data for further application in the Schumacher and Hall volumetric model. The proposed models were efficient to estimate the total height of eucalyptus trees and allowed the expressive reduction of the number of trees to be measured in forest inventory. The best model found is composed of five trees as training sample, one as test sample and one as validation sample; dominant height coming from the height of the tallest tree in the plot; categorical variable Clone and continuous variables DBH, DBH dominant and basal area of the plot.
- 1 December 2020
- Published by Instituto de Pesquisa e Estudos Florestais (IPEF) in Scientia Forestalis
- Vol. 48 (128)
Generalization of the diametrical class management prescription for heterogeneous multiage forest
- 1 December 2020
- Published by Instituto de Pesquisa e Estudos Florestais (IPEF) in Scientia Forestalis
- Vol. 48 (128)
Generalization of the diametrical class management prescription for heterogeneous multiage forest
- Open Access
- 5 November 2020
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Agronomy
- Vol. 43, e48276
Above and belowground carbon stock in a tropical forest in Brazil
An increase in atmospheric CO2 levels and global climate changes have led to an increased focus on CO2 capture mechanisms. The in situ quantification and spatial patterns of forest carbon stocks can provide a better picture of the carbon cycle and a deeper understanding of the functions and services of forest ecosystems. This study aimed to determine the aboveground (tree trunks) and belowground (soil and fine roots, at four depths) carbon stocks in a tropical forest in Brazil and to evaluate the spatial patterns of carbon in the three different compartments and in the total stock. Census data from a semideciduous seasonal forest were used to estimate the aboveground carbon stock. The carbon stocks of soil and fine roots were sampled in 52 plots at depths of 0-20, 20-40, 40-60, and 60-80 cm, combined with the measured bulk density. The total estimated carbon stock was 267.52 Mg ha-1, of which 35.23% was in aboveground biomass, 63.22% in soil, and 1.54% in roots. In the soil, a spatial pattern of the carbon stock was repeated at all depths analyzed, with a reduction in the amount of carbon as the depth increased. The carbon stock of the trees followed the same spatial pattern as the soil, indicating a relationship between these variables. In the fine roots, the carbon stock decreased with increasing depth, but the spatial gradient did not follow the same pattern as the soil and trees, which indicated that the root carbon stock was most likely influenced by other factors.
- 5 November 2020
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Agronomy
- Vol. 43, e48276
Open AccessAbove and belowground carbon stock in a tropical forest in Brazil
An increase in atmospheric CO2 levels and global climate changes have led to an increased focus on CO2 capture mechanisms. The in situ quantification and spatial patterns of forest carbon stocks can provide a better picture of the carbon cycle and a deeper understanding of the functions and services of forest ecosystems. This study aimed to determine the aboveground (tree trunks) and belowground (soil and fine roots, at four depths) carbon stocks in a tropical forest in Brazil and to evaluate the spatial patterns of carbon in the three different compartments and in the total stock. Census data from a semideciduous seasonal forest were used to estimate the aboveground carbon stock. The carbon stocks of soil and fine roots were sampled in 52 plots at depths of 0-20, 20-40, 40-60, and 60-80 cm, combined with the measured bulk density. The total estimated carbon stock was 267.52 Mg ha-1, of which 35.23% was in aboveground biomass, 63.22% in soil, and 1.54% in roots. In the soil, a spatial pattern of the carbon stock was repeated at all depths analyzed, with a reduction in the amount of carbon as the depth increased. The carbon stock of the trees followed the same spatial pattern as the soil, indicating a relationship between these variables. In the fine roots, the carbon stock decreased with increasing depth, but the spatial gradient did not follow the same pattern as the soil and trees, which indicated that the root carbon stock was most likely influenced by other factors.
- Open Access
- 20 June 2020
- Published by Universidade Federal de Minas Gerais - Pro-Reitoria de Pesquisa in Caderno de Ciências Agrárias
- Vol. 12, 1-9
Predição volumétrica por meio da krigagem pontual reduz o esforço de amostragem em inventários florestais pré-corte
O objetivo deste trabalho foi avaliar o desempenho de um estimador geoestatístico para estimar a volumetria de um povoamento de eucalipto com 8 anos de idade considerando diferentes intensidades amostrais. A base de dados foi proveniente de inventários florestais pré-corte. A intensidade amostral foi de uma parcela a cada 5 ha aproximadamente, totalizando 220 parcelas inventariadas em campo. Os dados foram divididos em dois grupos: 80% para ajuste dos semivariogramas e 20% para validação. Dentre os dados destinados aos ajustes, foram selecionadas parcelas que representassem quatro diferentes intensidades amostrais (1:5, 1:10, 1:15 e 1:20), e posteriormente, ajustados os modelos de semivariogramas. Os modelos foram então utilizados para estimar o volume das parcelas destinadas à validação. Os resultados permitiram inferir que o modelo esférico ajustado para as diferentes intensidades amostrais apresentou desempenho satisfatório e próximos entre si, com erros inferiores a 10 %. O menor valor foi apresentado na intensidade amostral de 1:5, 7,33 %, e o maior na intensidade de 1:20, 8,90 %, uma diferença de apenas 1,57 %. Assim sendo, foi possível concluir que o estimador geoestatístico permitiu a redução da intensidade amostral em inventários que antecedem o corte de povoamentos clonais de Eucalyptus, sem grandes perdas na precisão.
- 20 June 2020
- Published by Universidade Federal de Minas Gerais - Pro-Reitoria de Pesquisa in Caderno de Ciências Agrárias
- Vol. 12, 1-9
Open AccessPredição volumétrica por meio da krigagem pontual reduz o esforço de amostragem em inventários florestais pré-corte
O objetivo deste trabalho foi avaliar o desempenho de um estimador geoestatístico para estimar a volumetria de um povoamento de eucalipto com 8 anos de idade considerando diferentes intensidades amostrais. A base de dados foi proveniente de inventários florestais pré-corte. A intensidade amostral foi de uma parcela a cada 5 ha aproximadamente, totalizando 220 parcelas inventariadas em campo. Os dados foram divididos em dois grupos: 80% para ajuste dos semivariogramas e 20% para validação. Dentre os dados destinados aos ajustes, foram selecionadas parcelas que representassem quatro diferentes intensidades amostrais (1:5, 1:10, 1:15 e 1:20), e posteriormente, ajustados os modelos de semivariogramas. Os modelos foram então utilizados para estimar o volume das parcelas destinadas à validação. Os resultados permitiram inferir que o modelo esférico ajustado para as diferentes intensidades amostrais apresentou desempenho satisfatório e próximos entre si, com erros inferiores a 10 %. O menor valor foi apresentado na intensidade amostral de 1:5, 7,33 %, e o maior na intensidade de 1:20, 8,90 %, uma diferença de apenas 1,57 %. Assim sendo, foi possível concluir que o estimador geoestatístico permitiu a redução da intensidade amostral em inventários que antecedem o corte de povoamentos clonais de Eucalyptus, sem grandes perdas na precisão.