Pietro Meriggi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pietro Meriggi has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Gianmarco de Felice
Roma Tre University
10 shared publications - Stefano De Santis
Roma Tre University
9 shared publications Gianmarco de Felice
6 shared publicationsSara Fares
Ph.D. Student, Dept. of Civil Engineering, Computer Science and Aeronautical Technology, Roma Tre Univ., Via Vito Volterra 62, 00146 Rome, Italy
3 shared publications- Anna Mordanova
Department of Engineering, Roma Tre University, Rome, Italy
2 shared publications - Arnaud Montabert
École Normale Supérieure
2 shared publications
Latest Publications
- Open Access
A Geometry-Driven Structural Method for Supporting Archaeological Modelling in Partially Preserved Historic Constructions
The archaeological reconstruction of historic monuments from fragmentary remains requires transforming limited evidence into verifiable hypotheses. This study proposes a methodological framework in which structural analysis plays an active interpretative role, rather than serving merely as verification, provided that input data are independently constrained and modelling assumptions align with the available level of knowledge. The framework is designed to be replicable and transferable to archaeological contexts characterised by incomplete preservation. It combines non-invasive survey techniques—high-resolution digital documentation and ground-penetrating radar (GPR)—to establish reliable geometric and physical constraints. Thrust-based limit analysis, following the Heyman Safe Theorem, is then applied to evaluate reconstruction hypotheses through static equilibrium under self-weight. The methodology is tested on the cavea of the Circus of Maxentius in Rome, a Roman concrete construction in which significant portions of the vaulted substructure are collapsed or buried. Three typological cross-sections are virtually reconstructed using construction-archaeology reasoning, measured geometry, and geophysical evidence. Their stability is assessed through thrust-line admissibility and geometric safety factors. Only one section approaches limit equilibrium when analysed independently, while the others prove inadmissible, suggesting that rear backfills, transverse supporting walls near the imperial corridor, and vaulted structures were essential to the original structural system. Overall, the study demonstrates how integrating non-invasive data and limit analysis reduces interpretative uncertainty in reconstructing partially preserved Roman architecture.
Open AccessA Geometry-Driven Structural Method for Supporting Archaeological Modelling in Partially Preserved Historic Constructions
The archaeological reconstruction of historic monuments from fragmentary remains requires transforming limited evidence into verifiable hypotheses. This study proposes a methodological framework in which structural analysis plays an active interpretative role, rather than serving merely as verification, provided that input data are independently constrained and modelling assumptions align with the available level of knowledge. The framework is designed to be replicable and transferable to archaeological contexts characterised by incomplete preservation. It combines non-invasive survey techniques—high-resolution digital documentation and ground-penetrating radar (GPR)—to establish reliable geometric and physical constraints. Thrust-based limit analysis, following the Heyman Safe Theorem, is then applied to evaluate reconstruction hypotheses through static equilibrium under self-weight. The methodology is tested on the cavea of the Circus of Maxentius in Rome, a Roman concrete construction in which significant portions of the vaulted substructure are collapsed or buried. Three typological cross-sections are virtually reconstructed using construction-archaeology reasoning, measured geometry, and geophysical evidence. Their stability is assessed through thrust-line admissibility and geometric safety factors. Only one section approaches limit equilibrium when analysed independently, while the others prove inadmissible, suggesting that rear backfills, transverse supporting walls near the imperial corridor, and vaulted structures were essential to the original structural system. Overall, the study demonstrates how integrating non-invasive data and limit analysis reduces interpretative uncertainty in reconstructing partially preserved Roman architecture.
- Open Access
V-HBIM: A Vulnerability-Oriented Heritage BIM Workflow for Cultural Heritage Conservation
Heritage Building Information Modelling (H-BIM) is increasingly used for the documentation, conservation and management of historical assets. However, the integration of geometric singularities, degradation phenomena and vulnerability-related information within H-BIM environments remains only partially addressed, as current workflows are often manual, fragmented and poorly connected to structured conservation assessment procedures. This paper introduces V-HBIM, a vulnerability-oriented Heritage BIM approach aimed at integrating geometric data, defect mapping and conservation parameters into a single digital model. A semi-automated scan-to-model workflow is proposed, combining point cloud processing, geometric modelling, mesh-based defect representation, BIM conversion, structural vulnerability calculations and automated information enrichment. The workflow uses CloudCompare, Rhinoceros 3D, Rhino.Inside.Revit, Autodesk Revit and Dynamo scripts to connect digital survey outputs with a structured database derived from the Italian Ministry of Culture Risk Map. The method is validated on the Roman Arch of San Damiano, in the Archeological Park of Carsulae, Italy. Results show that defects can be represented as queryable BIM entities and associated with severity, extent and urgency parameters. The proposed approach supports conservation planning, inspection updating and vulnerability-oriented management of cultural heritage assets.
Open AccessV-HBIM: A Vulnerability-Oriented Heritage BIM Workflow for Cultural Heritage Conservation
Heritage Building Information Modelling (H-BIM) is increasingly used for the documentation, conservation and management of historical assets. However, the integration of geometric singularities, degradation phenomena and vulnerability-related information within H-BIM environments remains only partially addressed, as current workflows are often manual, fragmented and poorly connected to structured conservation assessment procedures. This paper introduces V-HBIM, a vulnerability-oriented Heritage BIM approach aimed at integrating geometric data, defect mapping and conservation parameters into a single digital model. A semi-automated scan-to-model workflow is proposed, combining point cloud processing, geometric modelling, mesh-based defect representation, BIM conversion, structural vulnerability calculations and automated information enrichment. The workflow uses CloudCompare, Rhinoceros 3D, Rhino.Inside.Revit, Autodesk Revit and Dynamo scripts to connect digital survey outputs with a structured database derived from the Italian Ministry of Culture Risk Map. The method is validated on the Roman Arch of San Damiano, in the Archeological Park of Carsulae, Italy. Results show that defects can be represented as queryable BIM entities and associated with severity, extent and urgency parameters. The proposed approach supports conservation planning, inspection updating and vulnerability-oriented management of cultural heritage assets.
- 2 April 2026
- Published by Springer Nature
- p. 1631-1641
3D Distinct Element Model Updating of a Masonry Bell Tower
- 2 April 2026
- Published by Springer Nature
- p. 1631-1641
3D Distinct Element Model Updating of a Masonry Bell Tower
- 1 October 2025
- Published by Springer Nature
- p. 94-102
Video-Based Dynamic Monitoring of Ancient Masonry Structures: The Case Study of Santa Maria Della Quercia Bell Tower
- 1 October 2025
- Published by Springer Nature
- p. 94-102
Video-Based Dynamic Monitoring of Ancient Masonry Structures: The Case Study of Santa Maria Della Quercia Bell Tower
- Open Access
Experimental Investigation on the Tensile and Bond Durability of Galvanized Steel Reinforced Grout
Steel reinforced grout (SRG) composites are widely used for strengthening existing structures. Galvanized (zinc-coated) ultra-high tensile strength steel cords are more durable than brass-coated and cheaper than stainless-steel ones, making them the most common in practice. While compliant with certification standards, corrosion may occur, potentially affecting tensile strength and bond capacity. The latter has, however, remained largely unexplored, highlighting a need to assess durability under different environmental exposures. This study investigated the durability of galvanized SRGs with four cord types and four mortar matrices (cement- and lime-based). Direct tensile, shear bond, and lap-tensile tests were conducted after immersion in saltwater or alkaline solutions, exposure to freeze–thaw or salt crystallization cycles, and high temperatures. Results highlighted salt exposure as the most critical condition, particularly with lime-based matrices. Zinc coating thickness proved essential for corrosion resistance, while freeze–thaw and salt crystallization led to bond degradation due to concentrated steel corrosion and mortar microcracking. The findings highlight the importance of considering appropriate protective measures and exposure-specific conditions when designing SRG reinforcements.
Open AccessExperimental Investigation on the Tensile and Bond Durability of Galvanized Steel Reinforced Grout
Steel reinforced grout (SRG) composites are widely used for strengthening existing structures. Galvanized (zinc-coated) ultra-high tensile strength steel cords are more durable than brass-coated and cheaper than stainless-steel ones, making them the most common in practice. While compliant with certification standards, corrosion may occur, potentially affecting tensile strength and bond capacity. The latter has, however, remained largely unexplored, highlighting a need to assess durability under different environmental exposures. This study investigated the durability of galvanized SRGs with four cord types and four mortar matrices (cement- and lime-based). Direct tensile, shear bond, and lap-tensile tests were conducted after immersion in saltwater or alkaline solutions, exposure to freeze–thaw or salt crystallization cycles, and high temperatures. Results highlighted salt exposure as the most critical condition, particularly with lime-based matrices. Zinc coating thickness proved essential for corrosion resistance, while freeze–thaw and salt crystallization led to bond degradation due to concentrated steel corrosion and mortar microcracking. The findings highlight the importance of considering appropriate protective measures and exposure-specific conditions when designing SRG reinforcements.
- 31 March 2025
- Published by Springer Nature
- p. 431-439
Insight on the Durability of Steel Reinforced Grout (SRG) Systems for the Strengthening of Historical Constructions
- 31 March 2025
- Published by Springer Nature
- p. 431-439
Insight on the Durability of Steel Reinforced Grout (SRG) Systems for the Strengthening of Historical Constructions
- Open Access
- 20 November 2024
- Published by Elsevier in Journal of Building Engineering
- Vol. 98
Seismic assessment of churches through integration of digital survey, texture recognition and distinct element modelling
- 20 November 2024
- Published by Elsevier in Journal of Building Engineering
- Vol. 98
Open AccessSeismic assessment of churches through integration of digital survey, texture recognition and distinct element modelling
- Open Access
- 20 July 2024
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (1) , 105-125
Computer vision-based dynamic identification of a reinforced concrete elevated water tank
There is a growing need for monitoring the structural health conditions of aging structures and for prioritizing maintenance works to extend their safe service life. This requires cheap, flexible, and reliable tools suitable for everyday use in engineering practice. This paper presents a computer vision-based technique combining motion magnification and statistical algorithms to calculate structural natural frequencies under environmental noise excitation, and its application to a reinforced concrete elevated water tank. Digital videos were recorded from various standpoints and post-processed by tracking in time either the variation of the grey-intensity or the motion of selected pixels. Computer vision-based outcomes were validated against accelerometric measurements and integrated to them to improve the understanding of the dynamic behaviour of the water tower, which, counterintuitively, resulted anything but trivial to predict.
- 20 July 2024
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (1) , 105-125
Open AccessComputer vision-based dynamic identification of a reinforced concrete elevated water tank
There is a growing need for monitoring the structural health conditions of aging structures and for prioritizing maintenance works to extend their safe service life. This requires cheap, flexible, and reliable tools suitable for everyday use in engineering practice. This paper presents a computer vision-based technique combining motion magnification and statistical algorithms to calculate structural natural frequencies under environmental noise excitation, and its application to a reinforced concrete elevated water tank. Digital videos were recorded from various standpoints and post-processed by tracking in time either the variation of the grey-intensity or the motion of selected pixels. Computer vision-based outcomes were validated against accelerometric measurements and integrated to them to improve the understanding of the dynamic behaviour of the water tower, which, counterintuitively, resulted anything but trivial to predict.
- Open Access
An Integrated Data-Driven System for Digital Bridge Management
Relational databases are established and widespread tools for storing and managing information. The efficient collection of information in a database appears to be a promising solution for bridge management (BM), thus facilitating the digital transition. The Italian regulatory framework on infrastructure operation and maintenance (O&M) is complex and is constantly being updated. The current plan for implementing its guidelines envisages that infrastructure managers, also on a regional scale, equip themselves with their own digital database for BM. Within this context, this research proposes an integrated methodology that collects information derived from project documentation, in situ inspections, digital surveys, and monitoring and field tests in a queryable database for digitalising, georeferencing, and creating models of many bridges. Structured query language (SQL) statements are used to efficiently export specific shared information, enabling network cross-analysis. Furthermore, the database represents the source of a geographic information system (GIS) catalogue and the basis for deriving models for building information modelling (BIM). The methodology focuses on the infrastructural context of the Lazio region, Italy, the first beneficiary of the research.
Open AccessAn Integrated Data-Driven System for Digital Bridge Management
Relational databases are established and widespread tools for storing and managing information. The efficient collection of information in a database appears to be a promising solution for bridge management (BM), thus facilitating the digital transition. The Italian regulatory framework on infrastructure operation and maintenance (O&M) is complex and is constantly being updated. The current plan for implementing its guidelines envisages that infrastructure managers, also on a regional scale, equip themselves with their own digital database for BM. Within this context, this research proposes an integrated methodology that collects information derived from project documentation, in situ inspections, digital surveys, and monitoring and field tests in a queryable database for digitalising, georeferencing, and creating models of many bridges. Structured query language (SQL) statements are used to efficiently export specific shared information, enabling network cross-analysis. Furthermore, the database represents the source of a geographic information system (GIS) catalogue and the basis for deriving models for building information modelling (BIM). The methodology focuses on the infrastructural context of the Lazio region, Italy, the first beneficiary of the research.