Dae-Sung Park
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dae-Sung Park has a total of 146 co-authors. Here are the top co-authors by number of shared publications:
- Nini Pryds
Technical University of Denmark
11 shared publications - Alessandro Palliotto
Department of Energy Conversion and Storage Technical University of Denmark Kgs. Lyngby Denmark
6 shared publications - Felix Trier
Technical University of Denmark
5 shared publications - Dragan Damjanovic
Group for Ferroelectrics and Functional Oxides Swiss Federal Institute of Technology-EPFL 1015 Lausanne Switzerland
4 shared publications - Gregory Jon Rees
Department of Materials, University of Oxford, Oxford, UK
4 shared publications - Igor V. Maznichenko
Institute of Physics, Martin Luther University Halle-Wittenberg, 06099 Halle (Saale), Germany
4 shared publications
Latest Publications
- Open Access
- 28 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (35) , 38196-38204
Spontaneously Piezo- and Pyroelectric Polyacrylonitrile Brushes Prepared via Surface-Initiated Polymerization
Surface-initiated polymerizations generate thin films (“brushes”) consisting of polymer chains that are anchored with one chain end to a solid surface. As they are conducted from initiator-modified solid substrates, these polymerizations allow for unidirectional chain growth and enforce a stretched chain conformation. Using acrylonitrile as an example of a monomer with a dipolar side-chain functional group, this study finds that surface-initiated polymerization not only impacts the alignment and conformation of the polymer main chain but can also influence the orientation of side-chain functional groups. Surface-initiated polymerization of acrylonitrile is found to result in polyacrylonitrile (PAN) brushes that display spontaneous pyro- and piezoelectric behavior. As these properties are not observed in spin-cast PAN films, this indicates that surface-initiated growth of PAN enforces an overall parallel orientation of the dipolar nitrile side-chain functional groups. This is supported by polarized FTIR spectroscopy and NEXAFS experiments, which suggest an overall nonisotropic orientation of nitrile groups in the PAN brush, whereas the nitrile groups in the spin-cast PAN film are more isotropically oriented. Pyro- and piezoelectric polymers are attractive for use in sensors, actuators, and energy-harvesting devices but typically require electrical poling, mechanical stretching, or electrospinning to promote the alignment of molecular dipoles and enhance piezo- and pyroelectric properties. The ability to prepare thin polymer films that display spontaneous pyro- and piezoelectric behavior is significant as it renders these postprocessing steps unnecessary.
- 28 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (35) , 38196-38204
Open AccessSpontaneously Piezo- and Pyroelectric Polyacrylonitrile Brushes Prepared via Surface-Initiated Polymerization
Surface-initiated polymerizations generate thin films (“brushes”) consisting of polymer chains that are anchored with one chain end to a solid surface. As they are conducted from initiator-modified solid substrates, these polymerizations allow for unidirectional chain growth and enforce a stretched chain conformation. Using acrylonitrile as an example of a monomer with a dipolar side-chain functional group, this study finds that surface-initiated polymerization not only impacts the alignment and conformation of the polymer main chain but can also influence the orientation of side-chain functional groups. Surface-initiated polymerization of acrylonitrile is found to result in polyacrylonitrile (PAN) brushes that display spontaneous pyro- and piezoelectric behavior. As these properties are not observed in spin-cast PAN films, this indicates that surface-initiated growth of PAN enforces an overall parallel orientation of the dipolar nitrile side-chain functional groups. This is supported by polarized FTIR spectroscopy and NEXAFS experiments, which suggest an overall nonisotropic orientation of nitrile groups in the PAN brush, whereas the nitrile groups in the spin-cast PAN film are more isotropically oriented. Pyro- and piezoelectric polymers are attractive for use in sensors, actuators, and energy-harvesting devices but typically require electrical poling, mechanical stretching, or electrospinning to promote the alignment of molecular dipoles and enhance piezo- and pyroelectric properties. The ability to prepare thin polymer films that display spontaneous pyro- and piezoelectric behavior is significant as it renders these postprocessing steps unnecessary.
- Open Access
Spatially Resolved Strain Mapping In Flexible Oxide Membranes
Strain engineering in single‐crystalline oxide membranes offers a versatile platform to tailor functional properties beyond thin films or bulk materials. However, accurately determining strain transfer and distribution within these membranes remains challenging, limiting direct correlations between structural distortion and functional response and hindering the rational design of flexible devices. Here, high‐resolution synchrotron x‐ray diffraction is used for in situ monitoring of strain in (001)‐oriented membranes on flexible polymer substrates under stretching and bending. This approach enables quantitative determination of in‐plane strain as both macroscopic averages and spatially resolved maps. Macroscopic analysis shows that strain transfer is most efficient in thinner films and leads to distinct strain symmetries under stretching and bending. Spatially resolved measurements reveal local strain heterogeneity that increases with applied stress beyond macroscopic averages. Correlating strain distribution with estimated Curie temperature shifts illustrates how such heterogeneity could translate into spatially non‐uniform functional behavior. Additionally, the setup's sensitivity to crystallographic orientation enables analysis of stacked and twisted architectures, where interlayer strain transfer is effective yet attenuated with distance from the substrate. Altogether, this framework establishes a robust approach for probing oxide membranes, opening pathways toward strain‐engineered flexible devices, multilayer heterostructures, and operando investigations.
Open AccessSpatially Resolved Strain Mapping In Flexible Oxide Membranes
Strain engineering in single‐crystalline oxide membranes offers a versatile platform to tailor functional properties beyond thin films or bulk materials. However, accurately determining strain transfer and distribution within these membranes remains challenging, limiting direct correlations between structural distortion and functional response and hindering the rational design of flexible devices. Here, high‐resolution synchrotron x‐ray diffraction is used for in situ monitoring of strain in (001)‐oriented membranes on flexible polymer substrates under stretching and bending. This approach enables quantitative determination of in‐plane strain as both macroscopic averages and spatially resolved maps. Macroscopic analysis shows that strain transfer is most efficient in thinner films and leads to distinct strain symmetries under stretching and bending. Spatially resolved measurements reveal local strain heterogeneity that increases with applied stress beyond macroscopic averages. Correlating strain distribution with estimated Curie temperature shifts illustrates how such heterogeneity could translate into spatially non‐uniform functional behavior. Additionally, the setup's sensitivity to crystallographic orientation enables analysis of stacked and twisted architectures, where interlayer strain transfer is effective yet attenuated with distance from the substrate. Altogether, this framework establishes a robust approach for probing oxide membranes, opening pathways toward strain‐engineered flexible devices, multilayer heterostructures, and operando investigations.
- Open Access
- 6 January 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (33)
Magnetism and Nonlinear Charge Transport in NiFe 2 O 4 /γ‐Al 2 O 3 /SrTiO 3 Heterostructure: Toward Spintronic Applications
We present the synthesis and study of the magnetic and electronic properties of NiFe 2 O 4 /γ‐Al 2 O 3 /SrTiO 3 heterostructure. The γ‐Al 2 O 3 /SrTiO 3 interface hosts a high‐mobility 2D electron gas (2DEG) with large spin‐orbit coupling, making it promising for spintronic and nano‐electronic device applications if it can be coupled to a suitable source of spin currents. For efficient spin‐charge conversion, a ferromagnetic insulator as a spin current source is more advantageous than a metallic/semiconducting ferromagnet. Here, we synthesize a ferrimagnetic insulating NiFe 2 O 4 (001) layer on γ‐Al 2 O 3 (001)/SrTiO 3 (001) using low‐temperature reactive sputtering at 150 °C without compromising the mobility and charge carrier density of the 2DEG at the γ‐Al 2 O 3 (001)/SrTiO 3 (001) interface. While γ‐Al 2 O 3 (8 nm)/SrTiO 3 is nonmagnetic, NiFe 2 O 4 (52 nm)/γ‐Al 2 O 3 (8 nm)/SrTiO 3 shows a well‐defined magnetic hysteresis loop at room temperature as well as at low temperatures. The sheet resistance of both γ‐Al 2 O 3 (8 nm)/SrTiO 3 and NiFe 2 O 4 (52 nm)/γ‐Al 2 O 3 (8 nm)/SrTiO 3 exhibits metallic behavior down to cryogenic temperatures, with a low temperature upturn driven by the combined effect of Kondo‐like scattering and weak antilocalization. Most importantly, NiFe 2 O 4 (52 nm)/γ‐Al 2 O 3 (8 nm)/SrTiO 3 behaves as a magnetic diode at low temperatures, and its rectification performance increases significantly with increasing magnetic field strength, giving rise to a robust magneto‐electronic rectification effect at low temperatures, which provides a first step toward the development of nanoscale all‐oxide heterostructures capable of efficient spin‐charge conversion.
- 6 January 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (33)
Open AccessMagnetism and Nonlinear Charge Transport in NiFe 2 O 4 /γ‐Al 2 O 3 /SrTiO 3 Heterostructure: Toward Spintronic Applications
We present the synthesis and study of the magnetic and electronic properties of NiFe 2 O 4 /γ‐Al 2 O 3 /SrTiO 3 heterostructure. The γ‐Al 2 O 3 /SrTiO 3 interface hosts a high‐mobility 2D electron gas (2DEG) with large spin‐orbit coupling, making it promising for spintronic and nano‐electronic device applications if it can be coupled to a suitable source of spin currents. For efficient spin‐charge conversion, a ferromagnetic insulator as a spin current source is more advantageous than a metallic/semiconducting ferromagnet. Here, we synthesize a ferrimagnetic insulating NiFe 2 O 4 (001) layer on γ‐Al 2 O 3 (001)/SrTiO 3 (001) using low‐temperature reactive sputtering at 150 °C without compromising the mobility and charge carrier density of the 2DEG at the γ‐Al 2 O 3 (001)/SrTiO 3 (001) interface. While γ‐Al 2 O 3 (8 nm)/SrTiO 3 is nonmagnetic, NiFe 2 O 4 (52 nm)/γ‐Al 2 O 3 (8 nm)/SrTiO 3 shows a well‐defined magnetic hysteresis loop at room temperature as well as at low temperatures. The sheet resistance of both γ‐Al 2 O 3 (8 nm)/SrTiO 3 and NiFe 2 O 4 (52 nm)/γ‐Al 2 O 3 (8 nm)/SrTiO 3 exhibits metallic behavior down to cryogenic temperatures, with a low temperature upturn driven by the combined effect of Kondo‐like scattering and weak antilocalization. Most importantly, NiFe 2 O 4 (52 nm)/γ‐Al 2 O 3 (8 nm)/SrTiO 3 behaves as a magnetic diode at low temperatures, and its rectification performance increases significantly with increasing magnetic field strength, giving rise to a robust magneto‐electronic rectification effect at low temperatures, which provides a first step toward the development of nanoscale all‐oxide heterostructures capable of efficient spin‐charge conversion.
- 26 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (48) , 41172-41183
Epitaxial Strain Engineering of High-Quality Freestanding Single-Crystalline Complex Oxides
Freestanding strongly correlated complex oxide thin films hold great potential in next-generation electronic and energy applications. Their high integrability and tunable properties may surpass those in bulk or epitaxial films. Water-assisted lift-off method is widely used to produce single-crystalline complex oxide membranes. It involves utilizing water-soluble sacrificial oxides such as Sr3Al2O6 (SAO), incorporated during multilayer growth. A key challenge is the incompatibility of direct growth between certain functional oxides (e.g., ferroics) and SAO, along with limited understanding of how film growth impacts both SAO dissolution and subsequent membrane quality. Here, we demonstrate how epitaxial strain engineering of SAO-based heterostructures, combined with overlying oxide layers (SrTiO3 and La0.7Sr0.3MnO3) grown via pulsed laser deposition, yields scalable, high-quality single-crystalline membranes through rapid, reproducible fabrication. Our findings reveal that the epitaxial strain of SAO layer is strongly affected by the subsequent growth condition (e.g., oxygen partial pressure) of upper oxide layers. Minimizing the strain relaxation of the SAO layer is crucial for both the layer-by-layer growth of upper oxide films and efficient dissolution dynamics of SAO. The use of a tetragonally strained SAO layer, remaining under oxygen-reduced conditions throughout the multilayer growth, allows for uniform and rapid (≤10 min) dissolution in water, producing millimeter-scale, microcrack-free, functional single-crystalline oxide membranes. This work provides key insights into how epitaxial growth affects membrane release and quality, providing a robust pathway for reliable, high-performance integration of freestanding oxide membranes using water-soluble layers.
- 26 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (48) , 41172-41183
Epitaxial Strain Engineering of High-Quality Freestanding Single-Crystalline Complex Oxides
Freestanding strongly correlated complex oxide thin films hold great potential in next-generation electronic and energy applications. Their high integrability and tunable properties may surpass those in bulk or epitaxial films. Water-assisted lift-off method is widely used to produce single-crystalline complex oxide membranes. It involves utilizing water-soluble sacrificial oxides such as Sr3Al2O6 (SAO), incorporated during multilayer growth. A key challenge is the incompatibility of direct growth between certain functional oxides (e.g., ferroics) and SAO, along with limited understanding of how film growth impacts both SAO dissolution and subsequent membrane quality. Here, we demonstrate how epitaxial strain engineering of SAO-based heterostructures, combined with overlying oxide layers (SrTiO3 and La0.7Sr0.3MnO3) grown via pulsed laser deposition, yields scalable, high-quality single-crystalline membranes through rapid, reproducible fabrication. Our findings reveal that the epitaxial strain of SAO layer is strongly affected by the subsequent growth condition (e.g., oxygen partial pressure) of upper oxide layers. Minimizing the strain relaxation of the SAO layer is crucial for both the layer-by-layer growth of upper oxide films and efficient dissolution dynamics of SAO. The use of a tetragonally strained SAO layer, remaining under oxygen-reduced conditions throughout the multilayer growth, allows for uniform and rapid (≤10 min) dissolution in water, producing millimeter-scale, microcrack-free, functional single-crystalline oxide membranes. This work provides key insights into how epitaxial growth affects membrane release and quality, providing a robust pathway for reliable, high-performance integration of freestanding oxide membranes using water-soluble layers.
- Open Access
- 26 September 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (3) , e03685
Tunable and Persistent Macroscopic Polarization in Nominally Centrosymmetric Defective Oxides
Introducing symmetry breaking in materials enables the emergence of functionalities. This can be microscopically and macroscopically driven by applying external stimuli such as mechanical stress, electric field, temperature, and chemical modification. For instance, non‐zero net dipole moments are formed in a material with the presence of local charged defects or their clusters, which can alter the crystal structure, charge states, and electrostatic potential across the material. Here, a conceptual approach is demonstrated to defects‐mediated symmetry breaking that allows for built‐in polarization in a nominally centrosymmetric defective oxide, Gd x Ce 1‐ x O 2‐ δ (CGO) films by creating a macroscopic charge asymmetry. These results show that switchable and enduring polarization in CGO films is governed by the electric field‐driven redistribution of oxygen vacancies with a critical field strength of ≈0.5 MV cm −1 at room temperature. This leads to notable and persistent pyroelectric effect with a coefficient of ≈180 µC m −2 K −1 . These findings highlight the potential to develop high‐performance, sustainable, environmentally friendly polar film materials by manipulating ionic defects from their centrosymmetric ground states. This approach provides new opportunities to expand the range of polar materials in current and future energy and electronic applications.
- 26 September 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (3) , e03685
Open AccessTunable and Persistent Macroscopic Polarization in Nominally Centrosymmetric Defective Oxides
Introducing symmetry breaking in materials enables the emergence of functionalities. This can be microscopically and macroscopically driven by applying external stimuli such as mechanical stress, electric field, temperature, and chemical modification. For instance, non‐zero net dipole moments are formed in a material with the presence of local charged defects or their clusters, which can alter the crystal structure, charge states, and electrostatic potential across the material. Here, a conceptual approach is demonstrated to defects‐mediated symmetry breaking that allows for built‐in polarization in a nominally centrosymmetric defective oxide, Gd x Ce 1‐ x O 2‐ δ (CGO) films by creating a macroscopic charge asymmetry. These results show that switchable and enduring polarization in CGO films is governed by the electric field‐driven redistribution of oxygen vacancies with a critical field strength of ≈0.5 MV cm −1 at room temperature. This leads to notable and persistent pyroelectric effect with a coefficient of ≈180 µC m −2 K −1 . These findings highlight the potential to develop high‐performance, sustainable, environmentally friendly polar film materials by manipulating ionic defects from their centrosymmetric ground states. This approach provides new opportunities to expand the range of polar materials in current and future energy and electronic applications.
- Open Access
- 25 September 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (12)
Leveraging high fluence and low pressure for pulsed laser deposition of high-mobility γ-Al2O3/SrTiO3 heterostructure growth
High-mobility oxide heterostructures could be applied for high-frequency devices, transparent conductors, and spin–orbit logic devices. SrTiO3 is one of the most studied oxide substrate materials for heterostructures. To date, the highest SrTiO3-based charge carrier mobility at 2 K was measured in the interfacial two-dimensional electron gas (2DEG) of γ-Al2O3/SrTiO3. The formation mechanism and the origin of the high electron mobility are not yet fully understood. This investigation presents a successful growth protocol to synthesize high-mobility γ-Al2O3/SrTiO3 interfaces, and a description of the underlying growth optimization. Furthermore, indicative features of high-mobility γ-Al2O3/SrTiO3, including the room-temperature sheet resistance, are presented. Signs of epitaxial and crystalline growth are found in a high-mobility sample (μ10K=1.6×104 cm2/V s). Outlining the growth mechanisms and comparing 40 samples, indicates that low pressure (P≈1×10−6 mbar) is essential for high-mobility γ-Al2O3/SrTiO3 interfaces. γ-Al2O3 having single-element cations allows higher laser fluences during growth, compared to thin films with multi-element cations such as LaAlO3, without causing stoichiometric imbalances.
- 25 September 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (12)
Open AccessLeveraging high fluence and low pressure for pulsed laser deposition of high-mobility γ-Al2O3/SrTiO3 heterostructure growth
High-mobility oxide heterostructures could be applied for high-frequency devices, transparent conductors, and spin–orbit logic devices. SrTiO3 is one of the most studied oxide substrate materials for heterostructures. To date, the highest SrTiO3-based charge carrier mobility at 2 K was measured in the interfacial two-dimensional electron gas (2DEG) of γ-Al2O3/SrTiO3. The formation mechanism and the origin of the high electron mobility are not yet fully understood. This investigation presents a successful growth protocol to synthesize high-mobility γ-Al2O3/SrTiO3 interfaces, and a description of the underlying growth optimization. Furthermore, indicative features of high-mobility γ-Al2O3/SrTiO3, including the room-temperature sheet resistance, are presented. Signs of epitaxial and crystalline growth are found in a high-mobility sample (μ10K=1.6×104 cm2/V s). Outlining the growth mechanisms and comparing 40 samples, indicates that low pressure (P≈1×10−6 mbar) is essential for high-mobility γ-Al2O3/SrTiO3 interfaces. γ-Al2O3 having single-element cations allows higher laser fluences during growth, compared to thin films with multi-element cations such as LaAlO3, without causing stoichiometric imbalances.
- Open Access
- 7 August 2025
- Published by Wiley in Advanced Physics Research
- Vol. 4 (10)
Strain Engineering of Complex Oxide Membranes on Flexible Metallic Support
Controlling material functionalities via external stimuli is a cornerstone of modern science and technology. One effective strategy involves tuning mechanical strain, which can be induced through lattice mismatch, electric fields, or applied mechanical force. Recent advances in fabricating freestanding single‐crystalline complex oxide membranes have opened new opportunities for integrating these materials onto previously incompatible platforms such as metals and flexible polymers for next‐generation device applications. A key step in strain engineering is understanding and controlling the integration of such materials with flexible substrates. In this study, the integration and adhesion of freestanding single‐crystalline La0.7Sr0.3MnO3 (LSMO(001)) membranes onto metallic surfaces (Au, Pt, and TiN) coated on flexible polymer substrates is demonstrated. It is found that the choice of metal underlayer significantly influences the ability to strain the membrane. Using TiN‐coated polymer support, a uniform strain of ≈1% in LSMO membranes, along with strong adhesion between the membrane and substrate, is achieved. Theoretical calculations reveal that strong Ti─O bonding and compact in‐plane lattice matching at the LSMO(001)/TiN(111) interface lower the interface formation energy compared to noble metals. These findings offer valuable insights for selecting suitable platforms to apply external mechanical stress to freestanding oxide membranes, facilitating their integration into flexible electronic systems.
- 7 August 2025
- Published by Wiley in Advanced Physics Research
- Vol. 4 (10)
Open AccessStrain Engineering of Complex Oxide Membranes on Flexible Metallic Support
Controlling material functionalities via external stimuli is a cornerstone of modern science and technology. One effective strategy involves tuning mechanical strain, which can be induced through lattice mismatch, electric fields, or applied mechanical force. Recent advances in fabricating freestanding single‐crystalline complex oxide membranes have opened new opportunities for integrating these materials onto previously incompatible platforms such as metals and flexible polymers for next‐generation device applications. A key step in strain engineering is understanding and controlling the integration of such materials with flexible substrates. In this study, the integration and adhesion of freestanding single‐crystalline La0.7Sr0.3MnO3 (LSMO(001)) membranes onto metallic surfaces (Au, Pt, and TiN) coated on flexible polymer substrates is demonstrated. It is found that the choice of metal underlayer significantly influences the ability to strain the membrane. Using TiN‐coated polymer support, a uniform strain of ≈1% in LSMO membranes, along with strong adhesion between the membrane and substrate, is achieved. Theoretical calculations reveal that strong Ti─O bonding and compact in‐plane lattice matching at the LSMO(001)/TiN(111) interface lower the interface formation energy compared to noble metals. These findings offer valuable insights for selecting suitable platforms to apply external mechanical stress to freestanding oxide membranes, facilitating their integration into flexible electronic systems.
- Open Access
- 1 March 2025
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 12 (1)
Defect-induced magnetic symmetry breaking in oxide materials
Magnetic properties of crystalline solids are fundamental to a wide range of applications, capturing the attention of a vast scientific community. Thus, engineering magnetic order in materials such as ferromagnetism and antiferromagnetism holds great scientific and technological interest. Defects such as vacancies, interstitials, and dopants induce local perturbations within the crystal lattice. These perturbations locally disturb the entire symmetry of crystals, resulting in symmetry breaking. Oxides, in particular, exhibit intriguing properties when subjected to defects, which can lead to significant modifications in their structural, electronic, and magnetic properties. Such defects in non-magnetic oxides can induce magnetic symmetry breaking, leading to the formation of emergent magnetic domains and orderings. In this review, we focus on the recent progress in magnetic breaking symmetries in materials via defect engineering and present our perspectives on how these may lead to new understanding and applications.
- 1 March 2025
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 12 (1)
Open AccessDefect-induced magnetic symmetry breaking in oxide materials
Magnetic properties of crystalline solids are fundamental to a wide range of applications, capturing the attention of a vast scientific community. Thus, engineering magnetic order in materials such as ferromagnetism and antiferromagnetism holds great scientific and technological interest. Defects such as vacancies, interstitials, and dopants induce local perturbations within the crystal lattice. These perturbations locally disturb the entire symmetry of crystals, resulting in symmetry breaking. Oxides, in particular, exhibit intriguing properties when subjected to defects, which can lead to significant modifications in their structural, electronic, and magnetic properties. Such defects in non-magnetic oxides can induce magnetic symmetry breaking, leading to the formation of emergent magnetic domains and orderings. In this review, we focus on the recent progress in magnetic breaking symmetries in materials via defect engineering and present our perspectives on how these may lead to new understanding and applications.
- Open Access
- 24 October 2024
- Published by Springer Nature in Journal of Materials Research
- Vol. 39 (21) , 2907-2917
The fabrication of freestanding complex oxide membranes: Can we avoid using water?
Recent advances in fabricating scalable two-dimensional or freestanding functional materials have shown promise for their use in modern silicon-based electronics and future technologies. A growing interest is in creating freestanding complex oxide membranes using new methods like epitaxial lift-off and mechanical exfoliation to enhance their quality and integrity. Despite these advances, it remains challenging to consistently produce high-quality freestanding oxide membranes on a large scale for practical use. This perspective paper provides an overview of release-and-transfer techniques for fabricating freestanding single-crystalline complex oxide layers, which are initially grown epitaxially. Specifically, we systematically explore the advantages and disadvantages of water-assisted exfoliation of freestanding oxide layers, which have been widely adopted using a water-soluble sacrificial layer in recent years. Furthermore, we compare this approach with other methods to navigate future directions in oxide layer transfer technology, considering material selections, fabrication processes, and functionalization strategies. Graphical abstract
- 24 October 2024
- Published by Springer Nature in Journal of Materials Research
- Vol. 39 (21) , 2907-2917
Open AccessThe fabrication of freestanding complex oxide membranes: Can we avoid using water?
Recent advances in fabricating scalable two-dimensional or freestanding functional materials have shown promise for their use in modern silicon-based electronics and future technologies. A growing interest is in creating freestanding complex oxide membranes using new methods like epitaxial lift-off and mechanical exfoliation to enhance their quality and integrity. Despite these advances, it remains challenging to consistently produce high-quality freestanding oxide membranes on a large scale for practical use. This perspective paper provides an overview of release-and-transfer techniques for fabricating freestanding single-crystalline complex oxide layers, which are initially grown epitaxially. Specifically, we systematically explore the advantages and disadvantages of water-assisted exfoliation of freestanding oxide layers, which have been widely adopted using a water-soluble sacrificial layer in recent years. Furthermore, we compare this approach with other methods to navigate future directions in oxide layer transfer technology, considering material selections, fabrication processes, and functionalization strategies. Graphical abstract