Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Francesca Russo has a total of 154 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Microplastics removal from domestic wastewater of dryer machine by using vacuum membrane distillation (VMD)

    by Francesca Russo, Stefania Palermo, Francesco Galiano, Fabio Bazzarelli, Alessandra Criscuoli, Alberto Figoli

    Wastewater from household washing and drying machines has become a major environmental concern due to continuous microplastics (MPs) release. This study, for the first time, investigated the use of Vacuum (VMD) to treat real wastewater produced by a domestic dryer containing synthetic MPs, together with detergent residues, inorganic compounds and other dissolved species. A polypropylene (PP) membrane was used and characterized to assess its structural and surface properties. The VMD system was tested at different temperatures (40°C, 50°C, and 60°C) and the membrane performance and stability over time were evaluated by concentrating the feed. To identify and quantify MPs and related contaminants in the real feed solution, as well as to determine the efficiency of VMD, several analytical methods were applied, including gravimetric analysis, Total Carbon (TC) measurement, Dynamic Light Scattering (DLS), Scanning Electron Microscopy (SEM), and elemental analysis (EDX and WDS). A particle concentration factor (CPparticle) of 2.4 was achieved after 6 hours with a good recovery of the membrane performance after cleaning, confirming VMD as a promising process for removing MPs and related contaminants from real domestic wastewater.

  • Open Access

    Nanostructured Cellulose Acetate Membranes Embedded with Al2O3 Nanoparticles for Sustainable Wastewater Treatment

    by Ines Elaissaoui, Soumaya Sayeb, Mouna Mekki, Francesca Russo, Alberto Figoli, Karima Horchani-Naifer, Dorra Jellouli Ennigrou

    Electrospun nanofiber membranes based on cellulose acetate (CA) have gained increasing attention for wastewater treatment due to their high surface area, tuneable structure, and ease of functionalization. In this study, the performance of CA membranes was enhanced by incorporating aluminum oxide (Al2O3) nanoparticles (NPs) at varying concentrations (0–2 wt.%). The structural, morphological, and thermal properties of the resulting CA/Al2O3 nanocomposite membranes were investigated through FTIR, XRD, SEM, water contact angle (WCA), pore size measurements, and DSC analyses. FTIR and XRD confirmed strong interactions and the uniform dispersion of the Al2O3 NPs within the CA matrix. The incorporation of Al2O3 improved membrane hydrophilicity, reducing the WCA from 107° to 35°, and increased the average pore size from 0.62 µm to 0.86 µm. These modifications led to enhanced filtration performance, with the membrane containing 2 wt.% Al2O3 achieving a 99% removal efficiency for Indigo Carmine (IC) dye, a maximum adsorption capacity of 45.59 mg/g, and a high permeate flux of 175.47 L·m−2 h−1 bar−1. Additionally, phytotoxicity tests using Lactuca sativa seeds showed a significant increase in germination index from 20% (untreated) to 88% (treated), confirming the safety of the permeate for potential reuse in agricultural irrigation. These results highlight the effectiveness of Al2O3-modified CA electrospun membranes for sustainable wastewater treatment and water reuse.


  • Open Access

    Sustainable Membrane Preparation: Approaches Using Cellulose Acetate as a Biopolymer and Ethyl Lactate as a Green Solvent

    by Giuseppe Di Luca, Francesco Galiano, Francesca Russo, Sergio Tornaghi, Emanuele Di Nicolò, Raffaella Mancuso, Bartolo Gabriele, Alberto Figoli


  • Open Access

    The State of the Art on PVDF Membrane Preparation for Membrane Distillation and Membrane Crystallization: Towards the Use of Non-Toxic Solvents

    by Aqsa Mansoor Khan, Francesca Russo, Francesca Macedonio, Alessandra Criscuoli, Efrem Curcio, Alberto Figoli

    Most parts of the earth are covered with water, but only 0.3% of it is available to living beings. Industrial growth, fast urbanization, and poor water management have badly affected the water quality. In recent years, a transition has been seen from the traditional (physical, chemical) wastewater treatment methods towards a greener, sustainable, and scalable membrane technology. Even though membrane technology offers a green pathway to address the wastewater treatment issue on a larger scale, the fabrication of polymeric membranes from toxic solvents is an obstacle in making it a fully green method. The concept of green chemistry has encouraged scientists to engage in research for new biodegradable and non-protic solvents to replace with already existing toxic ones. This review outlines the use of non-toxic solvents for the preparation of PVDF membranes and their application in membrane distillation and membrane crystallization.


  • Open Access

    Terephthalic-co-glycerol-g-fumaric Acid: A Promising Nanopolymer for Enhancing PPSU Membrane Properties

    by Harith A. Alani, Qusay F. Alsalhy, Saad Al-Saadi, Faris H. Alani, Hicham Meskher, Raed A. Al-Juboori, Francesca Russo, Giampiero Chiappetta, Giuseppe Di Luca, Alberto Figoli

    This study introduces an innovative approach to modifying polyphenylsulfone (PPSU) membranes for wastewater treatment applications. Terephthalic-co-glycerol-g-fumaric acid (TGF) was used as an innovative nanopolymer pore former. By incorporating TGF at varying concentrations, our research investigates its effects on the morphological and surface properties of PPSU membranes. Two different solvents were used to dissolve PPSU, optimizing the properties of the fabricated membranes. The resultant PPSU/TGF membranes were systematically characterized regarding topography, morphological changes, hydrophilicity, chemical composition, and performance against protein and synthetic dyes. Experimental results revealed that adding TGF resulted in a smoother membrane surface. With 6% TGF inclusion in the casting solution, a more porous structure was achieved, as confirmed by SEM analysis, along with significant improvements in porosity and a near doubling of pore size. Although the hydrophilicity of the membranes exhibited only minor enhancement, performance evaluation demonstrated a substantial increase in pure water flux, with an improvement of more than fourfold. Moreover, the retention of BSA and two synthetic dyes was found to be directly proportional to the concentration of the nanopolymer pore former used. These findings highlight the potential advantages of TGF/PPSU membranes for protein separation and synthetic dye separation applications, underscoring their viability for wastewater treatment.


  • Open Access

    Green Synthesis of Cellulose Acetate Mixed Matrix Membranes: Structure–Function Characterization

    by Andrea Torre-Celeizabal, Francesca Russo, Francesco Galiano, Alberto Figoli, Clara Casado-Coterillo, Aurora Garea

    Although membrane technology is widely used in different gas separation applications, membrane manufacturers need to reduce the environmental impact during the membrane fabrication process within the framework of the circular economy by replacing toxic solvents, oil-based polymers, and such by more sustainable alternatives. These include environmentally friendly materials, such as biopolymers, green solvents, and surfactant free porous fillers. This work promotes the use of environmentally sustainable and low toxic alternatives, introducing the novel application of cellulose acetate (CA) as a biopolymer in combination with dimethyl carbonate (DMC) as a greener solvent and different inorganic fillers (Zeolite-A, ETS-10, AM-4 and ZIF-8) prepared without the use of toxic solvents or reactants. Hansen Solubility Parameters were used to confirm the polymer-solvent affinity. Pure CA and mixed matrix membranes were characterized regarding their hydrophilicity by water uptake and contact angle measurements, thermal stability by TGA, mechanical resistance, ATR-FTIR and scanning electron microscopy before evaluating the gas separation performance by single gas permeability of N2, CH4, and CO2. Conditioning of the CA membranes is observed causing reduction of the CO2 permeability values from 12,600 Barrer for the fresh 0.5 wt % ETS-10/CA membrane to 740 Barrer for the 0.5 wt % ZIF-8/CA membranes, corresponding to 24% and 4.2% reductions in CO2/CH4 selectivity and 30% and 24% increase in CO2/N2 selectivity for the same membranes. The structure-relationship was evaluated by phenomenological models which are useful at low filler loading considering flux direction and particle shape and size but still fail to explain the interactions between the DMC green solvent and CA matrix and fillers that are influencing gas transport performance different than other CA membranes.


  • Open Access

    Cyrene-Enabled Green Electrospinning of Nanofibrous Graphene-Based Membranes for Water Desalination via Membrane Distillation

    by Antonios Keirouz, Francesco Galiano, Francesca Russo, Enrica Fontananova, Bernardo Castro-Dominguez, Alberto Figoli, Davide Mattia, Hannah S. Leese

    High-performance and sustainable membranes for water desalination applications are crucial to address the growing global demand for clean water. Concurrently, electrospinning has emerged as a versatile manufacturing method for fabricating nanofibrous membranes for membrane distillation. However, widespread adoption of electrospinning for processing water-insoluble polymers, such as fluoropolymers, is hindered by the reliance on hazardous organic solvents during production. Moreover, restrictions on industrial solvents are tightening as environmental regulations demand greener alternatives. This critical challenge is addressed here by demonstrating, for the first time, the fabrication of nanofibrous electrospun membranes of PVDF-HFP, poly(vinylidene fluoride)-co-hexafluoropropylene using a renewable, environment- and user-friendly solvent system containing Cyrene (dihydrolevoglucosenone), dimethyl sulfoxide, and dimethyl carbonate. The same solvent system was further used to produce nanocomposite graphene oxide (GO) and graphene nanoplatelet (GNP)-containing nanofibrous electrospun membranes. When tested for water desalination via membrane distillation, these membranes either outperformed or matched the performance of those produced with hazardous organic solvents, achieving salt rejection rates of >99.84% and long-term stability. The economic viability of the green solvent system was further validated through Monte Carlo simulations. This work demonstrates the potential to move fluoropolymer electrospinning from dimethylformamide-based systems to greener alternatives, enabling the consistent production of high-quality nanofibrous membranes. These findings pave the way for more sustainable manufacturing practices in membrane technology, specifically for water desalination via membrane distillation.


  • Open Access

    Enhancing the Separation Performance of Chitosan Membranes Through the Blending with Deep Eutectic Solvents for the Pervaporation of Polar/Non-Polar Organic Mixtures

    by Francesco Galiano, Asma Msahel, Francesca Russo, Natalia Rovella, Alfonso Policicchio, Sofiane Ben Hamouda, Amor Hafiane, Roberto Castro-Muñoz, Alberto Figoli

    This study explores the development of chitosan-based membranes blended with three distinct deep eutectic solvents (DESs) for the pervaporation separation of methanol and methyl tert-butyl ether. DESs were selected for their eco-friendly properties and their potential to enhance membrane performance. The chitosan (CS) membranes, both crosslinked and non-crosslinked, were characterized in terms of morphology, chemical composition, wettability, mechanical resistance, and solvent uptake. Pervaporation tests revealed that incorporating DESs significantly enhanced the membranes’ selective permeability toward methanol, with up to a threefold increase in separation efficiency compared to pristine CS membranes. The membranes demonstrated a strong dependence on feed temperature, with higher temperatures improving permeation flux but reducing separation factor. Crosslinking with glutaraldehyde further increased membrane selectivity by reducing free volume into the polymer matrix. These findings underscore the potential of DESs as green additives for improving the performance of biopolymer membranes, making them promising candidates for efficient and eco-friendly organic–organic separations.


  • Open Access

    Synthesis and Characterization of Polyaniline Emeraldine Salt (PANI-ES) Colloids Using Potato Starch as a Stabilizer to Enhance the Physicochemical Properties and Processability

    by Soufiane Boudjelida, Xue Li, Souad Djellali, Giampiero Chiappetta, Francesca Russo, Alberto Figoli, Mauro Carraro

    Conductive polymers, such as polyaniline (PANI), have interesting applications, ranging from flexible electronics, energy storage devices, sensors, antistatic or anticorrosion coatings, etc. However, the full exploitation of conductive polymers still poses a challenge due to their low processability. The use of compatible stabilizers to obtain dispersible and stable colloids is among the possible solutions to overcome such drawbacks. In this work, potato starch was used as a steric stabilizer for the preparation of colloidal polyaniline (emeraldine salt, ES)/starch composites by exploiting the oxidative polymerization of aniline in aqueous solutions with various starch-to-aniline ratios. The polyaniline/starch bio-composites were subjected to structural, spectroscopic, thermal, morphological, and electrochemical analyses. The samples were then tested for their dispersibility/solubility in a range of organic solvents. The results demonstrated the formation of PANI/starch biocomposites with a smaller average size than starch particles, showing improved aqueous dispersion and enhanced solubility in organic solvents. With respect to previously reported PANI-EB (emeraldine base)/starch composites, the novel colloids displayed a lower overall crystallinity, but the conductive nature of PANI-ES enhanced its electrochemical properties, resulting in richer redox chemistry, particularly evident in its oxidation behavior, as observed through cyclic voltammetry. Finally, as proof of the improved processability, the colloids were successfully integrated into a thin polyether sulfone (PES) membrane.


  • Open Access

    Synthesis and Characterization of Polyaniline Emeraldine Salt (PANI-ES) Colloids Using Potato Starch as a Stabilizer, to Enhance the Physicochemical Properties and Processibility

    by Soufiane Boudjelida, Xue Li, Souad Djellali, Giampiero Chiappetta, Francesca Russo, Alberto Figoli, Mauro Carraro

    The processability of conductive polymers such as polyaniline (PANI) still poses a challenge due to their properties. The use of stabilizers, compatible and able to interact with PANI, to obtain dispersible and stable colloids is described in this work. To this aim, potato starch has been used as a steric stabilizer for the preparation of polyaniline (emeraldine salt, ES)/starch biocomposites, by exploiting oxidative polymerization of aniline in aqueous solutions containing different ratios of aniline and starch (% w/w). The polyaniline/starch biocomposites were subjected to structural and spectroscopic analyses, thermal analysis, morphological analysis and electrochemical analysis. The samples were then tested for their dispersibility/solubility in various organic solvents. The results showed the formation of PANI/starch biocomposites with an overall smaller size than starch particles, with improved aqueous dispersion and solubility in organic solvents. Although X-ray diffraction and differential scanning calorimetry analyses indicated a loss of crystallinity in the biocomposites, the cyclic voltammetry tests showed that all PANI ES/starch biocomposites display improved redox exchange properties.