Marco Restano

ALtimetry for BIOMass (ALBIOM) is a Permanent Open Call Project funded by the European Space Agency (ESA) to explore the possibility of forest biomass retrieval by using Copernicus Sentinel-3 (S-3) Synthetic aperture Radar ALtimeter (SRAL) in low- and high-resolution mode at Ku- and C-bands. It represents an original work in the research of new techniques for vegetation observation using altimetry data. Because of the complexity of the land surfaces, no algorithm has been developed for a specific retracking of the altimetric land waveform. This calls for the development of a model able to reproduce the acquisition system and the target scattering phenomena to simulate the interaction of the radar pulse with the land. In this first work, we present the electromagnetic simulator of S-3 SRAL altimeter measurements over bare soil scenarios realized through a modification of the Soil and Vegetation Reflection Simulator (SAVERS) simulator developed by the team for Global Navigation Satellite System Reflectometry (GNSS-R) over land. The impact of topography has also been taken into account. We demonstrate that SAVERS for S-3 SRAL proved its capability to reproduce altimeter waveforms’ main attributes for both flat and topography scenarios.

Forests play a crucial role in the climate change mitigation by acting as sinks for carbon and, consequently, reducing the CO2 concentration in the atmosphere and slowing global warming. For this reason, above ground biomass (AGB) estimation is essential for effectively monitoring forest health around the globe. Although remote sensing-based forest AGB quantification can be pursued in different ways, in this work, we discuss a new technique for vegetation observation through the use of altimetry data that have been introduced by the ESA-funded ALtimetry for BIOMass (ALBIOM) project. ALBIOM investigates the possibility of retrieving forest biomass through Copernicus Sentinel-3 Synthetic Aperture Radar Altimeter (SRAL) measurements at the Ku- and C-bands in low- and high-resolution modes. To reach this goal, a simulator able to reproduce the altimeter acquisition system and the scattering phenomena that occur in the interaction of the radar altimeter pulse with vegetated surfaces has been developed. The Tor Vergata Vegetation Scattering Model (TOVSM) developed at Tor Vergata University has been exploited to simulate the contribution from the vegetation volume via the modeling of the backscattering of forest canopy through a discrete scatterer representation. A modification of the Soil And Vegetation Reflection Simulator (SAVERS) developed by the team for Global Navigation Satellite System Reflectometry over land has also been taken into account to simulate the soil contribution.

The sea level retrievals from the latest generation of radar altimeters (the SAR altimeters) are still challenging in the coastal zone and areas covered by sea ice and require a dedicated fitting (retracking) strategy for the waveforms. In the framework of the European Space Agency’s Baltic + Sea Level (ESA Baltic SEAL) project, an empirical retracking strategy (ALES + SAR), including a dedicated sea state bias correction, has been designed to improve the sea level observations in the Baltic Sea, characterised by a jagged coastline and seasonal sea ice coverage, without compromising the quality of open ocean data. In this work, the performances of ALES + SAR are validated against in-situ data in the Baltic Sea. Moreover, variance, crossover differences and power spectral density of the open ocean data are evaluated on a global scale. The results show that ALES + SAR performances are of comparable quality to the ones obtained using physical-based retrackers, with relevant advantages in coastal and sea ice areas in terms of quality and quantity of the sea level data.

The monitoring of rivers by satellite is an up-to-date subject in hydrological studies as confirmed by the interest of space agencies to finance specific missions that respond to the quantification of surface water flows. We address the problem by using multi-spectral sensors, in the near-infrared (NIR) band, correlating the reflectance ratio between a dry and a wet pixel extracted from a time series of images, the C/M ratio, with five river flow-related variables: water level, river discharge, flow area, mean flow velocity and surface width. The innovative aspect of this study is the use of the Ocean and Land Colour Instrument (OLCI) on board Sentinel-3 satellites, compared to the Moderate Resolution Imaging Spectroradiometer (MODIS) used in previous studies. Our results show that the C/M ratio from OLCI and MODIS is more correlated with the mean flow velocity than with other variables. To improve the number of observations, OLCI and MODIS products are combined into multi-mission time series. The integration provides good quality data at around daily resolution, appropriate for the analysis of the Po River investigated in this study. Finally, the combination of only MODIS products outperforms the other configurations with a frequency slightly lower (~1.8 days).

The scope of this presentation is to feature the G-POD SARvatore service to users for the exploitation of CryoSat-2 and Sentinel-3 data, which was designed and developed by the Altimetry Team in the R&D division at ESA-ESRIN. The G-POD service coined SARvatore (SAR Versatile Altimetric Toolkit for Ocean Research & Exploitation) is a web platform that allows any scientist to process on-line, on-demand and with user-selectable configuration CryoSat-2 SAR/SARin and Sentinel-3 SAR data, from L1A (FBR) data products up to SAR/SARin Level-2 geophysical data products. The G-POD graphical interface allows users to select a geographical area of interest within the time-frame related to the Cryosat-2 SAR/SARin FBR and Sentinel-3 L1A data products availability in the service catalogue. The processor prototype is versatile, allowing users to customize and to adapt the processing according to their specific requirements by setting a list of configurable options. Pre-defined processing configurations (Official CryoSat-2, Official Sentinel-3, Open Ocean, Coastal Zone, Inland Water (20Hz & 80Hz), Ice and Sea-Ice) are available. After the task submission, users can follow, in real time, the status of the processing. The output data products are generated in standard NetCDF format, therefore being compatible with the multi-mission “Broadview Radar Altimetry Toolbox” (BRAT, http://www.altimetry.info) and typical tools.Initially, the processing was designed and optimized uniquely for open ocean studies. It was based on the SAMOSA model developed for the Sentinel-3 Ground Segment. However, since June 2015, the SAMOSA+ retracker is available as a dedicated retracker for coastal zone, inland water and sea-ice/ice-sheet. A new retracker (SAMOSA++) has been recently developed and will be made available in the future. The scope is to maximize the exploitation of CryoSat-2 and Sentinel-3 data over all surfaces providing user with specific processing options not available in the default processing chains.Recent improvements include: 1) A Join & Share Forum to allow users to post questions and report issues (https://wiki.services.eoportal.org/tiki-custom_home.php); 2) A data repository to better support the growing Altimetry Community avoiding the redundant reprocessing of already processed data (https://wiki.services.eoportal.org/tiki-index.php?page=SARvatore+Data+Repository&highlight=repository); 3) A new function in the GUI allowing users to compute the geodetic distance between selected points on the map; 4) A new function in the GUI to filter the products search to a specific RON (Relative Orbit Number) and to a specific pass direction (Ascending or Descending). Furthermore, users will find in the folder SUM_RESDIR of the output data package a short summary report with information on the products that have not been processed and instructions on how to eventually try to re-process the missing data.To respond to the request of hydrologists, and simulate data that a river gauge would provide, SARvatore  will soon include a post-processing service to convert water level estimates in L2 data to virtual station water level values,  which are typically required by hydrologists. Validation of SARvatore data over river targets will be presented to demonstrate the potential of both the SAMOSA+/++ retrackers and the innovative processing configurations not available in the default CryoSat-2 and Sentinel-3 processing chains.

11th Coastal Altimetry Workshop; Frascati, Italy, 12–15 June 2018