Anouk S. Goossens
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anouk S. Goossens has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Tamalika Banerjee
University of Groningen
9 shared publications A. Das
Zernike Institute for Advanced Materials, University of Groningen , 9747 AG Groningen, The Netherlands
1 shared publication- Alexandre Gloter
Laboratoire de Physique des Solides
1 shared publication Arijit Das
Univ. of Groningen (Netherlands)
1 shared publicationAzminul Jaman
University of Groningen
1 shared publicationBart J. Kooi
Groningen Cognitive Systems and Materials Center University of Groningen Groningen The Netherlands
1 shared publication
Latest Publications
- Open Access
- 1 June 2025
- Published by AIP Publishing in APL Electronic Devices
- Vol. 1 (2)
Synaptic plasticity in Co/Nb:STO memristive devices: The role of oxygen vacancies
Neuromorphic computing aims to develop energy-efficient devices that mimic biological synapses. One promising approach involves memristive devices that can dynamically adjust their electrical resistance in response to stimuli, similar to synaptic weight changes in the brain. However, a key challenge is understanding and controlling the coexistence of different types of synaptic plasticity, such as short-term and long-term plasticity. In this work, we show that plasticity behaviors in Co/Nb:STO Schottky memristors originate from oxygen vacancy electromigration, which modulates the Schottky barrier and enables both short-term and long-term plasticity. Our experiments reveal that resistance changes follow a power-law during reading (short-term plasticity) and increase stepwise with successive pulses (long-term memory retention). These behaviors are successfully reproduced by our model, which demonstrates the correlation between oxygen vacancy distribution and Schottky barrier modulation. Our findings highlight these memristors as promising candidates for neuromorphic applications.
- 1 June 2025
- Published by AIP Publishing in APL Electronic Devices
- Vol. 1 (2)
Open AccessSynaptic plasticity in Co/Nb:STO memristive devices: The role of oxygen vacancies
Neuromorphic computing aims to develop energy-efficient devices that mimic biological synapses. One promising approach involves memristive devices that can dynamically adjust their electrical resistance in response to stimuli, similar to synaptic weight changes in the brain. However, a key challenge is understanding and controlling the coexistence of different types of synaptic plasticity, such as short-term and long-term plasticity. In this work, we show that plasticity behaviors in Co/Nb:STO Schottky memristors originate from oxygen vacancy electromigration, which modulates the Schottky barrier and enables both short-term and long-term plasticity. Our experiments reveal that resistance changes follow a power-law during reading (short-term plasticity) and increase stepwise with successive pulses (long-term memory retention). These behaviors are successfully reproduced by our model, which demonstrates the correlation between oxygen vacancy distribution and Schottky barrier modulation. Our findings highlight these memristors as promising candidates for neuromorphic applications.
- 17 February 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (12) , e2416963
Polarization Boost and Ferroelectricity Down to One Unit Cell in Layered Carpy‐Galy La2Ti2O7 Thin Films
Layered perovskite‐based compounds offer a range of unconventional properties enabled by their naturally anisotropic structure. Among these, the Carpy‐Galy phases (AnBnO3n+2), characterized by (110)‐oriented perovskite planes interleaved with additional oxygen layers, stand out for robust in‐plane polarization. However, the challenges associated with the synthesis of ultrathin Carpy‐Galy films and understanding the impact of strain on their properties limit their integration into devices. Here, La2Ti2O7 (n = 4) films grown on substrates imposing tensile, compressive, or negligible epitaxial strains are investigated. Surprisingly, a 3% tensile strain from DyScO3 (100) substrates facilitates layer‐by‐layer growth mode, whereas compressive (LaAlO3‐Sr2TaAlO6 (110)) or negligible (SrTiO3 (110)) epitaxial strains require post‐deposition annealing to reach comparable crystallinity. Using density‐functional theory calculations, scanning probe microscopy, X‐ray diffraction, scanning transmission electron microscopy, and polarization switching experiments, it is confirmed that these films possess exceptional ferroelectric properties, including a polarization of 18 µCcm−2 – more than three times higher than previously reported – as well as persistence of ferroelectricity down to a single‐unit‐cell thickness. This study not only advances the understanding of Carpy‐Galy phases as epitaxial thin films but also lays a foundation for their integration into advanced ferroelectric device architectures.
- 17 February 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (12) , e2416963
Polarization Boost and Ferroelectricity Down to One Unit Cell in Layered Carpy‐Galy La2Ti2O7 Thin Films
Layered perovskite‐based compounds offer a range of unconventional properties enabled by their naturally anisotropic structure. Among these, the Carpy‐Galy phases (AnBnO3n+2), characterized by (110)‐oriented perovskite planes interleaved with additional oxygen layers, stand out for robust in‐plane polarization. However, the challenges associated with the synthesis of ultrathin Carpy‐Galy films and understanding the impact of strain on their properties limit their integration into devices. Here, La2Ti2O7 (n = 4) films grown on substrates imposing tensile, compressive, or negligible epitaxial strains are investigated. Surprisingly, a 3% tensile strain from DyScO3 (100) substrates facilitates layer‐by‐layer growth mode, whereas compressive (LaAlO3‐Sr2TaAlO6 (110)) or negligible (SrTiO3 (110)) epitaxial strains require post‐deposition annealing to reach comparable crystallinity. Using density‐functional theory calculations, scanning probe microscopy, X‐ray diffraction, scanning transmission electron microscopy, and polarization switching experiments, it is confirmed that these films possess exceptional ferroelectric properties, including a polarization of 18 µCcm−2 – more than three times higher than previously reported – as well as persistence of ferroelectricity down to a single‐unit‐cell thickness. This study not only advances the understanding of Carpy‐Galy phases as epitaxial thin films but also lays a foundation for their integration into advanced ferroelectric device architectures.
- 10 September 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (9)
Symmetry-driven large tunneling magnetoresistance in magnetic tunnel junctions with perpendicular magnetic anisotropy- 10 September 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (9)
Symmetry-driven large tunneling magnetoresistance in magnetic tunnel junctions with perpendicular magnetic anisotropy- Open Access
- 16 January 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (3) , 034101
Tunability of voltage pulse mediated memristive functionality by varying doping concentration in SrTiO3
The potential applications of memristive devices extend far beyond what can be realized using digital computing with utilization prospects in data encryption and in mobile communication. This necessitates widening the scope of memristive attributes to include the intrinsic variability of the resistive states between cycles for security applications. We demonstrate the ability to controllably influence resistive switching in Nb-doped SrTiO3-based interface memristors of different doping concentrations. We find that the reset switch from low to high analog resistance states is faster than for the reverse process and the switching speed increases with doping. Memristive functionalities, such as resistance window, stochasticity, and nonlinearity, are similarly influenced with doping. We demonstrate that a train of pulses applied in different sequences can encode information, exhibited as distinguishable resistance states, and read by applying a small voltage signal. We attribute these findings to the increased interfacial electric field at higher doping concentrations. The doping concentration is a useful handle to tune the memristive functionality for a wide range of different utilizations, beyond those prevalent today.
- 16 January 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (3) , 034101
Open AccessTunability of voltage pulse mediated memristive functionality by varying doping concentration in SrTiO3
The potential applications of memristive devices extend far beyond what can be realized using digital computing with utilization prospects in data encryption and in mobile communication. This necessitates widening the scope of memristive attributes to include the intrinsic variability of the resistive states between cycles for security applications. We demonstrate the ability to controllably influence resistive switching in Nb-doped SrTiO3-based interface memristors of different doping concentrations. We find that the reset switch from low to high analog resistance states is faster than for the reverse process and the switching speed increases with doping. Memristive functionalities, such as resistance window, stochasticity, and nonlinearity, are similarly influenced with doping. We demonstrate that a train of pulses applied in different sequences can encode information, exhibited as distinguishable resistance states, and read by applying a small voltage signal. We attribute these findings to the increased interfacial electric field at higher doping concentrations. The doping concentration is a useful handle to tune the memristive functionality for a wide range of different utilizations, beyond those prevalent today.
- Open Access
Memristive Memory Enhancement by Device Miniaturization for Neuromorphic Computing
The areal footprint of memristors is a key consideration in material-based neuromorophic computing and large-scale architecture integration. Electronic transport in the most widely investigated memristive devices is mediated by filaments, posing a challenge to their scalability in architecture implementation. Here we present a compelling alternative memristive device and demonstrate that areal downscaling leads to enhancement in memristive memory window, while maintaining analogue behavior, contrary to expectations. Our device designs directly integrated on semiconducting Nb-SrTiO$_3$ allows leveraging electric field effects at edges, increasing the dynamic range in smaller devices. Our findings are substantiated by studying the microscopic nature of switching using scanning transmission electron microscopy, in different resistive states, revealing an interfacial layer whose physical extent is influenced by applied electric fields. The ability of Nb-SrTiO$_3$ memristors to satisfy hardware and software requirements with downscaling, while significantly enhancing memristive functionalities, makes them strong contenders for non-von Neumann computing, beyond CMOS.
Open AccessMemristive Memory Enhancement by Device Miniaturization for Neuromorphic Computing
The areal footprint of memristors is a key consideration in material-based neuromorophic computing and large-scale architecture integration. Electronic transport in the most widely investigated memristive devices is mediated by filaments, posing a challenge to their scalability in architecture implementation. Here we present a compelling alternative memristive device and demonstrate that areal downscaling leads to enhancement in memristive memory window, while maintaining analogue behavior, contrary to expectations. Our device designs directly integrated on semiconducting Nb-SrTiO$_3$ allows leveraging electric field effects at edges, increasing the dynamic range in smaller devices. Our findings are substantiated by studying the microscopic nature of switching using scanning transmission electron microscopy, in different resistive states, revealing an interfacial layer whose physical extent is influenced by applied electric fields. The ability of Nb-SrTiO$_3$ memristors to satisfy hardware and software requirements with downscaling, while significantly enhancing memristive functionalities, makes them strong contenders for non-von Neumann computing, beyond CMOS.
- Open Access
- 1 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 89-99
TCAmMCogniGron: Energy Efficient Memristor-Based TCAM for Match-Action Processing
The Internet relies heavily on programmable match-action processors for matching network packets against locally available network rules and taking actions, such as forwarding and modification of network packets. This match-action process must be performed at high speed, i.e., commonly within one clock cycle, using a specialized memory unit called Ternary Content Addressable Memory (TCAM). Building on transistor-based CMOS designs, state-of-the-art TCAM architectures have high energy consumption and lack resilient designs for incorporating novel technologies for performing appropriate actions. In this article, we motivate the use of a novel fundamental component, the ‘Memristor’, for the development of TCAM architecture for match-action processing. Memristors can provide energy efficiency, non-volatility and better resource density as compared to transistors. We have proposed a novel memristor-based TCAM architecture called TCAmM CogniGron , built upon the voltage divider principle and requiring only two memristors and five transistors for storage and search operations compared to sixteen transistors in the traditional TCAM architecture. We analyzed its performance over an experimental data set of Nb-doped SrTiO 3 -based memristor. The analysis of TCAmM CogniGron showed promising power consumption statistics of 16 µW and 1 µW for match and mismatch operations along with twice the improvement in resources density as compared to the traditional architectures.
- 1 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 89-99
Open AccessTCAmMCogniGron: Energy Efficient Memristor-Based TCAM for Match-Action Processing
The Internet relies heavily on programmable match-action processors for matching network packets against locally available network rules and taking actions, such as forwarding and modification of network packets. This match-action process must be performed at high speed, i.e., commonly within one clock cycle, using a specialized memory unit called Ternary Content Addressable Memory (TCAM). Building on transistor-based CMOS designs, state-of-the-art TCAM architectures have high energy consumption and lack resilient designs for incorporating novel technologies for performing appropriate actions. In this article, we motivate the use of a novel fundamental component, the ‘Memristor’, for the development of TCAM architecture for match-action processing. Memristors can provide energy efficiency, non-volatility and better resource density as compared to transistors. We have proposed a novel memristor-based TCAM architecture called TCAmM CogniGron , built upon the voltage divider principle and requiring only two memristors and five transistors for storage and search operations compared to sixteen transistors in the traditional TCAM architecture. We analyzed its performance over an experimental data set of Nb-doped SrTiO 3 -based memristor. The analysis of TCAmM CogniGron showed promising power consumption statistics of 16 µW and 1 µW for match and mismatch operations along with twice the improvement in resources density as compared to the traditional architectures.
- Open Access
- 18 May 2021
- Published by Frontiers Media SA in Frontiers in Nanotechnology
- Vol. 3
Anisotropy and Current Control of Magnetization in SrRuO3/SrTiO3 Heterostructures for Spin-Memristors
Spintronics-based nonvolatile components in neuromorphic circuits offer the possibility of realizing novel functionalities at low power. Current-controlled electrical switching of magnetization is actively researched in this context. Complex oxide heterostructures with perpendicular magnetic anisotropy (PMA), consisting of SrRuO3 (SRO) grown on SrTiO3 (STO) are strong material contenders. Utilizing the crystal orientation, magnetic anisotropy in such simple heterostructures can be tuned to either exhibit a perfect or slightly tilted PMA. Here, we investigate current induced magnetization modulation in such tailored ferromagnetic layers with a material with strong spin-orbit coupling (Pt), exploiting the spin Hall effect. We find significant differences in the magnetic anisotropy between the SRO/STO heterostructures, as manifested in the first and second harmonic magnetoresistance measurements. Current-induced magnetization switching can be realized with spin-orbit torques, but for systems with perfect PMA this switching is probabilistic as a result of the high symmetry. Slight tilting of the PMA can break this symmetry and allow the realization of deterministic switching. Control over the magnetic anisotropy of our heterostructures therefore provides control over the manner of switching. Based on our findings, we propose a three-terminal spintronic memristor, with a magnetic tunnel junction design, that shows several resistive states controlled by electric charge. Non-volatile states can be written through SOT by applying an in-plane current, and read out as a tunnel current by applying a small out-of-plane current. Depending on the anisotropy of the SRO layer, the writing mechanism is either deterministic or probabilistic allowing for different functionalities to emerge. We envisage that the probabilistic MTJs could be used as synapses while the deterministic devices can emulate neurons.
- 18 May 2021
- Published by Frontiers Media SA in Frontiers in Nanotechnology
- Vol. 3
Open AccessAnisotropy and Current Control of Magnetization in SrRuO3/SrTiO3 Heterostructures for Spin-Memristors
Spintronics-based nonvolatile components in neuromorphic circuits offer the possibility of realizing novel functionalities at low power. Current-controlled electrical switching of magnetization is actively researched in this context. Complex oxide heterostructures with perpendicular magnetic anisotropy (PMA), consisting of SrRuO3 (SRO) grown on SrTiO3 (STO) are strong material contenders. Utilizing the crystal orientation, magnetic anisotropy in such simple heterostructures can be tuned to either exhibit a perfect or slightly tilted PMA. Here, we investigate current induced magnetization modulation in such tailored ferromagnetic layers with a material with strong spin-orbit coupling (Pt), exploiting the spin Hall effect. We find significant differences in the magnetic anisotropy between the SRO/STO heterostructures, as manifested in the first and second harmonic magnetoresistance measurements. Current-induced magnetization switching can be realized with spin-orbit torques, but for systems with perfect PMA this switching is probabilistic as a result of the high symmetry. Slight tilting of the PMA can break this symmetry and allow the realization of deterministic switching. Control over the magnetic anisotropy of our heterostructures therefore provides control over the manner of switching. Based on our findings, we propose a three-terminal spintronic memristor, with a magnetic tunnel junction design, that shows several resistive states controlled by electric charge. Non-volatile states can be written through SOT by applying an in-plane current, and read out as a tunnel current by applying a small out-of-plane current. Depending on the anisotropy of the SRO layer, the writing mechanism is either deterministic or probabilistic allowing for different functionalities to emerge. We envisage that the probabilistic MTJs could be used as synapses while the deterministic devices can emulate neurons.
- Open Access
Learning to Approximate Functions Using Nb-doped SrTiO$_3$ Memristors
Memristors have attracted interest as neuromorphic computation elements because they show promise in enabling efficient hardware implementations of artificial neurons and synapses. We performed measurements on interface-type memristors to validate their use in neuromorphic hardware. Specifically, we utilised Nb-doped SrTiO$_3$ memristors as synapses in a simulated neural network by arranging them into differential synaptic pairs, with the weight of the connection given by the difference in normalised conductance values between the two paired memristors. This network learned to represent functions through a training process based on a novel supervised learning algorithm, during which discrete voltage pulses were applied to one of the two memristors in each pair. To simulate the fact that both the initial state of the physical memristive devices and the impact of each voltage pulse are unknown we injected noise at each timestep. Nevertheless, discrete updates based on local knowledge were shown to result in robust learning performance. Using this class of memristive devices as the synaptic weight element in a spiking neural network yields, to our knowledge, one of the first models of this kind, capable of learning to be a universal function approximator, and strongly suggests the suitability of these memristors for usage in future computing platforms.
Open AccessLearning to Approximate Functions Using Nb-doped SrTiO$_3$ Memristors
Memristors have attracted interest as neuromorphic computation elements because they show promise in enabling efficient hardware implementations of artificial neurons and synapses. We performed measurements on interface-type memristors to validate their use in neuromorphic hardware. Specifically, we utilised Nb-doped SrTiO$_3$ memristors as synapses in a simulated neural network by arranging them into differential synaptic pairs, with the weight of the connection given by the difference in normalised conductance values between the two paired memristors. This network learned to represent functions through a training process based on a novel supervised learning algorithm, during which discrete voltage pulses were applied to one of the two memristors in each pair. To simulate the fact that both the initial state of the physical memristive devices and the impact of each voltage pulse are unknown we injected noise at each timestep. Nevertheless, discrete updates based on local knowledge were shown to result in robust learning performance. Using this class of memristive devices as the synaptic weight element in a spiking neural network yields, to our knowledge, one of the first models of this kind, capable of learning to be a universal function approximator, and strongly suggests the suitability of these memristors for usage in future computing platforms.
- 25 September 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 124 (15) , 152102
Electric field driven memristive behavior at the Schottky interface of Nb-doped SrTiO3
Computing inspired by the human brain requires a massive parallel architecture of low-power consuming elements of which the internal state can be changed. SrTiO3 is a complex oxide that offers rich electronic properties; here, Schottky contacts on Nb-doped SrTiO3 are demonstrated as memristive elements for neuromorphic computing. The electric field at the Schottky interface alters the conductivity of these devices in an analog fashion, which is important for mimicking synaptic plasticity. Promising power consumption and endurance characteristics are observed. The resistance states are shown to emulate the forgetting process of the brain. A charge trapping model is proposed to explain the switching behavior.
- 25 September 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 124 (15) , 152102
Electric field driven memristive behavior at the Schottky interface of Nb-doped SrTiO3
Computing inspired by the human brain requires a massive parallel architecture of low-power consuming elements of which the internal state can be changed. SrTiO3 is a complex oxide that offers rich electronic properties; here, Schottky contacts on Nb-doped SrTiO3 are demonstrated as memristive elements for neuromorphic computing. The electric field at the Schottky interface alters the conductivity of these devices in an analog fashion, which is important for mimicking synaptic plasticity. Promising power consumption and endurance characteristics are observed. The resistance states are shown to emulate the forgetting process of the brain. A charge trapping model is proposed to explain the switching behavior.
- 20 September 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10732, 107323B
Electric field modulation of tunneling anisotropic magnetoresistance across the Schottky interface of Ni/Nb-doped SrTiO3 at room temperature
An electric field modulation of tunneling anisotropic magnetoresistance (TAMR) is reported at the Schottky interface of Ni and Nb-doped SrTiO3 at room temperature. TAMR response as high as 0.11% is observed in the bias dependence. A bias is applied across the Schottky junction whose variation also modulates the built-in electric field across the interface. This is simulated from the electrostatic modelling across the Schottky interface. Strength of the TAMR response and its modulation with electric field is strongly dependent on the large dielectric permittivity of SrTiO3 at room temperature and on the modulation of the Rashba spin-orbit field across the Schottky interface respectively. This experiment, shows an unique method to store and manipulate spin states by an electric field across the Schottky interface.
- 20 September 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10732, 107323B
Electric field modulation of tunneling anisotropic magnetoresistance across the Schottky interface of Ni/Nb-doped SrTiO3 at room temperature
An electric field modulation of tunneling anisotropic magnetoresistance (TAMR) is reported at the Schottky interface of Ni and Nb-doped SrTiO3 at room temperature. TAMR response as high as 0.11% is observed in the bias dependence. A bias is applied across the Schottky junction whose variation also modulates the built-in electric field across the interface. This is simulated from the electrostatic modelling across the Schottky interface. Strength of the TAMR response and its modulation with electric field is strongly dependent on the large dielectric permittivity of SrTiO3 at room temperature and on the modulation of the Rashba spin-orbit field across the Schottky interface respectively. This experiment, shows an unique method to store and manipulate spin states by an electric field across the Schottky interface.