MNMilan Navratil

Milan Navratil

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Milan Navratil has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Photoluminescence of epoxy resin: explanation of the increase in the flux of photoluminescent radiation during the initial stage of the curing process

    by Michaela Mikuličová, Milan Navrátil, Vojtěch Křesálek

    When using luminescence spectroscopy to study the curing of epoxy resins, there is an increase in the luminescent radiant flux at the beginning of the curing process. The paper clarifies this phenomenon, which limits the determination of the fundamental kinetic constants of the chemical crosslinking reaction. The reflectance measurement shows that the mentioned phenomenon is of physical origin and is caused by a change in the refractive index of the mixture after the addition of the hardener. This change in refractive index is significant in the context of luminescence spectroscopy as it affects the observed luminescent radiant flux. There is a decrease in the refractive index and, therefore, a decrease in reflectance at the material-atmosphere interface, which causes an increase in the number of photons that leave the material. This assumption was further confirmed by measuring the refractive index for the given wavelengths and by the calculation. The paper provides a method of estimating the time constant of the physical process of increase in the flux of photoluminescent radiation. Therefore, it is possible to determine when this process ends, which is crucial for the subsequent estimation of the kinetic parameters of the chemical curing.


  • Open Access

    Influence of the β− Radiation/Cold Atmospheric-Pressure Plasma Surface Modification on the Adhesive Bonding of Polyolefins

    by Martin Bednarik, Ales Mizera, Miroslav Manas, Milan Navratil, Jakub Huba, Eva Achbergerova, Pavel Stoklasek

    The goal of this research was to examine the effect of two surface modification methods, i.e., radiation cross-linking and plasma treatment, on the adhesive properties and the final quality of adhesive bonds of polypropylene (PP), which was chosen as the representative of the polyolefin group. Polymer cross-linking was induced by beta (accelerated electrons—β−) radiation in the following dosages: 33, 66, and 99 kGy. In order to determine the usability of β− radiation for these applications (improving the adhesive properties and adhesiveness of surface layers), the obtained results were compared with values measured on surfaces treated by cold atmospheric-pressure plasma with outputs 2.4, 4, and 8 W. The effects of both methods were compared by several parameters, namely wetting contact angles, free surface energy, and overall strength of adhesive bonds. Furthermore, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) were conducted. According to our findings the following conclusion was reached; both tested surface modification methods significantly altered the properties of the specimen’s surface layer, which led to improved wetting, free surface energy, and bond adhesion. Following the β− radiation, the free surface energy of PP rose by 80%, while the strength of the bond grew in some cases by 290% in comparison with the non-treated surface. These results show that when compared with cold plasma treatment the beta radiation appears to be an effective tool capable of improving the adhesive properties and adhesiveness of PP surface layers.


  • Open Access

    The Electrical, Mechanical and Surface Properties of Thermoplastic Polyester Elastomer Modified by Electron Beta Radiation

    by David Manas, Ales Mizera, Milan Navratil, Miroslav Manas, Martin Ovsik, Stanislav Sehnalek, Pavel Stoklasek

    The main advantages of Thermoplastic Polyester Elastomers (TPE-E) are their elastomer properties as well as their ability to be processed in the same way as thermoplastic polymers (e.g., injection moulding, compression moulding and extrusion). However, TPE-Es’ properties, mainly their mechanical properties and thermal characteristics, are not as good as those of elastomers. Because of this TPE-Es are often modified with the aim of improving their properties and extending their range of application. Radiation cross-linking using accelerated electron beams is one of the most effective ways to change virgin polymers’ properties significantly. Their electrical (that is to say permittivity and resistivity measurements), mechanical (that is, tensile and impact tensile tests), as well as surface (that is, nano-indentation) properties were measured on modified/cross-linked TPE-E specimens with and/or without a cross-linking agent at irradiation doses of 0, 33, 66, 99, 132, 165 and 198 kGy. The data acquired from these procedures show significant changes in the measured properties. The results of this study allow the possibility of determining the proper processing parameters and irradiation doses for the production of TPE-E products which leads to the enlargement of their application in practice.


  • Open Access

    Advanced microscopic techniques used for integrated circuits authenticity analysis

    by M Navrátil, P Neumann, V Křesálek

    Many electronic systems used in industry or other special areas are put at risk by counterfeit electronic components occurrence, especially by semiconductors. These counterfeit components represent a serious threat for systems functionality and reliability. We can take as a fraudulent or as a suspicious component any component of unknown origin, which we can find any difference in contrast to the original manufacturer component of the same model. This article describes advanced microscopic techniques used in problems with counterfeit integrated circuits. Their genuineness evaluation ability is discussed and illustrated with several microscopic images.