Tao Jiang

Surface soil moisture (SSM) is a critical land surface parameter affecting a wide variety of economically and environmentally important processes. Spaceborne microwave remote sensing has been extensively employed for monitoring SSM. Active microwave sensors offering high spatial resolution are typically utilized to capture dynamic fluctuations in soil moisture, albeit with low temporal resolution, whereas passive sensors are typically used to monitor the absolute values of large-scale soil moisture, but offer coarser spatial resolutions (~10 km). In this study, a passive microwave observation system using an X-band microwave radiometer mounted on a drone was established to obtain high-resolution (~1 m) radiative brightness temperature within the observation region. The region was a control experimental field established to validate the proposed approach. Additionally, machine learning models were employed to invert the soil moisture. Based on the site-based validation the trained inversion model performed well, with estimation accuracies of 0.74 and 2.47% in terms of the coefficient of determination and the root mean square error, respectively. This study introduces a methodology for generating high-spatial resolution and high-accuracy soil moisture maps in the context of precision agriculture at the field scale.

A digital automatic gain compensation (AGC) drone-borne K-band microwave radiometer with continuous high-speed acquisition and fast storage functions is designed and applied to obtain high-resolution radiation brightness temperature (TB) images. In this paper, the composition of the drone-borne passive microwave observation system is introduced, a data processing method considering the topography and angle correction is proposed, the error analysis of the projection process is carried out, and finally, a high-resolution microwave radiation TB image is obtained by a demonstration area experiment. The characteristics of the radiometer are tested by experiments, and the standard deviation of the TB is 1K. The data processing method proposed is verified using a demonstration case. The corrected data have a good correlation with the theoretical values, of which the R² is 0.87. A high-resolution radiation TB image is obtained, and the results show the TB characteristics of different objects well. The boundary of the ground object is closer to the real value after correction.

Considering the tradeoff between spatial resolution and temporal resolution, spatiotemporal fusion has become a promising technique to monitor snow cover dynamics with both high spatial and temporal resolutions. The representative spatiotemporal fusion methods, e.g. Spatial Temporal Data Fusion Approach (STDFA), usually exist obvious phenomenon of spectral distortion when the surface reflectance changes nonlinearly, which affects the quality of the spatiotemporal fusion image. To address this issue, an effective STDFA-Matching-Pix2pix-Generative Adversarial Network (SMPG) algorithm combining the unmixing-based method, deep learning method, pre-matching and post-matching module is proposed to reduce the spectral distortion of STDFA fusion image. The high-temporal-low-spatial (HTLS) resolution MOD09GA data and high-spatial-low-temporal resolution (HSLT) Landsat 8 data are selected in this study. SMPG algorithm is firstly employed to obtain daily high-spatial-high-temporal (HSHT) images, and then daily snow cover results with a spatial resolution of 30 m are obtained by calculating the normalized difference snow index (NDSI). SMPG algorithm is further compared with STDFA, Spatial and Temporal Adaptive Reflectance Fusion Model (STARFM), Flexible Spatiotemporal DAta Fusion (FSDAF), Swin SpatioTemporal Fusion Model (SwinSTFM), and Generative Adversarial Network-based SpatioTemporal Fusion Model (GAN-STFM). The experimental results indicate that the proposed algorithm yields better overall performance in daily spatiotemporal fusion image and snow cover result with a spatial resolution of 30 m. The mean correlation coefficient (CC) of SMPG can achieve 0.962, which is 0.06-0.36 higher than that of other spatiotemporal fusion methods. The error between the percentage of snow cover area obtained through SMPG and validation data is within 0.84%.

Satellite passive microwave remote sensing has been extensively used to estimate snow depth (SD) and snow water equivalent (SWE) across both regional and continental scales. However, the presence of forests causes significant uncertainties in the estimations of snow parameters. Forest transmissivity is one of the most important parameters for describing the microwave radiation and scattering characteristics of forest canopies. Although many researchers have constructed models for the functional relationship between forest transmissivity and forest vegetation parameters (e.g., stand growth and accumulation), such relationships are strongly limited by the inversion accuracy of vegetation parameters, forest distribution types, and scale-transformation effects in terms of regional or global scale applications. In this research, we propose a pixel-wise forest transmissivity estimation model (Pixel-wise γ Model) based on long-term series satellite brightness temperature (TB) data for the satellite remote sensing inversion of snow parameters. The model performance is evaluated and applied in SD inversion. The results show that the SD inversion errors RMSE and Bias are 9.8 cm and −1.5 cm, respectively; the SD inversion results are improved by 41% and 84% after using the Pixel-wise γ Model, compared with the forest transmissivity model applied in the GlobSnow v3.0 product. The proposed forest transmissivity model does not depend on forest cover parameters and other ground measurement parameters, which greatly improves its application scope and simplicity.

Chlorophyll-a (Chl-a) is an important characterized parameter of lakes. Monitoring it accurately through remote sensing is thus of great significance for early warnings of water eutrophication. Sentinel Multispectral Imager (MSI) images from May to September between 2020 and 2021 were used along with in-situ measurements to estimate Chl-a in Lake Chagan, which is located in Jilin Province, Northeast China. In this study, the extreme gradient boosting (XGBoost) and Random Forest (RF) models, which had similar performances, were generated by six single bands and six band combinations. The RF model was then selected based on the assessments (R² = 0.79, RMSE = 2.51 μg L⁻¹, MAPE = 9.86%), since its learning of the input features in the model conformed to the bio-optical properties of Case 2 waters. The study considered Chl-a concentrations in Lake Chagan as a seasonal pattern according to the K-Nearest-Neighbors (KNN) classification. The RF model also showed relatively stable performance for three seasons (spring, summer and autumn) and it was applied to map Chl-a in the whole lake. The research presents a more reliable machine learning (ML) model with higher precision than previous empirical models, as shown by the effects of the input features linked with the biological mechanisms of Chl-a. Its robustness was revealed by the temporal and spatial distributions of Chl-a concentrations, which were consistent with in-situ measurements in the map. This research was capable of revealing the current ecological situation in Lake Chagan and can serve as a reference in remote sensing of inland lakes.

Snow cover plays a highly critical role in the global water cycle and energy exchange. Accurate snow depth (SD) data are important for research on hydrologic processes, climate change, and natural disaster prediction. However, existing passive microwave (PMW) SD products have high uncertainty in Northeast China owing to their coarse spatial resolution. Surface environment parameters should also be considered to reduce errors in existing SD products. Otherwise, it is difficult to accurately capture snow spatiotemporal variations, especially in a complex environment (e.g., mountain or forests areas). To improve the inversion accuracy and spatial resolution of existing SD products in Northeast China, a multifactor SD downscaling model was developed by combining PMW SD data from the AMSR2 sensor, optical snow cover extent data, and surface environmental parameters to produce fine scale (500 m × 500 m) and high precision SD data. Validations at 98 ground meteorological stations show that the developed model greatly improved the spatial resolution and inversion accuracy of the raw AMSR2 SD product; its root-mean-square error (RMSE) reduced from 26.15 cm of the raw product to 7.58 cm, and the correlation coefficient (R) increased from 0.39 to 0.53. For other SD products (WESTDC and FY), the multifactor SD downscaling model still has good applicability, it could further improve the performance of the WESTDC and FY SD products in time and space and achieve better inversion accuracy than raw SD products. Furthermore, the proposed model exhibited good agreement with the observed SD data in a field quadrat (3 km × 2 km) within the fine scale, with an error ranging between −2 and 2 cm. Compared with the existing downscaling methods, the proposed model presented the best performance.

A drone-borne microwave radiometer requires a high sampling frequency and a continuous acquisition capability to detect and mitigate radio frequency interference (RFI), but existing methods cannot store such a large amount of data. In this paper, the dual polling write method (DPSM) for secure digital cards triggered by a timer under a multitask framework based on STM32 MCU is proposed to meet the requirements of continuous data storage. The card programming step was changed from a query waiting structure to a polling query flag bit structure, and time-sharing processing and parallel processing were used to simulate multithreading. The experimental results were as follows: (1) the time consumption of the whole storage procedure was reduced from 4000 microseconds to 200–400 microseconds; (2) the time consumption of the card programming step was reduced from 3000 microseconds in the first block and 1000 microseconds in the second and subsequent blocks to 17–174 microseconds and 18–71 microseconds, respectively, compared with the existing method; (3) the delay in the whole sampling cycle was reduced from 3942 microseconds to 0 microseconds. The results of this paper can meet the data storage requirements of a drone-borne microwave radiometer and be applied to the high-speed storage of other devices.

Wide mode SAR images have an apparent incidence angle effect. The existing incident angle normalization methods assume that the relationship between the incident angle (θ) and the backscattering coefficient (σ_PQ) does not change with the growth stage of crops, which is in conflict with the real-life situation. Therefore, the normalization results of σ_PQ based on these existing methods will affect the accuracy of object classification, target recognition, and land surface parameter inversion. Here, the change in θ-σ_PQ relationship was investigated based on time-series (April to October) σ_PQ of maize canopies in northeast China, and a dynamic method based on normalized difference vegetation index (NDVI) was developed to normalize the effect of θ on σ_PQ. Through the accuracy evaluation, the following conclusions are obtained: (1) the dependence (referring to N) of Sentinel 1 C-band σ_PQ on θ varies with maize NDVI. In addition, the value of N changed from 9.35 to 0.66 at VV polarization from bare soil to biomass peak, and from 6.26 to 0.99 at VH polarization; (2) a dynamic method was proposed to quantify the change of N based on its strong correlation with NDVI, indicated by R² of 0.82 and 0.80 for VV and VH polarization, respectively; and (3) the overall root mean square error of normalized σ_PQ based on the newly-developed dynamic method is 0.51 dB, and this accuracy outperforms the original first-order cosine method (1.37 dB) and cosine square law method (1.08 dB) by about 63% and 53% on the whole. This study provides a dynamic framework for normalizing radar backscatter coefficient, improving the retrieval accuracy of land surface parameters from radar remote sensing.

The dehydration cracking of saline soil is a kind of common natural phenomenon, and the cracks of saline soil will affect the satellite spectrum, and then affect the accuracy of satellite spectral inversion of electrical conductivity (EC). This study introduces the concept of crack rate (CR) to describe the crack information of saline soil, and quantifies the influence of saline soil crack on the EC of satellite spectral inversion. In 2014 and 2020, the satellite-ground synchronous observation experiments of soda-type inland saline soil and coastal chlorinated-type saline soil were carried out, and the CR of surface cracked saline soil was extracted by an image processing algorithm. For the saline soil spectrum data, the correlation analysis method is used to establish the best band combination that characterizes the relationship between the different saline soil spectrum data and salinity, and the EC inversion model is established using the BP neural network method. The results show that: after the CR is introduced, the determination coefficient (R²) for the EC of soda-type saline soil satellite spectral inversion increased from 0.59 to 0.67, with an increase of 14.42%, and the mean square error (MSE) reduced from 0.20 to 0.16, with a decrease of 19.49%. The R² for the EC of coastal chlorinated-type saline soil satellite spectral inversion increased from 0.64 to 0.75, an increase of 17.73%, and the MSE decreased from 0.16 to 0.12, a decrease of 25.15%. The study proved the influence of the cracks in the saline soil on the satellite spectrum and provided a new way to improve the accuracy of the satellite spectrum inversion of the EC of the cracked saline soil.

Although efforts and progress have been made in crop classification using optical remote sensing images, it is still necessary to make full use of the high spatial, temporal, and spectral resolutions of remote sensing images. However, with the increasing volume of remote sensing data, a key emerging issue in the field of crop classification is how to find useful information from massive data to balance classification accuracy and processing time. To address this challenge, we developed a novel crop classification method, combining optimal feature selection (OFSM) with hybrid convolutional neural network-random forest (CNN-RF) networks for multi-temporal optical remote sensing images. This research used 234 features including spectral, segmentation, color, and texture features from three scenes of Sentinel-2 images to identify crop types in the Jilin province of northeast China. To effectively extract the effective features of remote sensing data with lower time requirements, the use of OFSM was proposed with the results compared with two traditional feature selection methods (TFSM): random forest feature importance selection (RF-FI) and random forest recursive feature elimination (RF-RFE). Although the time required for OFSM was 26.05 s, which was between RF-FI with 1.97 s and RF-RFE with 132.54 s, OFSM outperformed RF-FI and RF-RFE in terms of the overall accuracy (OA) of crop classification by 4% and 0.3%, respectively. On the basis of obtaining effective feature information, to further improve the accuracy of crop classification we designed two hybrid CNN-RF networks to leverage the advantages of one-dimensional convolution (Conv1D) and Visual Geometry Group (VGG) with random forest (RF), respectively. Based on the selected optimal features using OFSM, four networks were tested for comparison: Conv1D-RF, VGG-RF, Conv1D, and VGG. Conv1D-RF achieved the highest OA at 94.27% as compared with VGG-RF (93.23%), Conv1D (92.59%), and VGG (91.89%), indicating that the Conv1D-RF method with optimal feature input provides an effective and efficient method of time series representation for multi-temporal crop-type classification.