Hamid Reza Ghafarian Malamiri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Hamid Reza Ghafarian Malamiri has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Iman Rousta
Department of Geography, Yazd University, Yazd 8915818411, Iran
7 shared publications - Carla Sofia Santos Ferreira
Polytechnic Institute of Coimbra
6 shared publications - Fahime Arabi Aliabad
Department of Arid Lands Management, Faculty of Natural Resources and Desert Studies, Yazd University, Yazd, Iran
5 shared publications - Hadi Zare Khormizi
College of Natural resources and Desert, Yazd University, Yazd 8915818411, Iran
5 shared publications - Haraldur Olafsson
Institute for Atmospheric Sciences, Weather and Climate and Department of Physics, University of Iceland and Icelandic Meteorological Office (IMO), Bustadavegur 7, IS-108 Reykjavik, Iceland
5 shared publications - Hao Zhang
Department of Environmental Science and Engineering, Jiangwan Campus, Fudan University, 2005 Songhu Road, Yangpu District, Shanghai 200438, China
4 shared publications
Latest Publications
- Open Access
- 15 October 2025
- Published by Elsevier in Global Environmental Change Advances
- Vol. 5
Temporal Dynamics of Crop Health in Maize Cultivars: Insights for Drone-Based Data Interpretation
- 15 October 2025
- Published by Elsevier in Global Environmental Change Advances
- Vol. 5
Open AccessTemporal Dynamics of Crop Health in Maize Cultivars: Insights for Drone-Based Data Interpretation
- Open Access
- 14 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 8729-8746
Adaptive Gap-Filling of Multispectral Images at Coarse and Fine Spatial Resolution
Optical fine and coarse spatial resolution multi-spectral images are essential for monitoring land surface processes but are often affected by gaps due to cloud contamination and other factors. Gap-filling methods are vital for overcoming these issues, yet existing approaches struggle to accurately reconstruct pixels impacted by undetected thin clouds and shadows, particularly in fine spatial resolution images. This study introduces a comprehensive gap-filling method that identifies and reconstructs invalid pixels in both fine and coarse spatial resolution images. The method combines different spatial and temporal gap-filling methods. The specific combination of methods is orchestrated to adapt to each image, mainly on the basis of the fractional abundance and spatial pattern of cloud cover. To evaluate the performance, experiments were conducted using MODIS (coarse-resolution) and Landsat/OLI (fine-resolution) images with artificial gaps (10%-90%) introduced at varying positions in cloud-free reference images. For coarse-resolution images, the blue band showed the lowest Root Mean Square Error (RMSE) of 0.004 to 0.03, while the NIR band had higher RMSE (0.01-0.05). The Structural Similarity Index Measure (SSIM) ranged from 0.96 to 0.73 as gap percentages increased. For fine-resolution images, random gaps were reconstructed most effectively, with RMSE values for the blue band between 0.005 and 0.01, and NIR errors ranging from 0.01 to 0.05. SSIM values ranged from 0.90 to 0.83 (blue) and 0.86 to 0.71 (NIR), confirming the method reliability for time-series analysis and data fusion applications.
- 14 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 8729-8746
Open AccessAdaptive Gap-Filling of Multispectral Images at Coarse and Fine Spatial Resolution
Optical fine and coarse spatial resolution multi-spectral images are essential for monitoring land surface processes but are often affected by gaps due to cloud contamination and other factors. Gap-filling methods are vital for overcoming these issues, yet existing approaches struggle to accurately reconstruct pixels impacted by undetected thin clouds and shadows, particularly in fine spatial resolution images. This study introduces a comprehensive gap-filling method that identifies and reconstructs invalid pixels in both fine and coarse spatial resolution images. The method combines different spatial and temporal gap-filling methods. The specific combination of methods is orchestrated to adapt to each image, mainly on the basis of the fractional abundance and spatial pattern of cloud cover. To evaluate the performance, experiments were conducted using MODIS (coarse-resolution) and Landsat/OLI (fine-resolution) images with artificial gaps (10%-90%) introduced at varying positions in cloud-free reference images. For coarse-resolution images, the blue band showed the lowest Root Mean Square Error (RMSE) of 0.004 to 0.03, while the NIR band had higher RMSE (0.01-0.05). The Structural Similarity Index Measure (SSIM) ranged from 0.96 to 0.73 as gap percentages increased. For fine-resolution images, random gaps were reconstructed most effectively, with RMSE values for the blue band between 0.005 and 0.01, and NIR errors ranging from 0.01 to 0.05. SSIM values ranged from 0.90 to 0.83 (blue) and 0.86 to 0.71 (NIR), confirming the method reliability for time-series analysis and data fusion applications.
- Open Access
- 6 September 2024
- Published by MDPI AG in Horticulturae
- Vol. 10 (9) , 951
Sustainable Water Management in Horticulture: Problems, Premises, and Promises
Water is crucial for enduring horticultural productivity, but high water-use requirements and declining water supplies with the changing climate challenge economic viability, environmental sustainability, and social justice. While the scholarly literature pertaining to water management in horticulture abounds, knowledge of practices and technologies that optimize water use is scarce. Here, we review the scientific literature relating to water requirements for horticulture crops, impacts on water resources, and opportunities for improving water- and transpiration-use efficiency. We find that water requirements of horticultural crops vary widely, depending on crop type, development stage, and agroecological region, but investigations hitherto have primarily been superficial. Expansion of the horticulture sector has depleted and polluted water resources via overextraction and agrochemical contamination, but the extent and significance of such issues are not well quantified. We contend that innovative management practices and irrigation technologies can improve tactical water management and mitigate environmental impacts. Nature-based solutions in horticulture—mulching, organic amendments, hydrogels, and the like—alleviate irrigation needs, but information relating to their effectiveness across production systems and agroecological regions is limited. Novel and recycled water sources (e.g., treated wastewater, desalination) would seem promising avenues for reducing dependence on natural water resources, but such sources have detrimental environmental and human health trade-offs if not well managed. Irrigation practices including partial root-zone drying and regulated deficit irrigation evoke remarkable improvements in water use efficiency, but require significant experience for efficient implementation. More advanced applications, including IoT and AI (e.g., sensors, big data, data analytics, digital twins), have demonstrable potential in supporting smart irrigation (focused on scheduling) and precision irrigation (improving spatial distribution). While adoption of technologies and practices that improve sustainability is increasing, their application within the horticultural industry as a whole remains in its infancy. Further research, development, and extension is called for to enable successful adaptation to climate change, sustainably intensify food security, and align with other Sustainable Development Goals.
- 6 September 2024
- Published by MDPI AG in Horticulturae
- Vol. 10 (9) , 951
Open AccessSustainable Water Management in Horticulture: Problems, Premises, and Promises
Water is crucial for enduring horticultural productivity, but high water-use requirements and declining water supplies with the changing climate challenge economic viability, environmental sustainability, and social justice. While the scholarly literature pertaining to water management in horticulture abounds, knowledge of practices and technologies that optimize water use is scarce. Here, we review the scientific literature relating to water requirements for horticulture crops, impacts on water resources, and opportunities for improving water- and transpiration-use efficiency. We find that water requirements of horticultural crops vary widely, depending on crop type, development stage, and agroecological region, but investigations hitherto have primarily been superficial. Expansion of the horticulture sector has depleted and polluted water resources via overextraction and agrochemical contamination, but the extent and significance of such issues are not well quantified. We contend that innovative management practices and irrigation technologies can improve tactical water management and mitigate environmental impacts. Nature-based solutions in horticulture—mulching, organic amendments, hydrogels, and the like—alleviate irrigation needs, but information relating to their effectiveness across production systems and agroecological regions is limited. Novel and recycled water sources (e.g., treated wastewater, desalination) would seem promising avenues for reducing dependence on natural water resources, but such sources have detrimental environmental and human health trade-offs if not well managed. Irrigation practices including partial root-zone drying and regulated deficit irrigation evoke remarkable improvements in water use efficiency, but require significant experience for efficient implementation. More advanced applications, including IoT and AI (e.g., sensors, big data, data analytics, digital twins), have demonstrable potential in supporting smart irrigation (focused on scheduling) and precision irrigation (improving spatial distribution). While adoption of technologies and practices that improve sustainability is increasing, their application within the horticultural industry as a whole remains in its infancy. Further research, development, and extension is called for to enable successful adaptation to climate change, sustainably intensify food security, and align with other Sustainable Development Goals.
- Open Access
- 16 May 2024
- Published by MDPI AG in Horticulturae
- Vol. 10 (5) , 515
Estimation of Evaporation and Drought Stress of Pistachio Plant Using UAV Multispectral Images and a Surface Energy Balance Approach
Water scarcity is a critical abiotic stress factor for plants in arid and semi-arid regions, impacting crop development and production yield and quality. Monitoring water stress at finer scales (e.g., farm and plant), requires multispectral imagery with thermal capabilities at centimeter resolution. This study investigates drought stress in pistachio trees in a farm located in Yazd province, Iran, by using Unmanned Aerial Vehicle (UAV) images to quantify evapotranspiration and assess drought stress in individual trees. Images were captured on 10 July 2022, using a Matrix 300 UAV with a MicaSense Altum multispectral sensor. By employing the Surface Energy Balance Algorithm for Land (SEBAL), actual field evapotranspiration was accurately calculated (10 cm spatial resolution). Maps of the optimum crop coefficient (Kc) were developed from the Normalized Difference Vegetation Index (NDVI) based on standard evapotranspiration using the Food and Agriculture Organization (FAO) 56 methodology. The comparison between actual and standard evapotranspiration allowed us to identify drought-stressed trees. Results showed an average and maximum daily evaporation of 4.3 and 8.0 mm/day, respectively, in pistachio trees. The real crop coefficient (Kc) for pistachio was 0.66, contrasting with the FAO 56 standard of 1.17 due to the stress factor (Ks). A significant correlation was found between Kc and NDVI (R2 = 0.67, p < 0.01). The regression model produced a crop coefficient map, valuable to support precise irrigation management and drought prevention, considering the heterogeneity at the farm scale.
- 16 May 2024
- Published by MDPI AG in Horticulturae
- Vol. 10 (5) , 515
Open AccessEstimation of Evaporation and Drought Stress of Pistachio Plant Using UAV Multispectral Images and a Surface Energy Balance Approach
Water scarcity is a critical abiotic stress factor for plants in arid and semi-arid regions, impacting crop development and production yield and quality. Monitoring water stress at finer scales (e.g., farm and plant), requires multispectral imagery with thermal capabilities at centimeter resolution. This study investigates drought stress in pistachio trees in a farm located in Yazd province, Iran, by using Unmanned Aerial Vehicle (UAV) images to quantify evapotranspiration and assess drought stress in individual trees. Images were captured on 10 July 2022, using a Matrix 300 UAV with a MicaSense Altum multispectral sensor. By employing the Surface Energy Balance Algorithm for Land (SEBAL), actual field evapotranspiration was accurately calculated (10 cm spatial resolution). Maps of the optimum crop coefficient (Kc) were developed from the Normalized Difference Vegetation Index (NDVI) based on standard evapotranspiration using the Food and Agriculture Organization (FAO) 56 methodology. The comparison between actual and standard evapotranspiration allowed us to identify drought-stressed trees. Results showed an average and maximum daily evaporation of 4.3 and 8.0 mm/day, respectively, in pistachio trees. The real crop coefficient (Kc) for pistachio was 0.66, contrasting with the FAO 56 standard of 1.17 due to the stress factor (Ks). A significant correlation was found between Kc and NDVI (R2 = 0.67, p < 0.01). The regression model produced a crop coefficient map, valuable to support precise irrigation management and drought prevention, considering the heterogeneity at the farm scale.
- Open Access
- 24 January 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (3) , 454
Modeling and Estimating the Land Surface Temperature (LST) Using Remote Sensing and Machine Learning (Case Study: Yazd, Iran)
The pressing issue of global warming is particularly evident in urban areas, where urban thermal islands amplify the warming effect. Understanding land surface temperature (LST) changes is crucial in mitigating and adapting to the effect of urban heat islands, and ultimately addressing the broader challenge of global warming. This study estimates LST in the city of Yazd, Iran, where field and high-resolution thermal image data are scarce. LST is assessed through surface parameters (indices) available from Landsat-8 satellite images for two contrasting seasons—winter and summer of 2019 and 2020, and then it is estimated for 2021. The LST is modeled using six machine learning algorithms implemented in R software (version 4.0.2). The accuracy of the models is measured using root mean square error (RMSE), mean absolute error (MAE), root mean square logarithmic error (RMSLE), and mean and standard deviation of the different performance indicators. The results show that the gradient boosting model (GBM) machine learning algorithm is the most accurate in estimating LST. The albedo and NDVI are the surface features with the greatest impact on LST for both the summer (with 80.3% and 11.27% of importance) and winter (with 72.74% and 17.21% of importance). The estimated LST for 2021 showed acceptable accuracy for both seasons. The GBM models for each of the seasons are useful for modeling and estimating the LST based on surface parameters using machine learning, and to support decision-making related to spatial variations in urban surface temperatures. The method developed can help to better understand the urban heat island effect and ultimately support mitigation strategies to improve human well-being and enhance resilience to climate change.
- 24 January 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (3) , 454
Open AccessModeling and Estimating the Land Surface Temperature (LST) Using Remote Sensing and Machine Learning (Case Study: Yazd, Iran)
The pressing issue of global warming is particularly evident in urban areas, where urban thermal islands amplify the warming effect. Understanding land surface temperature (LST) changes is crucial in mitigating and adapting to the effect of urban heat islands, and ultimately addressing the broader challenge of global warming. This study estimates LST in the city of Yazd, Iran, where field and high-resolution thermal image data are scarce. LST is assessed through surface parameters (indices) available from Landsat-8 satellite images for two contrasting seasons—winter and summer of 2019 and 2020, and then it is estimated for 2021. The LST is modeled using six machine learning algorithms implemented in R software (version 4.0.2). The accuracy of the models is measured using root mean square error (RMSE), mean absolute error (MAE), root mean square logarithmic error (RMSLE), and mean and standard deviation of the different performance indicators. The results show that the gradient boosting model (GBM) machine learning algorithm is the most accurate in estimating LST. The albedo and NDVI are the surface features with the greatest impact on LST for both the summer (with 80.3% and 11.27% of importance) and winter (with 72.74% and 17.21% of importance). The estimated LST for 2021 showed acceptable accuracy for both seasons. The GBM models for each of the seasons are useful for modeling and estimating the LST based on surface parameters using machine learning, and to support decision-making related to spatial variations in urban surface temperatures. The method developed can help to better understand the urban heat island effect and ultimately support mitigation strategies to improve human well-being and enhance resilience to climate change.
- Open Access
- 21 October 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (10) , 1589
Improving the Accuracy of Landsat 8 Land Surface Temperature in Arid Regions by MODIS Water Vapor Imagery
Land surface temperature (LST) is a significant environmental factor in many studies. LST estimation methods require various parameters, such as emissivity, temperature, atmospheric transmittance and water vapor. Uncertainty in these parameters can cause error in LST estimation. The present study shows how the moderate resolution imaging spectroradiometer (MODIS) water vapor imagery can improve the accuracy of Landsat 8 LST in different land covers of arid regions of Yazd province in Iran. For this purpose, water vapor variation is analyzed for different land covers within different seasons. Validation is performed using T-based and cross-validation methods. The image of atmospheric water vapor is estimated using the MODIS sensor, and its changes are investigated in different land covers. The bare lands and sparse vegetation show the highest and lowest accuracy levels for T-based validation, respectively. The root mean square error (RMSE) is also calculated as 0.57 °C and 1.41 °C for the improved and general split-window (SW) algorithms, respectively. The cross-validation results show that the use of the MODIS water vapor imagery in the SW algorithm leads to a reduction of about 2.2% in the area where the RMSE group is above 5 °C.
- 21 October 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (10) , 1589
Open AccessImproving the Accuracy of Landsat 8 Land Surface Temperature in Arid Regions by MODIS Water Vapor Imagery
Land surface temperature (LST) is a significant environmental factor in many studies. LST estimation methods require various parameters, such as emissivity, temperature, atmospheric transmittance and water vapor. Uncertainty in these parameters can cause error in LST estimation. The present study shows how the moderate resolution imaging spectroradiometer (MODIS) water vapor imagery can improve the accuracy of Landsat 8 LST in different land covers of arid regions of Yazd province in Iran. For this purpose, water vapor variation is analyzed for different land covers within different seasons. Validation is performed using T-based and cross-validation methods. The image of atmospheric water vapor is estimated using the MODIS sensor, and its changes are investigated in different land covers. The bare lands and sparse vegetation show the highest and lowest accuracy levels for T-based validation, respectively. The root mean square error (RMSE) is also calculated as 0.57 °C and 1.41 °C for the improved and general split-window (SW) algorithms, respectively. The cross-validation results show that the use of the MODIS water vapor imagery in the SW algorithm leads to a reduction of about 2.2% in the area where the RMSE group is above 5 °C.
- Open Access
- 11 September 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (18) , 4468
Trend of Changes in Phenological Components of Iran’s Vegetation Using Satellite Observations
Investigating vegetation changes, especially plant phenology, can yield valuable information about global warming and climate change. Time series satellite observations and remote sensing methods offer a great source of information on distinctions and changing aspects of vegetation. The current study aimed to determine the trend and rate of changes in some phenological components of Iran’s vegetation. In this regard, the current study employed the daily NDVI (Normalized Difference Vegetation Index) product of the AVHRR sensor with a spatial resolution of 0.05° × 0.05°, named AVH13C1. Then, using the HANTS algorithm, images of amplitude zero, annual amplitude, and annual phase were prepared annually from 1982 to 2019. Using TIMESAT software, the starting, end, and length of time of growing season were calculated for each pixel time series to prepare annual maps. The Mann–Kendall statistical test was used to investigate the significance of changes during the study period. On average in the entire area of Iran, the annual phase was declining with a trend of −0.6° per year, and the time for the start and end of the season was declining by −0.3 and −0.65 days per year, respectively. Major changes were noticed in the northeast, west, and northwest regions of Iran, where the annual phase declined with a trend of −0.9° per year. Since the annual growth cycle of the plant (equivalent to 356 days) was in the form of a sinusoidal signal, and the angular changes in the sine wave were between zero and 360°, each degree of change was equivalent to 1.01 days per year. Therefore, the reduction in the annual phase by −0.9 degrees almost means a change in the time (due to the earlier negative start phase) of the start of the annual growth signal by −0.9 days per year. The time of the start and end of the growing season declined by −0.6 and −1.33 days per year, respectively. The reduction in annual phase and differences in time of the starting season from 1982 to 2019 indicate the acceleration and earlier initiation of various phenological processes in the area.
- 11 September 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (18) , 4468
Open AccessTrend of Changes in Phenological Components of Iran’s Vegetation Using Satellite Observations
Investigating vegetation changes, especially plant phenology, can yield valuable information about global warming and climate change. Time series satellite observations and remote sensing methods offer a great source of information on distinctions and changing aspects of vegetation. The current study aimed to determine the trend and rate of changes in some phenological components of Iran’s vegetation. In this regard, the current study employed the daily NDVI (Normalized Difference Vegetation Index) product of the AVHRR sensor with a spatial resolution of 0.05° × 0.05°, named AVH13C1. Then, using the HANTS algorithm, images of amplitude zero, annual amplitude, and annual phase were prepared annually from 1982 to 2019. Using TIMESAT software, the starting, end, and length of time of growing season were calculated for each pixel time series to prepare annual maps. The Mann–Kendall statistical test was used to investigate the significance of changes during the study period. On average in the entire area of Iran, the annual phase was declining with a trend of −0.6° per year, and the time for the start and end of the season was declining by −0.3 and −0.65 days per year, respectively. Major changes were noticed in the northeast, west, and northwest regions of Iran, where the annual phase declined with a trend of −0.9° per year. Since the annual growth cycle of the plant (equivalent to 356 days) was in the form of a sinusoidal signal, and the angular changes in the sine wave were between zero and 360°, each degree of change was equivalent to 1.01 days per year. Therefore, the reduction in the annual phase by −0.9 degrees almost means a change in the time (due to the earlier negative start phase) of the start of the annual growth signal by −0.9 days per year. The time of the start and end of the growing season declined by −0.6 and −1.33 days per year, respectively. The reduction in annual phase and differences in time of the starting season from 1982 to 2019 indicate the acceleration and earlier initiation of various phenological processes in the area.
- Open Access
- 16 August 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (16) , 4053
Identifying and Monitoring Gardens in Urban Areas Using Aerial and Satellite Imagery
In dry regions, gardens and trees within the urban space are of considerable significance. These gardens are facing harsh weather conditions and environmental stresses; on the other hand, due to the high value of land in urban areas, they are constantly subject to destruction and land use change. Therefore, the identification and monitoring of gardens in urban areas in dry regions and their impact on the ecosystem are the aims of this study. The data utilized are aerial and Sentinel-2 images (2018–2022) for Yazd Township in Iran. Several satellite and aerial image fusion methods were employed and compared. The root mean square error (RMSE) of horizontal shortcut connections (HSC) and color normalization (CN) were the highest compared to other methods with values of 18.37 and 17.5, respectively, while the Ehlers method showed the highest accuracy with a RMSE value of 12.3. The normalized difference vegetation index (NDVI) was then calculated using the images with 15 cm spatial resolution retrieved from the fusion. Aerial images were classified by NDVI and digital surface model (DSM) using object-oriented methods. Different object-oriented classification methods were investigated, including support vector machine (SVM), Bayes, random forest (RF), and k-nearest neighbor (KNN). SVM showed the greatest accuracy with overall accuracy (OA) and kappa of 86.2 and 0.89, respectively, followed by RF with OA and kappa of 83.1 and 0.87, respectively. Separating the gardens using NDVI, DSM, and aerial images from 2018, the images were fused in 2022, and the current status of the gardens and associated changes were classified into completely dried, drying, acceptable, and desirable conditions. It was found that gardens with a small area were more prone to destruction, and 120 buildings were built in the existing gardens in the region during 2018–2022. Moreover, the monitoring of land surface temperature (LST) showed an increase of 14 °C in the areas that were changed from gardens to buildings.
- 16 August 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (16) , 4053
Open AccessIdentifying and Monitoring Gardens in Urban Areas Using Aerial and Satellite Imagery
In dry regions, gardens and trees within the urban space are of considerable significance. These gardens are facing harsh weather conditions and environmental stresses; on the other hand, due to the high value of land in urban areas, they are constantly subject to destruction and land use change. Therefore, the identification and monitoring of gardens in urban areas in dry regions and their impact on the ecosystem are the aims of this study. The data utilized are aerial and Sentinel-2 images (2018–2022) for Yazd Township in Iran. Several satellite and aerial image fusion methods were employed and compared. The root mean square error (RMSE) of horizontal shortcut connections (HSC) and color normalization (CN) were the highest compared to other methods with values of 18.37 and 17.5, respectively, while the Ehlers method showed the highest accuracy with a RMSE value of 12.3. The normalized difference vegetation index (NDVI) was then calculated using the images with 15 cm spatial resolution retrieved from the fusion. Aerial images were classified by NDVI and digital surface model (DSM) using object-oriented methods. Different object-oriented classification methods were investigated, including support vector machine (SVM), Bayes, random forest (RF), and k-nearest neighbor (KNN). SVM showed the greatest accuracy with overall accuracy (OA) and kappa of 86.2 and 0.89, respectively, followed by RF with OA and kappa of 83.1 and 0.87, respectively. Separating the gardens using NDVI, DSM, and aerial images from 2018, the images were fused in 2022, and the current status of the gardens and associated changes were classified into completely dried, drying, acceptable, and desirable conditions. It was found that gardens with a small area were more prone to destruction, and 120 buildings were built in the existing gardens in the region during 2018–2022. Moreover, the monitoring of land surface temperature (LST) showed an increase of 14 °C in the areas that were changed from gardens to buildings.
- Open Access
Proof of evidence of changes in global terrestrial biomes using historic and recent NDVI time series
- Open Access
- 5 July 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (13) , 3227
Investigating the Ability to Identify New Constructions in Urban Areas Using Images from Unmanned Aerial Vehicles, Google Earth, and Sentinel-2
One of the main problems in developing countries is unplanned urban growth and land use change. Timely identification of new constructions can be a good solution to mitigate some environmental and social problems. This study examined the possibility of identifying new constructions in urban areas using images from unmanned aerial vehicles (UAV), Google Earth and Sentinel-2. The accuracy of the land cover map obtained using these images was investigated using pixel-based processing methods (maximum likelihood, minimum distance, Mahalanobis, spectral angle mapping (SAM)) and object-based methods (Bayes, support vector machine (SVM), K-nearest-neighbor (KNN), decision tree, random forest). The use of DSM to increase the accuracy of classification of UAV images and the use of NDVI to identify vegetation in Sentinel-2 images were also investigated. The object-based KNN method was found to have the greatest accuracy in classifying UAV images (kappa coefficient = 0.93), and the use of DSM increased the classification accuracy by 4%. Evaluations of the accuracy of Google Earth images showed that KNN was also the best method for preparing a land cover map using these images (kappa coefficient = 0.83). The KNN and SVM methods showed the highest accuracy in preparing land cover maps using Sentinel-2 images (kappa coefficient = 0.87 and 0.85, respectively). The accuracy of classification was not increased when using NDVI due to the small percentage of vegetation cover in the study area. On examining the advantages and disadvantages of the different methods, a novel method for identifying new rural constructions was devised. This method uses only one UAV imaging per year to determine the exact position of urban areas with no constructions and then examines spectral changes in related Sentinel-2 pixels that might indicate new constructions in these areas. On-site observations confirmed the accuracy of this method.
- 5 July 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (13) , 3227
Open AccessInvestigating the Ability to Identify New Constructions in Urban Areas Using Images from Unmanned Aerial Vehicles, Google Earth, and Sentinel-2
One of the main problems in developing countries is unplanned urban growth and land use change. Timely identification of new constructions can be a good solution to mitigate some environmental and social problems. This study examined the possibility of identifying new constructions in urban areas using images from unmanned aerial vehicles (UAV), Google Earth and Sentinel-2. The accuracy of the land cover map obtained using these images was investigated using pixel-based processing methods (maximum likelihood, minimum distance, Mahalanobis, spectral angle mapping (SAM)) and object-based methods (Bayes, support vector machine (SVM), K-nearest-neighbor (KNN), decision tree, random forest). The use of DSM to increase the accuracy of classification of UAV images and the use of NDVI to identify vegetation in Sentinel-2 images were also investigated. The object-based KNN method was found to have the greatest accuracy in classifying UAV images (kappa coefficient = 0.93), and the use of DSM increased the classification accuracy by 4%. Evaluations of the accuracy of Google Earth images showed that KNN was also the best method for preparing a land cover map using these images (kappa coefficient = 0.83). The KNN and SVM methods showed the highest accuracy in preparing land cover maps using Sentinel-2 images (kappa coefficient = 0.87 and 0.85, respectively). The accuracy of classification was not increased when using NDVI due to the small percentage of vegetation cover in the study area. On examining the advantages and disadvantages of the different methods, a novel method for identifying new rural constructions was devised. This method uses only one UAV imaging per year to determine the exact position of urban areas with no constructions and then examines spectral changes in related Sentinel-2 pixels that might indicate new constructions in these areas. On-site observations confirmed the accuracy of this method.