Kamal Ahmad Rashed
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kamal Ahmad Rashed has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Younis Mustafa Alshkane
University of Sulaimani
5 shared publications - Alle A. Hussein
College of Engineering - University of Sulaimani Iraq, Sulaymaniyah
2 shared publications - Hyam Saleh Daoud
University of sulaimani, Sulaimani, Iraq
2 shared publications - Saif Alzabeebee
Department of Roads and Transport Engineering, College of Engineering, University of Al-Qadisiyah, Al-Qadisiyah, Iraq
2 shared publications - Abbas Jawad Al-Taie
Al-Nahrain University
1 shared publication - Diyari Abdalrahman Mohammed
Department of Civil Engineering, College of Engineering, University of Sulaimani, Sulaimani, Iraq
1 shared publication
Latest Publications
- 18 February 2025
- Published by Salahaddin University- Erbil - Conferences
Estimation of Soaked California Bearing Ratio using Compaction Characteristics and Liquid Limit for Cohesive Soils in Iraq
Developing reliable models to predict engineering parameters is an effective strategy to reduce the time needed for tests and the overall cost of the project. One of the extensively used parameters in highway construction projects is the California Bearing Ratio (CBR), which is of the significant parameter in road layers. In this study, the goal is to investigate the possibility of predicting CBR values of fine-grained soil from soil index properties for subgrade made from cohesive materials. The simple regression using one variable and multiple regression analysis using multi variable have been investigated to estimate CBR values. Three geotechnical parameters have been utilized in the analysis: Maximum Dry Density (MDD), Optimum Moisture Content (OMC), and Liquid Limit (LL). The results have been validated using Root Mean Square error (RMSE) and Coefficient of determination (R2). From the simple regression analysis (using only one variable), a useful model was developed to predict CBR value using OMC with R2 of 0.95 and RMSE of 0.38 %. From the multi-linear regression analysis, a model to predict CBR from LL, OMC and MDD with R2 of 0.94 and RMSE of 0.4% is also developed. In addition, simple models were developed to estimate the compaction characteristics from the LL index.
- 18 February 2025
- Published by Salahaddin University- Erbil - Conferences
Estimation of Soaked California Bearing Ratio using Compaction Characteristics and Liquid Limit for Cohesive Soils in Iraq
Developing reliable models to predict engineering parameters is an effective strategy to reduce the time needed for tests and the overall cost of the project. One of the extensively used parameters in highway construction projects is the California Bearing Ratio (CBR), which is of the significant parameter in road layers. In this study, the goal is to investigate the possibility of predicting CBR values of fine-grained soil from soil index properties for subgrade made from cohesive materials. The simple regression using one variable and multiple regression analysis using multi variable have been investigated to estimate CBR values. Three geotechnical parameters have been utilized in the analysis: Maximum Dry Density (MDD), Optimum Moisture Content (OMC), and Liquid Limit (LL). The results have been validated using Root Mean Square error (RMSE) and Coefficient of determination (R2). From the simple regression analysis (using only one variable), a useful model was developed to predict CBR value using OMC with R2 of 0.95 and RMSE of 0.38 %. From the multi-linear regression analysis, a model to predict CBR from LL, OMC and MDD with R2 of 0.94 and RMSE of 0.4% is also developed. In addition, simple models were developed to estimate the compaction characteristics from the LL index.
- 22 September 2021
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 14 (19) , 1-17
Evolutionary computing of the compression index of fine-grained soils
- 22 September 2021
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 14 (19) , 1-17
Evolutionary computing of the compression index of fine-grained soils
- 21 August 2021
- Published by Springer Nature in Soft Computing
- Vol. 25 (24) , 15297-15312
Soft computing of the recompression index of fine-grained soils
- 21 August 2021
- Published by Springer Nature in Soft Computing
- Vol. 25 (24) , 15297-15312
Soft computing of the recompression index of fine-grained soils
- Open Access
- 1 June 2020
- Published by Journal of Engineering in Journal of Engineering
- Vol. 26 (6) , 152-171
GIS as A Tool for Expansive Soil Detection at Sulaymaniyah City
Geotechnical engineering like any other engineering field has to develop and cope with new technologies. This article intends to investigate the spatial relationships between soil’s liquid limit (LL), plasticity index (PI) and Liquidity index (LI) for particular zones of Sulaymaniyah City. The main objective is to study the ability to produce digital soil maps for the study area and determine regions of high expansive soil. Inverse Distance Weighting (IDW) interpolation tool within the GIS (Geographic Information System) program was used to produce the maps. Data from 592 boreholes for LL and PI and 245 boreholes for LI were used for this study. Layers were allocated into three depth ranges (1 to 2, 2 to 4 and 4 to 6) m. A total of 1396 observations were used for producing the maps for both LL and PI, and 371 data for LI. Based on the results, the IDW method gives reasonable predictions depending on the results of R2 and RMSE. The results also showed that the study area has relatively large zones of high expansive soil that must be taken into considerations before performing any construction activity. These maps are essential for helping geotechnical engineers in making decisions and visualizing soils’ behaviors.
- 1 June 2020
- Published by Journal of Engineering in Journal of Engineering
- Vol. 26 (6) , 152-171
Open AccessGIS as A Tool for Expansive Soil Detection at Sulaymaniyah City
Geotechnical engineering like any other engineering field has to develop and cope with new technologies. This article intends to investigate the spatial relationships between soil’s liquid limit (LL), plasticity index (PI) and Liquidity index (LI) for particular zones of Sulaymaniyah City. The main objective is to study the ability to produce digital soil maps for the study area and determine regions of high expansive soil. Inverse Distance Weighting (IDW) interpolation tool within the GIS (Geographic Information System) program was used to produce the maps. Data from 592 boreholes for LL and PI and 245 boreholes for LI were used for this study. Layers were allocated into three depth ranges (1 to 2, 2 to 4 and 4 to 6) m. A total of 1396 observations were used for producing the maps for both LL and PI, and 371 data for LI. Based on the results, the IDW method gives reasonable predictions depending on the results of R2 and RMSE. The results also showed that the study area has relatively large zones of high expansive soil that must be taken into considerations before performing any construction activity. These maps are essential for helping geotechnical engineers in making decisions and visualizing soils’ behaviors.
- 27 February 2020
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 38 (4) , 3683-3695
Unconfined Compressive Strength (UCS) and Compressibility Indices Predictions from Dynamic Cone Penetrometer Index (DCP) for Cohesive Soil in Kurdistan Region/Iraq
- 27 February 2020
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 38 (4) , 3683-3695
Unconfined Compressive Strength (UCS) and Compressibility Indices Predictions from Dynamic Cone Penetrometer Index (DCP) for Cohesive Soil in Kurdistan Region/Iraq
- Open Access
- 16 May 2016
- Published by University of Sulaimani in Journal of Zankoy Sulaimani - Part A
- Vol. 19 (3-4) , 57-72
Correlations of Uniaxial Compressive Strength and Modulus of Elasticity with Point Load Strength Index, Pulse Velocity and Dry Density of Limestone and Sandstone Rocks in Sulaimani Governorate, Kurdistan Region, Iraq.
The Uniaxial Compressive Strength (UCS) of rocks is important parameter in design of geotechnical engineering. If the rocks are affected by weathering agents, there will be difficult to obtain intact samples and to determine UCS in laboratory.Hence, the use of another engineering index of rocks as an alternative for determining UCShave been studied and investigated by researchers. The Pulse Velocity and Point Load tests are used as a quick, easy and non-expensive means of obtaining rock strength indexes. This paper presents an experimental study for correlating between Uiaxial Compressive Strength (UCS) and Point Load Index (PLI), Pulse Velocity (Vp), Dry Density andModulus of Elasticity (E) of limestones and sandstone rock samples. 80 specimens of limestones were obtained from Pila Spi and Lower Fars Formations and 46 specimens of sandstone were obtained from Tanjero ormation. Based on the results, for the first time in this region, a new good correlation is introduced to estimate the UCS and Efrom Pulse Velocity, Point Load Index and Dry Density.
- 16 May 2016
- Published by University of Sulaimani in Journal of Zankoy Sulaimani - Part A
- Vol. 19 (3-4) , 57-72
Open AccessCorrelations of Uniaxial Compressive Strength and Modulus of Elasticity with Point Load Strength Index, Pulse Velocity and Dry Density of Limestone and Sandstone Rocks in Sulaimani Governorate, Kurdistan Region, Iraq.
The Uniaxial Compressive Strength (UCS) of rocks is important parameter in design of geotechnical engineering. If the rocks are affected by weathering agents, there will be difficult to obtain intact samples and to determine UCS in laboratory.Hence, the use of another engineering index of rocks as an alternative for determining UCShave been studied and investigated by researchers. The Pulse Velocity and Point Load tests are used as a quick, easy and non-expensive means of obtaining rock strength indexes. This paper presents an experimental study for correlating between Uiaxial Compressive Strength (UCS) and Point Load Index (PLI), Pulse Velocity (Vp), Dry Density andModulus of Elasticity (E) of limestones and sandstone rock samples. 80 specimens of limestones were obtained from Pila Spi and Lower Fars Formations and 46 specimens of sandstone were obtained from Tanjero ormation. Based on the results, for the first time in this region, a new good correlation is introduced to estimate the UCS and Efrom Pulse Velocity, Point Load Index and Dry Density.