Xiang Fu
Xiang Fu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Ahmed M. Al-Jumaily
A School of Engineering, Computer and Mathematical Sciences, Institute of Biomedical Technologies, Auckland University of Technology , Auckland , New Zealand
3 shared publicationsMaximiano Ramos
A School of Engineering, Computer and Mathematical Sciences, Institute of Biomedical Technologies, Auckland University of Technology , Auckland , New Zealand
3 shared publications- Ata Meshkinzar
Department of Mechanical Engineering, Auckland University of Technology, Auckland 1010, New Zealand
2 shared publications - Xiyong Huang
Paihau-Robinson Research Institute, Victoria University of Wellington, Lower Hutt, New Zealand
2 shared publications - Ben Wang
College of Mechanical Engineering Yangzhou University Yangzhou China
1 shared publication Chengpeng Jiang
Key Laboratory of Optoelectronic Thin Film Devices and Technology of Tianjin, College of Electronic Information and Optical Engineering, Nankai University, Tianjin 300350, China
1 shared publication
Latest Publications
- 24 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (26) , 16174-16182
The spontaneous directional transformations of the layers and chemical bonds: a study combining first-principles calculations and experiments
We synthesized PtTe2 nanoflakes via chemical transformation utilizing Te nanoflakes as templates. Aberration-corrected transmission electron microscopy confirmed this assertion and revealed the distinctive in-plane layered structure of the synthesized PtTe2 nanoflakes. The transformation process and reaction mechanisms were investigated using particle swarm optimization algorithms in combination with first-principles density functional calculations. According to the calculations, it was found that the initial chemical bonds automatically transition to the cross-sectional direction, representing the first experimental confirmation of the spontaneous directional transformation of layers and chemical bonds within multivalent Te layers. It is noteworthy that this transformation exhibits a significant dimension-dependent characteristic. This study has broadened the range of growth processes for two-dimensional materials, contributing to a better understanding of transformation behaviors between chemical stimuli and nanocrystals.
- 24 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (26) , 16174-16182
The spontaneous directional transformations of the layers and chemical bonds: a study combining first-principles calculations and experiments
We synthesized PtTe2 nanoflakes via chemical transformation utilizing Te nanoflakes as templates. Aberration-corrected transmission electron microscopy confirmed this assertion and revealed the distinctive in-plane layered structure of the synthesized PtTe2 nanoflakes. The transformation process and reaction mechanisms were investigated using particle swarm optimization algorithms in combination with first-principles density functional calculations. According to the calculations, it was found that the initial chemical bonds automatically transition to the cross-sectional direction, representing the first experimental confirmation of the spontaneous directional transformation of layers and chemical bonds within multivalent Te layers. It is noteworthy that this transformation exhibits a significant dimension-dependent characteristic. This study has broadened the range of growth processes for two-dimensional materials, contributing to a better understanding of transformation behaviors between chemical stimuli and nanocrystals.
- 14 October 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (44) , 18780-18788
A high-resolution, ultrabroad-range and sensitive capacitive tactile sensor based on a CNT/PDMS composite for robotic hands
Tactile sensors are of great significance for robotic perception improvement to realize stable object manipulation and accurate object identification. To date, developing a broad-range tactile sensor array with high sensitivity economically remains a critical challenge. In this study, a flexible capacitive tactile sensor array, consisting of a carbon nanotube (CNT)/polydimethylsiloxane (PDMS) film, parylene films, and two polyimide (PI) films patterned with electrodes, is facilely prepared. The CNT/PDMS film, acting as a giant dielectric permittivity material, is utilized to improve the sensitivity, while the parylene film serves as the scaffold architecture to extend the working range of the tactile sensor array. Also, it is promising to realize mass production for this sensor array due to the scalable fabrication procedure. The as-prepared sensor exhibits excellent sensing performance with a high sensitivity of 1.61% kPa−1 (<1 MPa), an ultra-broad pressure working range of 0.9 kPa–2.55 MPa, an outstanding durability, a stability up to 5000 cycles, and a fast response time. By integrating our tactile sensor array with a robotic gripper, we show that robots can successfully differentiate object shapes and manipulate light and heavy objects with a closed-loop pressure feedback, demonstrating its great potential in robotic perception and wearable applications.
- 14 October 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (44) , 18780-18788
A high-resolution, ultrabroad-range and sensitive capacitive tactile sensor based on a CNT/PDMS composite for robotic hands
Tactile sensors are of great significance for robotic perception improvement to realize stable object manipulation and accurate object identification. To date, developing a broad-range tactile sensor array with high sensitivity economically remains a critical challenge. In this study, a flexible capacitive tactile sensor array, consisting of a carbon nanotube (CNT)/polydimethylsiloxane (PDMS) film, parylene films, and two polyimide (PI) films patterned with electrodes, is facilely prepared. The CNT/PDMS film, acting as a giant dielectric permittivity material, is utilized to improve the sensitivity, while the parylene film serves as the scaffold architecture to extend the working range of the tactile sensor array. Also, it is promising to realize mass production for this sensor array due to the scalable fabrication procedure. The as-prepared sensor exhibits excellent sensing performance with a high sensitivity of 1.61% kPa−1 (<1 MPa), an ultra-broad pressure working range of 0.9 kPa–2.55 MPa, an outstanding durability, a stability up to 5000 cycles, and a fast response time. By integrating our tactile sensor array with a robotic gripper, we show that robots can successfully differentiate object shapes and manipulate light and heavy objects with a closed-loop pressure feedback, demonstrating its great potential in robotic perception and wearable applications.
- 13 June 2019
- Published by Taylor & Francis in Journal of Biomaterials Science, Polymer Edition
- Vol. 30 (13) , 1227-1241
Stretchable and sensitive sensor based on carbon nanotubes/polymer composite with serpentine shapes via molding technique
With the rapid development of wearable devices in recent years, stretchable strain sensors based on electrically conductive composites have attracted a great deal of attention owing to their good stretchability and piezoresistivity. However, due to the intrinsic restriction of these types of composites, the conventional stretchable strain sensors cannot do well in all aspect of sensing performance. A stretchable strain sensor based on carbon nanotubes/poly(dimethylsiloxane) composite with the serpentine shape was devised and fabricated. The sensor was readily manufactured through a molding technique. Not only can this sensor distinguish tension strain from transverse or longitudinal direction, but also exhibits good linearity of response to tensile strain. In terms of sensitivity, hysteresis and response time, the stretchable strain sensor showed significant performance. The sensing performance of this proposed stretchable sensor has been demonstrated to be good in this work and it also shows a good prospect for utilization in multifunctional wearable devices.
- 13 June 2019
- Published by Taylor & Francis in Journal of Biomaterials Science, Polymer Edition
- Vol. 30 (13) , 1227-1241
Stretchable and sensitive sensor based on carbon nanotubes/polymer composite with serpentine shapes via molding technique
With the rapid development of wearable devices in recent years, stretchable strain sensors based on electrically conductive composites have attracted a great deal of attention owing to their good stretchability and piezoresistivity. However, due to the intrinsic restriction of these types of composites, the conventional stretchable strain sensors cannot do well in all aspect of sensing performance. A stretchable strain sensor based on carbon nanotubes/poly(dimethylsiloxane) composite with the serpentine shape was devised and fabricated. The sensor was readily manufactured through a molding technique. Not only can this sensor distinguish tension strain from transverse or longitudinal direction, but also exhibits good linearity of response to tensile strain. In terms of sensitivity, hysteresis and response time, the stretchable strain sensor showed significant performance. The sensing performance of this proposed stretchable sensor has been demonstrated to be good in this work and it also shows a good prospect for utilization in multifunctional wearable devices.
- 24 September 2018
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (3) , 2170-2180
Stretchable strain sensor facilely fabricated based on multi-wall carbon nanotube composites with excellent performance
- 24 September 2018
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (3) , 2170-2180
Stretchable strain sensor facilely fabricated based on multi-wall carbon nanotube composites with excellent performance
- 4 September 2018
- Published by Springer Nature in Journal of Materials Research
- Vol. 33 (20) , 3398-3407
Comprehensive analysis on the electrical behavior of highly stretchable carbon nanotubes/polymer composite through numerical simulation
- 4 September 2018
- Published by Springer Nature in Journal of Materials Research
- Vol. 33 (20) , 3398-3407
Comprehensive analysis on the electrical behavior of highly stretchable carbon nanotubes/polymer composite through numerical simulation
- 13 December 2010
- Published by Wiley in Polymer Composites
- Vol. 32 (1) , 52-58
High temperature vacuum assisted resin transfer molding of phenylethynyl terminated imide composites
Vacuum Assisted Resin Transfer Molding (VARTM) has proven to be a cost effective process for manufacturing composite structures compared with prepreg/autoclave and traditional resin transfer molding (RTM) processes. However, VARTM has not been accomplished with high temperature resins (such as polyimides) until recently, primarily because no resins had low melt viscosity and long melt stability that are required by VARTM. With the recent invention of phenylethynyl terminated imides (PETIs), high temperature VARTM has been achieved. Two processing methods, in‐plane and through‐thickness resin flow, were proposed and tested. Both methods are capable of fabricating polyimide matrix composites; and the carbon fiber laminates yield good fiber‐resin interfacial bonding and comparable mechanical properties to those laminates fabricated using RTM. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers
- 13 December 2010
- Published by Wiley in Polymer Composites
- Vol. 32 (1) , 52-58
High temperature vacuum assisted resin transfer molding of phenylethynyl terminated imide composites
Vacuum Assisted Resin Transfer Molding (VARTM) has proven to be a cost effective process for manufacturing composite structures compared with prepreg/autoclave and traditional resin transfer molding (RTM) processes. However, VARTM has not been accomplished with high temperature resins (such as polyimides) until recently, primarily because no resins had low melt viscosity and long melt stability that are required by VARTM. With the recent invention of phenylethynyl terminated imides (PETIs), high temperature VARTM has been achieved. Two processing methods, in‐plane and through‐thickness resin flow, were proposed and tested. Both methods are capable of fabricating polyimide matrix composites; and the carbon fiber laminates yield good fiber‐resin interfacial bonding and comparable mechanical properties to those laminates fabricated using RTM. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers