Walter F. Paxton
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Walter F. Paxton has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Ian M. Henderson
Center for Integrated Nanotechnologies, Sandia National Laboratories, Albuquerque, NM 87185, USA.and Omphalos Bioscience LLC, Albuquerque, NM 87110, USA
7 shared publicationsHaesook Han
University of Nevada Las Vegas 4505 S. Maryland Parkway , P.O. Box 454003
4 shared publicationsNathan E. Pringle
Brigham Young University
4 shared publicationsPradip K. Bhowmik
University of Nevada Las Vegas 4505 S. Maryland Parkway , P.O. Box 454003
4 shared publications- David Dean Allred
Brigham Young University, Department of Physics and Astronomy, Provo, Utah, United States
3 shared publications David King
University of Nevada Las Vegas 4505 S. Maryland Parkway , P.O. Box 454003
3 shared publications
Latest Publications
- 14 November 2026
- Published byĀ Springer NatureĀ inĀ Journal of Materials Science: Materials in Electronics
- Vol.Ā 37 Ā (33)
Critical relative humidity programming in disposable impedance-based humidity sensors
- 14 November 2026
- Published byĀ Springer NatureĀ inĀ Journal of Materials Science: Materials in Electronics
- Vol.Ā 37 Ā (33)
Critical relative humidity programming in disposable impedance-based humidity sensors
- 31 August 2026
- Published byĀ American Chemical Society (ACS)Ā inĀ Langmuir
- Vol.Ā 42 Ā (36) , 26816-26831
Controlling the Surface Structure of Viologen SAMs through Dilution: CV and XPS Studies
Functionalizing electrodes with self-assembled monolayers (SAMs) is a highly tunable way to alter their function and performance. Mixed SAMs of redox-active and inactive molecules can quickly alter electrode function. However, control of the formation process and modeling of the resultant surface structure is challenging. We report the results of experiments that modified Au electrodes with mixed SAMs of viologen and two redox-inactive diluent molecules. Mixed SAMs were formed with the dual purpose of (1) increasing SAM stability through increased molecular density and (2) separating viologen molecules to minimize intermolecular interactions. These mixed SAMs were characterized by cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS). We observed that the polar diluent molecule formed SAMs with an increasingly heterogeneous distribution of viologen microenvironments. The nonpolar diluent molecule formed SAMs with regions of viologen surrounded by diluent molecules. Our results provide valuable insights into controlling electrode functionalization and surface structure with charged redox species through dilution and diluent molecule properties.
- 31 August 2026
- Published byĀ American Chemical Society (ACS)Ā inĀ Langmuir
- Vol.Ā 42 Ā (36) , 26816-26831
Controlling the Surface Structure of Viologen SAMs through Dilution: CV and XPS Studies
Functionalizing electrodes with self-assembled monolayers (SAMs) is a highly tunable way to alter their function and performance. Mixed SAMs of redox-active and inactive molecules can quickly alter electrode function. However, control of the formation process and modeling of the resultant surface structure is challenging. We report the results of experiments that modified Au electrodes with mixed SAMs of viologen and two redox-inactive diluent molecules. Mixed SAMs were formed with the dual purpose of (1) increasing SAM stability through increased molecular density and (2) separating viologen molecules to minimize intermolecular interactions. These mixed SAMs were characterized by cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS). We observed that the polar diluent molecule formed SAMs with an increasingly heterogeneous distribution of viologen microenvironments. The nonpolar diluent molecule formed SAMs with regions of viologen surrounded by diluent molecules. Our results provide valuable insights into controlling electrode functionalization and surface structure with charged redox species through dilution and diluent molecule properties.
- 27 March 2026
- Published byĀ American Chemical Society (ACS)Ā inĀ Langmuir
- Vol.Ā 42 Ā (13) , 9582-9594
A Cyclic Voltammetry Study of Viologen Self-Assembled Monolayer Surface Structure
Modification and functionalization are effective ways to control the function and operation of electrodes. A simple modification process is to form self-assembled monolayers (SAMs) on the electrode surface using redox active molecules. The surface structure of these SAMs impacts the electrode performance, but often the structure is not well understood. In order to fully utilize and optimally functionalize electrodes, it is important to understand the structure at the electrode SAM interface. Herein, we study the surface structure of viologen functionalized Au electrodes through cyclic voltammetry. We demonstrate that cyclic voltammetry can be used to probe the surface structure in two perturbation experiments and propose a model of the viologen SAM. This work provides new insights into the structure of viologen SAM functionalized electrodes including a new coupled redox peak feature in the voltammogram and demonstrates the use of varying scan speed during cyclic voltammetry surface characterization to alter the redox center position in the monolayer. The new redox peak feature was not observed when the scan rate changed from 0.500 VĀ·s-1 to 0.010 VĀ·s-1, which can be attributed to restructuring of the viologen position in the SAM.
- 27 March 2026
- Published byĀ American Chemical Society (ACS)Ā inĀ Langmuir
- Vol.Ā 42 Ā (13) , 9582-9594
A Cyclic Voltammetry Study of Viologen Self-Assembled Monolayer Surface Structure
Modification and functionalization are effective ways to control the function and operation of electrodes. A simple modification process is to form self-assembled monolayers (SAMs) on the electrode surface using redox active molecules. The surface structure of these SAMs impacts the electrode performance, but often the structure is not well understood. In order to fully utilize and optimally functionalize electrodes, it is important to understand the structure at the electrode SAM interface. Herein, we study the surface structure of viologen functionalized Au electrodes through cyclic voltammetry. We demonstrate that cyclic voltammetry can be used to probe the surface structure in two perturbation experiments and propose a model of the viologen SAM. This work provides new insights into the structure of viologen SAM functionalized electrodes including a new coupled redox peak feature in the voltammogram and demonstrates the use of varying scan speed during cyclic voltammetry surface characterization to alter the redox center position in the monolayer. The new redox peak feature was not observed when the scan rate changed from 0.500 VĀ·s-1 to 0.010 VĀ·s-1, which can be attributed to restructuring of the viologen position in the SAM.
- 7 January 2026
- Published byĀ Springer NatureĀ inĀ Journal of Materials Science
- p. 1-14
Dank sensor materials: single-use humidity threshold indicators based on redox-active composites
- 7 January 2026
- Published byĀ Springer NatureĀ inĀ Journal of Materials Science
- p. 1-14
Dank sensor materials: single-use humidity threshold indicators based on redox-active composites
- 28 October 2025
- Published byĀ American Vacuum SocietyĀ inĀ Journal of Vacuum Science & Technology A
- Vol.Ā 43 Ā (6)
Investigating the dust mitigation abilities of dissociative degradation
Particulate contamination requires dust mitigation techniques to provide low-scatter surfaces on sensitive instrumentation in space. We have shown that poly(olefin sulfone)s photodegrade under spacelike conditions: in vacuum and with UV light exposure. We now demonstrate that photodegradable polymers can reduce dust accumulation on optical surfaces for space applications. This investigation shows that the dissociative degradation of poly(olefin sulfone)s significantly decreased the number of dust particles on a dust-coated surface. These results suggest a powerful way to mitigate the collection of extraterrestrial dust on optical surfaces in space, enabling passive removal of particulate contamination without any direct human intervention.
- 28 October 2025
- Published byĀ American Vacuum SocietyĀ inĀ Journal of Vacuum Science & Technology A
- Vol.Ā 43 Ā (6)
Investigating the dust mitigation abilities of dissociative degradation
Particulate contamination requires dust mitigation techniques to provide low-scatter surfaces on sensitive instrumentation in space. We have shown that poly(olefin sulfone)s photodegrade under spacelike conditions: in vacuum and with UV light exposure. We now demonstrate that photodegradable polymers can reduce dust accumulation on optical surfaces for space applications. This investigation shows that the dissociative degradation of poly(olefin sulfone)s significantly decreased the number of dust particles on a dust-coated surface. These results suggest a powerful way to mitigate the collection of extraterrestrial dust on optical surfaces in space, enabling passive removal of particulate contamination without any direct human intervention.
- 29 May 2025
- Published byĀ American Vacuum SocietyĀ inĀ Journal of Vacuum Science & Technology A
- Vol.Ā 43 Ā (4)
Effect of the repeated application of First Contact⢠polymer on xenon-difluoride passivated lithium fluoride on aluminum surfaces for space telescopes
The far-UV (FUV) reflectance of the state-of-the-art, broadband UV/optical/IR mirrors of XeF2-passivated LiF on Al (Al + XeLiF) is promising for future space telescope missions. To reach their potential, dependable cleaning procedures and storage methods for such reflective surfaces need to be developed. First Contact⢠polymer (FCP) formulations have proven to be a reliable method for cleaning conventional mirror surfaces coated with oxides or bare metal and for protecting them in storage. We report here on studies of the cleaning and storage of Al + XeLiF samples using customized FCP formulations designed by Photonic Cleaning Technologies. Cleaning of such mirrors is demanding since fluoride coatings are softer than oxides and can be moisture sensitive. Any damage that marks the overcoat can lead to catastrophic loss of FUV reflectance due to surface roughening and formation of aluminum oxide, which is FUV opaque. We discovered that one formulation could be successfully applied to and removed from Al + XeLiF coatings multiple times. The coatings retained low roughness, minimal aluminum oxide thickness, and high far-UV reflectance. Another of the four FCP formulations successfully cleaned the Al + XeLiF coatings several times. Variable-angle, spectroscopic ellipsometry, tapping-mode atomic force microscopy, x-ray photoelectron spectroscopy, and FUV reflectance allowed us to observe any changes in reflectance and surface roughness, the formation of aluminum oxide, and damage to coating integrity. From the studies of the range of FCP-fluoride interactions, we noted that too much polymer-to-surface adhesion or exposure to trace water in the polymer can result in coating damage.
- 29 May 2025
- Published byĀ American Vacuum SocietyĀ inĀ Journal of Vacuum Science & Technology A
- Vol.Ā 43 Ā (4)
Effect of the repeated application of First Contact⢠polymer on xenon-difluoride passivated lithium fluoride on aluminum surfaces for space telescopes
The far-UV (FUV) reflectance of the state-of-the-art, broadband UV/optical/IR mirrors of XeF2-passivated LiF on Al (Al + XeLiF) is promising for future space telescope missions. To reach their potential, dependable cleaning procedures and storage methods for such reflective surfaces need to be developed. First Contact⢠polymer (FCP) formulations have proven to be a reliable method for cleaning conventional mirror surfaces coated with oxides or bare metal and for protecting them in storage. We report here on studies of the cleaning and storage of Al + XeLiF samples using customized FCP formulations designed by Photonic Cleaning Technologies. Cleaning of such mirrors is demanding since fluoride coatings are softer than oxides and can be moisture sensitive. Any damage that marks the overcoat can lead to catastrophic loss of FUV reflectance due to surface roughening and formation of aluminum oxide, which is FUV opaque. We discovered that one formulation could be successfully applied to and removed from Al + XeLiF coatings multiple times. The coatings retained low roughness, minimal aluminum oxide thickness, and high far-UV reflectance. Another of the four FCP formulations successfully cleaned the Al + XeLiF coatings several times. Variable-angle, spectroscopic ellipsometry, tapping-mode atomic force microscopy, x-ray photoelectron spectroscopy, and FUV reflectance allowed us to observe any changes in reflectance and surface roughness, the formation of aluminum oxide, and damage to coating integrity. From the studies of the range of FCP-fluoride interactions, we noted that too much polymer-to-surface adhesion or exposure to trace water in the polymer can result in coating damage.
- Open Access
- 24 December 2024
- Published byĀ ElsevierĀ inĀ Science of The Total Environment
- Vol.Ā 959, 178202
A ten-year historical analysis of urban PM10 and exceedance filters along the Northern Wasatch Front, UT, USA
- 24 December 2024
- Published byĀ ElsevierĀ inĀ Science of The Total Environment
- Vol.Ā 959, 178202
Open AccessA ten-year historical analysis of urban PM10 and exceedance filters along the Northern Wasatch Front, UT, USA
- 14 November 2024
- Published byĀ American Chemical Society (ACS)Ā inĀ Langmuir
- Vol.Ā 40 Ā (47) , 24781-24794
pH Dependence of Dihydroxyacetone Oxidation by Electrocatalytic Viologen Self-Assembled Monolayers on Gold Electrodes
Carbohydrate fuel cells garner much research interest as the world's focus shifts from fossil fuels to renewable energy. Many catalyst options are available for carbohydrate fuel cell development, including enzymes and microbes, various metal-based catalysts, and natural or synthetic mediators. Research challenges include low power output, system fouling and poisoning, inefficient electron release, and complex mechanisms, with multiple pathways leading to low product selectivity. Here, we further investigate a novel approach to catalyze carbohydrate oxidation using Au electrodes with viologen self-assembled monolayers (SAMs). SAM-mediated fuel cells have the potential to address the challenges of other catalyst systems by protecting the electrode surface and controlling the local concentration and structure to increase current generation. The effects of increasing pH on dihydroxyacetone (DHA) oxidation by three viologen SAMs on Au electrodes are presented. Current and power generated during DHA oxidation at varying pH were measured and compared to those of bare Au performance. Two of the SAMs produced more current and power than bare Au at elevated pH. The SAM system produced more current and peak power per molecule than both dilute and concentrated homogeneous viologen systems in the same cell setup. These results demonstrate the benefits and limitations of electrodes modified with redox-active groups for the production of electricity from simple sugars and other carbohydrate sources. These results are encouraging for the development of new strategies for electrical power generation from renewable resources.
- 14 November 2024
- Published byĀ American Chemical Society (ACS)Ā inĀ Langmuir
- Vol.Ā 40 Ā (47) , 24781-24794
pH Dependence of Dihydroxyacetone Oxidation by Electrocatalytic Viologen Self-Assembled Monolayers on Gold Electrodes
Carbohydrate fuel cells garner much research interest as the world's focus shifts from fossil fuels to renewable energy. Many catalyst options are available for carbohydrate fuel cell development, including enzymes and microbes, various metal-based catalysts, and natural or synthetic mediators. Research challenges include low power output, system fouling and poisoning, inefficient electron release, and complex mechanisms, with multiple pathways leading to low product selectivity. Here, we further investigate a novel approach to catalyze carbohydrate oxidation using Au electrodes with viologen self-assembled monolayers (SAMs). SAM-mediated fuel cells have the potential to address the challenges of other catalyst systems by protecting the electrode surface and controlling the local concentration and structure to increase current generation. The effects of increasing pH on dihydroxyacetone (DHA) oxidation by three viologen SAMs on Au electrodes are presented. Current and power generated during DHA oxidation at varying pH were measured and compared to those of bare Au performance. Two of the SAMs produced more current and power than bare Au at elevated pH. The SAM system produced more current and peak power per molecule than both dilute and concentrated homogeneous viologen systems in the same cell setup. These results demonstrate the benefits and limitations of electrodes modified with redox-active groups for the production of electricity from simple sugars and other carbohydrate sources. These results are encouraging for the development of new strategies for electrical power generation from renewable resources.
- 22 August 2024
- Published byĀ Springer NatureĀ inĀ Analytical and Bioanalytical Chemistry
- Vol.Ā 416 Ā (26) , 5743-5751
Real-time monitoring of voltage-responsive biomolecular binding onto electro-switchable surfaces
Voltage-responsive biosensors capable of monitoring real-time adsorption behavior of biological analytes onto electroactive surfaces offer attractive strategies for disease detection, separations, and other adsorption-dependent analytical techniques. Adsorption of biological analytes onto electrically switchable surfaces can be modelled using neutravidin and biotin. Here, we report self-assembled monolayers formed from voltage-switchable biotinylated molecules on gold surfaces with tunable sensitivity to neutravidin in response to applied voltages. By using electrochemical quartz crystal microbalance (EQCM), we demonstrated real-time switchable behavior of these bio-surfaces and investigate the range of sensitivity by varying the potential of the same surfaces from ā400 mV to open circuit potential (+155 mV) to +300 mV. We compared the tunability of the mixed surfaces to bare Au surfaces, voltage inert surfaces, and switchable biotinylated surfaces. Our results indicate that quartz crystal microbalance allows real-time changes in analyte binding behavior, which enabled observing the evolution of neutravidin sensitivity as the applied voltage was shifted. EQCM could in principle be used in kinetic studies or to optimize voltage-switchable surfaces in adsorption-based diagnostics. Graphical Abstract
- 22 August 2024
- Published byĀ Springer NatureĀ inĀ Analytical and Bioanalytical Chemistry
- Vol.Ā 416 Ā (26) , 5743-5751
Real-time monitoring of voltage-responsive biomolecular binding onto electro-switchable surfaces
Voltage-responsive biosensors capable of monitoring real-time adsorption behavior of biological analytes onto electroactive surfaces offer attractive strategies for disease detection, separations, and other adsorption-dependent analytical techniques. Adsorption of biological analytes onto electrically switchable surfaces can be modelled using neutravidin and biotin. Here, we report self-assembled monolayers formed from voltage-switchable biotinylated molecules on gold surfaces with tunable sensitivity to neutravidin in response to applied voltages. By using electrochemical quartz crystal microbalance (EQCM), we demonstrated real-time switchable behavior of these bio-surfaces and investigate the range of sensitivity by varying the potential of the same surfaces from ā400 mV to open circuit potential (+155 mV) to +300 mV. We compared the tunability of the mixed surfaces to bare Au surfaces, voltage inert surfaces, and switchable biotinylated surfaces. Our results indicate that quartz crystal microbalance allows real-time changes in analyte binding behavior, which enabled observing the evolution of neutravidin sensitivity as the applied voltage was shifted. EQCM could in principle be used in kinetic studies or to optimize voltage-switchable surfaces in adsorption-based diagnostics. Graphical Abstract
- 15 July 2024
- Published byĀ American Chemical Society (ACS)Ā inĀ Langmuir
- Vol.Ā 40 Ā (29) , 15293-15300
Ready, Set, Grow: From Micelles to Giant Vesicles via Biocatalytic Activation
Controlling physicochemical processes that drive changes in supramolecular aggregates is an important objective toward creating artificial soft micro- and nanomachines. Previous research explored the morphology control of membrane-based materials subjected to externally imposed chemical stimuli. Here, we modulate the microscale morphology of pH-responsive assemblies by using biocatalysis to internally generate changes in global pH. Catalytic reactions offer flexibility in the mechanism and rate at which stimuli are introduced to responsive assemblies, ultimately enabling precision and control over size and morphology. We observed, by dynamic light scattering and fluorescence microscopy, substantial microscale differences between assemblies subjected to manually titrated pH changes compared to biocatalytically activated pH changes, including the growth of giant vesicles from micelles. Coarse-grained molecular dynamics simulations of these metastable self-assembled structures provided insight into the thermodynamics and kinetics of the preferred structures. These results demonstrate the feasibility of using biocatalytic reactions to modulate the size and morphology of supramolecular assemblies, from micelles to giant vesicles.
- 15 July 2024
- Published byĀ American Chemical Society (ACS)Ā inĀ Langmuir
- Vol.Ā 40 Ā (29) , 15293-15300
Ready, Set, Grow: From Micelles to Giant Vesicles via Biocatalytic Activation
Controlling physicochemical processes that drive changes in supramolecular aggregates is an important objective toward creating artificial soft micro- and nanomachines. Previous research explored the morphology control of membrane-based materials subjected to externally imposed chemical stimuli. Here, we modulate the microscale morphology of pH-responsive assemblies by using biocatalysis to internally generate changes in global pH. Catalytic reactions offer flexibility in the mechanism and rate at which stimuli are introduced to responsive assemblies, ultimately enabling precision and control over size and morphology. We observed, by dynamic light scattering and fluorescence microscopy, substantial microscale differences between assemblies subjected to manually titrated pH changes compared to biocatalytically activated pH changes, including the growth of giant vesicles from micelles. Coarse-grained molecular dynamics simulations of these metastable self-assembled structures provided insight into the thermodynamics and kinetics of the preferred structures. These results demonstrate the feasibility of using biocatalytic reactions to modulate the size and morphology of supramolecular assemblies, from micelles to giant vesicles.