Mahmood Seifouri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mahmood Seifouri has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Saeed Olyaee
Nano‑photonics and Optoelectronics Research Laboratory (NORLab), Shahid Rajaee Teacher Training University, Tehran, Iran
16 shared publicationsMasoud Mohammadi
Faculty of Electrical Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran
9 shared publications- Saeed Olyaee
Faculty of Electrical Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran
8 shared publications Vahid Fallahi
Department of Electrical and Electronics Engineering, Shiraz University of Technology, Shiraz, Iran
8 shared publications- Masoud Mohammadi
Faculty of Electrical Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran
6 shared publications Mohammad Reza Alizadeh
Faculty of Electrical Engineering, Shahid RajaeeTeacher Training University, Tehran, Iran
5 shared publications
Latest Publications
- Open Access
- 20 November 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 41003
Advanced SPR biosensor with optimized gold-TiO2 D-shaped photonic crystal fiber for precise multi-cancer detection
In this paper, we present the design, investigation, and optimization of a surface plasmon resonance (SPR) biosensor using a D-shaped photonic crystal fiber (PCF) with layers of gold and titanium oxide (TiO₂). The TiO₂ layer is applied on top of the gold layer to enhance sensitivity. This biosensor aims to simplify the manufacturing process while achieving optimal performance through effective coupling. We improved the design by thoroughly analyzing and optimizing various structural parameters to enhance performance. Our biosensor demonstrated exceptional diagnostic accuracy when tested on multiple samples, including cancer cells (Basal, MDA-MB-231, Jurkat, PC-12, and HeLa). The biosensor achieved a maximum wavelength sensitivity (WS) of 42,000 nm/RIU, a maximum amplitude sensitivity (AS) of - 1862.72 RIU, and a maximum figure of merit (FOM) of 1393.128 RIU⁻¹ across the wavelength range from visible to near-infrared and within a refractive index (RI) range of 1.3-1.4. The results indicate that this optimized biosensor exhibits reliable and accurate detection capabilities, capable of measuring minute changes in RI with high precision.
- 20 November 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 41003
Open AccessAdvanced SPR biosensor with optimized gold-TiO2 D-shaped photonic crystal fiber for precise multi-cancer detection
In this paper, we present the design, investigation, and optimization of a surface plasmon resonance (SPR) biosensor using a D-shaped photonic crystal fiber (PCF) with layers of gold and titanium oxide (TiO₂). The TiO₂ layer is applied on top of the gold layer to enhance sensitivity. This biosensor aims to simplify the manufacturing process while achieving optimal performance through effective coupling. We improved the design by thoroughly analyzing and optimizing various structural parameters to enhance performance. Our biosensor demonstrated exceptional diagnostic accuracy when tested on multiple samples, including cancer cells (Basal, MDA-MB-231, Jurkat, PC-12, and HeLa). The biosensor achieved a maximum wavelength sensitivity (WS) of 42,000 nm/RIU, a maximum amplitude sensitivity (AS) of - 1862.72 RIU, and a maximum figure of merit (FOM) of 1393.128 RIU⁻¹ across the wavelength range from visible to near-infrared and within a refractive index (RI) range of 1.3-1.4. The results indicate that this optimized biosensor exhibits reliable and accurate detection capabilities, capable of measuring minute changes in RI with high precision.
- 8 August 2025
- Published by Springer Nature in Plasmonics
- Vol. 20 (12) , 11853-11865
Gold Nanowire-Enhanced SPR-PCF Biosensor for High-Throughput Cancer Cell Detection in Near-Infrared
- 8 August 2025
- Published by Springer Nature in Plasmonics
- Vol. 20 (12) , 11853-11865
Gold Nanowire-Enhanced SPR-PCF Biosensor for High-Throughput Cancer Cell Detection in Near-Infrared
- Open Access
- 8 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 29076
Optimized SPR-PCF sensor for sucrose detection inspired by vertical pupil geometry
In this article, a surface plasmon resonance (SPR) sensor based on photonic crystal fiber (PCF) has been presented for use in detecting the concentration of sucrose solution. This sensor is expertly designed, drawing on the vertical pupil pattern found in the eyes of certain animals to optimize the concentration of the electromagnetic field at the center of the structure. The primary objective is achieving superior amplitude sensitivity (AS) while minimizing losses. To ensure this, we have applied the Nelder-Mead algorithm for precise optimization of the structural parameters. For the analysis of this structure, the finite element method based on the mode solver has been used. After analyzing and optimizing the sensor, maximum wavelength sensitivity (WS) of 12,000 nm/RIU, AS of -5430.24 RIU-1, and maximum figure of merit (FOM) of 315.9077 RIU-1 were obtained. Finally, in order to investigate the application of this sensor as a sensor for determining the concentration of sucrose solution, it has shown the values of 13,000 nm/RIU, -6202.62 RIU-1, and 356.93 RIU-1 for WS, AS, and FOM respectively related to the concentration of 45%, which shows its excellent performance in refractive index (RI) detection applications. Due to the absence of structural complications and being immune to manufacturing errors caused by small air holes, this design is considered to be an excellent impression of natural elements by providing ultra-high sensitivity.
- 8 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 29076
Open AccessOptimized SPR-PCF sensor for sucrose detection inspired by vertical pupil geometry
In this article, a surface plasmon resonance (SPR) sensor based on photonic crystal fiber (PCF) has been presented for use in detecting the concentration of sucrose solution. This sensor is expertly designed, drawing on the vertical pupil pattern found in the eyes of certain animals to optimize the concentration of the electromagnetic field at the center of the structure. The primary objective is achieving superior amplitude sensitivity (AS) while minimizing losses. To ensure this, we have applied the Nelder-Mead algorithm for precise optimization of the structural parameters. For the analysis of this structure, the finite element method based on the mode solver has been used. After analyzing and optimizing the sensor, maximum wavelength sensitivity (WS) of 12,000 nm/RIU, AS of -5430.24 RIU-1, and maximum figure of merit (FOM) of 315.9077 RIU-1 were obtained. Finally, in order to investigate the application of this sensor as a sensor for determining the concentration of sucrose solution, it has shown the values of 13,000 nm/RIU, -6202.62 RIU-1, and 356.93 RIU-1 for WS, AS, and FOM respectively related to the concentration of 45%, which shows its excellent performance in refractive index (RI) detection applications. Due to the absence of structural complications and being immune to manufacturing errors caused by small air holes, this design is considered to be an excellent impression of natural elements by providing ultra-high sensitivity.
- 10 March 2025
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 57 (3) , 1-18
Design of an ultra-compact As2Se3 waveguide for enhanced optical frequency comb generation
- 10 March 2025
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 57 (3) , 1-18
Design of an ultra-compact As2Se3 waveguide for enhanced optical frequency comb generation
- 17 January 2025
- Published by Springer Nature in Plasmonics
- Vol. 20 (9) , 7081-7088
Design and Simulation of a D-Shaped Plasmonic Biosensor Utilizing Dual-Core Photonic Crystal Fiber
- 17 January 2025
- Published by Springer Nature in Plasmonics
- Vol. 20 (9) , 7081-7088
Design and Simulation of a D-Shaped Plasmonic Biosensor Utilizing Dual-Core Photonic Crystal Fiber
- RetractionOpen Access
- 9 September 2024
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 56 (9) , 1
Retraction Note: Design, simulation and optimization of an ultracompact all-optical encoder based on 2D-PC
- 9 September 2024
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 56 (9) , 1
RetractionOpen AccessRetraction Note: Design, simulation and optimization of an ultracompact all-optical encoder based on 2D-PC
- 17 June 2024
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 56 (7) , 1-23
Highly sensitive dual-side polished SPR PCF sensor for ultra-wide analyte range in the visible to near-IR operating band
- 17 June 2024
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 56 (7) , 1-23
Highly sensitive dual-side polished SPR PCF sensor for ultra-wide analyte range in the visible to near-IR operating band
- 31 January 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
- Vol. 34 (04)
Dual gas sensor based on anti-resonant hollow-core fiber for detection of CO2 and CH4 with different absorption lines
The simultaneous detection of a mixture of two gases with the aid of unique and excellent capabilities of anti-resonance hollow-core fibers (AR-HCF), is numerically investigated in this article. Low-loss transmission bands in near and mid-infrared, which correspond to the transition of methane (CH[ ] and carbon dioxide (CO[ ], are considered in this work. Reasonable consideration of structural parameters has caused the low-loss transmission band covering 1.57 [ ]m and 3.33 [ ]m wavelengths. The second harmonics caused by the interaction of the laser beam and the gas sample inside the hollow core of the fiber were analyzed utilizing the fast Fourier transform (FFT) method. The maximum amplitude for the corresponding frequency at the determined concentration has reached 3002 [ ] for CH4 and 6381 [ ] for CO2. Enhancement of the inhibited coupling between the fundamental mode and some of the cladding modes and leakage loss reduction, extra capillary tubes nested inside the silica tubes forming the fiber cladding. The simulation results confirm the suitability of the proposed structure for efficient utilization in gas sensing applications for two different spectral ranges in the near and mid-infrared. Benefiting from a large hollow core, very low background noise and anti-resonance properties, high sensitivity of about 99.6% and confinement loss of 0.127 dB/m were obtained.
- 31 January 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
- Vol. 34 (04)
Dual gas sensor based on anti-resonant hollow-core fiber for detection of CO2 and CH4 with different absorption lines
The simultaneous detection of a mixture of two gases with the aid of unique and excellent capabilities of anti-resonance hollow-core fibers (AR-HCF), is numerically investigated in this article. Low-loss transmission bands in near and mid-infrared, which correspond to the transition of methane (CH[ ] and carbon dioxide (CO[ ], are considered in this work. Reasonable consideration of structural parameters has caused the low-loss transmission band covering 1.57 [ ]m and 3.33 [ ]m wavelengths. The second harmonics caused by the interaction of the laser beam and the gas sample inside the hollow core of the fiber were analyzed utilizing the fast Fourier transform (FFT) method. The maximum amplitude for the corresponding frequency at the determined concentration has reached 3002 [ ] for CH4 and 6381 [ ] for CO2. Enhancement of the inhibited coupling between the fundamental mode and some of the cladding modes and leakage loss reduction, extra capillary tubes nested inside the silica tubes forming the fiber cladding. The simulation results confirm the suitability of the proposed structure for efficient utilization in gas sensing applications for two different spectral ranges in the near and mid-infrared. Benefiting from a large hollow core, very low background noise and anti-resonance properties, high sensitivity of about 99.6% and confinement loss of 0.127 dB/m were obtained.
- 12 December 2023
- Published by World Scientific Pub Co Pte Ltd in Modern Physics Letters B
- Vol. 38 (18)
Theoretical investigation and optimization of rotation sensing in the new photonic crystal gyroscope based on the Sagnac effect using nonlinear photonic resonators
In this research, the angular rotation speed in a passive photonic gyroscope based on the combination of side nanoring resonators and compensating waveguides has been analyzed by creating nonlinear effects in the control factors of the rings using the Sagnac effect. This structure consists of a central waveguide, two identical square resonators, and an almost U-shaped waveguide. The U-shaped waveguide causes coupling between the two resonators in a counterclockwise (CCW) mode. In this structure, a phase shift has been created in the output from the interference of two clockwise (CW) and CCW waves inside the resonators, and according to this phase shift and the central wavelength, the angular rotation speed has been estimated. In the proposed design of the gyroscope, by managing the nonlinear effects in the radius and refractive index (RI) of the coupling and inner rods, we have been able to control the changes in power, phase, and wavelength of the output from the device. With the increase in the intensity of power, the output power has an increasing slope at first, and at the point of creating a nonlinear effect in the sensor, the output power slope decreases. Also, this nonlinear effect directly affects the output phase of the structure. The maximum angular rotation speed in this gyroscope was [ ]/s. By changing the RI of the inner rods from 3.2 to 3.7, the maximum output-to-input power ratio changes from 0.38 W/[ ]m2 to 0.75 W/[ ]m2. By changing the radius of the coupling rods from 93 nm to 97 nm, the maximum power ratio decreases from 0.78 W/[ ]m2 to 0.55 W/[ ]m2. The field distribution profile and photonic bandgap in this gyroscope have been analyzed using the finite-difference time-domain (FDTD) and plane-wave expansion (PWE) methods, respectively. Also, the gyroscope has a footprint of 163.5 [ ]m2.
- 12 December 2023
- Published by World Scientific Pub Co Pte Ltd in Modern Physics Letters B
- Vol. 38 (18)
Theoretical investigation and optimization of rotation sensing in the new photonic crystal gyroscope based on the Sagnac effect using nonlinear photonic resonators
In this research, the angular rotation speed in a passive photonic gyroscope based on the combination of side nanoring resonators and compensating waveguides has been analyzed by creating nonlinear effects in the control factors of the rings using the Sagnac effect. This structure consists of a central waveguide, two identical square resonators, and an almost U-shaped waveguide. The U-shaped waveguide causes coupling between the two resonators in a counterclockwise (CCW) mode. In this structure, a phase shift has been created in the output from the interference of two clockwise (CW) and CCW waves inside the resonators, and according to this phase shift and the central wavelength, the angular rotation speed has been estimated. In the proposed design of the gyroscope, by managing the nonlinear effects in the radius and refractive index (RI) of the coupling and inner rods, we have been able to control the changes in power, phase, and wavelength of the output from the device. With the increase in the intensity of power, the output power has an increasing slope at first, and at the point of creating a nonlinear effect in the sensor, the output power slope decreases. Also, this nonlinear effect directly affects the output phase of the structure. The maximum angular rotation speed in this gyroscope was [ ]/s. By changing the RI of the inner rods from 3.2 to 3.7, the maximum output-to-input power ratio changes from 0.38 W/[ ]m2 to 0.75 W/[ ]m2. By changing the radius of the coupling rods from 93 nm to 97 nm, the maximum power ratio decreases from 0.78 W/[ ]m2 to 0.55 W/[ ]m2. The field distribution profile and photonic bandgap in this gyroscope have been analyzed using the finite-difference time-domain (FDTD) and plane-wave expansion (PWE) methods, respectively. Also, the gyroscope has a footprint of 163.5 [ ]m2.
- 12 December 2023
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
- Vol. 34 (03)
Designing an ultra-compact SOI waveguide with a high nonlinear coefficient for generating optical frequency combs and demultiplexing combs
In this paper, an ultra-compact high capability silicon-based waveguide with a high nonlinear coefficient and engineered dispersion was designed for frequency combs generation and demultiplexing of these combs. In the first part of the structure, a silicon waveguide with two zero-dispersion wavelengths, 1552[ ]nm and 2350[ ]nm, and a length of 4[ ]mm was used to generate optical frequency combs using the four-wave mixing method. Considering the high nonlinear coefficient of [ ] in the waveguide, an input pump power of 500[ ]mW was applied to the waveguide at near-zero-dispersion wavelengths of 1552[ ]nm. The output comb spectrum of the waveguide was obtained after the length of 4[ ]mm with a spectral bandwidth of 400[ ]nm and a free spectral range of 5[ ]nm. Additionally, by similar pumping at wavelengths of 1553[ ]nm and 1555[ ]nm to this waveguide, optical frequency combs with a free spectral range of 2[ ]nm and a spectral bandwidth of 150[ ]nm were obtained. In the second part of the structure, to isolate the optical frequency combs, the given waveguide was expanded to generate an SOI demultiplexer with micro-ring resonator filters, which could separate optical frequency combs with the wavelength of 1555[ ]nm, 1557[ ]nm, 1559[ ]nm, and 1561[ ]nm due to the selection of suitable values for the radius of the ring resonators. The mean transmission efficiency, spectral bandwidth, and quality factor were obtained to be 99.51%, 0.275[ ]nm, and 5675, respectively. The channel spacing in the proposed demultiplexer was 2[ ]nm and the minimum and maximum crosstalk were −36[ ]dB and −11.3[ ]dB.
- 12 December 2023
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
- Vol. 34 (03)
Designing an ultra-compact SOI waveguide with a high nonlinear coefficient for generating optical frequency combs and demultiplexing combs
In this paper, an ultra-compact high capability silicon-based waveguide with a high nonlinear coefficient and engineered dispersion was designed for frequency combs generation and demultiplexing of these combs. In the first part of the structure, a silicon waveguide with two zero-dispersion wavelengths, 1552[ ]nm and 2350[ ]nm, and a length of 4[ ]mm was used to generate optical frequency combs using the four-wave mixing method. Considering the high nonlinear coefficient of [ ] in the waveguide, an input pump power of 500[ ]mW was applied to the waveguide at near-zero-dispersion wavelengths of 1552[ ]nm. The output comb spectrum of the waveguide was obtained after the length of 4[ ]mm with a spectral bandwidth of 400[ ]nm and a free spectral range of 5[ ]nm. Additionally, by similar pumping at wavelengths of 1553[ ]nm and 1555[ ]nm to this waveguide, optical frequency combs with a free spectral range of 2[ ]nm and a spectral bandwidth of 150[ ]nm were obtained. In the second part of the structure, to isolate the optical frequency combs, the given waveguide was expanded to generate an SOI demultiplexer with micro-ring resonator filters, which could separate optical frequency combs with the wavelength of 1555[ ]nm, 1557[ ]nm, 1559[ ]nm, and 1561[ ]nm due to the selection of suitable values for the radius of the ring resonators. The mean transmission efficiency, spectral bandwidth, and quality factor were obtained to be 99.51%, 0.275[ ]nm, and 5675, respectively. The channel spacing in the proposed demultiplexer was 2[ ]nm and the minimum and maximum crosstalk were −36[ ]dB and −11.3[ ]dB.