Fernando H. Toledo
Research Subjects
Fernando H. Toledo has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- José Crossa
International Maize and Wheat Improvement Center (CIMMYT) Texcoco Mexico
6 shared publications - Juan Burgueño
International Maize and Wheat Improvement Centre (CIMMYT)
5 shared publications - Ana L. Gómez-Espejo
Programa de Doctorado en Recursos Fitogenéticos para Zonas Áridas, Universidad Autónoma Agraria Antonio Narro (UAAAN), Saltillo 25315, Mexico
2 shared publications - Bartolo de Jesús Villar-Hernández
International Maize and Wheat Improvement Center (CIMMYT) Estado de México México
2 shared publications - Carolina Sansaloni
International Maize and Wheat Improvement Center (CIMMYT), Texcoco 56237, Mexico
2 shared publications - Manuel Humberto Reyes Valdés
Universidad Autónoma Agraria Antonio Narro
2 shared publications
Latest Publications
- Open Access
- 8 March 2025
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 15 (4)
Improving wheat grain yield genomic prediction accuracy using historical data
Genomic selection is an essential tool to improve genetic gain in wheat breeding. This study aimed to enhance prediction accuracy for grain yield across various selection environments using CIMMYT's (International Maize and Wheat Improvement Center) historical dataset. Ten years of grain yield data from 6 selection environments were analyzed, with the populations of 5 years (2018–2023) as the validation population and earlier years (back to 2013–2014) as the training population. Generally, we observed that as the number of training years increased, the prediction accuracy tended to improve or stabilize. For instance, in the late heat stress selection environment (beds late heat stress), prediction accuracy increased from 0.11 (1 training year) to 0.23 (5 years), stabilizing at 0.26. Similar trends were observed in the intermediate drought selection environment (beds with 2 irrigations), with prediction accuracy rising from 0.12 (1 year) to 0.21 (4 years) but minimal improvement beyond that. Conversely, some selection environments, such as flat 5 irrigations (flat optimal environment), did not significantly increase, with the prediction accuracy fluctuating around 0.09–0.14 regardless of the number of training years used. Additionally, average genetic diversity within the training population and the validation population influenced prediction accuracy. Indeed, a negative correlation between prediction accuracy and the genetic distance was observed. This highlights the need to balance genetic diversity to enhance the predictive power of genomic selection models. These findings exhibit the benefits of using an extended historical dataset while considering genetic diversity to maximize prediction accuracy in genomic selection strategies for wheat breeding, ultimately supporting the development of high-yielding varieties.
- 8 March 2025
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 15 (4)
Open AccessImproving wheat grain yield genomic prediction accuracy using historical data
Genomic selection is an essential tool to improve genetic gain in wheat breeding. This study aimed to enhance prediction accuracy for grain yield across various selection environments using CIMMYT's (International Maize and Wheat Improvement Center) historical dataset. Ten years of grain yield data from 6 selection environments were analyzed, with the populations of 5 years (2018–2023) as the validation population and earlier years (back to 2013–2014) as the training population. Generally, we observed that as the number of training years increased, the prediction accuracy tended to improve or stabilize. For instance, in the late heat stress selection environment (beds late heat stress), prediction accuracy increased from 0.11 (1 training year) to 0.23 (5 years), stabilizing at 0.26. Similar trends were observed in the intermediate drought selection environment (beds with 2 irrigations), with prediction accuracy rising from 0.12 (1 year) to 0.21 (4 years) but minimal improvement beyond that. Conversely, some selection environments, such as flat 5 irrigations (flat optimal environment), did not significantly increase, with the prediction accuracy fluctuating around 0.09–0.14 regardless of the number of training years used. Additionally, average genetic diversity within the training population and the validation population influenced prediction accuracy. Indeed, a negative correlation between prediction accuracy and the genetic distance was observed. This highlights the need to balance genetic diversity to enhance the predictive power of genomic selection models. These findings exhibit the benefits of using an extended historical dataset while considering genetic diversity to maximize prediction accuracy in genomic selection strategies for wheat breeding, ultimately supporting the development of high-yielding varieties.
- Open Access
- 22 February 2024
- Published by Wiley in The Plant Genome
- Vol. 17 (2) , e20433
A Bayesian optimization R package for multitrait parental selection
Selecting and mating parents in conventional phenotypic and genomic selection are crucial. Plant breeding programs aim to improve the economic value of crops, considering multiple traits simultaneously. When traits are negatively correlated and/or when there are missing records in some traits, selection becomes more complex. To address this problem, we propose a multitrait selection approach using the Multitrait Parental Selection (MPS) R package—an efficient tool for genetic improvement, precision breeding, and conservation genetics. The package employs Bayesian optimization algorithms and three loss functions (Kullback–Leibler, Energy Score, and Multivariate Asymmetric Loss) to identify parental candidates with desirable traits. The software's functionality includes three main functions—EvalMPS, FastMPS, and ApproxMPS—catering to different data availability scenarios. Through the presented application examples, the MPS R package proves effective in multitrait genomic selection, enabling breeders to make informed decisions and achieve strong performance across multiple traits.
- 22 February 2024
- Published by Wiley in The Plant Genome
- Vol. 17 (2) , e20433
Open AccessA Bayesian optimization R package for multitrait parental selection
Selecting and mating parents in conventional phenotypic and genomic selection are crucial. Plant breeding programs aim to improve the economic value of crops, considering multiple traits simultaneously. When traits are negatively correlated and/or when there are missing records in some traits, selection becomes more complex. To address this problem, we propose a multitrait selection approach using the Multitrait Parental Selection (MPS) R package—an efficient tool for genetic improvement, precision breeding, and conservation genetics. The package employs Bayesian optimization algorithms and three loss functions (Kullback–Leibler, Energy Score, and Multivariate Asymmetric Loss) to identify parental candidates with desirable traits. The software's functionality includes three main functions—EvalMPS, FastMPS, and ApproxMPS—catering to different data availability scenarios. Through the presented application examples, the MPS R package proves effective in multitrait genomic selection, enabling breeders to make informed decisions and achieve strong performance across multiple traits.
- Open Access
Worldwide Selection Footprints for Drought and Heat in Bread Wheat (Triticum aestivum L.)
Genome–environment Associations (GEA) or Environmental Genome-Wide Association scans (EnvGWAS) have been poorly applied for studying the genomics of adaptive traits in bread wheat landraces (Triticum aestivum L.). We analyzed 990 landraces and seven climatic variables (mean temperature, maximum temperature, precipitation, precipitation seasonality, heat index of mean temperature, heat index of maximum temperature, and drought index) in GEA using the FarmCPU approach with GAPIT. Historical temperature and precipitation values were obtained as monthly averages from 1970 to 2000. Based on 26,064 high-quality SNP loci, landraces were classified into ten subpopulations exhibiting high genetic differentiation. The GEA identified 59 SNPs and nearly 89 protein-encoding genes involved in the response processes to abiotic stress. Genes related to biosynthesis and signaling are mainly mediated by auxins, abscisic acid (ABA), ethylene (ET), salicylic acid (SA), and jasmonates (JA), which are known to operate together in modulation responses to heat stress and drought in plants. In addition, we identified some proteins associated with the response and tolerance to stress by high temperatures, water deficit, and cell wall functions. The results provide candidate regions for selection aimed to improve drought and heat tolerance in bread wheat and provide insights into the genetic mechanisms involved in adaptation to extreme environments.
Open AccessWorldwide Selection Footprints for Drought and Heat in Bread Wheat (Triticum aestivum L.)
Genome–environment Associations (GEA) or Environmental Genome-Wide Association scans (EnvGWAS) have been poorly applied for studying the genomics of adaptive traits in bread wheat landraces (Triticum aestivum L.). We analyzed 990 landraces and seven climatic variables (mean temperature, maximum temperature, precipitation, precipitation seasonality, heat index of mean temperature, heat index of maximum temperature, and drought index) in GEA using the FarmCPU approach with GAPIT. Historical temperature and precipitation values were obtained as monthly averages from 1970 to 2000. Based on 26,064 high-quality SNP loci, landraces were classified into ten subpopulations exhibiting high genetic differentiation. The GEA identified 59 SNPs and nearly 89 protein-encoding genes involved in the response processes to abiotic stress. Genes related to biosynthesis and signaling are mainly mediated by auxins, abscisic acid (ABA), ethylene (ET), salicylic acid (SA), and jasmonates (JA), which are known to operate together in modulation responses to heat stress and drought in plants. In addition, we identified some proteins associated with the response and tolerance to stress by high temperatures, water deficit, and cell wall functions. The results provide candidate regions for selection aimed to improve drought and heat tolerance in bread wheat and provide insights into the genetic mechanisms involved in adaptation to extreme environments.
- Open Access
- 3 June 2022
- Published by Springer Nature
- p. 593-616
Theory and Practice of Phenotypic and Genomic Selection Indices
The plant net genetic merit is a linear combination of trait breeding values weighted by its respective economic weights whereas a linear selection index (LSI) is a linear combination of phenotypic or genomic estimated breeding values (GEBV) which is used to predict the net genetic merit of candidates for selection. Because economic values are difficult to assign, some authors developed economic weight-free LSI. The economic weights LSI are associated with linear regression theory, while the economic weight-free LSI is associated with canonical correlation theory. Both LSI can be unconstrained or constrained. Constrained LSI imposes restrictions on the expected genetic gain per trait to make some traits change their mean values based on a predetermined level, while the rest of the traits change their values without restriction. This work is geared towards plant breeders and researchers interested in LSI theory and practice in the context of wheat breeding. We provide the phenotypic and genomic unconstrained and constrained LSI, which together cover the theoretical and practical cornerstone of the single-stage LSI theory in plant breeding. Our main goal is to offer researchers a starting point for understanding the core tenets of LSI theory in plant selection.
- 3 June 2022
- Published by Springer Nature
- p. 593-616
Open AccessTheory and Practice of Phenotypic and Genomic Selection Indices
The plant net genetic merit is a linear combination of trait breeding values weighted by its respective economic weights whereas a linear selection index (LSI) is a linear combination of phenotypic or genomic estimated breeding values (GEBV) which is used to predict the net genetic merit of candidates for selection. Because economic values are difficult to assign, some authors developed economic weight-free LSI. The economic weights LSI are associated with linear regression theory, while the economic weight-free LSI is associated with canonical correlation theory. Both LSI can be unconstrained or constrained. Constrained LSI imposes restrictions on the expected genetic gain per trait to make some traits change their mean values based on a predetermined level, while the rest of the traits change their values without restriction. This work is geared towards plant breeders and researchers interested in LSI theory and practice in the context of wheat breeding. We provide the phenotypic and genomic unconstrained and constrained LSI, which together cover the theoretical and practical cornerstone of the single-stage LSI theory in plant breeding. Our main goal is to offer researchers a starting point for understanding the core tenets of LSI theory in plant selection.
- Open Access
- 21 June 2021
- Published by Universidad Juarez Autonoma de Tabasco in Ecosistemas y Recursos Agropecuarios
- Vol. 8 (2)
Asociación de genoma completo para el hábito de crecimiento en trigo harinero (Triticum aestivum L.)
El hábito de crecimiento de los trigos harineros (primavera e invierno) está determinado primordialmente por el proceso de vernalización, regulado por los genes Vrn. Algunos estudios sugieren la implicación de otros genes en la diferenciación de dicha característica. Por ello, se tiene por objetivo la identificación genómica de regiones con una posible relación funcional al hábito de crecimiento. Se realizó un estudio de asociación del genoma completo (GWAS) con dos enfoques de análisis: a) FarmCPU (Unificación de Probabilidad Circulante de Modelo fijo y aleatorio) y b) BLINK (Información Bayesiana y Desequilibrio de ligamiento Anidado Iterativamente) implementados en el paquete GAPIT de R. Se utilizaron datos de 25 681 loci de polimorfismo de un solo nucleótido (SNP’s) de 7 757 colectas de T. aestivum del banco de germoplasma del CIMMYT clasificadas en cuanto a su hábito de crecimiento. Se identificaron 593 marcadores SNP’s con una alta asociación al hábito de crecimiento (p < 0.01). Pero solo 70 marcadores formaban bloques de asociación (BA) en 11 cromosomas. Como se esperaba, se identificó un BA cercano al gen Vrn1 en el cromosoma 5A. Adicionalmente se identificaron 20 regiones genómicas (BA) con asociación al hábito de crecimiento, en las que se detectó la presencia de proteínas de respuesta al estrés implicadas en procesos de aclimatación y des-aclimatación. Los resultados sugieren la participación de nuevos genes en la determinación del hábito de crecimiento en Triticum aestivum y su potencial predictivo en colectas no clasificadas.
- 21 June 2021
- Published by Universidad Juarez Autonoma de Tabasco in Ecosistemas y Recursos Agropecuarios
- Vol. 8 (2)
Open AccessAsociación de genoma completo para el hábito de crecimiento en trigo harinero (Triticum aestivum L.)
El hábito de crecimiento de los trigos harineros (primavera e invierno) está determinado primordialmente por el proceso de vernalización, regulado por los genes Vrn. Algunos estudios sugieren la implicación de otros genes en la diferenciación de dicha característica. Por ello, se tiene por objetivo la identificación genómica de regiones con una posible relación funcional al hábito de crecimiento. Se realizó un estudio de asociación del genoma completo (GWAS) con dos enfoques de análisis: a) FarmCPU (Unificación de Probabilidad Circulante de Modelo fijo y aleatorio) y b) BLINK (Información Bayesiana y Desequilibrio de ligamiento Anidado Iterativamente) implementados en el paquete GAPIT de R. Se utilizaron datos de 25 681 loci de polimorfismo de un solo nucleótido (SNP’s) de 7 757 colectas de T. aestivum del banco de germoplasma del CIMMYT clasificadas en cuanto a su hábito de crecimiento. Se identificaron 593 marcadores SNP’s con una alta asociación al hábito de crecimiento (p < 0.01). Pero solo 70 marcadores formaban bloques de asociación (BA) en 11 cromosomas. Como se esperaba, se identificó un BA cercano al gen Vrn1 en el cromosoma 5A. Adicionalmente se identificaron 20 regiones genómicas (BA) con asociación al hábito de crecimiento, en las que se detectó la presencia de proteínas de respuesta al estrés implicadas en procesos de aclimatación y des-aclimatación. Los resultados sugieren la participación de nuevos genes en la determinación del hábito de crecimiento en Triticum aestivum y su potencial predictivo en colectas no clasificadas.
- Open Access
- 20 January 2021
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 11 (2)
Application of multi-trait Bayesian decision theory for parental genomic selection
In all breeding programs, the decision about which individuals to select and intermate to form the next selection cycle is crucial. The improvement of genetic stocks requires considering multiple traits simultaneously, given that economic value and net genetic merits depend on many traits; therefore, with the advance of computational and statistical tools and genomic selection (GS), researchers are focusing on multi-trait selection. Selection of the best individuals is difficult, especially in traits that are antagonistically correlated, where improvement in one trait might imply a reduction in other(s). There are approaches that facilitate multi-trait selection, and recently a Bayesian decision theory (BDT) has been proposed. Parental selection using BDT has the potential to be effective in multi-trait selection given that it summarizes all relevant quantitative genetic concepts such as heritability, response to selection and the structure of dependence between traits (correlation). In this study, we applied BDT to provide a treatment for the complexity of multi-trait parental selection using three multivariate loss functions (LF), Kullback–Leibler (KL), Energy Score, and Multivariate Asymmetric Loss (MALF), to select the best-performing parents for the next breeding cycle in two extensive real wheat data sets. Results show that the high ranking lines in genomic estimated breeding value (GEBV) for certain traits did not always have low values for the posterior expected loss (PEL). For both data sets, the KL LF gave similar importance to all traits including grain yield. In contrast, the Energy Score and MALF gave a better performance in three of four traits that were different than grain yield. The BDT approach should help breeders to decide based not only on the GEBV per se of the parent to be selected, but also on the level of uncertainty according to the Bayesian paradigm.
- 20 January 2021
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 11 (2)
Open AccessApplication of multi-trait Bayesian decision theory for parental genomic selection
In all breeding programs, the decision about which individuals to select and intermate to form the next selection cycle is crucial. The improvement of genetic stocks requires considering multiple traits simultaneously, given that economic value and net genetic merits depend on many traits; therefore, with the advance of computational and statistical tools and genomic selection (GS), researchers are focusing on multi-trait selection. Selection of the best individuals is difficult, especially in traits that are antagonistically correlated, where improvement in one trait might imply a reduction in other(s). There are approaches that facilitate multi-trait selection, and recently a Bayesian decision theory (BDT) has been proposed. Parental selection using BDT has the potential to be effective in multi-trait selection given that it summarizes all relevant quantitative genetic concepts such as heritability, response to selection and the structure of dependence between traits (correlation). In this study, we applied BDT to provide a treatment for the complexity of multi-trait parental selection using three multivariate loss functions (LF), Kullback–Leibler (KL), Energy Score, and Multivariate Asymmetric Loss (MALF), to select the best-performing parents for the next breeding cycle in two extensive real wheat data sets. Results show that the high ranking lines in genomic estimated breeding value (GEBV) for certain traits did not always have low values for the posterior expected loss (PEL). For both data sets, the KL LF gave similar importance to all traits including grain yield. In contrast, the Energy Score and MALF gave a better performance in three of four traits that were different than grain yield. The BDT approach should help breeders to decide based not only on the GEBV per se of the parent to be selected, but also on the level of uncertainty according to the Bayesian paradigm.
- Open Access
- 15 July 2020
- Published by Wiley in The Plant Genome
- Vol. 13 (3) , e20033
On Hadamard and Kronecker products in covariance structures for genotype × environment interaction
When including genotype × environment interactions (G × E) in genomic prediction models, Hadamard or Kronecker products have been used to model the covariance structure of interactions. The relation between these two types of modeling has not been made clear in genomic prediction literature. Here, we demonstrate that a certain model based on a Hadamard formulation and another using the Kronecker product lead to exactly the same statistical model. Moreover, we illustrate how a multiplication of entries of covariance matrices is related to modeling locus × environmental‐variable interactions explicitly. Finally, we use a wheat and a maize data set to illustrate that the environmental covariance E can be specified easily, also if no information on environmental variables – such as temperature or precipitation – is available. Given that lines have been tested in different environments, the corresponding environmental covariance can simply be estimated from the training set as phenotypic covariance between environments. To achieve a high level of increase in predictive ability, the environmental covariance has to be defined appropriately and records on the performance of the lines of the test set under different environmental conditions have to be included in the training set.
- 15 July 2020
- Published by Wiley in The Plant Genome
- Vol. 13 (3) , e20033
Open AccessOn Hadamard and Kronecker products in covariance structures for genotype × environment interaction
When including genotype × environment interactions (G × E) in genomic prediction models, Hadamard or Kronecker products have been used to model the covariance structure of interactions. The relation between these two types of modeling has not been made clear in genomic prediction literature. Here, we demonstrate that a certain model based on a Hadamard formulation and another using the Kronecker product lead to exactly the same statistical model. Moreover, we illustrate how a multiplication of entries of covariance matrices is related to modeling locus × environmental‐variable interactions explicitly. Finally, we use a wheat and a maize data set to illustrate that the environmental covariance E can be specified easily, also if no information on environmental variables – such as temperature or precipitation – is available. Given that lines have been tested in different environments, the corresponding environmental covariance can simply be estimated from the training set as phenotypic covariance between environments. To achieve a high level of increase in predictive ability, the environmental covariance has to be defined appropriately and records on the performance of the lines of the test set under different environmental conditions have to be included in the training set.
- Open Access
Hybrid Breeding for MLN Resistance: Heterosis, Combining Ability, and Hybrid Prediction
Prior knowledge on heterosis and quantitative genetic parameters on maize lethal necrosis (MLN) can help the breeders to develop numerous resistant or tolerant hybrids with optimum resources. Our objectives were to (1) estimate the quantitative genetic parameters for MLN disease severity, (2) investigate the efficiency of the prediction of hybrid performance based on parental per se and general combining ability (GCA) effects, and (3) examine the potential of hybrid prediction for MLN resistance or tolerance based on markers. Fifty elite maize inbred lines were selected based on their response to MLN under artificial inoculation. Crosses were made in a half diallel mating design to produce 307 F1 hybrids. All hybrids were evaluated in MLN quarantine facility in Naivasha, Kenya for two seasons under artificial inoculation. All 50 inbreds were genotyped with genotyping-by-sequencing (GBS) SNPs. The phenotypic variation was significant for all traits and the heritability was moderate to high. We observed that hybrids were superior to the mean performance of the parents for disease severity (−14.57%) and area under disease progress curve (AUDPC) (14.9%). Correlations were significant and moderate between line per se and GCA; and mean of parental value with hybrid performance for both disease severity and AUDPC value. Very low and negative correlation was observed between parental lines marker based genetic distance and heterosis. Nevertheless, the correlation of GCA effects was very high with hybrid performance which can suggests as a good predictor of MLN resistance. Genomic prediction of hybrid performance for MLN is high for both traits. We therefore conclude that there is potential for prediction of hybrid performance for MLN. Overall, the estimated quantitative genetic parameters suggest that through targeted approach, it is possible to develop outstanding lines and hybrids for MLN resistance.
Open AccessHybrid Breeding for MLN Resistance: Heterosis, Combining Ability, and Hybrid Prediction
Prior knowledge on heterosis and quantitative genetic parameters on maize lethal necrosis (MLN) can help the breeders to develop numerous resistant or tolerant hybrids with optimum resources. Our objectives were to (1) estimate the quantitative genetic parameters for MLN disease severity, (2) investigate the efficiency of the prediction of hybrid performance based on parental per se and general combining ability (GCA) effects, and (3) examine the potential of hybrid prediction for MLN resistance or tolerance based on markers. Fifty elite maize inbred lines were selected based on their response to MLN under artificial inoculation. Crosses were made in a half diallel mating design to produce 307 F1 hybrids. All hybrids were evaluated in MLN quarantine facility in Naivasha, Kenya for two seasons under artificial inoculation. All 50 inbreds were genotyped with genotyping-by-sequencing (GBS) SNPs. The phenotypic variation was significant for all traits and the heritability was moderate to high. We observed that hybrids were superior to the mean performance of the parents for disease severity (−14.57%) and area under disease progress curve (AUDPC) (14.9%). Correlations were significant and moderate between line per se and GCA; and mean of parental value with hybrid performance for both disease severity and AUDPC value. Very low and negative correlation was observed between parental lines marker based genetic distance and heterosis. Nevertheless, the correlation of GCA effects was very high with hybrid performance which can suggests as a good predictor of MLN resistance. Genomic prediction of hybrid performance for MLN is high for both traits. We therefore conclude that there is potential for prediction of hybrid performance for MLN. Overall, the estimated quantitative genetic parameters suggest that through targeted approach, it is possible to develop outstanding lines and hybrids for MLN resistance.
- Open Access
- 1 August 2019
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 9 (8) , 2425-2428
isqg: A Binary Framework forin SilicoQuantitative Genetics
The dna is the fundamental basis of genetic information, just as bits are for computers. Whenever computers are used to represent genetic data, the computational encoding must be efficient to allow the representation of processes driving the inheritance and variability. This is especially important across simulations in view of the increasing complexity and dimensions brought by genomics. This paper introduces a new binary representation of genetic information. Algorithms as bitwise operations that mimic the inheritance of a wide range of polymorphisms are also presented. Different kinds and mixtures of polymorphisms are discussed and exemplified. Proposed algorithms and data structures were implemented in C++ programming language and is available to end users in the R package “isqg” which is available at the R repository (cran). Supplementary data are available online.
- 1 August 2019
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 9 (8) , 2425-2428
Open Accessisqg: A Binary Framework forin SilicoQuantitative Genetics
The dna is the fundamental basis of genetic information, just as bits are for computers. Whenever computers are used to represent genetic data, the computational encoding must be efficient to allow the representation of processes driving the inheritance and variability. This is especially important across simulations in view of the increasing complexity and dimensions brought by genomics. This paper introduces a new binary representation of genetic information. Algorithms as bitwise operations that mimic the inheritance of a wide range of polymorphisms are also presented. Different kinds and mixtures of polymorphisms are discussed and exemplified. Proposed algorithms and data structures were implemented in C++ programming language and is available to end users in the R package “isqg” which is available at the R repository (cran). Supplementary data are available online.
- Open Access
- 27 September 2018
- Published by Springer Nature
- p. 231-241
Stochastic Simulation of Four Linear Phenotypic Selection Indices
- 27 September 2018
- Published by Springer Nature
- p. 231-241
Open AccessStochastic Simulation of Four Linear Phenotypic Selection Indices