Grégory Gadret
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Grégory Gadret has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Pierre Mathey
Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 6303 CNRS-UBFC, 9 av. Alain Savary, BP 47870, 21078 Dijon, France
3 shared publications - Frederic Smektala
UMR 6303 CNRS-Université de Bourgogne Franche-Comté
2 shared publications - Frédéric Désévédavy
Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS-Université Bourgogne Franche-Comté 1 , Avenue Alain Savary, 21000 Dijon
2 shared publications - Jean-Charles Jules
Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS-Université de Bourgogne Franche-Comté, Avenue Alain Savary, 21000 Dijon, France
2 shared publications - Konstantin Shcherbin
National Academy of Sciences
2 shared publications - Pierre Mathey
Centre National de la Recherche Scientifique
2 shared publications
Latest Publications
- Open Access
Physicochemical Properties and Fiber-Drawing Ability of Tellurite Glasses in the TeO2-ZnO-Y2O3 Ternary System
Glasses in the TeO2-ZnO-Y2O3 (TZY) ternary system are examined in the present work. The vitrification domain of the chosen oxide matrix is determined and differential scanning calorimetry as well as X-ray diffraction measurements are carried out. The material characterizations reveal that Y2O3 incorporation cannot exceed 5 mol.% without causing detrimental crystallization within the glass. Optical transmission and refractive index investigations are conducted on compositions yielding fully amorphous samples. Next, the fiber drawing ability of selected yttrium-containing zinc-tellurite glasses is assessed and fiber-attenuation measurements in the mid-infrared are presented. Finally, a multimode step-index fiber is fabricated by combining a TZY cladding glass with a La2O3-based tellurite core glass. It is believed that yttrium-containing glasses could prove useful in association with other high glass transition temperature (>300 °C) TeO2-based materials for the design of robust optical fibers with precisely engineered refractive index profiles.
Open AccessPhysicochemical Properties and Fiber-Drawing Ability of Tellurite Glasses in the TeO2-ZnO-Y2O3 Ternary System
Glasses in the TeO2-ZnO-Y2O3 (TZY) ternary system are examined in the present work. The vitrification domain of the chosen oxide matrix is determined and differential scanning calorimetry as well as X-ray diffraction measurements are carried out. The material characterizations reveal that Y2O3 incorporation cannot exceed 5 mol.% without causing detrimental crystallization within the glass. Optical transmission and refractive index investigations are conducted on compositions yielding fully amorphous samples. Next, the fiber drawing ability of selected yttrium-containing zinc-tellurite glasses is assessed and fiber-attenuation measurements in the mid-infrared are presented. Finally, a multimode step-index fiber is fabricated by combining a TZY cladding glass with a La2O3-based tellurite core glass. It is believed that yttrium-containing glasses could prove useful in association with other high glass transition temperature (>300 °C) TeO2-based materials for the design of robust optical fibers with precisely engineered refractive index profiles.
- Open Access
- 11 October 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (10) , 1875
Dispersion-Engineered Step-Index Tellurite Fibers for Mid-Infrared Coherent Supercontinuum Generation from 1.5 to 4.5 μm with Sub-Nanojoule Femtosecond Pump Pulses
Mid-infrared supercontinuum generation from 1.5 to 4.5 µm with sub-nanojoule femtosecond pump pulses is demonstrated by using a short segment of dispersion-engineered step-index tellurite fiber with very low OH content. Distinct group-velocity dispersion regimes in a simple design of step-index tellurite fiber are also reported, which allows to choose the nonlinear pulse propagation regime according to the required tailoring of the supercontinuum source. Numerical simulations based on the generalized nonlinear Schrödinger equation are used to determine optimized fiber parameters before experimental demonstrations. We also analyse the coherence properties of the resulting supercontinuum sources.
- 11 October 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (10) , 1875
Open AccessDispersion-Engineered Step-Index Tellurite Fibers for Mid-Infrared Coherent Supercontinuum Generation from 1.5 to 4.5 μm with Sub-Nanojoule Femtosecond Pump Pulses
Mid-infrared supercontinuum generation from 1.5 to 4.5 µm with sub-nanojoule femtosecond pump pulses is demonstrated by using a short segment of dispersion-engineered step-index tellurite fiber with very low OH content. Distinct group-velocity dispersion regimes in a simple design of step-index tellurite fiber are also reported, which allows to choose the nonlinear pulse propagation regime according to the required tailoring of the supercontinuum source. Numerical simulations based on the generalized nonlinear Schrödinger equation are used to determine optimized fiber parameters before experimental demonstrations. We also analyse the coherence properties of the resulting supercontinuum sources.
- 26 November 2015
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 32 (12) , 2536-2547
Slowing down of light pulses using backward-wave four-wave mixing with local response
The slowing down of light pulses is achieved using backward-wave four-wave mixing in a medium with local response. A crystal with an external dc field is used in the experiment as a proof-of-concept material. The delay and shape transformation of output pulses are studied and compared for the transmitted and phase conjugate channels. It is shown that the phase conjugate pulse achieves a longer delay under typical experimental conditions with equal intensities of the pump beams. This advantage of the phase conjugate beam is especially pronounced for short pulses with half-widths smaller than the response time of the medium. The agreement of the experimental results with numerical calculations confirms the validity of the previously developed theoretical model. Analytical solutions are derived for input pulses with triangular shapes.- 26 November 2015
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 32 (12) , 2536-2547
Slowing down of light pulses using backward-wave four-wave mixing with local response
The slowing down of light pulses is achieved using backward-wave four-wave mixing in a medium with local response. A crystal with an external dc field is used in the experiment as a proof-of-concept material. The delay and shape transformation of output pulses are studied and compared for the transmitted and phase conjugate channels. It is shown that the phase conjugate pulse achieves a longer delay under typical experimental conditions with equal intensities of the pump beams. This advantage of the phase conjugate beam is especially pronounced for short pulses with half-widths smaller than the response time of the medium. The agreement of the experimental results with numerical calculations confirms the validity of the previously developed theoretical model. Analytical solutions are derived for input pulses with triangular shapes.- 8 April 2014
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 31 (5) , 980-986
Manipulation of fast light using photorefractive beam fanning
Light pulse group velocity manipulations due to the specific dispersion of a medium (so-called “slow” and “fast” light phenomena) can be obtained on the basis of several mechanisms. One of these techniques is two-wave mixing in a photorefractive crystal. This work presents a modification of this method, exploiting the strong beam fanning in Sb-doped Sn2P2S6 crystals. Our experimental results demonstrate a “fast light” behavior of Gaussian pulses transmitted through a Sn2P2S6:Sb sample. The phenomenon is due to the beam fanning (i.e., the self-diffraction of the incident beam on self-induced noisy photorefractive gratings) that ensures a significant depletion of the input beam. Due to the relatively fast photorefractive response of the Sn2P2S6:Sb crystals this depletion occurs with times in the range of 10–100 ms, depending on the beam intensity, and the “fast light” feature is observed. The temporal and amplitude characteristics of the output beam are measured in function of the intensity and polarization azimuth of the incident beam. Besides, a negative phase shift of the periodical output beam relative to a sinusoidal intensity-modulated input beam is also obtained experimentally. It is shown that the phase and amplitude relation between the input and output periodic signals are described by a simple analytical expression that takes into account the beam fanning strength (depletion factor) and its dynamics (depletion time constant). It is also demonstrated that the pulse advance (or phase shift of the modulated signal) can be regulated by the light polarization azimuth. The advantages of the proposed method are discussed.
- 8 April 2014
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 31 (5) , 980-986
Manipulation of fast light using photorefractive beam fanning
Light pulse group velocity manipulations due to the specific dispersion of a medium (so-called “slow” and “fast” light phenomena) can be obtained on the basis of several mechanisms. One of these techniques is two-wave mixing in a photorefractive crystal. This work presents a modification of this method, exploiting the strong beam fanning in Sb-doped Sn2P2S6 crystals. Our experimental results demonstrate a “fast light” behavior of Gaussian pulses transmitted through a Sn2P2S6:Sb sample. The phenomenon is due to the beam fanning (i.e., the self-diffraction of the incident beam on self-induced noisy photorefractive gratings) that ensures a significant depletion of the input beam. Due to the relatively fast photorefractive response of the Sn2P2S6:Sb crystals this depletion occurs with times in the range of 10–100 ms, depending on the beam intensity, and the “fast light” feature is observed. The temporal and amplitude characteristics of the output beam are measured in function of the intensity and polarization azimuth of the incident beam. Besides, a negative phase shift of the periodical output beam relative to a sinusoidal intensity-modulated input beam is also obtained experimentally. It is shown that the phase and amplitude relation between the input and output periodic signals are described by a simple analytical expression that takes into account the beam fanning strength (depletion factor) and its dynamics (depletion time constant). It is also demonstrated that the pulse advance (or phase shift of the modulated signal) can be regulated by the light polarization azimuth. The advantages of the proposed method are discussed.
- 1 December 2011
- Published by American Physical Society (APS) in Physical Review A
- Vol. 84 (6)
Slow light with photorefractive four-wave mixing
A slowing down of light pulses using backward-wave four-wave mixing is achieved in photorefractive crystals with different coupling strength. The delay and width of the output pulse are studied as a function of the input pulse width and pump intensity ratio for the amplified transmitted beam and for the phase-conjugated beam. The delay characteristics are compared with those of the two-beam coupling. It is demonstrated that the four-wave mixing process ensures a larger slowing down of short pulses (pulses with width shorter than the photorefractive response time) as compared to the photorefractive two-beam coupling scheme and guarantees the elimination of forerunners. The delay of long pulses in the four-wave mixing configuration is almost the same as the one that can be reached with two-beam coupling. The effect of absorption on the nonlinear shape transformation of the output pulses is discussed qualitatively.
- 1 December 2011
- Published by American Physical Society (APS) in Physical Review A
- Vol. 84 (6)
Slow light with photorefractive four-wave mixing
A slowing down of light pulses using backward-wave four-wave mixing is achieved in photorefractive crystals with different coupling strength. The delay and width of the output pulse are studied as a function of the input pulse width and pump intensity ratio for the amplified transmitted beam and for the phase-conjugated beam. The delay characteristics are compared with those of the two-beam coupling. It is demonstrated that the four-wave mixing process ensures a larger slowing down of short pulses (pulses with width shorter than the photorefractive response time) as compared to the photorefractive two-beam coupling scheme and guarantees the elimination of forerunners. The delay of long pulses in the four-wave mixing configuration is almost the same as the one that can be reached with two-beam coupling. The effect of absorption on the nonlinear shape transformation of the output pulses is discussed qualitatively.
- 24 June 2010
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 27 (7) , 1481-1486
Absolute instability in backward wave four-wave mixing: spatial effects
The spatial distribution of new beams generated above the threshold of absolute instability of two counterpropagating incoherent light waves is studied and compared with the results of calculation.
- 24 June 2010
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 27 (7) , 1481-1486
Absolute instability in backward wave four-wave mixing: spatial effects
The spatial distribution of new beams generated above the threshold of absolute instability of two counterpropagating incoherent light waves is studied and compared with the results of calculation.