Aleksandar Krastev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Aleksandar Krastev has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Ivan Chavdarov
Department of Mechatronics, Robotics and Mechanics, Faculty of Mathematics and Informatics, University of Sofia “St. Kliment Ohridski”, 5 James Bourchier Blvd., 1164 Sofia, Bulgaria
4 shared publications - Maya Dimitrova
Bulgarian Academy of Sciences
4 shared publications - Anastas Madzharov
Unmanned Robotics Systems Laboratory, Institute of Robotics, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria
1 shared publication - Anna Lekova
Institute of Robotics, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria
1 shared publication Bozhidar Naydenov
Institute of Robotics, Bulgarian Academy of Sciences, Sofia, Bulgaria
1 shared publicationElena-Blagoeva Hasarbassanova
1 shared publication
Latest Publications
- Open Access
- 3 April 2024
- Published by MDPI AG in Preprints.org
Psychophysics of Social Cyber-Physical System Acceptance
A review of literature, supporting the view on the psychophysical origins of some acceptance effects of cyber-physical systems (CPSs), is presented and discussed in the paper. Psychological effects like the reactance to a robot or the uncanny valley phenomenon suggest that CPSs are perceived as a special type of ‘being’, a phylogenetically emergent category, or a novel ontology in a philosophical sense, culturally developing as a function of the social brain. Justification of this view is provided by the psychophysically-relevant human responses to technologically and socially ambiguous stimuli on the one hand, and the probabilistic independence of the proposed ontology to similar ontologies, subjectively experienced by the human, on the other. The results of the presented in the paper analysis demonstrate the feasibility of the proposed hypothesis of ontological ‘near independence’ of the distribution of the probabilistic psychophysical processes in response to the cyber-physical stimulus as a socially evolving phenomenon.
- 3 April 2024
- Published by MDPI AG in Preprints.org
Open AccessPsychophysics of Social Cyber-Physical System Acceptance
A review of literature, supporting the view on the psychophysical origins of some acceptance effects of cyber-physical systems (CPSs), is presented and discussed in the paper. Psychological effects like the reactance to a robot or the uncanny valley phenomenon suggest that CPSs are perceived as a special type of ‘being’, a phylogenetically emergent category, or a novel ontology in a philosophical sense, culturally developing as a function of the social brain. Justification of this view is provided by the psychophysically-relevant human responses to technologically and socially ambiguous stimuli on the one hand, and the probabilistic independence of the proposed ontology to similar ontologies, subjectively experienced by the human, on the other. The results of the presented in the paper analysis demonstrate the feasibility of the proposed hypothesis of ontological ‘near independence’ of the distribution of the probabilistic psychophysical processes in response to the cyber-physical stimulus as a socially evolving phenomenon.
- Open Access
- 10 June 2022
- Published by Institute of Mathematics and Informatics Bulgarian Academy of Sciences in Innovative STEM Education
- Vol. 4 (1) , 24-31
Aspects of the Intrinsic Motivation as Accessibility Factors in the Inclusive "STEAM" Education
The paper presents the current development of the proposed by the authors approach to defining digital and e-learning accessibility for effective pedagogical rehabilitation of learners with special learning needs. A novel aspect – intrinsic accessibility – is proposed as complementary to the previously identified extrinsic aspects of accessibility – institutional, informational and cultural. The intrinsic aspects of accessibility – lack of skills, knowledge, or motivation – influence the process of pedagogical rehabilitation of children with special learning needs. Two different pedagogical scenarios implementing educational robots are discussed in a STEAM context.
- 10 June 2022
- Published by Institute of Mathematics and Informatics Bulgarian Academy of Sciences in Innovative STEM Education
- Vol. 4 (1) , 24-31
Open AccessAspects of the Intrinsic Motivation as Accessibility Factors in the Inclusive "STEAM" Education
The paper presents the current development of the proposed by the authors approach to defining digital and e-learning accessibility for effective pedagogical rehabilitation of learners with special learning needs. A novel aspect – intrinsic accessibility – is proposed as complementary to the previously identified extrinsic aspects of accessibility – institutional, informational and cultural. The intrinsic aspects of accessibility – lack of skills, knowledge, or motivation – influence the process of pedagogical rehabilitation of children with special learning needs. Two different pedagogical scenarios implementing educational robots are discussed in a STEAM context.
- Open Access
- 29 June 2021
- Published by Institute of Mathematics and Informatics Bulgarian Academy of Sciences in Innovative STEM Education
- Vol. 3 (1) , 57-63
Cognitive Aspects of Cyber-Physical Systems for Pedagogical Rehabilitation: Towards a "STEAM" Approach to Inclusive Education
The paper presents the main ideas, motivating two ongoing research projects, justifying the need to move to STEAM education. The proposed novel type of cyber-physical systems - for pedagogical rehabilitation in inclusive education - is outlined. The role of puppet theatre in maximising the learning outcomes in inclusive education is substantiated. It has been also shown that integrating game, puppet theatre and social robotics is beneficiary in the classroom. Social robots have a significant potential for transition of the cognitive analysis of the behaviour of humans and robots from the physical to the social level. This is the core of the proposed in the paper approach for the STEAM education of the future.
- 29 June 2021
- Published by Institute of Mathematics and Informatics Bulgarian Academy of Sciences in Innovative STEM Education
- Vol. 3 (1) , 57-63
Open AccessCognitive Aspects of Cyber-Physical Systems for Pedagogical Rehabilitation: Towards a "STEAM" Approach to Inclusive Education
The paper presents the main ideas, motivating two ongoing research projects, justifying the need to move to STEAM education. The proposed novel type of cyber-physical systems - for pedagogical rehabilitation in inclusive education - is outlined. The role of puppet theatre in maximising the learning outcomes in inclusive education is substantiated. It has been also shown that integrating game, puppet theatre and social robotics is beneficiary in the classroom. Social robots have a significant potential for transition of the cognitive analysis of the behaviour of humans and robots from the physical to the social level. This is the core of the proposed in the paper approach for the STEAM education of the future.
- Open Access
- 1 May 2020
- Published by SAGE Publications in International Journal of Advanced Robotic Systems
- Vol. 17 (3)
Analysis and experiments with a 3D printed walking robot to improve climbing obstacle
The purpose of this work is to investigate the possibilities of climbing higher obstacles while maintaining the overall dimensions of a walking robot through design improvements and experiments. An original concept for the design of a walking robot with a minimum number of motors is presented. Geometric and force constraints for overcoming an obstacle and the conditions for maintaining static stability are determined. Experiments for overcoming a vertical obstacle are conducted with a 3D printed model. The 3D printed robot feet with different shapes and materials are used. The results of the experiments are presented graphically as a percentage of success against a baseline model. In this study, a dimensionless index to compare the height of the overcome obstacle and the dimensions of the robot is introduced. It allows to objectively compare the possibilities of overcoming obstacles between various types of mobile robots. Conclusions and guidelines for design improvements are made.
- 1 May 2020
- Published by SAGE Publications in International Journal of Advanced Robotic Systems
- Vol. 17 (3)
Open AccessAnalysis and experiments with a 3D printed walking robot to improve climbing obstacle
The purpose of this work is to investigate the possibilities of climbing higher obstacles while maintaining the overall dimensions of a walking robot through design improvements and experiments. An original concept for the design of a walking robot with a minimum number of motors is presented. Geometric and force constraints for overcoming an obstacle and the conditions for maintaining static stability are determined. Experiments for overcoming a vertical obstacle are conducted with a 3D printed model. The 3D printed robot feet with different shapes and materials are used. The results of the experiments are presented graphically as a percentage of success against a baseline model. In this study, a dimensionless index to compare the height of the overcome obstacle and the dimensions of the robot is introduced. It allows to objectively compare the possibilities of overcoming obstacles between various types of mobile robots. Conclusions and guidelines for design improvements are made.
- Open Access
- 1 December 2017
- Published by Walter de Gruyter GmbH in Information Technologies and Control
- Vol. 15 (4) , 16-19
Interaction of a Humanoid Robot Nao with a Non-Humanoid Walking Robot
The paper considers a novel algorithm for performing joint tasks between a humanoid robot NAO and a low-budget (Low-Cost) walking robot Big Foot. The specific construction of Big Foot allows movement by walking, change of direction and overcoming obstacles by using only two engines. The principle of movement of Big Foot is presented and the parameters, which determine the step and velocity of movement, are discussed. NAO robot sets the beginning of task execution and controls reaching the target position by the non-humanoid robot. NAO sonars are employed for this purpose. The non-humanoid robot Big Foot is controlled remotely by a human. The information on the timing of the executed movements and the reaching of the target is collected in several ways by using the sensors of NAO and Big Foot. The obtained results are analysed. Possibilities for application of the proposed algorithm are discussed.
- 1 December 2017
- Published by Walter de Gruyter GmbH in Information Technologies and Control
- Vol. 15 (4) , 16-19
Open AccessInteraction of a Humanoid Robot Nao with a Non-Humanoid Walking Robot
The paper considers a novel algorithm for performing joint tasks between a humanoid robot NAO and a low-budget (Low-Cost) walking robot Big Foot. The specific construction of Big Foot allows movement by walking, change of direction and overcoming obstacles by using only two engines. The principle of movement of Big Foot is presented and the parameters, which determine the step and velocity of movement, are discussed. NAO robot sets the beginning of task execution and controls reaching the target position by the non-humanoid robot. NAO sonars are employed for this purpose. The non-humanoid robot Big Foot is controlled remotely by a human. The information on the timing of the executed movements and the reaching of the target is collected in several ways by using the sensors of NAO and Big Foot. The obtained results are analysed. Possibilities for application of the proposed algorithm are discussed.
- Open Access
- 1 June 2017
- Published by Walter de Gruyter GmbH in Information Technologies and Control
- Vol. 15 (2) , 14-24
Wireless Kinect-NAO Framework Based on Takagi-Sugeno Fuzzy Inference System
In the context of learning new skills by imitation for children with special educational needs, we propose Wireless Kinect-NAO Framework (WKNF) for robot teleoperation in real time based on Takagi-Sugeno (T-S) Fuzzy Inference System. The new solutions here are related to complex whole-body motion retargeting, standing body stabilization, view invariance and smoothness of robot motions. The raw depth Kinect data are fuzzified and processed by median filter. The joint angles estimation for motion mapping of Human to NAO movements is based on fuzzy logic and featured angles rather than direct angles are calculated by Inverse Kinematics due to differences in the human and robot kinematics. During the joint angles calculation nonlinearities are observed as a result of ambiguity of Kinect 3D joint coordinates in different offsets. NAO kinematic limitations and nonlinearities in workspace are decomposed and linearly approximated by T-S fuzzy rules of zero and first order that have local support in 2D projections. To prevent the robot to fall down, the center of mass is considered in order NAO to stay within a support and safe polygon. The feasibility of the proposed framework has been proven by real experiments.
- 1 June 2017
- Published by Walter de Gruyter GmbH in Information Technologies and Control
- Vol. 15 (2) , 14-24
Open AccessWireless Kinect-NAO Framework Based on Takagi-Sugeno Fuzzy Inference System
In the context of learning new skills by imitation for children with special educational needs, we propose Wireless Kinect-NAO Framework (WKNF) for robot teleoperation in real time based on Takagi-Sugeno (T-S) Fuzzy Inference System. The new solutions here are related to complex whole-body motion retargeting, standing body stabilization, view invariance and smoothness of robot motions. The raw depth Kinect data are fuzzified and processed by median filter. The joint angles estimation for motion mapping of Human to NAO movements is based on fuzzy logic and featured angles rather than direct angles are calculated by Inverse Kinematics due to differences in the human and robot kinematics. During the joint angles calculation nonlinearities are observed as a result of ambiguity of Kinect 3D joint coordinates in different offsets. NAO kinematic limitations and nonlinearities in workspace are decomposed and linearly approximated by T-S fuzzy rules of zero and first order that have local support in 2D projections. To prevent the robot to fall down, the center of mass is considered in order NAO to stay within a support and safe polygon. The feasibility of the proposed framework has been proven by real experiments.