PHPablo Heresi

Pablo Heresi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pablo Heresi has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ground-Motion Intensity in Caraballeda During the 24 June 2026 Mw 7.5 Venezuela Earthquake Estimated from CCTV Video

    by José Bustos, Nathan Girmay, Miguel Bravo-Haro, Rodrigo Rojas, Diego Montemayor, Pablo Heresi, Eduardo Miranda, Francisco Pinto, Gonzalo Montalva, Nicolás Bastías, et al.

    The 24 June 2026 Mw 7.5 Venezuela earthquake caused massive damage in Caraballeda, on the northern coast of Venezuela. No strong-motion records were obtained in the city or anywhere else within 10 km of the rupture. We estimate the time history and intensity of the ground-motion pulse that struck Caraballeda from two closed-circuit television (CCTV) recordings, tracking the frictional sliding of a traffic delineator post and the oscillation of a light pole. In the orientation of strongest horizontal intensity, the inferred motion reaches a peak ground velocity of 202 cm/s and an incremental velocity of 366 cm/s, comparable with the most intense ground motions ever recorded and consistent with the practically simultaneous collapse of eight buildings visible in the footage. The reconstructed displacement spectral ordinate at 1 s in the maximum horizontal orientation exceeds the Next Generation Attenuation-West2 (NGA-West2) median, adjusted for directivity and directionality, by 1.32 standard deviations. NGA-West2 models predict the median intensity from all horizontal orientations, missing the strong polarization of this motion, which for this site is largest close to the strike-normal orientation. Moreover, between 0.5 and 2.5 s, the reconstructed intensities exceed those in Venezuelan seismic design standards by an average factor of approximately 1.88.

  • Empirical Models for Effective Amplitude and Fourier Phase Spectra of Ground Motions Recorded in the Chilean Subduction Zone

    by Maximiliano Osses-Valenzuela, Gonzalo Montalva, Javier Ojeda, Felipe Leyton, Sebastián Calderón, Pablo Heresi, Rosita Jünemann

    Chile, situated along the active Nazca–South America subduction zone, experiences frequent moderate-to-large earthquakes that pose a significant risk to its infrastructure and communities. Accurate characterization of ground motion is therefore essential for seismic hazard assessment and earthquake-resistant design. In this work, we develop empirical models for the effective amplitude spectra (EAS) and group delay time, which is a frequency-dependent, phase-related descriptor defined as the negative derivative of the Fourier phase spectra (FPS). Both models are developed using a comprehensive dataset of recordings from the Chilean subduction zone, encompassing events with magnitudes ranging from M 4.6 to 7 and distinguishing between interface and inslab sources. We introduce functional forms for both spectral models inspired by recent advances in ground-motion modeling and apply Bayesian regression to quantify the dependence of spectral amplitudes on magnitude, hypocentral distance, source type, and site conditions. In addition, the FPS is analyzed to identify systematic phase variations associated with group delay, providing insights into wave propagation characteristics. The resulting models provide a spectrum-based alternative to traditional ground-motion models, enabling realistic time-history simulations. These developments contribute to a more refined understanding of frequency-domain properties of subduction earthquakes in Chile, enabling the prediction of ground motion and assessment of structural resistance to seismic effects.

  • Open Access

    Geotechnical Aspects of the June 24, 2026 Catia La Mar, Venezuela Earthquak: Observation from the ground

    by Francisco Pinto, Noemi González, Gonzalo Montalva, Eduardo Miranda, Nathan Girmay, Diego Montemayor, Pablo Heresi, Juan Espitia

    The June 24, 2026 Catia La Mar earthquake caused severe and spatially variable damage across Caracas and La Guaira, Venezuela. This article documents the main geotechnical and geological observations collected during the team's immediate post-earthquake reconnaissance. The field reconnaissance mission began approximately three days after the earthquake, when perishable evidence of ground failure could still be preserved and documented despite substantial logistical, access, communication, and safety constraints following the event. In Caracas, structural damage was primarily concentrated within the deeper, long-period areas of the sedimentary basin, consistent with strong site and basin effects. In La Guaira, intense near-fault shaking interacted with complex coastal geological settings, producing liquefaction, lateral spreading, slope instability, distributed ground shear deformation, settlements, and foundation distress. Significant deformation was documented across the distal Caraballeda alluvial fan and along the Simón Bolívar International Airport-Bicentenario Avenue corridor. Observations highlight the combined influence of a large magnitude event, source proximity, site response, geomorphology, groundwater conditions, and soil-foundation interaction on earthquake damage. The primary aim of this research is to document and disseminate perishable geotechnical data, ensuring that observations from this sequence contribute to future seismic risk evaluation and microzonation efforts both within Venezuela and elsewhere.

  • Assessment of Site Response and Building Damage Following the Mw 6.4 Copiapó Earthquake

    by Gonzalo A. Montalva, Pablo Heresi, Rosita Jünemann, Sebastián Calderón, Felipe Leyton, Javier Ojeda, Yasmín Delgado‐González, Nicolás Bastías, Rodrigo Rojas, Diego Avendaño, et al.

    On June 6, 2025, an inslab earthquake of Mw 6.4 occurred in the north‐central region of Chile, near the city of Copiapó, within the Atacama seismic gap. Despite its moderate magnitude, the event produced strong ground motions with recorded accelerations exceeding 0.4 g and widespread nonstructural damage. Due to these unusual consequences, we conducted a multidisciplinary field study, collecting in situ data, which provides an opportunity to characterize both local site conditions and structural behavior in a mature seismic gap region. Shallow shear‐wave velocity profiles and predominant site periods were derived from ambient‐vibration measurements to evaluate site amplification effects in Copiapó. Damage surveys revealed widespread nonstructural damage in designated evacuation zones, significantly impacting the functionality of numerous facilities. Finally, using ambient‐vibration measurements, we estimated the structural properties of nine buildings (five damaged and four undamaged) of a residential housing complex located within the affected area. Despite their similar architecture and design, we identified systematic differences in the dynamic properties of the damaged buildings compared to the undamaged ones. On average, damaged buildings presented approximately 20% larger fundamental vibration periods and 10% higher damping ratios than undamaged buildings. The findings of this field survey provide insight into the vulnerability of buildings under moderate seismic events, whose seismic demand remains below that expected during a major earthquake.

  • Effect of the Building Damping Model on the Regional Seismic Risk of Tall Buildings

    by James Bantis, Eduardo Miranda, Pablo Heresi

    The seismic response of lightly damped structures is strongly affected by the level of damping in their modes of vibration. This investigation assesses the influence of the damping model on the estimated seismic response and damage of a portfolio of 97 tall pre‐Northridge steel moment resisting frame buildings located in the Financial District of the city of San Francisco, California, during the 1989 Loma Prieta earthquake, using an advanced probabilistic regional seismic risk framework previously developed by the authors. Building responses and damages were computed using three different damping models, namely the one used in ASCE 7–22 (ASCE), the one recommended in the 2023 Los Angeles Tall Buildings Structural Design Council (LATBSDC), which is also adopted in the Tall Building Initiative (TBi), and the one recently developed by Cruz and Miranda (CM). Results indicate that the CM damping model predicts seismic responses and damages that, on average, fall between those estimated by the ASCE and TBi models. In particular, peak building responses and damages to gypsum partition walls can change by as much as 30% and 75%, respectively, when using the ASCE or TBi damping models with respect to those computed with the CM damping model. However, responses and damages at different building heights, not just where responses and damages are maximum, can change by much more than 30% and 75%, respectively. Moreover, peak responses and damages to gypsum partition walls can change by nearly 50% and more than 400%, respectively, if the ASCE damping model is used instead of the LATBSDC or TBi damping model. Additionally, changes in peak damages to other building components may be significantly larger than those observed for gypsum partition walls due to a change in the building damping model. Large changes in building responses and damages may also lead to significant changes in expected monetary losses. These findings illustrate the significance of the building damping model on regional seismic risk assessment results. They also highlight some of the limitations of the damping models currently used in ASCE and LATBSDC/TBi.

  • Open Access

    From Interseismic Coupling to Ground Motions: An Empirical Amplitude and Phase Approach for Megathrust Earthquake Simulations

    by Javier Ojeda, Gonzalo Montalva, Maximiliano Osses-Valenzuela, Nicolás Bastías, Felipe Leyton, Pablo Heresi, Rosita Jünemann, Sebastián Calderón

    Time-dependent seismic hazard assessments require ground-motion models that capture source complexity, rupture timing, and the spatial variability of intensity measures, while remaining applicable to engineering practice. Here, we present a simulation framework that combines empirical models for the Effective Amplitude Spectrum (EAS) and the Group Delay Time (GDT) with physics-informed rupture scenarios to generate broadband ground-motion time histories for large interface earthquakes and potential future events based on interseismic coupling models. The empirical EAS and GDT models are derived from a curated strong-motion dataset from the Chilean subduction zone, encompassing relatively small events with magnitudes ranging from 4.6 to 7.0. To extend the approach to megathrust earthquakes, we adopt a rupture-decomposition strategy in which the total seismic moment is distributed among subevents with prescribed rupture and travel times. We first apply the framework to the 2010 Mw 8.8 Maule, 2014 Mw 8.1 Iquique, and 2015 Mw 8.3 Illapel earthquakes, using coseismic slip models and also interseismic coupling distributions, to examine whether coupling can serve as a proxy for earthquake ruptures. The observed-versus-predicted comparison of seismic intensities includes Fourier amplitudes, Arias intensity, pseudo-spectral acceleration ordinates, PGA, and PGV. Despite its relative simplicity, the approach reproduces the main amplitude and temporal characteristics of observed ground motions. Slip-based simulations tend to slightly overestimate shaking amplitudes, whereas coupling-based scenarios produce lower, more conservative ground motions while preserving realistic durations. Residual analyses show improved temporal coherence and spatial variability compared to commonly used predictive ground-motion models. In light of these results, we finally apply this approach to mature seismic gaps identified from geodetic coupling models along the Chilean margin, including the Atacama and Central Chile segments, last ruptured in 1922 (Mw~8.5) and 1730 (Mw~9.0), respectively. Simulations at virtual stations reveal high seismic intensities in densely populated cities such as Valparaíso and Santiago, underscoring the importance of integrating time-dependent exposure and vulnerability models to compute the seismic risk associated with the 1730-type scenario. These findings highlight the value of including coupling information into time-dependent ground-motion simulations and demonstrate how rupture timing and fault loading influence seismic hazard assessments. The proposed framework provides a physically consistent and engineering-relevant tool for seismic hazard analysis in subduction environments.

  • An Extended and Updated Strong Ground‐Motion Database for the Chilean Subduction Earthquakes

    by Nicolás Bastías, Gonzalo Montalva, Felipe Leyton, Pablo Heresi, Horacio Domínguez

    This study provides an updated strong ground‐motion database for the Chilean subduction zone, building on the original compilation by Bastías and Montalva (2016). The database includes a much larger number of seismic records, events, and stations than previous versions. Metadata have also been enhanced to offer more details about tectonic setting, site conditions, and event characteristics, increasing the database's usefulness for seismic hazard analysis and earthquake engineering. The updated database comprises 43,050 records from 6,679 earthquakes with magnitudes from 4.0 to 8.8, recorded at 530 stations between 1985 and 2024. It classifies seismic events into interface, inslab, shallow crustal, and outerrise types based on depth, focal mechanism, and location. The seismic station network provides adequate coverage across the country, with many sites having measured shear‐wave velocity data. When direct Vs30 measurements are unavailable, Vs30 values were estimated using a three‐proxy approach. Distance metrics were calculated using rupture models from literature or simulations based on metadata for each event. The record flatfile includes various intensity measures, such as peak, spectral, and nonspectral intensities. Notably, the dataset also offers orientation‐independent horizontal spectra and azimuth data for the RotD100 horizontal spectra. The datasets are formatted as flatfiles, including comprehensive metadata on records, events, and stations. This extensive database supports diverse earthquake engineering applications and research, such as structural design, seismic hazard assessment, ground‐motion modeling, and earthquake loss estimation. The database is accessible through Designsafe at https://doi.org/10.17603/ds2‐6gyp‐t353 .


  • Open Access

    Correlations of Horizontal and Vertical Spectral Accelerations for the Chilean Subduction Zone

    by Rodrigo Rojas, Alexis Carranza, Pablo Heresi

    This study develops parametric models for the correlation between vertical and horizontal components of spectral accelerations in the Chilean subduction zone. The models are based on seismic records from national databases and recent ground motion models developed for the region. The effects of magnitude, distance, site conditions, and model selection on correlations are evaluated and found to be negligible, supporting the use of a simplified formulation. The proposed models are compared to existing models developed for other regions, showing significant differences, especially for inslab earthquakes. Despite these differences, the impact on practical applications is limited due to the low sensitivity of hazard estimates to variations in correlation at low correlation values. The results are suitable for use in seismic hazard analyses that incorporate vertical ground motion, enabling more comprehensive assessments for structures sensitive to this component. The study highlights the importance of developing region-specific models and identifies future needs, including expanding local ground motion models to additional intensity measures and refining correlation functions to better capture differences between interface and inslab events.