Piyachat Wattanachai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Piyachat Wattanachai has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Patiparn Boonruam
Chemical Engineering Department, Faculty of Engineering, Burapha University, 169 Long-had Bangsaen Road, T. Saensook, A. Muang, Chonburi 20131, Thailand
1 shared publication - Settakorn Upasen
Department of Chemical Engineering, Engineering Faculty, Burapha University, Chonburi, Thailand
1 shared publication
Latest Publications
- Open Access
- 22 October 2018
- Published by MDPI AG in Proceedings
- Vol. 2 (20) , 1314
Study on Chlorinated Gas Adsorption Using Activated Carbon via Polyvinyl Chloride (PVC) Stepwise Pyrolysis Process
In this research, we studied the chlorinated gas adsorption process using activated carbon. Two types of granular activated carbon were employed: GAC800 and GAC1200; with specific surface areas of 800 m2/g and 1200 m2/g, respectively. In order to optimize the polyvinyl chloride (PVC) dehydrochlorination conditions, three parameters were studied: (i) the type of precursor—PVC and PVC mixed with charcoal (1:1 by weight)—(ii) the temperature—300 and 400 °C—and (iii) the retention time—30, 120, and 240 min. Mohr’s method and acid-base titration were used to estimate the captured amount of chlorinated gas. The results indicated that the PVC dehydrochlorination occurred completely about 69–73 wt.% at 400 °C for 240 min. The amount of chloride ion was detected around 1–2 mmol/LNaOH. The estimated HCl adsorption capacity for the GAC800 and GAC1200 samples potentially absorbed 0.27 mgHCl/gGAC and 0.21 mgHCl/gGAC, respectively. In addition, the efficiency for GAC800 and GAC1200 was reported to 37.95% and 28.92%, respectively.
- 22 October 2018
- Published by MDPI AG in Proceedings
- Vol. 2 (20) , 1314
Open AccessStudy on Chlorinated Gas Adsorption Using Activated Carbon via Polyvinyl Chloride (PVC) Stepwise Pyrolysis Process
In this research, we studied the chlorinated gas adsorption process using activated carbon. Two types of granular activated carbon were employed: GAC800 and GAC1200; with specific surface areas of 800 m2/g and 1200 m2/g, respectively. In order to optimize the polyvinyl chloride (PVC) dehydrochlorination conditions, three parameters were studied: (i) the type of precursor—PVC and PVC mixed with charcoal (1:1 by weight)—(ii) the temperature—300 and 400 °C—and (iii) the retention time—30, 120, and 240 min. Mohr’s method and acid-base titration were used to estimate the captured amount of chlorinated gas. The results indicated that the PVC dehydrochlorination occurred completely about 69–73 wt.% at 400 °C for 240 min. The amount of chloride ion was detected around 1–2 mmol/LNaOH. The estimated HCl adsorption capacity for the GAC800 and GAC1200 samples potentially absorbed 0.27 mgHCl/gGAC and 0.21 mgHCl/gGAC, respectively. In addition, the efficiency for GAC800 and GAC1200 was reported to 37.95% and 28.92%, respectively.