Evgeniy Sarach
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Evgeniy Sarach has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Alexander A. Lychagov
KAMAZ
1 shared publication Alexander Tsipilev
Bauman Moscow State Technical University, Russia
1 shared publication- Boris B. Kositsyn
Bauman Moscow State Technical University
1 shared publication George Kotiev
Bauman Moscow State Technical University, Russia
1 shared publicationIgor Smirnov
Moscow Polytechnic University, Russia
1 shared publication- Ilya A. Smirnov
Bauman Moscow State Technical University
1 shared publication
Latest Publications
- 27 September 2023
- Published by ECO-Vector LLC in Izvestia MGTU MAMI
- Vol. 17 (2) , 147-156
Method for selecting the damping characteristics of the pneumohydraulic suspension system of a wheeled vehicle
BACKGROUND: In the process of developing suspension systems for modern high-speed wheeled and tracked vehicles, having the selected optimal elastic characteristic curve of the suspension system, its unsatisfactory damping characteristic curve can have a significant negative impact on the overall operation of the suspension unit. Therefore, the search for a method for obtaining the optimal damping characteristic curve is a relevant task. AIMS: Description the method for selecting the damping characteristic curve of a single-level pneumohydraulic spring for a wheeled vehicle considering the motion along tracks with a harmonic profile and a rough cobblestone road. METHODS: The damping characteristic curve of the spring is selected using simulation mathematical modeling in the MATLAB/Simulink software, which makes it possible to take into account the nonlinearity of the suspension characteristics. In the process of building the characteristic curve, the limit values of the forces at the front wheels tires are fixed for the sections of the characteristic curve that operate with the valves of the pneumohydraulic spring turned off. Accelerations at the driver's seat and the pressure in the spring chamber are fixed for the sections of the characteristic curve that operate with the valves are turned on. RESULTS: The results of the selection of an optimized damping characteristic curve showed an improved contact of the wheels with the surface and an increase in the stability of the vehicle, a decrease in vibration accelerations at low disturbance frequencies. CONCLUSIONS: The practical value of the study lies in the possibility of using this method to develop suspension systems for new wheeled and tracked vehicles.
- 27 September 2023
- Published by ECO-Vector LLC in Izvestia MGTU MAMI
- Vol. 17 (2) , 147-156
Method for selecting the damping characteristics of the pneumohydraulic suspension system of a wheeled vehicle
BACKGROUND: In the process of developing suspension systems for modern high-speed wheeled and tracked vehicles, having the selected optimal elastic characteristic curve of the suspension system, its unsatisfactory damping characteristic curve can have a significant negative impact on the overall operation of the suspension unit. Therefore, the search for a method for obtaining the optimal damping characteristic curve is a relevant task. AIMS: Description the method for selecting the damping characteristic curve of a single-level pneumohydraulic spring for a wheeled vehicle considering the motion along tracks with a harmonic profile and a rough cobblestone road. METHODS: The damping characteristic curve of the spring is selected using simulation mathematical modeling in the MATLAB/Simulink software, which makes it possible to take into account the nonlinearity of the suspension characteristics. In the process of building the characteristic curve, the limit values of the forces at the front wheels tires are fixed for the sections of the characteristic curve that operate with the valves of the pneumohydraulic spring turned off. Accelerations at the driver's seat and the pressure in the spring chamber are fixed for the sections of the characteristic curve that operate with the valves are turned on. RESULTS: The results of the selection of an optimized damping characteristic curve showed an improved contact of the wheels with the surface and an increase in the stability of the vehicle, a decrease in vibration accelerations at low disturbance frequencies. CONCLUSIONS: The practical value of the study lies in the possibility of using this method to develop suspension systems for new wheeled and tracked vehicles.
- Open Access
- 26 October 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 346, 03103
Control Algorithm Selection Technique for Vehicle Robotic Transmission in the Urban Cycle
Environmental pollution is one of the most crucial problems in modern world. The toughening of emission standards for toxic fumes, which appear due to the combustion of fossil fuels in internal combustion engines, forces manufacturers to reduce fuel consumption, for example, via more rational use of the internal combustion engine capabilities. This paper is devoted to developing a control algorithm selection technique for economy class passenger car robotic transmission in the conditions of an urban cycle, using Lada Vesta SW Cross as a research subject. At the beginning of the paper, vehicle movement imitational mathematical model implementation, which was developed using LMS Imagine. Lab Amesim program complex. is shown. Also the main assumptions and parameters of engines, cooling systems, transmissions and chassis are given. Then imitational mathematical model verification results, which were processed by comparing movement computer simulation results with the vehicle passport data, are shown. Imitational mathematical model demonstrates the car behavior adequately and very precisely, which means it can be used for vehicle fuel efficiency research. In the main part of the paper, vehicle movement research is conducted in case of three different versions of the internal combustion engine (which has 1,4-, 1,6- and 1,8-liters volume) used in an urban cycle INRETS urbanfluide2. It is clearly shown that the lowest consumption is achieved by reducing the acceleration and braking dynamics via “early” gear shifting, and the crankshaft rotation speed at the corresponding moment of the shift has to be selected for each gear separately. Based on the research results, a switching algorithm and its selection technique, which takes the throttle valve opening degree and the type of the internal combustion engine external speed characteristic into consideration, are presented. In conclusion, this paper presents the results of vehicle movement imitational mathematical modeling in the urban cycle with a modified robotic transmission control algorithm. It is clear that this algorithm can reduce fuel consumption in the urban cycle by 12-20%, depending on the engine volume.
- 26 October 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 346, 03103
Open AccessControl Algorithm Selection Technique for Vehicle Robotic Transmission in the Urban Cycle
Environmental pollution is one of the most crucial problems in modern world. The toughening of emission standards for toxic fumes, which appear due to the combustion of fossil fuels in internal combustion engines, forces manufacturers to reduce fuel consumption, for example, via more rational use of the internal combustion engine capabilities. This paper is devoted to developing a control algorithm selection technique for economy class passenger car robotic transmission in the conditions of an urban cycle, using Lada Vesta SW Cross as a research subject. At the beginning of the paper, vehicle movement imitational mathematical model implementation, which was developed using LMS Imagine. Lab Amesim program complex. is shown. Also the main assumptions and parameters of engines, cooling systems, transmissions and chassis are given. Then imitational mathematical model verification results, which were processed by comparing movement computer simulation results with the vehicle passport data, are shown. Imitational mathematical model demonstrates the car behavior adequately and very precisely, which means it can be used for vehicle fuel efficiency research. In the main part of the paper, vehicle movement research is conducted in case of three different versions of the internal combustion engine (which has 1,4-, 1,6- and 1,8-liters volume) used in an urban cycle INRETS urbanfluide2. It is clearly shown that the lowest consumption is achieved by reducing the acceleration and braking dynamics via “early” gear shifting, and the crankshaft rotation speed at the corresponding moment of the shift has to be selected for each gear separately. Based on the research results, a switching algorithm and its selection technique, which takes the throttle valve opening degree and the type of the internal combustion engine external speed characteristic into consideration, are presented. In conclusion, this paper presents the results of vehicle movement imitational mathematical modeling in the urban cycle with a modified robotic transmission control algorithm. It is clear that this algorithm can reduce fuel consumption in the urban cycle by 12-20%, depending on the engine volume.
- Open Access
- 30 October 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 224, 04009
Methods for road microprofile statistical data transformation
In the paper presents methods for road microprofile statistical data transformation. These methods can be used to solve suspension theory problems related to rapidity functions determination using velocity characteristics and transport vehicle movement imitational modeling via microprofile random function trajectory.
- 30 October 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 224, 04009
Open AccessMethods for road microprofile statistical data transformation
In the paper presents methods for road microprofile statistical data transformation. These methods can be used to solve suspension theory problems related to rapidity functions determination using velocity characteristics and transport vehicle movement imitational modeling via microprofile random function trajectory.