Srinibas Karmakar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Srinibas Karmakar has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Arnab Roy
4 shared publications- D. Chaitanya Kumar Rao
Indian Institute of Technology
3 shared publications Manish Kumar
3 shared publicationsP. Prabhudeva
3 shared publicationsSaptarshi Basu
Interdisciplinary Centre for Energy Research, Indian Institute of Science, Bangalore, India
3 shared publications- Arnab Roy
Department of Aerospace Engineering, IIT Kharagpur, India
2 shared publications
Latest Publications
- 29 September 2026
- Published by Taylor & Francis in Combustion Science and Technology
- p. 1-28
Ignition and Combustion Characteristics of Boron-Enriched Hypergolic Solid Fuels with High-Concentration Hydrogen Peroxide
Advancements in modern propulsion technologies demand solutions that offer high performance, operational safety, environmental sustainability, and mission flexibility. Developments in air-breathing...
- 29 September 2026
- Published by Taylor & Francis in Combustion Science and Technology
- p. 1-28
Ignition and Combustion Characteristics of Boron-Enriched Hypergolic Solid Fuels with High-Concentration Hydrogen Peroxide
Advancements in modern propulsion technologies demand solutions that offer high performance, operational safety, environmental sustainability, and mission flexibility. Developments in air-breathing...
- 25 December 2025
- Published by Elsevier in Aerospace Science and Technology
- Vol. 170
Ballistic performance of boron-HTPB fuelled hybrid gas generator-based ducted rockets (HGDR)
- 25 December 2025
- Published by Elsevier in Aerospace Science and Technology
- Vol. 170
Ballistic performance of boron-HTPB fuelled hybrid gas generator-based ducted rockets (HGDR)
- 27 September 2024
- Published by Elsevier in Combustion and Flame
- Vol. 270
Spray combustion characteristics of boron slurry fuel in high particle loading conditions
- 27 September 2024
- Published by Elsevier in Combustion and Flame
- Vol. 270
Spray combustion characteristics of boron slurry fuel in high particle loading conditions
- Open Access
- 1 September 2024
- Published by KEAI Publishing in FirePhysChem
- Vol. 4 (3) , 185-200
Boron-loaded gel fuel as potential fuel for ramjet and scramjet engines- recent advancements
- 1 September 2024
- Published by KEAI Publishing in FirePhysChem
- Vol. 4 (3) , 185-200
Open AccessBoron-loaded gel fuel as potential fuel for ramjet and scramjet engines- recent advancements
- Open Access
- 26 March 2024
- Published by Defence Scientific Information and Documentation Centre in Defence Science Journal
- Vol. 74 (2) , 278-287
Evaluation of Boron Combustion for Ducted Rocket Applications Using Condensed Product Analysis
Boron, a metalloid, produces high energy upon combustion. It is recommended as an ingredient for fuel or propellant in rocket propulsion, despite the challenge of extracting its full thermal energy. So far no one has claimed the complete energy conversion of boron upon combustion. On the other hand, the current propulsion system of the Meteor missile uses boron-loaded propellant. The boron-loaded propellant provides an approximately three-fold increase in specific impulse compared to conventional propellants. The present study focuses on boron-HTPB-based solid fuels impregnated with early ignited particles as additives, aiming to assess the combustion performance of boron particles. These additives are magnesium (Mg), titanium (Ti), and activated charcoal (C), and their effects are evaluated based on the residual active boron content in the condensed combustion products (burned residues). An economical tool commonly called stagnation flow or opposed flow burner (OFB) is used to deflagrate the fuel sample by means of pressurized oxygen gas. The condensed combustion products are examined using a field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential thermal analysis (DTA). Among the fuel combinations investigated here, magnesium has been found to be a good burning enhancer of boron, leaving the lowest active boron content (30%) in the burned-out residue. The current research aims to develop an efficient boron-containing solid fuel for hybrid propellant ducted rocket engine applications.
- 26 March 2024
- Published by Defence Scientific Information and Documentation Centre in Defence Science Journal
- Vol. 74 (2) , 278-287
Open AccessEvaluation of Boron Combustion for Ducted Rocket Applications Using Condensed Product Analysis
Boron, a metalloid, produces high energy upon combustion. It is recommended as an ingredient for fuel or propellant in rocket propulsion, despite the challenge of extracting its full thermal energy. So far no one has claimed the complete energy conversion of boron upon combustion. On the other hand, the current propulsion system of the Meteor missile uses boron-loaded propellant. The boron-loaded propellant provides an approximately three-fold increase in specific impulse compared to conventional propellants. The present study focuses on boron-HTPB-based solid fuels impregnated with early ignited particles as additives, aiming to assess the combustion performance of boron particles. These additives are magnesium (Mg), titanium (Ti), and activated charcoal (C), and their effects are evaluated based on the residual active boron content in the condensed combustion products (burned residues). An economical tool commonly called stagnation flow or opposed flow burner (OFB) is used to deflagrate the fuel sample by means of pressurized oxygen gas. The condensed combustion products are examined using a field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential thermal analysis (DTA). Among the fuel combinations investigated here, magnesium has been found to be a good burning enhancer of boron, leaving the lowest active boron content (30%) in the burned-out residue. The current research aims to develop an efficient boron-containing solid fuel for hybrid propellant ducted rocket engine applications.
- 13 February 2024
- Published by Elsevier in Advanced Powder Technology
- Vol. 35 (3)
Investigation on stability and energy potential of boron-loaded slurry fuel with higher loadings
- 13 February 2024
- Published by Elsevier in Advanced Powder Technology
- Vol. 35 (3)
Investigation on stability and energy potential of boron-loaded slurry fuel with higher loadings
- Open Access
- 1 September 2023
- Published by KEAI Publishing in FirePhysChem
- Vol. 3 (3) , 179-200
A short review of challenges and prospects of boron-laden solid fuels for ramjet applications
- 1 September 2023
- Published by KEAI Publishing in FirePhysChem
- Vol. 3 (3) , 179-200
Open AccessA short review of challenges and prospects of boron-laden solid fuels for ramjet applications
- 1 February 2023
- Published by SAGE Publications in International Journal of Spray and Combustion Dynamics
- Vol. 15 (1) , 70-87
Spray characterization of boron-loaded slurry fuels using high-speed imaging technique
The characterization of atomized spray in terms of its structure, break-up, and droplet morphology is crucial to analyze an engine's performance. Therefore, in this study, the spray characteristics of boron-laden slurry fuels have been evaluated experimentally through a high-speed imaging technique. The rheological properties of the boron-loaded slurry fuels have been measured and their impact on the atomization behavior has been qualitatively analyzed. The spray cone angle, penetration length, sheet break-up length, ligament length, ligament diameter, and droplet diameter distribution are obtained by processing the time-sequences images. The experiments were performed at three atomizing air-to-liquid ratios (ALR). Spray characteristics of the fuel samples with various particle loadings (10%, 20%, and 30%) have been analyzed and compared with that of the pure Jet A-1. The obtained results were qualitatively analyzed with different non-dimensional parameters, such as Momentum flux ratio, Weber number, Ohensorge number, and Reynolds number. The results show that an increase in viscosity due to particle loading significantly affects the spray characteristics. However, a better atomization behavior of boron slurry fuel at higher ALR than low ALR, even with higher particle loading, has been observed. This is possibly due to the change in momentum flux ratio at higher atomizing air velocity.
- 1 February 2023
- Published by SAGE Publications in International Journal of Spray and Combustion Dynamics
- Vol. 15 (1) , 70-87
Spray characterization of boron-loaded slurry fuels using high-speed imaging technique
The characterization of atomized spray in terms of its structure, break-up, and droplet morphology is crucial to analyze an engine's performance. Therefore, in this study, the spray characteristics of boron-laden slurry fuels have been evaluated experimentally through a high-speed imaging technique. The rheological properties of the boron-loaded slurry fuels have been measured and their impact on the atomization behavior has been qualitatively analyzed. The spray cone angle, penetration length, sheet break-up length, ligament length, ligament diameter, and droplet diameter distribution are obtained by processing the time-sequences images. The experiments were performed at three atomizing air-to-liquid ratios (ALR). Spray characteristics of the fuel samples with various particle loadings (10%, 20%, and 30%) have been analyzed and compared with that of the pure Jet A-1. The obtained results were qualitatively analyzed with different non-dimensional parameters, such as Momentum flux ratio, Weber number, Ohensorge number, and Reynolds number. The results show that an increase in viscosity due to particle loading significantly affects the spray characteristics. However, a better atomization behavior of boron slurry fuel at higher ALR than low ALR, even with higher particle loading, has been observed. This is possibly due to the change in momentum flux ratio at higher atomizing air velocity.