Vicente Sarrablo Moreno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vicente Sarrablo Moreno has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Jordi Roviras Miñana
LITEIS Research Group (Laboratory of Technological Innovation in Industrialized and Sustainable Edification), School of Architecture, Universitat Internacional de Catalunya (UIC), 08017 Barcelona, Spain
3 shared publications - Pedro Casariego
LITEIS Research Group (Laboratory of Technological Innovation in Industrialized and Sustainable Edification), School of Architecture, Universitat Internacional de Catalunya (UIC), 08017 Barcelona, Spain
2 shared publications F. Sánchez
Disset, S. L. Mataró
1 shared publicationJ. Roviras
Universitat Internacional de Catalunya
1 shared publicationJordi Roviras
1 shared publication- Lluís Gil
Department of Strength of Materials and Structures in Engineering, Polytechnic University of Catalonia, 08222 Terrassa, Spain
1 shared publication
Latest Publications
- Open Access
Experimental Evaluation of a Concealed Anchoring System for Large-Format Thin Ceramic Panels Under Wind Loading in Ventilated Façades
Large-format thin ceramic panels are increasingly used in ventilated façade systems due to their reduced weight, high durability and architectural versatility. However, their reduced thickness and large dimensions require reliable anchoring solutions capable of safely transferring wind loads to the supporting structure. This study investigates the structural behaviour of a concealed mechanical anchoring system for large-format porcelain stoneware panels installed in ventilated façades. An experimental campaign was carried out using a full-scale façade prototype representative of real construction conditions. The specimen was subjected to incremental wind pressure and suction loading in a controlled laboratory environment while monitoring the deformation of the ceramic panels, backing support layer and aluminium substructure. The experimental results show that the ceramic panels exhibited stable structural behaviour without cracking or anchor pull-out under pressure levels up to 3006 Pa, exceeding twice the design service pressure. The maximum estimated deflection at the service pressure level (1300 Pa) was 5.7 mm, significantly below the admissible limit defined by the L/200 serviceability criterion. A simplified mechanical analysis based on classical bending theory confirmed that the stresses induced in the ceramic panels remained well below their flexural strength. The results demonstrate that the investigated concealed anchoring system provides reliable structural performance for large-format thin ceramic panels subjected to wind loading in ventilated façade systems, while the simplified analytical verification confirms the mechanical consistency between the measured deformation levels and the flexural capacity of the ceramic material.
Open AccessExperimental Evaluation of a Concealed Anchoring System for Large-Format Thin Ceramic Panels Under Wind Loading in Ventilated Façades
Large-format thin ceramic panels are increasingly used in ventilated façade systems due to their reduced weight, high durability and architectural versatility. However, their reduced thickness and large dimensions require reliable anchoring solutions capable of safely transferring wind loads to the supporting structure. This study investigates the structural behaviour of a concealed mechanical anchoring system for large-format porcelain stoneware panels installed in ventilated façades. An experimental campaign was carried out using a full-scale façade prototype representative of real construction conditions. The specimen was subjected to incremental wind pressure and suction loading in a controlled laboratory environment while monitoring the deformation of the ceramic panels, backing support layer and aluminium substructure. The experimental results show that the ceramic panels exhibited stable structural behaviour without cracking or anchor pull-out under pressure levels up to 3006 Pa, exceeding twice the design service pressure. The maximum estimated deflection at the service pressure level (1300 Pa) was 5.7 mm, significantly below the admissible limit defined by the L/200 serviceability criterion. A simplified mechanical analysis based on classical bending theory confirmed that the stresses induced in the ceramic panels remained well below their flexural strength. The results demonstrate that the investigated concealed anchoring system provides reliable structural performance for large-format thin ceramic panels subjected to wind loading in ventilated façade systems, while the simplified analytical verification confirms the mechanical consistency between the measured deformation levels and the flexural capacity of the ceramic material.
- Open Access
Silicon-Based Solar Brick for Textile Ceramic Technology
Recent advances in prefabricated construction have enabled modular systems offering structural performance, rapid assembly, and design flexibility. Textile Ceramic Technology (TCT) integrates ceramic elements within a stainless-steel mesh, creating versatile architectural envelopes for façades, roofs, and pavements. This study investigates the integration of silicon photovoltaic (PV) modules into TCT to develop an industrialized Building-Integrated Photovoltaics (BIPV) system that maintains energy efficiency and visual coherence. Three full-scale solar brick prototypes are presented, detailing design objectives, experimental results, and conclusions. The first prototype demonstrated the feasibility of scaling small silicon PV units with good efficiency but limited aesthetic integration. The second embedded PV cells within ceramic bricks, improving aesthetics while maintaining electrical performance. Durability tests—including humidity, temperature cycling, wind, and hail impact—confirmed system stability, though structural reinforcement is needed for impact resistance. The third prototype outlines future work focusing on modularity and industrial scalability. Results confirm the technical viability of silicon PV integration in TCT, enabling active façades that generate renewable energy without compromising architectural freedom or aesthetics. This research advances industrialized, sustainable building envelopes that reduce environmental impact through distributed energy generation.
Open AccessSilicon-Based Solar Brick for Textile Ceramic Technology
Recent advances in prefabricated construction have enabled modular systems offering structural performance, rapid assembly, and design flexibility. Textile Ceramic Technology (TCT) integrates ceramic elements within a stainless-steel mesh, creating versatile architectural envelopes for façades, roofs, and pavements. This study investigates the integration of silicon photovoltaic (PV) modules into TCT to develop an industrialized Building-Integrated Photovoltaics (BIPV) system that maintains energy efficiency and visual coherence. Three full-scale solar brick prototypes are presented, detailing design objectives, experimental results, and conclusions. The first prototype demonstrated the feasibility of scaling small silicon PV units with good efficiency but limited aesthetic integration. The second embedded PV cells within ceramic bricks, improving aesthetics while maintaining electrical performance. Durability tests—including humidity, temperature cycling, wind, and hail impact—confirmed system stability, though structural reinforcement is needed for impact resistance. The third prototype outlines future work focusing on modularity and industrial scalability. Results confirm the technical viability of silicon PV integration in TCT, enabling active façades that generate renewable energy without compromising architectural freedom or aesthetics. This research advances industrialized, sustainable building envelopes that reduce environmental impact through distributed energy generation.
- Open Access
The Role of Ceramics in the Configuration of a New Solar Thermal Collection System for Domestic Hot Water and Heating
The work presented in this study aims to demonstrate the capacity of ceramic materials in the configuration of solar thermal collectors (CSTs) for the production of domestic hot water (DHW) and heating in buildings. Currently, the ceramic tile and panel manufacturing sector presents very advanced manufacturing systems at a technological level that allows the generation of pieces with high physical and mechanical performances. Especially, their high resistances to extreme temperatures and good thermal conductivities position these materials as great candidates in the field of CSTs. In addition, ceramic materials tend to be durable and corrosion resistant, which makes them a very reliable option in the long term. The results obtained in the test campaign and presented in the article confirm the capacity of ceramics to meet the basic requirements of a CST system for buildings in terms of absorption, energy performance, watertightness, and resistance to water pressure, among other aspects, and make it possible to advance new research to improve the behaviors, performances, and architectural integration of ceramic collectors.
Open AccessThe Role of Ceramics in the Configuration of a New Solar Thermal Collection System for Domestic Hot Water and Heating
The work presented in this study aims to demonstrate the capacity of ceramic materials in the configuration of solar thermal collectors (CSTs) for the production of domestic hot water (DHW) and heating in buildings. Currently, the ceramic tile and panel manufacturing sector presents very advanced manufacturing systems at a technological level that allows the generation of pieces with high physical and mechanical performances. Especially, their high resistances to extreme temperatures and good thermal conductivities position these materials as great candidates in the field of CSTs. In addition, ceramic materials tend to be durable and corrosion resistant, which makes them a very reliable option in the long term. The results obtained in the test campaign and presented in the article confirm the capacity of ceramics to meet the basic requirements of a CST system for buildings in terms of absorption, energy performance, watertightness, and resistance to water pressure, among other aspects, and make it possible to advance new research to improve the behaviors, performances, and architectural integration of ceramic collectors.
- Open Access
- 1 June 2019
- Published by Universitat Politècnica de Catalunya in Palimpsesto
- No. 19,p. 17-19
Bóvedas cerámicas. Un viaje transatlántico de ida y vuelta
En un momento en que se vuelven a apreciar los techos abovedados se considera relevante conocer los progresos de un sistema estructural como las bóvedas latericias que parecían relegadas a la tradición constructiva y que, sin embargo, en los últimos tiempos han alcanzado importantes niveles de industrialización y buenas prestaciones técnicas para competir con los techos planos.La evolución de las bóvedas de ladrillo cerámico ha recorrido un portentoso viaje de ida y vuelta: desde el Mediterráneo hasta América y vuelta a Europa. Su avance a través de los siglos fue mejorando su velocidad constructiva, su configuración formal, su ligereza o su capacidad para cubrir luces cada vez mayores. En distintas épocas los conocimientos sobre las bóvedas tabicadas partieron desde Cataluña cruzando el Atlántico hasta Estados Unidos, Cuba, Colombia, Argentina, Uruguay, México y Brasil. En estos países las bóvedas cerámicas se fueron adaptando a sus circunstancias locales para volver en los años 90 a su lugar de origen perfeccionadas por las experiencias americanas que habían trabajado en dos líneas nuevas: las bóvedas armadas y las bóvedas prefabricadas. Las obras en España de Clemente + de la Hoz, Churtichaga + Quadra Salcedo o Vicente Sarrablo han aprovechado y destilado todos esos adelantos. Now that vaulted ceilings are again appreciated, it is relevant to know the progress of a structural system such as the vaults that appeared to be relegated to the constructive tradition and that, however, in recent times have reached important levels of industrialization and good technical features that allow them to compete with flat roofs.The evolution of ceramic vaults has gone through a portentous round trip: from the Mediterranean to America and back to Europe. Its progress through the centuries has improved its constructive speed, its formal configuration, its lightness or its capacity to bridge bigger spans.
- 1 June 2019
- Published by Universitat Politècnica de Catalunya in Palimpsesto
- No. 19,p. 17-19
Open AccessBóvedas cerámicas. Un viaje transatlántico de ida y vuelta
En un momento en que se vuelven a apreciar los techos abovedados se considera relevante conocer los progresos de un sistema estructural como las bóvedas latericias que parecían relegadas a la tradición constructiva y que, sin embargo, en los últimos tiempos han alcanzado importantes niveles de industrialización y buenas prestaciones técnicas para competir con los techos planos.La evolución de las bóvedas de ladrillo cerámico ha recorrido un portentoso viaje de ida y vuelta: desde el Mediterráneo hasta América y vuelta a Europa. Su avance a través de los siglos fue mejorando su velocidad constructiva, su configuración formal, su ligereza o su capacidad para cubrir luces cada vez mayores. En distintas épocas los conocimientos sobre las bóvedas tabicadas partieron desde Cataluña cruzando el Atlántico hasta Estados Unidos, Cuba, Colombia, Argentina, Uruguay, México y Brasil. En estos países las bóvedas cerámicas se fueron adaptando a sus circunstancias locales para volver en los años 90 a su lugar de origen perfeccionadas por las experiencias americanas que habían trabajado en dos líneas nuevas: las bóvedas armadas y las bóvedas prefabricadas. Las obras en España de Clemente + de la Hoz, Churtichaga + Quadra Salcedo o Vicente Sarrablo han aprovechado y destilado todos esos adelantos. Now that vaulted ceilings are again appreciated, it is relevant to know the progress of a structural system such as the vaults that appeared to be relegated to the constructive tradition and that, however, in recent times have reached important levels of industrialization and good technical features that allow them to compete with flat roofs.The evolution of ceramic vaults has gone through a portentous round trip: from the Mediterranean to America and back to Europe. Its progress through the centuries has improved its constructive speed, its formal configuration, its lightness or its capacity to bridge bigger spans.
- Open Access
Design of a New Solar Thermal Collector with Ceramic Materials Integrated into the Building Facades
The work presented here aims to demonstrate the technical, architectural, and energy viability of solar thermal collectors made with ceramic materials and their suitability for domestic hot water (DHW) and building heating systems in the Mediterranean climate. The proposal is for the design of a ceramic shell, formed by collector and non-collecting panels, which forms part of the building system itself, and is capable of responding to the basic requirements of a building envelope and harnessing solar energy. Ceramics considerably reduce the final cost of the collector system and offer the new system a variety of compositional and chromatic finishes, occupying the entire building surface and achieving a high degree of architectural integration, although less energy-efficient compared to a conventional metallic collector.
Open AccessDesign of a New Solar Thermal Collector with Ceramic Materials Integrated into the Building Facades
The work presented here aims to demonstrate the technical, architectural, and energy viability of solar thermal collectors made with ceramic materials and their suitability for domestic hot water (DHW) and building heating systems in the Mediterranean climate. The proposal is for the design of a ceramic shell, formed by collector and non-collecting panels, which forms part of the building system itself, and is capable of responding to the basic requirements of a building envelope and harnessing solar energy. Ceramics considerably reduce the final cost of the collector system and offer the new system a variety of compositional and chromatic finishes, occupying the entire building surface and achieving a high degree of architectural integration, although less energy-efficient compared to a conventional metallic collector.
- Open Access
- 12 December 2016
- Published by Editorial CSIC in Informes de la Construcción
- Vol. 68 (544) , 165
Envolvente del Centro de Arte Botín en Santander. Estudio de viabilidad de la solución con discos cerámicos roscados sobre chapa de aluminio
El Centro de Arte Botín de Santander presenta una envolvente compleja geométricamente y sofisticada constructivamente de la que destaca su última capa cerámica de reflejos nacarados. Esta capa consiste en un novedoso sistema de anclaje de discos cerámicos a una bandeja de aluminio mediante varilla roscada fijada con resina epoxi. En este artículo se tratan los aspectos de desarrollo técnico y montaje en obra de este cerramiento continuo y se muestran algunos de los resultados de la campaña de ensayos realizada para demostrar la viabilidad de esta capa ante los requerimientos del clima marítimo en Santander.
- 12 December 2016
- Published by Editorial CSIC in Informes de la Construcción
- Vol. 68 (544) , 165
Open AccessEnvolvente del Centro de Arte Botín en Santander. Estudio de viabilidad de la solución con discos cerámicos roscados sobre chapa de aluminio
El Centro de Arte Botín de Santander presenta una envolvente compleja geométricamente y sofisticada constructivamente de la que destaca su última capa cerámica de reflejos nacarados. Esta capa consiste en un novedoso sistema de anclaje de discos cerámicos a una bandeja de aluminio mediante varilla roscada fijada con resina epoxi. En este artículo se tratan los aspectos de desarrollo técnico y montaje en obra de este cerramiento continuo y se muestran algunos de los resultados de la campaña de ensayos realizada para demostrar la viabilidad de esta capa ante los requerimientos del clima marítimo en Santander.