Ibrahim Abdulhamid Al-Akhaly
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ibrahim Abdulhamid Al-Akhaly has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Mohammed Ibrahim El-Anbaawy
Cairo University
2 shared publicationsAbdelmonem Marsas Habtoor
Faculty of Oil and Minerals, Shabwah University, Aden, Yemen
1 shared publication- Adnan A. Barahim
Faculty of Science, Sana’a University, Sana’a, Yemen
1 shared publication Ahmed Hassan Ahmed
Geology Department, Faculty of Science, Helwan University, Cairo, Egypt
1 shared publicationAhmed Mohammed Al-Anweh
Faculty of Sciences and Literature, Amran University and Amran Cement Plant, Amran, Yemen
1 shared publication- Ahmed Mohammed Al-Anweh
Faculty of Sciences and Literatures, Amran University and Amran Cement Plant, Amran, Yemen
1 shared publication
Latest Publications
- Open Access
- 27 April 2025
- Published by Sultan Qaboos University in Sultan Qaboos University Journal For Science
- Vol. 28 (1) , 53-76
Geological Complications and Environmental Hazards of the Cement Raw Materials Quarry Sites in Yemen
Extensive field and site investigations were conducted to assess and evaluate the situation in the presently exploited quarries of cement raw materials in Yemen. These quarries have several geological complications represented mainly by high elevations, steep slopes, rugged topography, heterogeneity in bed thickness, lithologic composition and quality, presence of igneous sills and dykes, intensive fracturing and jointing and abundance of karstification features. Moreover, the processes of quarrying and related operations have several negative environmental impacts the most important of which are soil failure, overburden and land sliding, toppling and rock falls (which result in considerable mass wasting) and emission of dust and noise. Generally, quarrying operations are more hazardous in quarries of gypsum and basement rocks than in those of carbonates and volcanics. Furthermore, the quarries have problems related to the conservation of natural resources. These are represented primarily by the excavation of the valuable agricultural and reclaimed lands and improper exploitation of the cement raw materials and the fresh and underground waters the reserves of which decreased drastically. To deal with the above-mentioned problems, a number of recommendations are outlined. They comprise mitigation measures which must be strictly implemented. Also, it is of almost importance to conduct prospecting for new occurrences of the presently exploited cement raw materials and their possible substitutes as well as additional groundwater resources.
- 27 April 2025
- Published by Sultan Qaboos University in Sultan Qaboos University Journal For Science
- Vol. 28 (1) , 53-76
Open AccessGeological Complications and Environmental Hazards of the Cement Raw Materials Quarry Sites in Yemen
Extensive field and site investigations were conducted to assess and evaluate the situation in the presently exploited quarries of cement raw materials in Yemen. These quarries have several geological complications represented mainly by high elevations, steep slopes, rugged topography, heterogeneity in bed thickness, lithologic composition and quality, presence of igneous sills and dykes, intensive fracturing and jointing and abundance of karstification features. Moreover, the processes of quarrying and related operations have several negative environmental impacts the most important of which are soil failure, overburden and land sliding, toppling and rock falls (which result in considerable mass wasting) and emission of dust and noise. Generally, quarrying operations are more hazardous in quarries of gypsum and basement rocks than in those of carbonates and volcanics. Furthermore, the quarries have problems related to the conservation of natural resources. These are represented primarily by the excavation of the valuable agricultural and reclaimed lands and improper exploitation of the cement raw materials and the fresh and underground waters the reserves of which decreased drastically. To deal with the above-mentioned problems, a number of recommendations are outlined. They comprise mitigation measures which must be strictly implemented. Also, it is of almost importance to conduct prospecting for new occurrences of the presently exploited cement raw materials and their possible substitutes as well as additional groundwater resources.
- 18 January 2023
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 47 (3) , 1527-1546
Influence of Corrective and Additive Raw Materials on Clinker Composition and Cement Properties: A Case Study from Yemen
- 18 January 2023
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 47 (3) , 1527-1546
Influence of Corrective and Additive Raw Materials on Clinker Composition and Cement Properties: A Case Study from Yemen
- 13 July 2022
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 15 (14) , 1-17
Characterization and quality evaluation of cement raw materials and their possible substitutes in Yemen
- 13 July 2022
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 15 (14) , 1-17
Characterization and quality evaluation of cement raw materials and their possible substitutes in Yemen
- 12 March 2022
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 15 (6) , 1-12
Orthopyroxene-magnetite symplectites in gabbro of Gabal Taftafan, western Arabian Shield, Saudi Arabia
- 12 March 2022
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 15 (6) , 1-12
Orthopyroxene-magnetite symplectites in gabbro of Gabal Taftafan, western Arabian Shield, Saudi Arabia
- Open Access
- 9 June 2020
- Published by Sultan Qaboos University in Sultan Qaboos University Journal For Science
- Vol. 25 (1) , 17-25
Distribution of Nutrient Salts and Chlorophyll-a in Surface Water along the Gulf of Aden and Arabian Sea Coast, Yemen
The distribution of inorganic nutrient salts (ammonium, nitrite, nitrate, phosphate and silicate) and phytoplankton chlorophyll-a (Chl-a) were investigated in the Gulf of Aden and along the Arabian Sea coast, Yemen. Seventy two surface water samples were collected during cruises in August 2014 and January 2015. The sampled area extends from As Suqayyah in the west of the Gulf of Aden to Hawf in the east. The study showed that the average values of nutrient salts (μg/l) in waters collected in August 2014 and January 2015 were 0.83 and 0.60, 10.98 and 10.03, 16.41 and 14.73, 10.36 and 8.76, and 29.72 and 22.67 for ammonium, nitrite, nitrate, phosphate and silicate, respectively. The average values of Chl-a (mg/m3) in August 2014 and January 2015 were 0.26 and 0.21, respectively. The results showed that nitrate levels were very high but those of ammonium very low. This may reflect the oxidation of ammonia to nitrite and then nitrate, leading to a very favorable ratio of ammonia and nitrate values. The low levels of dissolved inorganic nitrogen (DIN)compounds, (ammonium, nitrite, and nitrate), phosphate, silicate and Chl-a indicated that the southern coast of Yemen is not in a eutrophic condition. The highest nutrient salt values were in the eastern part of the study area, and may have resulted from water originating from the Indian Ocean and upwelling. Statistical analysis to seek correlations between nutrient salts and Chl-a show very good to excellent correlation, which may be due toconstant coastal environment.
- 9 June 2020
- Published by Sultan Qaboos University in Sultan Qaboos University Journal For Science
- Vol. 25 (1) , 17-25
Open AccessDistribution of Nutrient Salts and Chlorophyll-a in Surface Water along the Gulf of Aden and Arabian Sea Coast, Yemen
The distribution of inorganic nutrient salts (ammonium, nitrite, nitrate, phosphate and silicate) and phytoplankton chlorophyll-a (Chl-a) were investigated in the Gulf of Aden and along the Arabian Sea coast, Yemen. Seventy two surface water samples were collected during cruises in August 2014 and January 2015. The sampled area extends from As Suqayyah in the west of the Gulf of Aden to Hawf in the east. The study showed that the average values of nutrient salts (μg/l) in waters collected in August 2014 and January 2015 were 0.83 and 0.60, 10.98 and 10.03, 16.41 and 14.73, 10.36 and 8.76, and 29.72 and 22.67 for ammonium, nitrite, nitrate, phosphate and silicate, respectively. The average values of Chl-a (mg/m3) in August 2014 and January 2015 were 0.26 and 0.21, respectively. The results showed that nitrate levels were very high but those of ammonium very low. This may reflect the oxidation of ammonia to nitrite and then nitrate, leading to a very favorable ratio of ammonia and nitrate values. The low levels of dissolved inorganic nitrogen (DIN)compounds, (ammonium, nitrite, and nitrate), phosphate, silicate and Chl-a indicated that the southern coast of Yemen is not in a eutrophic condition. The highest nutrient salt values were in the eastern part of the study area, and may have resulted from water originating from the Indian Ocean and upwelling. Statistical analysis to seek correlations between nutrient salts and Chl-a show very good to excellent correlation, which may be due toconstant coastal environment.
- Open Access
- 21 May 2019
- Published by Sultan Qaboos University in Sultan Qaboos University Journal For Science
- Vol. 24 (1) , 47-56
Petroleum Hydrocarbon Residues in Surficial Sediment Samples from Aden City Coasts, Yemen
The environmental quality along Aden coasts is affected by the anthropogenic pressure of Aden city. Field work has been carried out to investigate the occurrence of petroleum pollution along these coasts. To determine the status of aliphatic hydrocarbon (AH) (n-C10 to n-C34) and polycyclic aromatic hydrocarbon (PAH) pollution in surface sediments, twenty seven surface sediment samples were collected in July and December 2014 and March 2015 and analysed for AHs and PAHs by using gas chromatography–mass spectrometry (GC-MS) to determine their levels and sources. Concentrations of AHs ranged from 6.25 µg/g at station 5 (Goldmoor) to 41.05 µg/g at station 7 (Al Ghadir coast) with an average of 16.49 µg/g. Concentrations of PAHs were in the range between 0.37 µg/g at station 5 (Goldmoor) and 16.30 µg/g at station 9 (Oil Harbor) with an average of 7.38 µg/g. The study showed that the levels of petroleum hydrocarbons (PHs) in coastal sediments are low and within the allowed limits. The major sources of the pollution were petrogenic in origin, based on the indices of AHs and PAHs. This pollution is a result of localized oil operations and/or heavy ship traffic in the Gulf of Aden. The results will be used to assess the ecosystem quality. Environmental control is recommended to reduce the marine pollution of Aden coasts.
- 21 May 2019
- Published by Sultan Qaboos University in Sultan Qaboos University Journal For Science
- Vol. 24 (1) , 47-56
Open AccessPetroleum Hydrocarbon Residues in Surficial Sediment Samples from Aden City Coasts, Yemen
The environmental quality along Aden coasts is affected by the anthropogenic pressure of Aden city. Field work has been carried out to investigate the occurrence of petroleum pollution along these coasts. To determine the status of aliphatic hydrocarbon (AH) (n-C10 to n-C34) and polycyclic aromatic hydrocarbon (PAH) pollution in surface sediments, twenty seven surface sediment samples were collected in July and December 2014 and March 2015 and analysed for AHs and PAHs by using gas chromatography–mass spectrometry (GC-MS) to determine their levels and sources. Concentrations of AHs ranged from 6.25 µg/g at station 5 (Goldmoor) to 41.05 µg/g at station 7 (Al Ghadir coast) with an average of 16.49 µg/g. Concentrations of PAHs were in the range between 0.37 µg/g at station 5 (Goldmoor) and 16.30 µg/g at station 9 (Oil Harbor) with an average of 7.38 µg/g. The study showed that the levels of petroleum hydrocarbons (PHs) in coastal sediments are low and within the allowed limits. The major sources of the pollution were petrogenic in origin, based on the indices of AHs and PAHs. This pollution is a result of localized oil operations and/or heavy ship traffic in the Gulf of Aden. The results will be used to assess the ecosystem quality. Environmental control is recommended to reduce the marine pollution of Aden coasts.
- Open Access
- 30 December 2018
- Published by Sultan Qaboos University in Sultan Qaboos University Journal For Science
- Vol. 23 (2) , 111-119
Preliminary Assessment of Utilization of Al-Jaif Scoria (NW Sana’a, Yemen) for Cement Production
This paper presents the results of investigations on the potential industrial utilization of scoria, collected from Al-Jaif quarry, NW Sana'a, Yemen as a cement additive. Scoria was chosen as a cement additive material due to its availability and low cost from the Sana’a-Amran volcanic field in Yemen. The chemical composition of scoria was determined by X-ray fluorescence (XRF). The studied scoria is mainly composed of volcanic glass with a few zeolites (e.g. clinoptilolite) as revealed from petrographic investigation and X-ray diffraction (XRD). The scoria was added to the clinker in the range of 2, 4, 6, 8, 10 and 12% by weight. The fineness, surface area, water demand, setting time and compressive strength were conducted on scoria blended cement. According to experimental results, the high volcanic glass allows the addition of up to 12% scoria to the clinker to maintain a good potential of manufacturing blended cement. The results satisfy the European Standard EN requirements and confirm the viability of using scoria as a cement additive.
- 30 December 2018
- Published by Sultan Qaboos University in Sultan Qaboos University Journal For Science
- Vol. 23 (2) , 111-119
Open AccessPreliminary Assessment of Utilization of Al-Jaif Scoria (NW Sana’a, Yemen) for Cement Production
This paper presents the results of investigations on the potential industrial utilization of scoria, collected from Al-Jaif quarry, NW Sana'a, Yemen as a cement additive. Scoria was chosen as a cement additive material due to its availability and low cost from the Sana’a-Amran volcanic field in Yemen. The chemical composition of scoria was determined by X-ray fluorescence (XRF). The studied scoria is mainly composed of volcanic glass with a few zeolites (e.g. clinoptilolite) as revealed from petrographic investigation and X-ray diffraction (XRD). The scoria was added to the clinker in the range of 2, 4, 6, 8, 10 and 12% by weight. The fineness, surface area, water demand, setting time and compressive strength were conducted on scoria blended cement. According to experimental results, the high volcanic glass allows the addition of up to 12% scoria to the clinker to maintain a good potential of manufacturing blended cement. The results satisfy the European Standard EN requirements and confirm the viability of using scoria as a cement additive.
- 15 December 2018
- Published by Jeoloji Muhendisligi Dergisi in Jeoloji Mühendisliği Dergisi
- Vol. 42 (2) , 159-174
Engineering Properties of Basalt Coarse Aggregates in Hamdan Area, NW Sana’a, Yemen
Sana’a city has been growing fast vertically and horizontally to provide housing, business and other facilities to the ever in. This work was undertaken to determine the quality of basalt coarse aggregate in Hamdan area, NW Sana’a. It included field work which consisted of collection of basalt aggregate samples and hand specimens. The study covered coarse aggregates from one of the main crushers in the vicinity of Sana’a city, about 12 km NW of Sana’a. The objective of this study is to determine the physical and mechanical properties of basalt coarse aggregates and comparison of the results with the standards. Chemical composition of basalt was determined by the X-ray fluorescence (XRF). The thin sections show that the studied basalt is mainly composed of calcic plagioclase and augite with few olivine. The types of testing required are gradation, specific gravity, water absorption, flakiness and elongation, Los Angeles abrasion value, aggregate impact value soundness and alkali-silica reactivity. The results showed that, the basalt coarse aggregates in Hamdan area comply with the international standards.
- 15 December 2018
- Published by Jeoloji Muhendisligi Dergisi in Jeoloji Mühendisliği Dergisi
- Vol. 42 (2) , 159-174
Engineering Properties of Basalt Coarse Aggregates in Hamdan Area, NW Sana’a, Yemen
Sana’a city has been growing fast vertically and horizontally to provide housing, business and other facilities to the ever in. This work was undertaken to determine the quality of basalt coarse aggregate in Hamdan area, NW Sana’a. It included field work which consisted of collection of basalt aggregate samples and hand specimens. The study covered coarse aggregates from one of the main crushers in the vicinity of Sana’a city, about 12 km NW of Sana’a. The objective of this study is to determine the physical and mechanical properties of basalt coarse aggregates and comparison of the results with the standards. Chemical composition of basalt was determined by the X-ray fluorescence (XRF). The thin sections show that the studied basalt is mainly composed of calcic plagioclase and augite with few olivine. The types of testing required are gradation, specific gravity, water absorption, flakiness and elongation, Los Angeles abrasion value, aggregate impact value soundness and alkali-silica reactivity. The results showed that, the basalt coarse aggregates in Hamdan area comply with the international standards.
- Open Access
- 28 January 2018
- Published by Sultan Qaboos University in Sultan Qaboos University Journal For Science
- Vol. 22 (2) , 81-88
Engineering Properties of Volcanic Tuff from the Western Part of Yemen
This paper deals with a study of the physical and mechanical characteristics of volcanic tuff and ignimbrite from six quarries located at different areas in the western part of Yemen (Manakha, Jahran, Bakhran, Dar Al-Hanash, Abaser and Soraifa). In the region, volcanic tuffs and ignimbrite are locally known by their location names and have been used as solid masonry and cladding stones. All the investigated pyroclastic rocks belong to the Tertiary volcanic. The standard physical and mechanical tests (void ratio, porosity, density, specific gravity, water absorption, uniaxial compressive strength and tensile strength) were carried out on the tuff and ignimbrite samples collected from different parts of the region. Laboratory tests revealed that the void ratio average values range between 0.12 and 0.37, the porosity ranges between 10.57 and 27.12%, the dry density ranges between 1.66 and 2.25 gm/cm3, specific gravity ranges from 1.45 to 1.94, and water absorption ranges from 4.69 to 16.39%. The measured uniaxial compressive strength values range from 24 to 68 MPa, and the tensile strength values range between 4 and 10 MPa. These tuffs and ignimbrites generally are light green, gray, beige, or yellowish in color. With these colors they are favoured for building, coating and decorative stone. This paper concludes that the studied stones have acceptable to good properties as dimension stone. Jahrani and Manakhi tuffs are the best quality, whereas Hanashi ignimbrite is of poorer quality.
- 28 January 2018
- Published by Sultan Qaboos University in Sultan Qaboos University Journal For Science
- Vol. 22 (2) , 81-88
Open AccessEngineering Properties of Volcanic Tuff from the Western Part of Yemen
This paper deals with a study of the physical and mechanical characteristics of volcanic tuff and ignimbrite from six quarries located at different areas in the western part of Yemen (Manakha, Jahran, Bakhran, Dar Al-Hanash, Abaser and Soraifa). In the region, volcanic tuffs and ignimbrite are locally known by their location names and have been used as solid masonry and cladding stones. All the investigated pyroclastic rocks belong to the Tertiary volcanic. The standard physical and mechanical tests (void ratio, porosity, density, specific gravity, water absorption, uniaxial compressive strength and tensile strength) were carried out on the tuff and ignimbrite samples collected from different parts of the region. Laboratory tests revealed that the void ratio average values range between 0.12 and 0.37, the porosity ranges between 10.57 and 27.12%, the dry density ranges between 1.66 and 2.25 gm/cm3, specific gravity ranges from 1.45 to 1.94, and water absorption ranges from 4.69 to 16.39%. The measured uniaxial compressive strength values range from 24 to 68 MPa, and the tensile strength values range between 4 and 10 MPa. These tuffs and ignimbrites generally are light green, gray, beige, or yellowish in color. With these colors they are favoured for building, coating and decorative stone. This paper concludes that the studied stones have acceptable to good properties as dimension stone. Jahrani and Manakhi tuffs are the best quality, whereas Hanashi ignimbrite is of poorer quality.