Peter Sørensen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Peter Sørensen has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Stefan McKinnon Edwards
Center for Quantitative Genetics and Genomics, Department of Molecular Biology and Genetics, Aarhus University, Tjele, Denmark
3 shared publications - Albert Johannes Buitenhuis
Center for Quantitative Genetics and Genomics, https://dx.doi.org/1006Aarhus University, C. F. Møllers Allé 3, 8000 Aarhus C, Denmark
2 shared publications - Bo Thomsen
Department of Molecular Biology and Genetics, Aarhus University, 8000 Aarhus, Denmark
2 shared publications - Goutam Sahana
Center for Quantitative Genetics and Genomics, Aarhus University, Aarhus, Denmark
2 shared publications - Guosheng Su
Center for Quantitative Genetics and Genomics, Aarhus University, 8830 Tjele, Denmark
2 shared publications - Lingzhao Fang
Center for Quantitative Genetics and Genomics Aarhus University Aarhus Denmark
2 shared publications
Latest Publications
- Open Access
- 29 May 2019
- Published by Springer Nature in Genetics Selection Evolution
- Vol. 51 (1) , 1-8
Impact of the rumen microbiome on milk fatty acid composition of Holstein cattle
Fatty acids (FA) in bovine milk derive through body mobilization, de novo synthesis or from the feed via the blood stream. To be able to digest feedstuff, the cow depends on its rumen microbiome. The relative abundance of the microbes has been shown to differ between cows. To date, there is little information on the impact of the microbiome on the formation of specific milk FA. Therefore, in this study, our aim was to investigate the impact of the rumen bacterial microbiome on milk FA composition. Furthermore, we evaluated the predictive value of the rumen microbiome and the host genetics on the composition of individual FA in milk. Our results show that the proportion of variance explained by the rumen bacteria composition (termed microbiability or $$h_{B}^{2}$$ ) was generally smaller than that of the genetic component (heritability), and that rumen bacteria influenced most C15:0, C17:0, C18:2 n-6, C18:3 n-3 and CLA cis-9, trans-11 with estimated $$h_{B}^{2}$$ ranging from 0.26 to 0.42. For C6:0, C8:0, C10:0, C12:0, C16:0, C16:1 cis-9 and C18:1 cis-9, the variance explained by the rumen bacteria component was close to 0. In general, both the rumen microbiome and the host genetics had little value for predicting FA phenotype. Compared to genetic information only, adding rumen bacteria information resulted in a significant improvement of the predictive value for C15:0 from 0.22 to 0.38 (P = 9.50e−07) and C18:3 n-3 from 0 to 0.29 (P = 8.81e−18). The rumen microbiome has a pronounced influence on the content of odd chain FA and polyunsaturated C18 FA, and to a lesser extent, on the content of the short- and medium-chain FA in the milk of Holstein cattle. The accuracy of prediction of FA phenotypes in milk based on information from either the animal’s genotypes or rumen bacteria composition was very low.- 29 May 2019
- Published by Springer Nature in Genetics Selection Evolution
- Vol. 51 (1) , 1-8
Open AccessImpact of the rumen microbiome on milk fatty acid composition of Holstein cattle
Fatty acids (FA) in bovine milk derive through body mobilization, de novo synthesis or from the feed via the blood stream. To be able to digest feedstuff, the cow depends on its rumen microbiome. The relative abundance of the microbes has been shown to differ between cows. To date, there is little information on the impact of the microbiome on the formation of specific milk FA. Therefore, in this study, our aim was to investigate the impact of the rumen bacterial microbiome on milk FA composition. Furthermore, we evaluated the predictive value of the rumen microbiome and the host genetics on the composition of individual FA in milk. Our results show that the proportion of variance explained by the rumen bacteria composition (termed microbiability or $$h_{B}^{2}$$ ) was generally smaller than that of the genetic component (heritability), and that rumen bacteria influenced most C15:0, C17:0, C18:2 n-6, C18:3 n-3 and CLA cis-9, trans-11 with estimated $$h_{B}^{2}$$ ranging from 0.26 to 0.42. For C6:0, C8:0, C10:0, C12:0, C16:0, C16:1 cis-9 and C18:1 cis-9, the variance explained by the rumen bacteria component was close to 0. In general, both the rumen microbiome and the host genetics had little value for predicting FA phenotype. Compared to genetic information only, adding rumen bacteria information resulted in a significant improvement of the predictive value for C15:0 from 0.22 to 0.38 (P = 9.50e−07) and C18:3 n-3 from 0 to 0.29 (P = 8.81e−18). The rumen microbiome has a pronounced influence on the content of odd chain FA and polyunsaturated C18 FA, and to a lesser extent, on the content of the short- and medium-chain FA in the milk of Holstein cattle. The accuracy of prediction of FA phenotypes in milk based on information from either the animal’s genotypes or rumen bacteria composition was very low. - Open Access
qgg: an R package for large-scale quantitative genetic analyses
Summary: Studies of complex traits and diseases are strongly dependent on the availability of user-friendly software designed to handle large-scale genetic and phenotypic data. Here, we present the R package qgg , which provides an environment for large-scale genetic analyses of quantitative traits and disease phenotypes. The qgg package provides an infrastructure for efficient processing of large-scale genetic data and functions for estimating genetic parameters, performing single and multiple marker association analyses, and genomic-based predictions of phenotypes. In particular, we have developed novel predictive models that use information on functional features of the genome that enables more accurate predictions of complex trait phenotypes. We illustrates core facilities of the qgg package by analysing human standing height from the UK Biobank. Availability and implementation: The R package qgg is freely available. For latest updates, user guides and example scripts, consult the main page http://psoerensen.github.io/qgg/ .
Open Accessqgg: an R package for large-scale quantitative genetic analyses
Summary: Studies of complex traits and diseases are strongly dependent on the availability of user-friendly software designed to handle large-scale genetic and phenotypic data. Here, we present the R package qgg , which provides an environment for large-scale genetic analyses of quantitative traits and disease phenotypes. The qgg package provides an infrastructure for efficient processing of large-scale genetic data and functions for estimating genetic parameters, performing single and multiple marker association analyses, and genomic-based predictions of phenotypes. In particular, we have developed novel predictive models that use information on functional features of the genome that enables more accurate predictions of complex trait phenotypes. We illustrates core facilities of the qgg package by analysing human standing height from the UK Biobank. Availability and implementation: The R package qgg is freely available. For latest updates, user guides and example scripts, consult the main page http://psoerensen.github.io/qgg/ .
- Open Access
- 6 August 2018
- Published by Springer Nature in Genetics Selection Evolution
- Vol. 50 (1) , 41
Understanding the potential bias of variance components estimators when using genomic models
Genomic models that link phenotypes to dense genotype information are increasingly being used for infering variance parameters in genetics studies. The variance parameters of these models can be inferred using restricted maximum likelihood, which produces consistent, asymptotically normal estimates of variance components under the true model. These properties are not guaranteed to hold when the covariance structure of the data specified by the genomic model differs substantially from the covariance structure specified by the true model, and in this case, the likelihood of the model is said to be misspecified. If the covariance structure specified by the genomic model provides a poor description of that specified by the true model, the likelihood misspecification may lead to incorrect inferences. This work provides a theoretical analysis of the genomic models based on splitting the misspecified likelihood equations into components, which isolate those that contribute to incorrect inferences, providing an informative measure, defined as $$\varvec{\kappa }$$ κ , to compare the covariance structure of the data specified by the genomic and the true models. This comparison of the covariance structures allows us to determine whether or not bias in the variance components estimates is expected to occur. The theory presented can be used to provide an explanation for the success of a number of recently reported approaches that are suggested to remove sources of bias of heritability estimates. Furthermore, however complex is the quantification of this bias, we can determine that, in genomic models that consider a single genomic component to estimate heritability (assuming SNP effects are all i.i.d.), the bias of the estimator tends to be downward, when it exists.- 6 August 2018
- Published by Springer Nature in Genetics Selection Evolution
- Vol. 50 (1) , 41
Open AccessUnderstanding the potential bias of variance components estimators when using genomic models
Genomic models that link phenotypes to dense genotype information are increasingly being used for infering variance parameters in genetics studies. The variance parameters of these models can be inferred using restricted maximum likelihood, which produces consistent, asymptotically normal estimates of variance components under the true model. These properties are not guaranteed to hold when the covariance structure of the data specified by the genomic model differs substantially from the covariance structure specified by the true model, and in this case, the likelihood of the model is said to be misspecified. If the covariance structure specified by the genomic model provides a poor description of that specified by the true model, the likelihood misspecification may lead to incorrect inferences. This work provides a theoretical analysis of the genomic models based on splitting the misspecified likelihood equations into components, which isolate those that contribute to incorrect inferences, providing an informative measure, defined as $$\varvec{\kappa }$$ κ , to compare the covariance structure of the data specified by the genomic and the true models. This comparison of the covariance structures allows us to determine whether or not bias in the variance components estimates is expected to occur. The theory presented can be used to provide an explanation for the success of a number of recently reported approaches that are suggested to remove sources of bias of heritability estimates. Furthermore, however complex is the quantification of this bias, we can determine that, in genomic models that consider a single genomic component to estimate heritability (assuming SNP effects are all i.i.d.), the bias of the estimator tends to be downward, when it exists. - Open Access
- 10 August 2017
- Published by Springer Nature in BMC Genomics
- Vol. 18 (1) , 1-12
Use of biological priors enhances understanding of genetic architecture and genomic prediction of complex traits within and between dairy cattle breeds
A better understanding of the genetic architecture underlying complex traits (e.g., the distribution of causal variants and their effects) may aid in the genomic prediction. Here, we hypothesized that the genomic variants of complex traits might be enriched in a subset of genomic regions defined by genes grouped on the basis of “Gene Ontology” (GO), and that incorporating this independent biological information into genomic prediction models might improve their predictive ability. Four complex traits (i.e., milk, fat and protein yields, and mastitis) together with imputed sequence variants in Holstein (HOL) and Jersey (JER) cattle were analysed. We first carried out a post-GWAS analysis in a HOL training population to assess the degree of enrichment of the association signals in the gene regions defined by each GO term. We then extended the genomic best linear unbiased prediction model (GBLUP) to a genomic feature BLUP (GFBLUP) model, including an additional genomic effect quantifying the joint effect of a group of variants located in a genomic feature. The GBLUP model using a single random effect assumes that all genomic variants contribute to the genomic relationship equally, whereas GFBLUP attributes different weights to the individual genomic relationships in the prediction equation based on the estimated genomic parameters. Our results demonstrate that the immune-relevant GO terms were more associated with mastitis than milk production, and several biologically meaningful GO terms improved the prediction accuracy with GFBLUP for the four traits, as compared with GBLUP. The improvement of the genomic prediction between breeds (the average increase across the four traits was 0.161) was more apparent than that it was within the HOL (the average increase across the four traits was 0.020). Our genomic feature modelling approaches provide a framework to simultaneously explore the genetic architecture and genomic prediction of complex traits by taking advantage of independent biological knowledge.
- 10 August 2017
- Published by Springer Nature in BMC Genomics
- Vol. 18 (1) , 1-12
Open AccessUse of biological priors enhances understanding of genetic architecture and genomic prediction of complex traits within and between dairy cattle breeds
A better understanding of the genetic architecture underlying complex traits (e.g., the distribution of causal variants and their effects) may aid in the genomic prediction. Here, we hypothesized that the genomic variants of complex traits might be enriched in a subset of genomic regions defined by genes grouped on the basis of “Gene Ontology” (GO), and that incorporating this independent biological information into genomic prediction models might improve their predictive ability. Four complex traits (i.e., milk, fat and protein yields, and mastitis) together with imputed sequence variants in Holstein (HOL) and Jersey (JER) cattle were analysed. We first carried out a post-GWAS analysis in a HOL training population to assess the degree of enrichment of the association signals in the gene regions defined by each GO term. We then extended the genomic best linear unbiased prediction model (GBLUP) to a genomic feature BLUP (GFBLUP) model, including an additional genomic effect quantifying the joint effect of a group of variants located in a genomic feature. The GBLUP model using a single random effect assumes that all genomic variants contribute to the genomic relationship equally, whereas GFBLUP attributes different weights to the individual genomic relationships in the prediction equation based on the estimated genomic parameters. Our results demonstrate that the immune-relevant GO terms were more associated with mastitis than milk production, and several biologically meaningful GO terms improved the prediction accuracy with GFBLUP for the four traits, as compared with GBLUP. The improvement of the genomic prediction between breeds (the average increase across the four traits was 0.161) was more apparent than that it was within the HOL (the average increase across the four traits was 0.020). Our genomic feature modelling approaches provide a framework to simultaneously explore the genetic architecture and genomic prediction of complex traits by taking advantage of independent biological knowledge.
- Open Access
- 12 May 2017
- Published by Springer Nature in Genetics Selection Evolution
- Vol. 49 (1) , 1-18
Exploring the genetic architecture and improving genomic prediction accuracy for mastitis and milk production traits in dairy cattle by mapping variants to hepatic transcriptomic regions responsive to intra-mammary infection
A better understanding of the genetic architecture of complex traits can contribute to improve genomic prediction. We hypothesized that genomic variants associated with mastitis and milk production traits in dairy cattle are enriched in hepatic transcriptomic regions that are responsive to intra-mammary infection (IMI). Genomic markers [e.g. single nucleotide polymorphisms (SNPs)] from those regions, if included, may improve the predictive ability of a genomic model. We applied a genomic feature best linear unbiased prediction model (GFBLUP) to implement the above strategy by considering the hepatic transcriptomic regions responsive to IMI as genomic features. GFBLUP, an extension of GBLUP, includes a separate genomic effect of SNPs within a genomic feature, and allows differential weighting of the individual marker relationships in the prediction equation. Since GFBLUP is computationally intensive, we investigated whether a SNP set test could be a computationally fast way to preselect predictive genomic features. The SNP set test assesses the association between a genomic feature and a trait based on single-SNP genome-wide association studies. We applied these two approaches to mastitis and milk production traits (milk, fat and protein yield) in Holstein (HOL, n = 5056) and Jersey (JER, n = 1231) cattle. We observed that a majority of genomic features were enriched in genomic variants that were associated with mastitis and milk production traits. Compared to GBLUP, the accuracy of genomic prediction with GFBLUP was marginally improved (3.2 to 3.9%) in within-breed prediction. The highest increase (164.4%) in prediction accuracy was observed in across-breed prediction. The significance of genomic features based on the SNP set test were correlated with changes in prediction accuracy of GFBLUP (P < 0.05). GFBLUP provides a framework for integrating multiple layers of biological knowledge to provide novel insights into the biological basis of complex traits, and to improve the accuracy of genomic prediction. The SNP set test might be used as a first-step to improve GFBLUP models. Approaches like GFBLUP and SNP set test will become increasingly useful, as the functional annotations of genomes keep accumulating for a range of species and traits.
- 12 May 2017
- Published by Springer Nature in Genetics Selection Evolution
- Vol. 49 (1) , 1-18
Open AccessExploring the genetic architecture and improving genomic prediction accuracy for mastitis and milk production traits in dairy cattle by mapping variants to hepatic transcriptomic regions responsive to intra-mammary infection
A better understanding of the genetic architecture of complex traits can contribute to improve genomic prediction. We hypothesized that genomic variants associated with mastitis and milk production traits in dairy cattle are enriched in hepatic transcriptomic regions that are responsive to intra-mammary infection (IMI). Genomic markers [e.g. single nucleotide polymorphisms (SNPs)] from those regions, if included, may improve the predictive ability of a genomic model. We applied a genomic feature best linear unbiased prediction model (GFBLUP) to implement the above strategy by considering the hepatic transcriptomic regions responsive to IMI as genomic features. GFBLUP, an extension of GBLUP, includes a separate genomic effect of SNPs within a genomic feature, and allows differential weighting of the individual marker relationships in the prediction equation. Since GFBLUP is computationally intensive, we investigated whether a SNP set test could be a computationally fast way to preselect predictive genomic features. The SNP set test assesses the association between a genomic feature and a trait based on single-SNP genome-wide association studies. We applied these two approaches to mastitis and milk production traits (milk, fat and protein yield) in Holstein (HOL, n = 5056) and Jersey (JER, n = 1231) cattle. We observed that a majority of genomic features were enriched in genomic variants that were associated with mastitis and milk production traits. Compared to GBLUP, the accuracy of genomic prediction with GFBLUP was marginally improved (3.2 to 3.9%) in within-breed prediction. The highest increase (164.4%) in prediction accuracy was observed in across-breed prediction. The significance of genomic features based on the SNP set test were correlated with changes in prediction accuracy of GFBLUP (P < 0.05). GFBLUP provides a framework for integrating multiple layers of biological knowledge to provide novel insights into the biological basis of complex traits, and to improve the accuracy of genomic prediction. The SNP set test might be used as a first-step to improve GFBLUP models. Approaches like GFBLUP and SNP set test will become increasingly useful, as the functional annotations of genomes keep accumulating for a range of species and traits.
- Open Access
- 1 August 2016
- Published by Oxford University Press (OUP) in Genetics
- Vol. 203 (4) , 1871-1883
Genomic Prediction for Quantitative Traits Is Improved by Mapping Variants to Gene Ontology Categories inDrosophila melanogaster
Predicting individual quantitative trait phenotypes from high-resolution genomic polymorphism data is important for personalized medicine in humans, plant and animal breeding, and adaptive evolution. However, this is difficult for populations of unrelated individuals when the number of causal variants is low relative to the total number of polymorphisms and causal variants individually have small effects on the traits. We hypothesized that mapping molecular polymorphisms to genomic features such as genes and their gene ontology categories could increase the accuracy of genomic prediction models. We developed a genomic feature best linear unbiased prediction (GFBLUP) model that implements this strategy and applied it to three quantitative traits (startle response, starvation resistance, and chill coma recovery) in the unrelated, sequenced inbred lines of the Drosophila melanogaster Genetic Reference Panel. Our results indicate that subsetting markers based on genomic features increases the predictive ability relative to the standard genomic best linear unbiased prediction (GBLUP) model. Both models use all markers, but GFBLUP allows differential weighting of the individual genetic marker relationships, whereas GBLUP weighs the genetic marker relationships equally. Simulation studies show that it is possible to further increase the accuracy of genomic prediction for complex traits using this model, provided the genomic features are enriched for causal variants. Our GFBLUP model using prior information on genomic features enriched for causal variants can increase the accuracy of genomic predictions in populations of unrelated individuals and provides a formal statistical framework for leveraging and evaluating information across multiple experimental studies to provide novel insights into the genetic architecture of complex traits.
- 1 August 2016
- Published by Oxford University Press (OUP) in Genetics
- Vol. 203 (4) , 1871-1883
Open AccessGenomic Prediction for Quantitative Traits Is Improved by Mapping Variants to Gene Ontology Categories inDrosophila melanogaster
Predicting individual quantitative trait phenotypes from high-resolution genomic polymorphism data is important for personalized medicine in humans, plant and animal breeding, and adaptive evolution. However, this is difficult for populations of unrelated individuals when the number of causal variants is low relative to the total number of polymorphisms and causal variants individually have small effects on the traits. We hypothesized that mapping molecular polymorphisms to genomic features such as genes and their gene ontology categories could increase the accuracy of genomic prediction models. We developed a genomic feature best linear unbiased prediction (GFBLUP) model that implements this strategy and applied it to three quantitative traits (startle response, starvation resistance, and chill coma recovery) in the unrelated, sequenced inbred lines of the Drosophila melanogaster Genetic Reference Panel. Our results indicate that subsetting markers based on genomic features increases the predictive ability relative to the standard genomic best linear unbiased prediction (GBLUP) model. Both models use all markers, but GFBLUP allows differential weighting of the individual genetic marker relationships, whereas GBLUP weighs the genetic marker relationships equally. Simulation studies show that it is possible to further increase the accuracy of genomic prediction for complex traits using this model, provided the genomic features are enriched for causal variants. Our GFBLUP model using prior information on genomic features enriched for causal variants can increase the accuracy of genomic predictions in populations of unrelated individuals and provides a formal statistical framework for leveraging and evaluating information across multiple experimental studies to provide novel insights into the genetic architecture of complex traits.
- Open Access
- 14 July 2016
- Published by Wiley in Journal of Animal Breeding and Genetics
- Vol. 133 (4) , 249-250
ICQG 5 on Madison's Isthmus links genomics and statistics of complex traits
- 14 July 2016
- Published by Wiley in Journal of Animal Breeding and Genetics
- Vol. 133 (4) , 249-250
Open AccessICQG 5 on Madison's Isthmus links genomics and statistics of complex traits
- Open Access
- 5 January 2016
- Published by Springer Nature in BMC Genomic Data
- Vol. 17 (1) , 1-16
Increased prediction accuracy using a genomic feature model including prior information on quantitative trait locus regions in purebred Danish Duroc pigs
In animal breeding, genetic variance for complex traits is often estimated using linear mixed models that incorporate information from single nucleotide polymorphism (SNP) markers using a realized genomic relationship matrix. In such models, individual genetic markers are weighted equally and genomic variation is treated as a “black box.” This approach is useful for selecting animals with high genetic potential, but it does not generate or utilise knowledge of the biological mechanisms underlying trait variation. Here we propose a linear mixed-model approach that can evaluate the collective effects of sets of SNPs and thereby open the “black box.” The described genomic feature best linear unbiased prediction (GFBLUP) model has two components that are defined by genomic features. We analysed data on average daily gain, feed efficiency, and lean meat percentage from 3,085 Duroc boars, along with genotypes from a 60 K SNP chip. In addition information on known quantitative trait loci (QTL) from the animal QTL database was integrated in the GFBLUP as a genomic feature. Our results showed that the most significant QTL categories were indeed biologically meaningful. Additionally, for high heritability traits, prediction accuracy was improved by the incorporation of biological knowledge in prediction models. A simulation study using the real genotypes and simulated phenotypes demonstrated challenges regarding detection of causal variants in low to medium heritability traits. The GFBLUP model showed increased predictive ability when enough causal variants were included in the genomic feature to explain over 10 % of the genomic variance, and when dilution by non-causal markers was minimal. In the observed data set, predictive ability was increased by the inclusion of prior QTL information obtained outside the training data set, but only for the trait with highest heritability.
- 5 January 2016
- Published by Springer Nature in BMC Genomic Data
- Vol. 17 (1) , 1-16
Open AccessIncreased prediction accuracy using a genomic feature model including prior information on quantitative trait locus regions in purebred Danish Duroc pigs
In animal breeding, genetic variance for complex traits is often estimated using linear mixed models that incorporate information from single nucleotide polymorphism (SNP) markers using a realized genomic relationship matrix. In such models, individual genetic markers are weighted equally and genomic variation is treated as a “black box.” This approach is useful for selecting animals with high genetic potential, but it does not generate or utilise knowledge of the biological mechanisms underlying trait variation. Here we propose a linear mixed-model approach that can evaluate the collective effects of sets of SNPs and thereby open the “black box.” The described genomic feature best linear unbiased prediction (GFBLUP) model has two components that are defined by genomic features. We analysed data on average daily gain, feed efficiency, and lean meat percentage from 3,085 Duroc boars, along with genotypes from a 60 K SNP chip. In addition information on known quantitative trait loci (QTL) from the animal QTL database was integrated in the GFBLUP as a genomic feature. Our results showed that the most significant QTL categories were indeed biologically meaningful. Additionally, for high heritability traits, prediction accuracy was improved by the incorporation of biological knowledge in prediction models. A simulation study using the real genotypes and simulated phenotypes demonstrated challenges regarding detection of causal variants in low to medium heritability traits. The GFBLUP model showed increased predictive ability when enough causal variants were included in the genomic feature to explain over 10 % of the genomic variance, and when dilution by non-causal markers was minimal. In the observed data set, predictive ability was increased by the inclusion of prior QTL information obtained outside the training data set, but only for the trait with highest heritability.
- Open Access
- 14 July 2015
- Published by Springer Nature in Genetics Selection Evolution
- Vol. 47 (1) , 60
Partitioning of genomic variance reveals biological pathways associated with udder health and milk production traits in dairy cattle
We have used a linear mixed model (LMM) approach to examine the joint contribution of genetic markers associated with a biological pathway. However, with these markers being scattered throughout the genome, we are faced with the challenge of modelling the contribution from several, sometimes even all, chromosomes at once. Due to linkage disequilibrium (LD), all markers may be assumed to account for some genomic variance; but the question is whether random sets of markers account for the same genomic variance as markers associated with a biological pathway? We applied the LMM approach to identify biological pathways associated with udder health and milk production traits in dairy cattle. A random gene sampling procedure was applied to assess the biological pathways in a dataset that has an inherently complex genetic correlation pattern due to the population structure of dairy cattle, and to linkage disequilibrium within the bovine genome and within the genes associated to the biological pathway. Several biological pathways that were significantly associated with health and production traits were identified in dairy cattle; i.e. the markers linked to these pathways explained more of the genomic variance and provided a better model fit than 95 % of the randomly sampled gene groups. Our results show that immune related pathways are associated with production traits, and that pathways that include a causal marker for production traits are identified with our procedure. We are confident that the LMM approach provides a general framework to exploit and integrate prior biological information and could potentially lead to improved understanding of the genetic architecture of complex traits and diseases.
- 14 July 2015
- Published by Springer Nature in Genetics Selection Evolution
- Vol. 47 (1) , 60
Open AccessPartitioning of genomic variance reveals biological pathways associated with udder health and milk production traits in dairy cattle
We have used a linear mixed model (LMM) approach to examine the joint contribution of genetic markers associated with a biological pathway. However, with these markers being scattered throughout the genome, we are faced with the challenge of modelling the contribution from several, sometimes even all, chromosomes at once. Due to linkage disequilibrium (LD), all markers may be assumed to account for some genomic variance; but the question is whether random sets of markers account for the same genomic variance as markers associated with a biological pathway? We applied the LMM approach to identify biological pathways associated with udder health and milk production traits in dairy cattle. A random gene sampling procedure was applied to assess the biological pathways in a dataset that has an inherently complex genetic correlation pattern due to the population structure of dairy cattle, and to linkage disequilibrium within the bovine genome and within the genes associated to the biological pathway. Several biological pathways that were significantly associated with health and production traits were identified in dairy cattle; i.e. the markers linked to these pathways explained more of the genomic variance and provided a better model fit than 95 % of the randomly sampled gene groups. Our results show that immune related pathways are associated with production traits, and that pathways that include a causal marker for production traits are identified with our procedure. We are confident that the LMM approach provides a general framework to exploit and integrate prior biological information and could potentially lead to improved understanding of the genetic architecture of complex traits and diseases.
- Open Access
- 24 September 2014
- Published by Springer Nature in BMC Bioinformatics
- Vol. 15 (1) , 315
A random set scoring model for prioritization of disease candidate genes using protein complexes and data-mining of GeneRIF, OMIM and PubMed records
Prioritizing genetic variants is a challenge because disease susceptibility loci are often located in genes of unknown function or the relationship with the corresponding phenotype is unclear. A global data-mining exercise on the biomedical literature can establish the phenotypic profile of genes with respect to their connection to disease phenotypes. The importance of protein-protein interaction networks in the genetic heterogeneity of common diseases or complex traits is becoming increasingly recognized. Thus, the development of a network-based approach combined with phenotypic profiling would be useful for disease gene prioritization. We developed a random-set scoring model and implemented it to quantify phenotype relevance in a network-based disease gene-prioritization approach. We validated our approach based on different gene phenotypic profiles, which were generated from PubMed abstracts, OMIM, and GeneRIF records. We also investigated the validity of several vocabulary filters and different likelihood thresholds for predicted protein-protein interactions in terms of their effect on the network-based gene-prioritization approach, which relies on text-mining of the phenotype data. Our method demonstrated good precision and sensitivity compared with those of two alternative complex-based prioritization approaches. We then conducted a global ranking of all human genes according to their relevance to a range of human diseases. The resulting accurate ranking of known causal genes supported the reliability of our approach. Moreover, these data suggest many promising novel candidate genes for human disorders that have a complex mode of inheritance. We have implemented and validated a network-based approach to prioritize genes for human diseases based on their phenotypic profile. We have devised a powerful and transparent tool to identify and rank candidate genes. Our global gene prioritization provides a unique resource for the biological interpretation of data from genome-wide association studies, and will help in the understanding of how the associated genetic variants influence disease or quantitative phenotypes.
- 24 September 2014
- Published by Springer Nature in BMC Bioinformatics
- Vol. 15 (1) , 315
Open AccessA random set scoring model for prioritization of disease candidate genes using protein complexes and data-mining of GeneRIF, OMIM and PubMed records
Prioritizing genetic variants is a challenge because disease susceptibility loci are often located in genes of unknown function or the relationship with the corresponding phenotype is unclear. A global data-mining exercise on the biomedical literature can establish the phenotypic profile of genes with respect to their connection to disease phenotypes. The importance of protein-protein interaction networks in the genetic heterogeneity of common diseases or complex traits is becoming increasingly recognized. Thus, the development of a network-based approach combined with phenotypic profiling would be useful for disease gene prioritization. We developed a random-set scoring model and implemented it to quantify phenotype relevance in a network-based disease gene-prioritization approach. We validated our approach based on different gene phenotypic profiles, which were generated from PubMed abstracts, OMIM, and GeneRIF records. We also investigated the validity of several vocabulary filters and different likelihood thresholds for predicted protein-protein interactions in terms of their effect on the network-based gene-prioritization approach, which relies on text-mining of the phenotype data. Our method demonstrated good precision and sensitivity compared with those of two alternative complex-based prioritization approaches. We then conducted a global ranking of all human genes according to their relevance to a range of human diseases. The resulting accurate ranking of known causal genes supported the reliability of our approach. Moreover, these data suggest many promising novel candidate genes for human disorders that have a complex mode of inheritance. We have implemented and validated a network-based approach to prioritize genes for human diseases based on their phenotypic profile. We have devised a powerful and transparent tool to identify and rank candidate genes. Our global gene prioritization provides a unique resource for the biological interpretation of data from genome-wide association studies, and will help in the understanding of how the associated genetic variants influence disease or quantitative phenotypes.