Carles Miravitlles
Research Subjects
Carles Miravitlles has a total of 353 co-authors. Here are the top co-authors by number of shared publications:
- Jordi Rius
Institut de Ciència de Materials de Barcelona, CSIC, Campus de la UAB, Bellaterra, Catalonia 08193, Spain
50 shared publications - Elies Molins
Department of Advanced Structural and Functional Crystallography Institut de Ciència de Materials de Barcelona (ICMAB‐CSIC) Cerdanyola del Vallès Barcelona Spain
45 shared publications - Francesc Teixidor
Institut de Ciència de Materials de Barcelona (ICMAB-CSIC), Campus UAB, 08193 Bellaterra, Spain
18 shared publications Elies Molins
Institut de Ciència de Materials (CSIC), Campus UAB, 08193 Cerdanyola, Spain
16 shared publicationsE. Molins
13 shared publicationsJaume Casabó
Departament de Quı́mica, Universitat Autònoma de Barcelona, Campus Universitari de Bellaterra, 08193-Cerdanyola, Barcelona, Spain
13 shared publications
Latest Publications
- Open Access
- 11 June 2015
- Published by International Union of Crystallography (IUCr) in IUCrJ
- Vol. 2 (4) , 452-463
Application of synchrotron through-the-substrate microdiffraction to crystals in polished thin sections
The synchrotron through-the-substrate X-ray microdiffraction technique (tts-μXRD) is extended to the structural study of microvolumes of crystals embedded in polished thin sections of compact materials [Rius, Labrador, Crespi, Frontera, Vallcorba & Melgarejo (2011).J.Synchrotron Rad.18, 891–898]. The resulting tts-μXRD procedure includes some basic steps: (i) collection of a limited number of consecutive two-dimensional patterns (frames) for each randomly oriented crystal microvolume; (ii) refinement of the metric from the one-dimensional diffraction pattern which results from circularly averaging the sum of collected frames; (iii) determination of the reciprocal lattice orientation of each randomly oriented crystal microvolume which allows assigning thehklindices to the spots and, consequently, merging the intensities of the different frames into a single-crystal data set (frame merging); and (iv) merging of the individual crystal data sets (multicrystal merging) to produce an extended data set suitable for structure refinement/solution. Its viability for crystal structure solution by Patterson function direct methods (δ recycling) and for accurate single-crystal least-squares refinements is demonstrated with some representative examples from petrology in which different glass substrate thicknesses have been employed. The section of the crystal microvolume must be at least of the same order of magnitude as the focus of the beam (15 × 15 µm in the provided examples). Thanks to its versatility and experimental simplicity, this methodology should be useful for disciplines as disparate as petrology, materials science and cultural heritage.
- 11 June 2015
- Published by International Union of Crystallography (IUCr) in IUCrJ
- Vol. 2 (4) , 452-463
Open AccessApplication of synchrotron through-the-substrate microdiffraction to crystals in polished thin sections
The synchrotron through-the-substrate X-ray microdiffraction technique (tts-μXRD) is extended to the structural study of microvolumes of crystals embedded in polished thin sections of compact materials [Rius, Labrador, Crespi, Frontera, Vallcorba & Melgarejo (2011).J.Synchrotron Rad.18, 891–898]. The resulting tts-μXRD procedure includes some basic steps: (i) collection of a limited number of consecutive two-dimensional patterns (frames) for each randomly oriented crystal microvolume; (ii) refinement of the metric from the one-dimensional diffraction pattern which results from circularly averaging the sum of collected frames; (iii) determination of the reciprocal lattice orientation of each randomly oriented crystal microvolume which allows assigning thehklindices to the spots and, consequently, merging the intensities of the different frames into a single-crystal data set (frame merging); and (iv) merging of the individual crystal data sets (multicrystal merging) to produce an extended data set suitable for structure refinement/solution. Its viability for crystal structure solution by Patterson function direct methods (δ recycling) and for accurate single-crystal least-squares refinements is demonstrated with some representative examples from petrology in which different glass substrate thicknesses have been employed. The section of the crystal microvolume must be at least of the same order of magnitude as the focus of the beam (15 × 15 µm in the provided examples). Thanks to its versatility and experimental simplicity, this methodology should be useful for disciplines as disparate as petrology, materials science and cultural heritage.
- Open Access
- 17 November 2014
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 549
Application of XLENS® program to neutron diffraction data: solving crystal structures with positive and negative scatterers
- 17 November 2014
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 549
Open AccessApplication of XLENS® program to neutron diffraction data: solving crystal structures with positive and negative scatterers
- 1 September 2013
- Published by Cambridge University Press (CUP) in Powder Diffraction
- Vol. 28 (S2) , S481-S490
Use of TALP with laboratory powder diffraction data from 2D detectors
The viability of the direct-space strategy TALP (Vallcorba et al. , 2012b) to solve crystal structures of molecular compounds from laboratory powder diffraction data is shown. The procedure exploits the accurate metric refined from a ‘Bragg-Brentano’ powder pattern to extract later the intensity data from a second ‘texture-free’ powder pattern with the DAJUST software (Vallcorba et al. , 2012a). The experimental setup for collecting this second pattern consists of a circularly collimated X-ray beam and a 2D detector. The sample is placed between two thin Mylar ® foils, which reduces or even eliminates preferred orientation. With the combination of the DAJUST and TALP software a preliminary but rigorous structural study of organic compounds can be carried out at the laboratory level. In addition, the time-consuming filling of capillaries with diameters thinner than 0.3mm is avoided.
- 1 September 2013
- Published by Cambridge University Press (CUP) in Powder Diffraction
- Vol. 28 (S2) , S481-S490
Use of TALP with laboratory powder diffraction data from 2D detectors
The viability of the direct-space strategy TALP (Vallcorba et al. , 2012b) to solve crystal structures of molecular compounds from laboratory powder diffraction data is shown. The procedure exploits the accurate metric refined from a ‘Bragg-Brentano’ powder pattern to extract later the intensity data from a second ‘texture-free’ powder pattern with the DAJUST software (Vallcorba et al. , 2012a). The experimental setup for collecting this second pattern consists of a circularly collimated X-ray beam and a 2D detector. The sample is placed between two thin Mylar ® foils, which reduces or even eliminates preferred orientation. With the combination of the DAJUST and TALP software a preliminary but rigorous structural study of organic compounds can be carried out at the laboratory level. In addition, the time-consuming filling of capillaries with diameters thinner than 0.3mm is avoided.
- 8 November 2012
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 45 (6) , 1270-1277
TALP: a multisolution direct-space strategy for solving molecular crystals from powder diffraction data based on restrained least squares
TALP is a new direct-space strategy forab initiocrystal structure determination of molecular crystals from powder diffraction data. The strategy is based on a preliminary exploration stage, which considers atomic overlap, followed by a subsequent stage of local incremental scans, both coupled to fast restrained least-squares minimizations with the atomic coordinates as refined parameters. The observed intensities are extracted from the powder pattern by a three-step procedure [Vallcorba, Rius, Frontera, Peral & Miravitlles (2012).J. Appl. Cryst.45, 844–848], and the molecular model and distance restraints are derived from molecular mechanics calculations or from similar reported structures. The solution process consists of several independent trials, each one resulting in a crystal structure proposal with an associated figure of merit. TALP has been tested on laboratory X-ray powder diffraction data of 14 molecular compounds of known crystal structure and of variable complexity. In most cases, the crystal structure is solved in a short time (less than an hour), even for calculated models. For the most complex structures (e.g.13 torsion angles), the general scan is assisted by a rotation function, which provides a ranked list of most probable model orientations. In this way only the positional and conformation parameters need to be explored.
- 8 November 2012
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 45 (6) , 1270-1277
TALP: a multisolution direct-space strategy for solving molecular crystals from powder diffraction data based on restrained least squares
TALP is a new direct-space strategy forab initiocrystal structure determination of molecular crystals from powder diffraction data. The strategy is based on a preliminary exploration stage, which considers atomic overlap, followed by a subsequent stage of local incremental scans, both coupled to fast restrained least-squares minimizations with the atomic coordinates as refined parameters. The observed intensities are extracted from the powder pattern by a three-step procedure [Vallcorba, Rius, Frontera, Peral & Miravitlles (2012).J. Appl. Cryst.45, 844–848], and the molecular model and distance restraints are derived from molecular mechanics calculations or from similar reported structures. The solution process consists of several independent trials, each one resulting in a crystal structure proposal with an associated figure of merit. TALP has been tested on laboratory X-ray powder diffraction data of 14 molecular compounds of known crystal structure and of variable complexity. In most cases, the crystal structure is solved in a short time (less than an hour), even for calculated models. For the most complex structures (e.g.13 torsion angles), the general scan is assisted by a rotation function, which provides a ranked list of most probable model orientations. In this way only the positional and conformation parameters need to be explored.
- 20 June 2012
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 45 (4) , 844-848
DAJUST: a suite of computer programs for pattern matching, space-group determination and intensity extraction from powder diffraction data
DAJUSTis the generic name of a software package for powder diffraction formed by the core programsAJUSTandSGAID(both written in Fortran) controlled by an easy-to-use Java user interface (DAJUST_UI). WhileAJUSTperforms whole-pattern matching (cell-parameter refinement, profile fitting and intensity extraction),SGAIDprovides a list of the most probable space groups. For the extraction of the integrated intensities,AJUSTuses the Le Bail procedure but with a different formula for refining the integrated intensities. Laboratory, synchrotron X-ray and neutron sources, and both reflection and transmission experimental geometries, are supported. Other program options include automated background estimation, asymmetry correction, and corrections for absorption, variable divergence and/or illumination. The extracted intensity data are written in text format and can be directly processed by the direct methods programXLENS[Rius (2011).Acta Cryst.A67, 63–67] and the multisolution direct-space structure determination programTALP[Vallcorba, Rius, Frontera & Miravitlles (2011).Acta Cryst.A67, C272].
- 20 June 2012
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 45 (4) , 844-848
DAJUST: a suite of computer programs for pattern matching, space-group determination and intensity extraction from powder diffraction data
DAJUSTis the generic name of a software package for powder diffraction formed by the core programsAJUSTandSGAID(both written in Fortran) controlled by an easy-to-use Java user interface (DAJUST_UI). WhileAJUSTperforms whole-pattern matching (cell-parameter refinement, profile fitting and intensity extraction),SGAIDprovides a list of the most probable space groups. For the extraction of the integrated intensities,AJUSTuses the Le Bail procedure but with a different formula for refining the integrated intensities. Laboratory, synchrotron X-ray and neutron sources, and both reflection and transmission experimental geometries, are supported. Other program options include automated background estimation, asymmetry correction, and corrections for absorption, variable divergence and/or illumination. The extracted intensity data are written in text format and can be directly processed by the direct methods programXLENS[Rius (2011).Acta Cryst.A67, 63–67] and the multisolution direct-space structure determination programTALP[Vallcorba, Rius, Frontera & Miravitlles (2011).Acta Cryst.A67, C272].
- 6 October 2011
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section C Crystal Structure Communications
- Vol. 67 (11) , o425-o427
(Z)-3-Methyl-N-(7-nitroacridin-3-yl)-2,3-dihydro-1,3-benzothiazol-2-imine from laboratory powder diffraction data
The title compound, C(21)H(14)N(4)O(2)S, belongs to a family of molecules possessing nonlinear optical properties in solution. Its structure has been solved from laboratory X-ray powder diffraction data using a new direct-space structure solution method, where the atomic coordinates are directly used as parameters and the molecular geometry is described by restraints. The molecular packing is controlled by two systems of π-π interactions and one weak edge-to-face interaction.
- 6 October 2011
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section C Crystal Structure Communications
- Vol. 67 (11) , o425-o427
(Z)-3-Methyl-N-(7-nitroacridin-3-yl)-2,3-dihydro-1,3-benzothiazol-2-imine from laboratory powder diffraction data
The title compound, C(21)H(14)N(4)O(2)S, belongs to a family of molecules possessing nonlinear optical properties in solution. Its structure has been solved from laboratory X-ray powder diffraction data using a new direct-space structure solution method, where the atomic coordinates are directly used as parameters and the molecular geometry is described by restraints. The molecular packing is controlled by two systems of π-π interactions and one weak edge-to-face interaction.
- 1 August 2008
- Published by Elsevier in Cement and Concrete Research
- Vol. 38 (8-9) , 1033-1037
Supercritical carbonation of calcium aluminate cement
- 1 August 2008
- Published by Elsevier in Cement and Concrete Research
- Vol. 38 (8-9) , 1033-1037
Supercritical carbonation of calcium aluminate cement
- 1 November 2004
- Published by Elsevier in Journal of Inorganic Biochemistry
- Vol. 98 (11) , 1703-1711
Ternary complexes metal [Co(II), Ni(II), Cu(II) and Zn(II)] – ortho-iodohippurate (I-hip) – acyclovir. X-ray characterization of isostructural [(Co, Ni or Zn)(I-hip)2(ACV)(H2O)3] with stacking as a recognition factor
- 1 November 2004
- Published by Elsevier in Journal of Inorganic Biochemistry
- Vol. 98 (11) , 1703-1711
Ternary complexes metal [Co(II), Ni(II), Cu(II) and Zn(II)] – ortho-iodohippurate (I-hip) – acyclovir. X-ray characterization of isostructural [(Co, Ni or Zn)(I-hip)2(ACV)(H2O)3] with stacking as a recognition factor
- 18 July 2003
- Published by Elsevier in Tetrahedron: Asymmetry
- Vol. 14 (14) , 2033-2039
Diels–Alder reactions of phenylglycinol-derived bicyclic lactams. Enantiodivergent synthesis of cis-hydroisoquinolines
- 18 July 2003
- Published by Elsevier in Tetrahedron: Asymmetry
- Vol. 14 (14) , 2033-2039
Diels–Alder reactions of phenylglycinol-derived bicyclic lactams. Enantiodivergent synthesis of cis-hydroisoquinolines