Hoang-Nam Nguyen
Research Subjects
Hoang-Nam Nguyen has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Pi-Ying Cheng
National Chiao Tung University
3 shared publicationsAn-Chen Lee
Department of Mechanical Engineering, National Chiao Tung University, Hsinchu, Taiwan 300, ROC
2 shared publicationsDang N. Khoa
Department of Electrical and Electronics Technology
2 shared publications- Do Van Thom
Le Quy Don Technical University
2 shared publications - Pham Van Vinh
Institute for Problems in Mechanical Engineering of the Russian Academy of Sciences, St. Petersburg, Russia
2 shared publications Phung V. Minh
Department of Mechanics
2 shared publications
Latest Publications
- Open Access
- 1 January 2019
- Published by Wiley in Advances in Civil Engineering
- Vol. 2019 (1)
Erratum to “A New Efficient Modified First‐Order Shear Model for Static Bending and Vibration Behaviors of Two‐Layer Composite Plate”
- 1 January 2019
- Published by Wiley in Advances in Civil Engineering
- Vol. 2019 (1)
Open AccessErratum to “A New Efficient Modified First‐Order Shear Model for Static Bending and Vibration Behaviors of Two‐Layer Composite Plate”
- Open Access
- 1 January 2019
- Published by Wiley in Advances in Civil Engineering
- Vol. 2019 (1)
A New Efficient Modified First‐Order Shear Model for Static Bending and Vibration Behaviors of Two‐Layer Composite Plate
A two‐layer (connected by stubs) partial composite plate is a structure with outstanding advantages which can be widely applied in many fields of engineering such as construction, transportation, and mechanical. However, studies are scarce in the past to investigate this type of structure. This paper is based on the new modified first‐order shear deformation plate theory and finite element method to develop a new four‐node plate element with nine degrees of freedom per node for static bending and vibration analysis of the two‐layer composite plate. The numerical results are compared to published data for some special cases. The effects of some parameters such as the boundary condition, stiffness of the connector stub, height‐to‐width ratio, thickness‐to‐thickness ratio between two layers, and aspect ratio are also performed to investigate new numerical results of static bending and free vibration responses of this structure.
- 1 January 2019
- Published by Wiley in Advances in Civil Engineering
- Vol. 2019 (1)
Open AccessA New Efficient Modified First‐Order Shear Model for Static Bending and Vibration Behaviors of Two‐Layer Composite Plate
A two‐layer (connected by stubs) partial composite plate is a structure with outstanding advantages which can be widely applied in many fields of engineering such as construction, transportation, and mechanical. However, studies are scarce in the past to investigate this type of structure. This paper is based on the new modified first‐order shear deformation plate theory and finite element method to develop a new four‐node plate element with nine degrees of freedom per node for static bending and vibration analysis of the two‐layer composite plate. The numerical results are compared to published data for some special cases. The effects of some parameters such as the boundary condition, stiffness of the connector stub, height‐to‐width ratio, thickness‐to‐thickness ratio between two layers, and aspect ratio are also performed to investigate new numerical results of static bending and free vibration responses of this structure.
- 14 February 2018
- Published by Springer Nature
- p. 638-648
Automatic Measurement of Concrete Crack Width in 2D Multiple-phase Images for Building Safety Evaluation
- 14 February 2018
- Published by Springer Nature
- p. 638-648
Automatic Measurement of Concrete Crack Width in 2D Multiple-phase Images for Building Safety Evaluation
- 22 October 2016
- Published by Springer Nature in Multidimensional Systems and Signal Processing
- Vol. 29 (1) , 213-244
Automatic crack detection from 2D images using a crack measure-based B-spline level set model
- 22 October 2016
- Published by Springer Nature in Multidimensional Systems and Signal Processing
- Vol. 29 (1) , 213-244
Automatic crack detection from 2D images using a crack measure-based B-spline level set model
- Open Access
- 1 December 2014
- Published by Academy of Taiwan Information Systems Research in International Journal of Electronic Commerce Studies
- Vol. 5 (2) , 247-256
DEFORMABLE MODEL USING RADIAL BASIS FUNCTIONS BASED LEVEL SET INTERPOLATION WITH AN ELLIPSE CONSTRAINT
- 1 December 2014
- Published by Academy of Taiwan Information Systems Research in International Journal of Electronic Commerce Studies
- Vol. 5 (2) , 247-256
Open AccessDEFORMABLE MODEL USING RADIAL BASIS FUNCTIONS BASED LEVEL SET INTERPOLATION WITH AN ELLIPSE CONSTRAINT
- 14 July 2013
- Published by Springer Nature in Journal of Signal Processing Systems
- Vol. 77 (3) , 221-240
An Automatic Approach for Accurate Edge Detection of Concrete Crack Utilizing 2D Geometric Features of Crack
- 14 July 2013
- Published by Springer Nature in Journal of Signal Processing Systems
- Vol. 77 (3) , 221-240
An Automatic Approach for Accurate Edge Detection of Concrete Crack Utilizing 2D Geometric Features of Crack
- 1 November 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 766-771
A novel automatic concrete surface crack identification using isotropic undecimated wavelet transform
Traditionally, concrete surface cracks are manually measured and recorded by experienced inspectors who observe cracks with their naked eye. This task is very costly, time-consuming and dangerous. Some automatic crack detection techniques utilizing image processing have been proposed. However, it is very difficult to automatically identify cracks sufficiently fast and accurate. This paper presents a novel automatic algorithm for effectively identifying cracks in concrete structures, which can be applied to high resolution photographs. Firstly, as cracks can be considered as elongated dark objects in concrete surface images, all dark objects are roughly identified using Isotropic Undecimated Wavelet Transform (IUWT) and morphological image processing. Secondly, all previous detected dark objects are classified into crack and non-crack objects by analyzing their cross section pixel intensity profiles, which are computed perpendicularly across their centre-lines in the original input image, using a novel method based on Savitzky-Golay filter. Therefore, both local and global changes in crack width can be readily quantified. Experiments show that our method can automatically detect true cracks in concrete surface images using a unique set of parameters.
- 1 November 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 766-771
A novel automatic concrete surface crack identification using isotropic undecimated wavelet transform
Traditionally, concrete surface cracks are manually measured and recorded by experienced inspectors who observe cracks with their naked eye. This task is very costly, time-consuming and dangerous. Some automatic crack detection techniques utilizing image processing have been proposed. However, it is very difficult to automatically identify cracks sufficiently fast and accurate. This paper presents a novel automatic algorithm for effectively identifying cracks in concrete structures, which can be applied to high resolution photographs. Firstly, as cracks can be considered as elongated dark objects in concrete surface images, all dark objects are roughly identified using Isotropic Undecimated Wavelet Transform (IUWT) and morphological image processing. Secondly, all previous detected dark objects are classified into crack and non-crack objects by analyzing their cross section pixel intensity profiles, which are computed perpendicularly across their centre-lines in the original input image, using a novel method based on Savitzky-Golay filter. Therefore, both local and global changes in crack width can be readily quantified. Experiments show that our method can automatically detect true cracks in concrete surface images using a unique set of parameters.
- 1 March 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3, 118-122
Crack Image Extraction Using a Radial Basis Functions Based Level Set Interpolation Technique
The extraction of crack images is an important process in the area of structural health monitoring for determining the severity of the damage induced by cracks. In this paper, a radial basis functions (RBFs) based level set interpolation technique is proposed to extract the images of cracks in structures. In the proposed method, the level set in the form of radial basis functions with an ellipse constraint can represent accurately various shapes without requiring building interior and exterior layers for the sparse mesh grid of RBFs centers or using information on contour/surface normal. The initial distance function embedded in the ellipse-constrained RBFs can be interpolated on a much coarser grid. Its deformation is considered as an updating of the RBFs coefficients by solving an ordinary differential equation (ODE) and a non-convex quadratically constrained quadratic programming (QCQP). The use of a semi-definite relaxation technique in solving the non-convex QCQP problem has shown that initialization and re-initialisation are no longer necessary. The images of a number of cracks have been extracted using the proposed method. It has been shown that the proposed method can extract crack images efficiently with coarse grid of RBFs centers and is also less sensitive to the distribution of the crack images in the domain.
- 1 March 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3, 118-122
Crack Image Extraction Using a Radial Basis Functions Based Level Set Interpolation Technique
The extraction of crack images is an important process in the area of structural health monitoring for determining the severity of the damage induced by cracks. In this paper, a radial basis functions (RBFs) based level set interpolation technique is proposed to extract the images of cracks in structures. In the proposed method, the level set in the form of radial basis functions with an ellipse constraint can represent accurately various shapes without requiring building interior and exterior layers for the sparse mesh grid of RBFs centers or using information on contour/surface normal. The initial distance function embedded in the ellipse-constrained RBFs can be interpolated on a much coarser grid. Its deformation is considered as an updating of the RBFs coefficients by solving an ordinary differential equation (ODE) and a non-convex quadratically constrained quadratic programming (QCQP). The use of a semi-definite relaxation technique in solving the non-convex QCQP problem has shown that initialization and re-initialisation are no longer necessary. The images of a number of cracks have been extracted using the proposed method. It has been shown that the proposed method can extract crack images efficiently with coarse grid of RBFs centers and is also less sensitive to the distribution of the crack images in the domain.
- 1 June 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 524-528
Object contour extraction using adaptive NURBS VFC active contour
We proposed a novel active contour model, adaptive NURBS VFC snake, for extracting complex object boundaries. This model enables local control as well as adaptive shape description capabilities for state-of-the-art VFC (vector field convolution) snake to capture complicated contours with high concavity regions. The active contour is expressed as a non-uniform rational B-spline (NURBS) with a novel approach to iteratively estimate the control points' positions and weight values in the snake' evolution process based on a two-steps linear NURBS fitting method. A proposed algorithm automatically defines the fit number of control points based on the Euclidean distance between two consecutive control points and their weight values. Experimental results demonstrate the capability of accurate adaptive shape description for complex object contour with high concavity regions, and advantages in capture range, and initialization insensitivity.
- 1 June 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 524-528
Object contour extraction using adaptive NURBS VFC active contour
We proposed a novel active contour model, adaptive NURBS VFC snake, for extracting complex object boundaries. This model enables local control as well as adaptive shape description capabilities for state-of-the-art VFC (vector field convolution) snake to capture complicated contours with high concavity regions. The active contour is expressed as a non-uniform rational B-spline (NURBS) with a novel approach to iteratively estimate the control points' positions and weight values in the snake' evolution process based on a two-steps linear NURBS fitting method. A proposed algorithm automatically defines the fit number of control points based on the Euclidean distance between two consecutive control points and their weight values. Experimental results demonstrate the capability of accurate adaptive shape description for complex object contour with high concavity regions, and advantages in capture range, and initialization insensitivity.
- 1 December 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 160-164
Real Time Tracking Multiple YUV 24-Bit Color Objects with 8-Bit MCU-Based Embedded Vision System
We propose a novel framework in which simple and suitable hardware design accompanied with effective software algorithm to boost the performance of an 8-bit MCU-based embedded vision system to the level of a PC-based one. Our goal is to build a small and low cost 8-bit MCU-based embedded vision system in the form of an intelligent sensor to track multiple YUV 24-bit color objects in real time. Our system uses Atmel AVR 8-bit microcontroller ATmega64, which was connected directly to the C3088 camera module using the Omnivision OV6620 CMOS image sensor, eliminating the need of a frame-grabber. It is a functioning vision system, with a well-defined interface that is accessible through a standard serial port, providing high-level, post-processed image information to a primary system (PC, another microcontroller, etc.).
- 1 December 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 160-164
Real Time Tracking Multiple YUV 24-Bit Color Objects with 8-Bit MCU-Based Embedded Vision System
We propose a novel framework in which simple and suitable hardware design accompanied with effective software algorithm to boost the performance of an 8-bit MCU-based embedded vision system to the level of a PC-based one. Our goal is to build a small and low cost 8-bit MCU-based embedded vision system in the form of an intelligent sensor to track multiple YUV 24-bit color objects in real time. Our system uses Atmel AVR 8-bit microcontroller ATmega64, which was connected directly to the C3088 camera module using the Omnivision OV6620 CMOS image sensor, eliminating the need of a frame-grabber. It is a functioning vision system, with a well-defined interface that is accessible through a standard serial port, providing high-level, post-processed image information to a primary system (PC, another microcontroller, etc.).